Commit Graph

29351 Commits

Author SHA1 Message Date
John Crispin
e553dfc356 oxnas: re-add support for kernel 3.14
This reverts commit c81ddddde5fd193802d511b42eb7b108aac17136 on
https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git
which removed patches and config for 3.14.

[arm_introduce-dma-fiq-irq-broadcast patch was renamed to match 3.18]

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43520
2014-12-05 00:20:41 +00:00
John Crispin
dcc8a8ca9e octeon: add support for 3.18 kernel
Runtime tested on Ubiquiti EdgeRouter Lite.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43519
2014-12-05 00:20:10 +00:00
John Crispin
6f665ea7b8 octeon: sysupgrade: support config restore
SVN-Revision: 43518
2014-12-05 00:19:59 +00:00
John Crispin
28a9d9853b octeon: sysupgrade: get rootfsdev from kernel cmdline
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43517
2014-12-05 00:19:46 +00:00
John Crispin
e6858f5f3f amazon: R.I.P.
its been broken for 2 1/2 years

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43516
2014-12-05 00:19:40 +00:00
John Crispin
e1c6ddfd20 kernel/modules: remove unused variable
https://dev.openwrt.org/ticket/18472

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43515
2014-12-05 00:19:28 +00:00
John Crispin
d04c4a311e ralink: mt7621 is a 1004Kc
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43514
2014-12-03 20:22:42 +00:00
John Crispin
19a6f3dd11 procd: more nand takeover fixes
if the initramfs kernel and payload were flashed in one block, the payload might not be at the start of the ubi partition due to bad blocks inside the kernel partition.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43513
2014-12-03 20:22:37 +00:00
John Crispin
c3bb3906ee mtd: make the dump commnd honour the -o option
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43512
2014-12-03 20:22:32 +00:00
Felix Fietkau
426467beba kernel: add missing null pointer check for mips dma ops inline patch on 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43511
2014-12-03 18:17:17 +00:00
John Crispin
6ad5109211 uboot-envtools: use environment stored in UBI also for KD20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43510
2014-12-03 16:05:23 +00:00
John Crispin
871e0a6316 uboot-oxnas: adjust digtial drive strength of IC+ phy
This is what the vendor bootloader does on KD20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43509
2014-12-03 16:05:17 +00:00
John Crispin
60edf49f7b uboot-oxnas: re-add IC+ phy driver
KD20 got an IC+ phy, without the driver the phy is not properly
initialized resulting in ethernet not working unless being already
initialized by the vendor loader.

upstream commit 368b4d2b49bbbf379d9334747fbbd2aaaafe4356
drivers: net: remove dead drivers
removed icplus.c due to the lack of in-tree users.
Partially revert that commit adding back the IC+ driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43508
2014-12-03 16:05:11 +00:00
John Crispin
a21c9fd655 kernel: make the ubi attach patch check for a valid ubi magic rather than a tar magic
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43507
2014-12-03 16:05:06 +00:00
John Crispin
a10a204aab kernel: make ubi auto-attach check for a tar file magic
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43506
2014-12-03 14:32:38 +00:00
John Crispin
68909fb081 procd: firstboot nand/ubi takeover support
it is now possible to flash a initramfs kernel and a sysupgrade tar file inside the ubi partition. on first boot, the takeover script will find the tar file, extract and finally sysupgrade it. this allows us to flash owrt/ubi images in a 2 phase setup using ODM webuis that are not ubi aware. this is needed by some mediatek and brokencom devices.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43505
2014-12-03 14:32:32 +00:00
John Crispin
1e8a83e553 uqmi: Add --delete-message for deleting SMS messages
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43504
2014-12-03 09:17:28 +00:00
John Crispin
ff02ea36e0 mtd: make the mtd dump call run properly on nand flash
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43503
2014-12-02 19:28:23 +00:00
Felix Fietkau
5331a85501 kernel/modules: package xhci for kernel>=3.18
xhci-hcd was split into xhci-pci and xhci-platform since 3.18

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43502
2014-12-02 19:26:45 +00:00
John Crispin
8a9979e57a gemini: update ethernet driver, register ethernet on nas4220 board
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43501
2014-12-02 18:27:54 +00:00
John Crispin
da988d582f mtd: add ability to dump a mtd device
this can be used on nand flashes and will skip bad blocks and run ecc on the
read data before dumping it.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43500
2014-12-02 18:27:49 +00:00
John Crispin
283d7789ee uboot-oxnas: bump to U-Boot 2014.10
A few trivial changes were needed to adapt to upstream framework changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43499
2014-12-02 15:25:37 +00:00
John Crispin
a122c1c9c9 oxnas: switch CRC32 implementation to SLICEBY8
similar to what was observed on kirkwood this significantly accelerates
btrfs write operations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43498
2014-12-02 15:25:28 +00:00
John Crispin
9430e86b61 oxnas/kd20: add usb-storage to default package set
KD20 got a built-in card-reader wired to the USB-3 root-hub.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43497
2014-12-02 15:25:14 +00:00
John Crispin
46814be2a8 oxnas/kd20: use gpio-beeper
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43496
2014-12-02 15:25:09 +00:00
John Crispin
c2e57fcb2f kernel/modules: package gpio-beeper
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43495
2014-12-02 15:25:03 +00:00
John Crispin
ae51d64671 au1000: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43494
2014-12-02 15:23:37 +00:00
John Crispin
5698e62ecb opkg: the PKG_UPGRADE env was not set properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43493
2014-12-02 15:21:50 +00:00
John Crispin
3b1b3c5067 procd: drop the zram dependencies, theu caused a recursive deps warning
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43492
2014-12-02 13:16:06 +00:00
Felix Fietkau
f11b61ae18 realview: refresh kernel patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43491
2014-12-02 13:14:59 +00:00
John Crispin
b1bc985d57 procd: reintroduce /sys/fs/cgroup mount
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43490
2014-12-02 12:41:15 +00:00
John Crispin
43131d62a8 procd: add support for zram compressed /tmp
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43489
2014-12-02 11:13:28 +00:00
John Crispin
417e67b6b1 realview: fix up the phyoffset patch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43488
2014-12-01 21:45:18 +00:00
John Crispin
b5675ad92a kirkwood: enable mvsw6171 switch driver on EA4500
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43487
2014-12-01 21:30:40 +00:00
John Crispin
9b5f583906 kernel: add driver for Marvell 88E6171 switch
This is a swconfig driver for the Marvell 88E6171 switch,
which is a 7-port GigE switch with two CPU ports and 64
802.1q VLANs.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43486
2014-12-01 21:30:35 +00:00
Felix Fietkau
b8dd6bb189 fstools: update to the latest version, fixes sysupgrade on linux 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43485
2014-12-01 21:10:42 +00:00
Felix Fietkau
03b49664e5 ath10k: init devices synchronously to fix wifi detection at boot
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43484
2014-12-01 20:01:05 +00:00
Felix Fietkau
fe05893ffb openvpn: update to 2.3.6, fixes CVE-2014-8104
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43482
2014-12-01 19:49:59 +00:00
John Crispin
374f8a04e1 malta: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43481
2014-12-01 18:46:29 +00:00
John Crispin
4c044e8118 fstools: make the block tool ignore case when comparing uuid strings
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43480
2014-12-01 18:46:23 +00:00
Felix Fietkau
d1c0a65266 kernel: update 3.18 to rc7
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43479
2014-12-01 17:38:54 +00:00
John Crispin
70c3a60947 util-linux: fix more missing dependencies introduced by r43459
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43478
2014-12-01 16:50:43 +00:00
John Crispin
2dad4c2e07 uqmi: fix SEGFAULT on reading Unicode sms messages
Added complementary blobmsg_close_table() before returning from function
on error.

Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com>

SVN-Revision: 43477
2014-12-01 16:23:55 +00:00
John Crispin
afbbf3084d util-linux: fix missing dependency introduced by r43459
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43476
2014-12-01 16:18:15 +00:00
John Crispin
ad1592e02c oxnas: change visible board name
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43475
2014-12-01 16:15:37 +00:00
John Crispin
aa9141046f oxnas: ehci: rename vendor prefix plxtch to plxtech
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43474
2014-12-01 16:15:30 +00:00
John Crispin
d40842d180 hostapd: improve 802.1x dynamic vlan support with bridge names
In r41872 and r42787 Dynamic VLAN support was reintroduced, but the vlan_bridge
parameter is not read while setting up the config, so the default is used which
is undesirable for some uses.

Signed-off-by: Ben Franske <ben.mm@franske.com>

SVN-Revision: 43473
2014-12-01 16:15:20 +00:00
John Crispin
b0d2a9e77a base-files: default_postinst() - create user:group first (resend)
create user:group before running postinst-pkg. the postinst hook might require
the user:group to already exist.

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 43472
2014-12-01 16:15:13 +00:00
John Crispin
ecd27db757 ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43471
2014-12-01 16:15:08 +00:00
John Crispin
ae15531bd2 ar8216: factor out mii_lo_first to ar8xxx_chip
Factor out mii_lo_first to ar8xxx_chip.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43470
2014-12-01 16:15:02 +00:00