mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
ramips: add support for Linksys E7350
Linksys E7350 is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specifications: - SoC: MT7621 (880MHz, 2 Cores) - RAM: 256 MB - Flash: 128 MB NAND - Wi-Fi: - MT7915D: 2.4/5 GHz (DBDC) - Ethernet: 5x 1GiE MT7530 - USB: 1x USB 3.0 - UART: J4 (57600 baud) - Pinout: [3V3] (TXD) (RXD) (blank) (GND) Notes: * This device has a dual-boot partition scheme, but this firmware works only on boot partition 1. Installation: Upload the generated factory.bin image via the stock web firmware updater. Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit is contained in:
Rosen Penev
Hauke Mehrtens
parent
26a6a6a60b
commit
f4eef5f2a1
@ -52,6 +52,7 @@ h3c,tx1800-plus|\
|
||||
h3c,tx1801-plus|\
|
||||
h3c,tx1806|\
|
||||
jcg,q20|\
|
||||
linksys,e7350|\
|
||||
netgear,wax202)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
||||
;;
|
||||
|
||||
205
target/linux/ramips/dts/mt7621_linksys_e7350.dts
Normal file
205
target/linux/ramips/dts/mt7621_linksys_e7350.dts
Normal file
@ -0,0 +1,205 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "linksys,e7350", "mediatek,mt7621-soc";
|
||||
model = "Linksys E7350";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-wps {
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
function = LED_FUNCTION_WPS;
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power: led-power {
|
||||
label = "blue:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led-wan {
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-wan2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-lan4 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <4>;
|
||||
gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-lan3 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <3>;
|
||||
gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-lan2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-lan1 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Boot";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "Config";
|
||||
reg = <0x80000 0x80000>;
|
||||
};
|
||||
|
||||
factory: partition@100000 {
|
||||
label = "Factory";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "firmware";
|
||||
reg = <0x180000 0x3000000>;
|
||||
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
reg = <0x0 0x400000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "ubi";
|
||||
reg = <0x400000 0x2c00000>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@3180000 {
|
||||
label = "alt_firmware";
|
||||
reg = <0x3180000 0x3000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6180000 {
|
||||
label = "cbtinfo";
|
||||
reg = <0x6180000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
/* seems to be the end here. Can't read past 0x6200000 */
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1192,6 +1192,15 @@ define Device/linksys_e5600
|
||||
endef
|
||||
TARGET_DEVICES += linksys_e5600
|
||||
|
||||
define Device/linksys_e7350
|
||||
$(Device/belkin_rt1800)
|
||||
DEVICE_VENDOR := Linksys
|
||||
DEVICE_MODEL := E7350
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
||||
append-ubi | check-size | belkin-header GOLF 1 9.9.9
|
||||
endef
|
||||
TARGET_DEVICES += linksys_e7350
|
||||
|
||||
define Device/linksys_ea7xxx
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@ -75,6 +75,13 @@ gnubee,gb-pc2)
|
||||
linksys,e5600)
|
||||
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
|
||||
;;
|
||||
linksys,e7350)
|
||||
ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1"
|
||||
ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2"
|
||||
ucidef_set_led_netdev "lan3" "lan4" "blue:lan-3" "lan3"
|
||||
ucidef_set_led_netdev "lan4" "lan4" "blue:lan-4" "lan4"
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
||||
;;
|
||||
linksys,ea6350-v4|\
|
||||
linksys,ea7300-v1|\
|
||||
linksys,ea7300-v2|\
|
||||
|
||||
@ -205,7 +205,8 @@ ramips_setup_macs()
|
||||
wan_mac=$lan_mac
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
belkin,rt1800)
|
||||
belkin,rt1800|\
|
||||
linksys,e7350)
|
||||
lan_mac=$(mtd_get_mac_ascii Config lan_hwaddr)
|
||||
wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
|
||||
label_mac=$lan_mac
|
||||
|
||||
@ -84,7 +84,8 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
belkin,rt1800)
|
||||
belkin,rt1800|\
|
||||
linksys,e7350)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -23,6 +23,7 @@ boot() {
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
belkin,rt1800|\
|
||||
linksys,e7350|\
|
||||
samknows,whitebox-v8)
|
||||
fw_setenv bootcount 0
|
||||
;;
|
||||
|
||||
@ -71,6 +71,7 @@ platform_do_upgrade() {
|
||||
iptime,t5004|\
|
||||
jcg,q20|\
|
||||
linksys,e5600|\
|
||||
linksys,e7350|\
|
||||
linksys,ea6350-v4|\
|
||||
linksys,ea7300-v1|\
|
||||
linksys,ea7300-v2|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user