Commit Graph

42792 Commits

Author SHA1 Message Date
Koen Vandeputte
e80af4b53b kernel: bump 4.9 to 4.9.133
Refreshed all patches.

Compile-tested on: ar71xx, layerscape
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-16 10:08:54 +02:00
Koen Vandeputte
912340033a kernel: bump 3.18 to 3.18.124
Refreshed all patches.

Compile-tested: adm5120
Runtime-tested: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-16 10:06:45 +02:00
Kevin Darbyshire-Bryant
b8bc672f24 dnsmasq: bump to v2.80rc1
53792c9 fix typo
df07182 Update German translation.

Remove local patch 001-fix-typo which is a backport of the above 53792c9

There is no practical difference between our test8 release and this rc
release, but this does at least say 'release candidate'

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 08:39:21 +01:00
Hans Dedecker
39e5e17045 dnsmasq: fix compile issue
Fix compile issue in case HAVE_BROKEN_RTC is enabled

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-15 13:42:55 +02:00
Felix Fietkau
d251a11f60 ramips: refresh mt7621 kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-15 12:54:12 +02:00
Felix Fietkau
e34ea1b4ff kernel: add CONFIG_CC_OPTIMIZE_FOR_* to the default config
Avoid repeating them in the target config, they are overwritten by
top-level menuconfig anyway

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-15 12:54:00 +02:00
Daniel Golle
ed0d5a1e60 wolfssl: update to version 3.15.3-stable
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-10-15 08:41:02 +02:00
Felix Fietkau
055fb0ba83 mt76: move mt76x2e firmware to kmod-mt76x2-common and use it for mt76x2u
USB and PCIe devices can run the same firmware

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-14 18:47:44 +02:00
Hauke Mehrtens
759f111f8d tools: patch: Fix build by not modifing Makefile.am
A new test case was adding in one of the patches fixing a problem, this
also included a change in the test/Makefile.am to add this test case.
The build system detected a change in the Makefile.am and wants to
regenerate the Makefile.in, but this fails because automake-1.15 is not
installed yet. As automake depends on patch being build first, make sure
we do not modify the Makefile.am.

This fixes build problem seen by the build bots.

Fixes: 4797dddfde ("patch: apply upstream cve fixes")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 16:47:15 +02:00
Hauke Mehrtens
07e8c217cb tools: patch: make patch build depend on automake
The Makefile.am changed and now patch wants to use automake to
regenerate the Makefile.in. Make sure automake was build before we build
patch.

This fixes build problem seen by the build bots.
Fixes: 4797dddfde ("patch: apply upstream cve fixes")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 15:27:38 +02:00
Russell Senior
4797dddfde patch: apply upstream cve fixes
Apply two upstream patches to address two CVEs:

 * CVE-2018-1000156
 * CVE-2018-6952

Add PKG_CPE_ID to Makefile.

Build tested on apm821xx and ar71xx.

Signed-off-by: Russell Senior <russell@personaltelco.net>
2018-10-14 13:36:09 +01:00
Hauke Mehrtens
4c3fae4adc hostapd: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)
This adds support for the WPA3-Enterprise mode authentication.

The settings for the WPA3-Enterpriese mode are defined in
WPA3_Specification_v1.0.pdf. This mode also requires ieee80211w and
guarantees at least 192 bit of security.

This does not increase the ipkg size by a significant size.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:15 +02:00
Hauke Mehrtens
18c6c93a3b hostapd: Activate Opportunistic Wireless Encryption (OWE)
OWE is defined in RFC 8110 and provides encryption and forward security
for open networks.

This is based on the requirements in the Wifi alliance document
Opportunistic_Wireless_Encryption_Specification_v1.0_0.pdf
The wifi alliance requires ieee80211w for the OWE mode.
This also makes it possible to configure the OWE transission mode which
allows it operate an open and an OWE BSSID in parallel and the client
should only show one network.

This increases the ipkg size by 5.800 Bytes.
Old: 402.541 Bytes
New: 408.341 Bytes

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:15 +02:00
Hauke Mehrtens
4a009a16d2 hostapd: Activate Simultaneous Authentication of Equals (SAE)
This build the full openssl and wolfssl versions with SAE support which
is the main part of WPA3 PSK.

This needs elliptic curve cryptography which is only provided by these
two external cryptographic libraries and not by the internal
implementation.

The WPA3_Specification_v1.0.pdf file says that in SAE only mode
Protected Management Frames (PMF) is required, in mixed mode with
WPA2-PSK PMF should be required for clients using SAE, and optional for
clients using WPA2-PSK. The defaults are set now accordingly.

This increases the ipkg size by 8.515 Bytes.
Old: 394.026 Bytes
New: 402.541 Bytes

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:15 +02:00
Hauke Mehrtens
a1ad1144b6 hostapd: SAE: Do not ignore option sae_require_mfp
This patch was send for integration into the hostapd project.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:14 +02:00
Hauke Mehrtens
779773a0de hostapd: backport build fix when OWE is activated
This backports a compile fix form the hostapd project.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:14 +02:00
Hauke Mehrtens
4b93b03577 hostapd: sync config with default configuration
This replaces the configuration files with the versions from the hostapd
project and the adaptions done by OpenWrt.

The resulting binaries should be the same.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:14 +02:00
Hauke Mehrtens
8f7a2bd084 netifd: update to latest git HEAD
22476ff wireless: Add Simultaneous Authentication of Equals (SAE)
c6c3a0d wireless: Add Opportunistic Wireless Encryption (OWE)
a117e41 wireless: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:08 +02:00
Florian Eckert
71865200c9 uqmi: fix variable initilization for timeout handling
Also add logging output for SIM initilization.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-12 09:36:05 +02:00
Felix Fietkau
e220ffb533 mac80211: fix A-MSDU packet handling with TCP retransmission
Improves local TCP throughput and fixes use-after-free bugs that could lead
to crashes.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-11 18:42:54 +02:00
Rafał Miłecki
f00cb94f7c bcm53xx: add pending pinctrl driver
It's required to support devices using adjustable SoC pins for some
specific purpose (e.g. I2C, PWM, UART1).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-10-11 14:19:22 +02:00
Robert Marko
b1ab8fac5a ath10k-ct: Update to 29-09-2018
Update ath10k-ct to be able to drop 210-ath10k-fix-recent-bandwidth-conversion-bug.patch
as its upstream.

b9989fbd5d6e ath10k-ct: Add upstream patch to fix peer rate reporting.
ac9224344dbf ath10k-ct: Support sending custom frames with no-ack flag.
bc938bc2021e ath10k-ct: Support sending pkts with specific rate on 10.4 firmware.

Runtime tested on:
- GL-iNet GL-B1300
- Mikrotik RB912 + QCA9882

Signed-off-by: Robert Marko <robimarko@gmail.com>
[Added list of all changes from previous version + add own test device]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-11 12:52:27 +02:00
Florian Eckert
4cabda8b7d uqmi: update PKG_RELEASE version
update PKG_RELEASE

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
0c9d06b5b2 uqmi: stop proto handler if verify pin count is not 3
Check pin count value from pin status and stop verification the pin if
the value is less then 3. This should prevent the proto-handler to
lock the SIM. If SIM is locked then the PUK is needed.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
4b80bd878d uqmi: evaluate pin-status output in qmi_setup function
Load the json output from uqmi --get-pin-status command and evaluate the
"pin1_status" value.

The following uqmi "pin1_status" values are evaluated:

- disabled
  Do not verify PIN because SIM verification is disabled on this SIM

- blocked
  Stop qmi_setup because SIM is locked and a PUK is required

- not_verified
  SIM is not yet verified. Do a uqmi --verify-pin1 command if a SIM is
  specified

- verified:
  Do not verify the PIN because this was already done before

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
f171a86d06 uqmi: do not block proto handler if SIM is uninitialized
QMI proto setup-handler will wait forever if SIM does not get initialized.
To fix this stop polling pin status and notify netifd. Netifd will generate
then a "ifup-failed" ACTION.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
dec1bfa0f4 uqmi: do not block proto handler if modem is unable to registrate
QMI proto setup-handler will wait forever if it is unable to registrate to
the mobile network. To fix this stop polling network registration status
and notify netifd. Netifd will generate then a "ifup-failed" ACTION.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
dee93def39 uqmi: add timeout option value
This value will be used for now during following situations:
* Ask the sim with the uqmi --get-pin-status command.
* Wait for network registration with the uqmi --get-serving-system command.

This two commands wait forever in a while loop. Add a timeout to stop
waiting and so inform netifd.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
2d57aa9c4c uqmi: redirect uqmi commands output to /dev/null
Move uqmi std and error output on commands without using them to /dev/null.
This will remove useless outputs in the syslog.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
692c6d9a5d uqmi: fix indenting
fix indenting

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Rafał Miłecki
92de28b751 bcm53xx: replace SPI revert with a fix sent upstream
Instead of reverting whole commit it's enough to just revert a single
line change. It seems the real problem with the regressing commit was a
bump of read chunk size. Switching back to 256 B chunks is enough to fix
the problem/regression.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-10-11 10:04:46 +02:00
John Crispin
d24bdaa794 procd: update to latest git HEAD
94944ab procd: Add cpu string to board detection

Signed-off-by: John Crispin <john@phrozen.org>
2018-10-11 08:42:52 +02:00
John Crispin
3e8ef61c01 package/: fix $(PROJECT_GIT) usage
Signed-off-by: John Crispin <john@phrozen.org>
2018-10-11 08:42:52 +02:00
Rosen Penev
82d272efed procd: Install hotplug files as 600
procd runs as root, so it only makes sense that its files are restricted.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:43 +02:00
Rosen Penev
4572d996a4 linux-atm: Install hotplug file as 600
The hotplug files is only used by procd, which runs as root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:35 +02:00
Rosen Penev
c7144ec688 comgt: Install hotplug and netifd files as 600
procd and netifd both run as root. These files are not used elsewhere.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:28 +02:00
Rosen Penev
f5ddbd695b samba36: Install several config files as 600
Hotplug is managed by procd, which runs as root. The other files are used
by root as well.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:18 +02:00
Rosen Penev
745c3acd64 soloscli: Install hotplug file as 600
Hotplug is managed by procd, which runs as root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:09 +02:00
Rosen Penev
49065d227a firewall: Install config files as 600
None of the files in firewall are used by non-root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:05:41 +02:00
Magnus Kroken
ba826ce4e7 mpc85xx: remove kernel 4.9 support
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-10-11 08:04:10 +02:00
Magnus Kroken
650806d83a mpc85xx: switch to kernel 4.14
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-10-11 08:04:02 +02:00
Magnus Kroken
c83c180489 mpc85xx: add kernel 4.14 support
Based on patches previously submitted by Achim Gottinger:
http://lists.infradead.org/pipermail/openwrt-devel/2018-June/012719.html

Tested on TP-Link TL-WDR4900 v1.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-10-11 08:03:56 +02:00
Koen Vandeputte
f4b7dfcc4b netfilter: add missing dependency for kernel 4.14
Since kernel 4.14.75 commit ("netfilter: xt_cluster: add dependency on conntrack module")
a dependency is required on kmod-nf-conntrack.

It seems this was already present for kmod-ipt-clusterip
but not yet for kmod-ipt-cluster

Add it fixing a build error when including kmod-ipt-cluster:

Package kmod-ipt-cluster is missing dependencies for the following libraries:
nf_conntrack.ko
modules/netfilter.mk:665: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk' failed
make[3]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk] Error 1
make[3]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt/package/kernel/linux'
Command exited with non-zero status 2
time: package/kernel/linux/compile#1.80#0.05#2.07
package/Makefile:107: recipe for target 'package/kernel/linux/compile' failed
make[2]: *** [package/kernel/linux/compile] Error 2
make[2]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt'
package/Makefile:103: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile' failed
make[1]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt'
/mnt/ramdisk/koen/firmware/builds/openwrt/include/toplevel.mk:216: recipe for target 'world' failed
make: *** [world] Error 2

Fixes: f983956a8b ("kernel: bump 4.14 to 4.14.75")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.14.75&id=b969656b46626a674232c0eadf92a394b89df07c
2018-10-10 17:33:04 +02:00
Koen Vandeputte
13f283198e ar71xx: remove linux 4.9 support
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-10 15:12:01 +02:00
Koen Vandeputte
77d004de6d ar71xx: switch to kernel 4.14
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-10 14:45:11 +02:00
Koen Vandeputte
f983956a8b kernel: bump 4.14 to 4.14.75
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-10 14:45:11 +02:00
Koen Vandeputte
571fe28464 kernel: bump 4.9 to 4.9.132
Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-10 14:45:11 +02:00
Felix Fietkau
212aa33226 kernel: enable memory compaction
Compaction is the only memory management component to form high order (larger
physically contiguous) memory blocks reliably. The page allocator relies on
compaction heavily and the lack of the feature can lead to unexpected OOM
killer invocations for high order memory requests. You shouldn't disable this
option unless there really is a strong reason for it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz>
2018-10-09 14:29:55 +02:00
Felix Fietkau
567fe53230 mt76: fix typo in kmod-mt76x0u package description
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-09 14:16:03 +02:00
Felix Fietkau
1e8882585c kernel: support gcc-optimized inlining on all architectures
Optimized inlining was disabled by default when gcc 4 was still
relatively new. By now, all gcc versions handle this well and there
seems to be no real reason to keep it x86-only.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-09 14:15:53 +02:00