Commit Graph

58815 Commits

Author SHA1 Message Date
Shiji Yang
6f31941d38 Revert "ramips: convert MT7915 EEPROM to NVMEM format"
Some MT7915 devices need to load the second part of the eeprom to
work properly. The mt76 driver is not yet ready to read the pre-cal
data via the NVMEM cell. Therefore, partially revert commit to fix
the device probe issue on some devices.

P.S.
Except for D-Link and Ubnt devices, It is still uncertain whether
pre-cal data is required for other devices in the patch.

This partially reverts commit 9ac891f8c4.

Fixes: https://github.com/openwrt/openwrt/issues/13700
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 20:57:07 +08:00
Shiji Yang
9921973ca4
ramips: add missing mt76 packages for Telco Electronics X1
Telco Electronics X1 has MT7603E and MT7612E PCIe NICs. They are
driven by kmod-mt7603 and kmod-mt76x2.

Ref: 73e0f52b6e ("ramips: add support for Telco Electronics X1")
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:28 +02:00
Shiji Yang
366ffa53bd
ramips: fix factory partition size for SNR-CPE-W4N
The starting address of 'factory' partition is 0x40000, and the
starting address of the next partition is 0x50000. It's obvious
that the correct size for the 'factory' is 0x10000, just like
other MT7620 devices.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:28 +02:00
Shiji Yang
b5d059d677
ramips: fix frequency limit property for some Edimax devices
These three devices uses MT7612E PCIe NIC and supported by the
'mt76' driver. So the right frequency limit property should be
`ieee80211-freq-limit`.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:27 +02:00
Shiji Yang
95e241d2af
ramips: remove useless status property from wmac dts node
On the ramips target, all 'wmac' nodes in SoC dtsi are enabled by
default except mt7628. There is no need to mark them as 'okay'
again. So these useless properties can be removed.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:27 +02:00
Shiji Yang
f53fa2a0cb
ramips: convert mt76 PCIe NIC EEPROM to NVMEM format for legacy SoCs
This patch converts MT761{0,2,3} PCIe WiFi calibration data to NVMEM
format for legacy Ralink SoCs (MT7620 and Mt7628). The EEPROM size of
the MT7610 and MT7612 is 0x200. there are only three devices uses
MT7613 NIC, ASUS RT-AC1200 V2, COMFAST CF-WR758AC V2 and Keenetic
KN-1613. The EEPROM size of them is 0x4da8.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:27 +02:00
Shiji Yang
e93f41adee
ramips: convert MT7628 EEPROM to NVMEM format
This patch converts MT7628 WiFi calibration data to NVMEM format. The
EEPROM size is 0x400.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:26 +02:00
Shiji Yang
da42c329c6
ramips: convert rt2x00 EEPROM to NVMEM format
This patch converts legacy Ralink SoCs and MT7620 WiFi calibration
data to NVMEM format. The EEPROM size is 0x200.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:26 +02:00
Shiji Yang
f35ddef268
ramips: fix mtd partition node names for Phicomm PSG1208
The mtd partition node name should be "partition@${offset}".
However, the offsets of the PSG1208 don't match the partition
'reg' properties. This patch correct the wrong offsets.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:26 +02:00
Shiji Yang
7668fc8112
ramips: fix DTS EEPROM property for some MT7628 devices
The MT7628 integrated wireless is driven by `mt76`, so the right
EEPROM property name is `mediatek,mtd-eeprom`.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:26 +02:00
Shiji Yang
58502650e1
ramips: convert the remaining mtd-mac-address to NVMEM format
`mtd-mac-address` has been abandoned. Therefore, convert them to
NVMEM format. This patch also removes some useless mtd-mac-address
properties.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 12:07:22 +02:00
Nick Hainke
c9e6831a89 gmp: update to 6.3
Release Notes:
https://gmplib.org/gmp6.3

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-17 11:05:16 +02:00
Nick Hainke
79e9bdda68 zlib: update to 1.3
Changes in 1.3 (18 Aug 2023)
- Remove K&R function definitions and zlib2ansi
- Fix bug in deflateBound() for level 0 and memLevel 9
- Fix bug when gzungetc() is used immediately after gzopen()
- Fix bug when using gzflush() with a very small buffer
- Fix crash when gzsetparams() attempted for transparent write
- Fix test/example.c to work with FORCE_STORED
- Rewrite of zran in examples (see zran.c version history)
- Fix minizip to allow it to open an empty zip file
- Fix reading disk number start on zip64 files in minizip
- Fix logic error in minizip argument processing
- Add minizip testing to Makefile
- Read multiple bytes instead of byte-by-byte in minizip unzip.c
- Add memory sanitizer to configure (--memory)
- Various portability improvements
- Various documentation improvements
- Various spelling and typo corrections

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-17 11:05:08 +02:00
Nick Hainke
dd43a89f77 binutils: update to 2.41
Release Notes:
https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00009.html

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-17 11:05:00 +02:00
Robert Marko
1c7fd93fc2 qualcommax: ipq8074: use upstreamed CPUFreq NVMEM support
IPQ8074 CPUFreq NVMEM support has finally landed upstream, so lets use the
upstreamed version.

This has a benefit of also supporting IPQ8174 (Oak) family for which SMEM
SoC ID-s were also upstreamed.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-10-16 19:22:11 +02:00
Christian Marangi
e0ac782a5e
lantiq: update binding for ralink EEPROM swap
Binding for ralink EEPROM swap changed from ralink,mtd-eeprom-swap to
ralink,eeprom-swap.

Update every entry.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-10-16 14:16:58 +02:00
Christian Marangi
bea4f50207
mac80211: rt2x00: improve EEPROM load patches
Improve EEPROME load patches. Reorganize and rework them.

The current patch are bugged and with the case of MTD loading, leaks and
never free the EEPROM read values.

Also add support for loading EEPROM using NVMEM cells.

As a cleanup, change the binding to swap EEPROM read from mtd to
ralink,eeprom-swap and generilize it.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-10-16 14:16:55 +02:00
Bjørn Mork
2e57028424
ramips: fix ZyXEL NR7101 bricking typo
A typo snuck in with the addition of Cudy M1800, changing
"nr7101" to "nt7101". The result is a default network config
for NR7101 without the only ethernet interface on the NR7101,
thereby soft bricking it.

Fixes: f6d394e9f2 ("ramips: add support for Cudy M1800")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2023-10-15 19:28:59 +02:00
Robert Marko
f8ea89c2d4 qualcommax: add pending GPLL parent fixes
SBL will configure IPQ807x cores to boot at 800MHz as a safe default
frequency that is provided by GPLL0, but GPLL0 is not currently configured
as a possible parent in the APSS clock driver not being passed to it via
DTS which will then cause the kernel to not properly identify the current
CPU frequency during booting and will think that CPU is currently at XO
frequency of 19.2MHz instead of 800MHz cores are actually at and print:
cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz

So, lets import patches pending upstream to prevent GPLL scaling and feed
the GPLL0 clock to APSS clock driver so we get:
cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz

This is mostly cosmetic fix, but with all of the possible SBL and FW
versions there could be edge cases resolved by this and not scaling GPLL-s
anymore.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-10-15 17:29:39 +02:00
John Audia
b357564463 kernel: bump 6.1 to 6.1.57
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.57

Manually rebased:
	generic/pending-6.1/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch

Removed upstreamed:
	qualcommax/patches-6.1/0134-PCI-qcom-Fixing-broken-pcie-enumeration-for-2_3_3-co.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.57&id=2dfb5f324d799f4545e17631415aba6d302a8e2b

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
2023-10-14 15:51:53 +02:00
John Audia
ccf24b5dcd config-6.1: disable CONFIG_ARM64_ERRATUM_2966298
Disable new ksym globally as OpenWrt does not have any targets that
use A520 cores.

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
2023-10-14 15:51:44 +02:00
Hauke Mehrtens
9e1c5ad4b0 mbedtls: Update to version 2.28.5
This fixes some minor security problems.
Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/mbedtls-2.28.5

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-10-14 15:48:31 +02:00
Robert Marko
359a6e36e9 mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.

All of the changes are various bugfixes, there is no new major feature.
Notable bugfixes are:
* WCN6855 board name fixes
* One MSI vector booting is working again
This is rather important for most of the older platforms.

* DFS CAC state in virtual interfaces was fixed
* TX power during CAC reporting

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-10-14 08:26:56 +02:00
Robert Marko
aab2e6d9ae mac80211: backport upstream DFS CAC time export
DFS CAC time export is required for backport of a ath11k fix so lets
backport the required cfg80211 upstream commit as well.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-10-14 08:26:56 +02:00
Nick Hainke
d19bf76da1 tools/mtd-utils: update to 2.1.6
Release Notes:
https://lists.infradead.org/pipermail/linux-mtd/2023-August/100922.html

Refresh patch:
- 110-portability.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-14 08:03:06 +02:00
Nick Hainke
5b85c19642 iproute2: update to 6.5.0
Release Notes:
https://lore.kernel.org/netdev/20230906093918.394a1b1d@hermes.local/T/

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-14 08:01:56 +02:00
Nick Hainke
abe908ca53 ethtool: update to 6.5
Release Notes:
https://lore.kernel.org/netdev/20230912223336.zywfpavr3ln3trp3@lion.mk-sys.cz/T/

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-14 08:01:45 +02:00
Nick Hainke
316b8e0909 strace: update to 6.5
Release Notes:
https://github.com/strace/strace/releases/tag/v6.5

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-14 08:01:34 +02:00
Nick Hainke
f5e66b5fd9 tools/mold: update to 2.2.0
Release Notes:
https://github.com/rui314/mold/releases/tag/v2.2.0

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-14 08:01:24 +02:00
Koen Vandeputte
9188c77cbe ath79: wpj563: enable 2nd USB controller
The compex WPJ563 actually has both usb controllers wired:

usb0 --> pci-e slot
usb1 --> pin header

As the board exposes it for generic use, enable this controller too.

fixes: #13650
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
2023-10-13 17:47:48 +02:00
Michael Pratt
518923178c tools/cmake: disable cmake script debugger
Upstream commit a9a592f96e6498da302f8e968be1db0ad3c32123
("cmake: Add debugger") added a huge amount of code
in order to create a debugging feature for CMakeLists.txt
of other projects. This was added to CMake since 3.27.x.

Unforunately, this new debugger will not build on ARM systems
like arm-linux-gnueabihf (Raspberry Pi 4), and takes up
extra build time for something Openwrt doesn't need,
yet it was enabled by default. (Thanks Microsoft....)

Specifically, it's a failure to link to functions like
__atomic_store_8, __atomic_load_8, __atomic_fetch_add_8, etc.

Let's just disable it.

Someone who really needs this for developing can have CMake
with the debugger on their host machine or manually re-enable it here.

Link: https://gitlab.kitware.com/cmake/cmake/-/issues/21510
Link: https://devblogs.microsoft.com/cppblog/cmake-debugger-allows-you-to-debug-your-cmake-scripts-and-more/
Signed-off-by: Michael Pratt <mcpratt@pm.me>
2023-10-13 09:27:18 +02:00
Rani Hod
802a5f5cb4 bcm53xx: build a single device per profile
So far every build of a single bcm53xx Target Profile (it means: when
NOT using CONFIG_TARGET_MULTI_PROFILE) resulted in all target devices
images being built. Now it only builds the one matching selected
profile.

Fixes: #13572

Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Rani Hod <rani.hod@gmail.com>
[rmilecki: update commit subject + body & move PROFILES line]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-10-13 07:32:22 +02:00
Nick Hainke
4e5d45f1e6 libnl: update to 3.8.0
Changes:
6b2533c0 libnl-3.8.0 release
1558bd62 build: replace old "NOTE" in configure output and add summary
f66383a4 build: avoid aclocal warning about missing "m4" directory
e4402a4c build: run `autoupdate` for AM_PROG_LIBTOOL
5761b6af build: add "-Wno-portability" to AC_INIT_AUTOMAKE()
661f10a1 license: fix/adjust license for "src/nl-cls-add.c"
c8fcb412 license: fix/adjust license for "src/nl-addr-{add,delete,list}.c"
e3e6fd6d tests: use thread-safe localtime_r() instead of localtime()
f520471c lib/xfrm: use thread-safe gmtime_r() instead of gmtime()
be5add72 tests: avoid srandom()/random() in favor of _nltst_rand_u32()
40578a62 lib: use getprotobyname_r(), getprotobynumber_r() if available
8ee8b05f lib: fix error handling in nl_str2ip_proto()
09f03f29 tests: check nl_str2ip_proto()
74bffbf6 route: fix documentation comment for nl_nh_group_info
59f8db0d clang-format: add "-l" alias for option in "tools/clang-format.sh"
935cc90a clang-format: ignore reformatting commit in ".git-blame-ignore-revs"
53da4712 clang-format: reformat files with new format
65c43bfe clang-format: update ".clang-format" from linux kernel
4c39a2ce include: use <linux/$file> instead of <linux-private/linux/$file>
a1e9fb3d include/linux: add all linux headers that we use
d37ffe15 include/linux: update all linux headers
1af767a8 include: add missing "extern "C"" specifier to public headers
e0a5d12b all: drop "extern "C"" from internal code
d9a1e0ce build: add "check-local-build-headers" test target to build public headers
02b87012 build: add a "check-local" build target
f9413915 include: fix headers "include/netlink/route/{netconf.h,route/qdisc/red.h}" to be self-contained
680df173 idiag: "fix" license for "idiag-socket-details" tool
2f210d9a github: test build on alpine:latest for musl
dcc4c0a5 Revert "gitignore: ignore patch files"
39106309 github: add test for linking with mold and fail on unknown versions
f475c3b2 route/nh: drop not implemented "nh" API from headers
4c681e77 build: fix exporting symbol rtnl_link_info_ops_get
260c9575 include: don't explicitly include headers from "nl-default.h"
98c1e696 tests: cleanup include of netlink headers
42bec462 build: cleanup default include list in Makefile.am
4c1a119a include: include private linux headers with explicit path
ca063725 python: add make target for python build
25c90193 python: drop unused "python/netlink/fixes.h"
3f3da7fd gitignore: ignore python build artifacts
61ef5609 gitignore: ignore generated doc files
298c5dc6 include: drop "netlink-private/netlink.h" and move declarations
862eed54 all: cleanup includes and use "nm-default.h"
2b3cd741 include: add "nl-default.h" header
8952ce6f build: move "lib/defs.h" to "include/config.h"
1010776d include: split and drop "netlink-private/types.h"
d1d57846 include: rename "nl-shared-core" to "nl-priv-dynamic-core"
fc91c4f8 include: rename "nl-hidden-route" to "nl-priv-dynamic-route"
9bb6f770 include: rename "nl-intern-route" to "nl-priv-static-route"
b5195db9 genl: rename private header "nl-priv-genl.h" to "nl-genl.h"
0eacf658 include: make "netlink/route/link/{inet,inet6}.h" self-contained
ad014ad1 route/tc: avoid unalinged access in rtnl_tc_msg_parse()
05bd6366 add support for TC action statistics
776fc5a6 lib: move "include/netlink-private/object-api" to include/nl-shared-core
fad34560 lib: move "include/netlink-private/cache-api" to include/nl-shared-core
ed2be537 route: move "include/netlink-private/route/link/sriov.h" to lib/route/link-sriov.h
97f61eda lib: move "include/netlink-private/socket.h" to lib/nl-core.h
96e1cc5b route: move "include/netlink-private/route/nexthop-encap.h" to lib/route
391e03d3 route: merge "include/netlink-private/tc.h" to lib/route/tc-api.h
7fc4f5b3 route: move rtnl_tc_build_rate_table() to "tc-api.h"
cf41e14d route: move "include/netlink-private/route/tc-api.h" to lib/route
db810cfb route: move hidden symbols from "include/netlink-private/route/tc-api.h"
ff08e618 build: don't add lib/route to include directory for all libs
eb8da16d include: move "include/netlink-private/route/link/api.h" to lib/route
8b2074aa include: move "include/netlink-private/route/utils.h" to nl-intern-route
fd470c06 include: move "include/netlink-private/route/mpls.h" to "lib/mpls.h"
78056ad2 genl: add comment about wrongly exported symbol genl_resolve_id()
befc4ab4 include: move "include/netlink-private/genl.h" to "lib/genl/nl-priv-genl.h"
f6c26127 nl-aux: add "include/nl-aux-{core,route}" headers
2da8481b base: move "netlink-private/utils.h" to "base/nl-base-utils.h"
d3e9b513 include/utils: move nl-auto base defines to "utils.h"
543b9f8f clang-format: reformat "include/netlink-private/nl-auto.h"
aa565460 route: cleanup ATTR_DIFF() macros
beba5a18 cli: add nl-nh-list utility
780d06ae route: add nh type
1b6433d9 neigh: add support of NHID attribute
e0140c5f include: import kernel headers "linux/{neighbour,nexthop,rtnetlink}.h"
eef06744 utils: add static-assert for signedness of arguments of _NL_CMP_DIRECT() macro
679c4c51 cli: use <netlink-private/utils.h> in cli and _nl_{init,exit}
a9c5de52 lib: use _nl_{init,exit} instead of __{init,exit}
102f9bd2 include/private: add _nl_init/_nl_exit macros
6782678e include/private: drop unused __deprecated macro
a0535a58 all: use "_nl_packed" macro instead of "__attribute__((packed))"
8c9f98cf all: rework ATTR_DIFF() macros to not generate attribute names
ca34ad52 lib: handle negative and zero size in nla_memcpy()
859b89dc include: drop now unused min()/max()/min_t()/max_t() macros
2e0ae977 all: use _NL_{MIN,MAX}() macros
57c451fa utils: add various helpers to "include/netlink-private/utils.h"
a9a9dcea style: format "include/netlink-private/utils.h" with clang-format
590e8a61 tools: improve failure message with "tools/clang-format.sh -n"
06dc5ae0 github: fix format checking with clang-format
7738f239 route/trivial: sort entries in "libnl-route-3.sym" asciibetically
fc805c56 route/bond: Add support for link_info for bond
6af26981 lib: accept NULL argument in nla_nest_cancel() for robustness
e9662091 macsec: Drop offload capability validation check
35a68109 github: update flake8 linter to not explicitly select checks
9a266405 python: add ".flake8" file for configuring "flake8"
e6b934a5 python: fix flake8 warnings E712
2cea738b python: fix flake8 warnings E711
d561096c python: fix flake8 warnings E302
29b06d0f python: fix flake8 warnings E741
4dc1f498 python: fix flake8 warnings F841
f4875c69 python: fix flake8 warnings W605
9a3d91df python: fix flake8 warnings F401
6baf2339 clang-format: add "tools/clang-format-container.sh" script
ee2876e3 github: add test for checking clang-format style
45c7aae3 clang-format: add "tools/clang-format.sh" script
02e0fd3f github: check python-black code formatting in github actions
2dd53895 build: add ".git-blame-ignore-revs" file for "blame.ignoreRevsFile" git config
3c753e3c python: reformat all Python files with python-black
298ee58e python add "pyproject.toml" for configuring black
a0e4b7f9 github: skip Python flake8 test with clang build
c4240c0b github: run "Build Release" test also with clang
143cee1d bridge: fix bridge info parsing
96bbe55c test-cache-mngr: Flush output after object dumps
cf5dcbcd test-cache-mngr: Add option to print timestamps
bd570952 test-cache-mngr: Add an option to iterate over all supported address families
bf80da90 test-cache-mngr: Add dump interval options
80febeea test-cache-mngr: Add an option to control which oo_dump function is used
6519a917 route/link: prevent segfault in af_request_type()
a68260f8 github: fix installing python dependencies via pip
39c04bc7 build: drop redundant "autogen.sh" call from "tools/build_release.sh"
d411b88d build: change proper working directory in "doc/autogen.sh"
2fa73ce0 build: ensure "autogen.sh" scripts fail on error
fc786296 gitignore: ignore "*~" files
4c4e614b docs: rtnl_link_put() 'releases' instead of 'returns'
336b15dc include/linux: update copy of kernel header "linux/ipv6.h"
e2cacc26 route/link: improve handling of IFLA_INET6_CONF
ec8c493c route/link: remove rtnl_link_inet6_set_conf() API
e790f8ad route/link: various fixes for rtnl_link_inet6_get_conf() API
d83c6d54 route/link: add accessor API for IPv6 DEVCONF
9167504d bridge: drop unnecessary goto in bridge_info_parse()
984d6e93 bridge: don't normalize the u8 argument in rtnl_link_bridge_set_vlan_filtering() to boolean
3662a5da bridge: expose rtnl_link_bridge_get_vlan_protocol() in host byte order
5a1ef219 bridge: fix parsing vlan-protocol in bridge_info_parse()
ad1c2927 bridge: minor cleanups in "bridge_info.c"
1c74725a bridge: use SPDX license identifiers in bridge_info files
26ca549d bridge: reformat bridge_info file with clang-format
08dc5d9c bridge: extend libnl with options needed for VLAN aware forwarding
7391a38e bridge: Add support for link_info of a bridge
1f1e8385 route/vlan: drop unnecessary "else" in vlan_put_attrs()
2bc30e57 route/vlan: fix error handling in 'lib/route/link/vlan.c'
8273d6ce build: add comments to linker version scripts about the version tags
6ac7a812 doc: fix typo
07d274ab doc: fix typo
0461a425 attr: reject zero length addresses
8d40d9eb route: construct all-zero addresses for default route destination
25d42a4f addr: allow constructing all-zero addresses
0c0aee82 addr: create an all-zero addresses when parsing "any" or "default"

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 09:50:38 +02:00
Nick Hainke
22174e7c2a libmd: update to 1.1.0
Changes:
16d68ab Release libmd 1.1.0
054bca1 build: Terminate lists in variables with «# EOL»
84d269e test: Add cases for SHA224 and SHA512-256
a677e68 test: Add a new test_eq() helper function
4c5931f Sync SHA2 changes from OpenBSD
9934d94 Sync SHA1 changes from OpenBSD
457e30a Sync RMD160 changes from OpenBSD
b2e54bc Sync MD5 changes from OpenBSD
ee56a52 Sync MD4 changes from OpenBSD
b9496ac Sync MD2 changes from NetBSD
09d5824 Remove unused <assert.h>
08b2c5d build: Rename libmd_alias() to libmd_strong_alias()
ed69599 On Darwin use assembler to support symbol aliases
b74b777 build: Do not use strong aliases on macOS
94838ec build: Require automake 1.11
39cbc7b build: Fix configure.ac indentation
4620a04 build: Switch to debian:latest Docker image
e408786 build: Fix version script linker support detection
0ef1e4d doc: Move mailing list reference to the end
a3f1671 man: Add new libmd(7) man page

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 09:50:25 +02:00
Nick Hainke
bf4092cf61 libjson-c: update to 0.17
Release Notes:
ad8b8afa7d/ChangeLog (L2)

Refresh patch:
- 001-dont-build-docs.patch

Delete upstreamed patch:
- 010-fix-build-with-clang-15.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 09:50:06 +02:00
Nick Hainke
63f5b5ed3f tools/zlib: update to 1.3
Changes in 1.3 (18 Aug 2023)
- Remove K&R function definitions and zlib2ansi
- Fix bug in deflateBound() for level 0 and memLevel 9
- Fix bug when gzungetc() is used immediately after gzopen()
- Fix bug when using gzflush() with a very small buffer
- Fix crash when gzsetparams() attempted for transparent write
- Fix test/example.c to work with FORCE_STORED
- Rewrite of zran in examples (see zran.c version history)
- Fix minizip to allow it to open an empty zip file
- Fix reading disk number start on zip64 files in minizip
- Fix logic error in minizip argument processing
- Add minizip testing to Makefile
- Read multiple bytes instead of byte-by-byte in minizip unzip.c
- Add memory sanitizer to configure (--memory)
- Various portability improvements
- Various documentation improvements
- Various spelling and typo corrections

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 09:49:49 +02:00
John Audia
096bb8ed82 kernel: bump 5.15 to 5.15.135
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.135

All patches automatically rebased.

Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-10-12 08:26:06 +02:00
Nick Hainke
cdcabbd490 tools/pkgconf: update to 2.0.3
News:
- 752a9825dc/NEWS (L13)
- 752a9825dc/NEWS (L4)

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 00:23:16 +02:00
Nick Hainke
c0f1980adf tools/libdeflate: update to 1.19
Release Notes:
https://github.com/ebiggers/libdeflate/blob/master/NEWS.md#version-119

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 00:23:03 +02:00
Nick Hainke
01ae733e06 tools/gmp: update to 6.3
Release Notes:
https://gmplib.org/gmp6.3

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 00:22:36 +02:00
Nick Hainke
6d9af0ee5a tools/ccache: update to 4.8.3
Release Notes:
https://ccache.dev/releasenotes.html#_ccache_4_8_3

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 00:22:09 +02:00
Nick Hainke
9947fe74e3 tools/cmake: update to 3.27.5
Release Notes:
- https://www.kitware.com/cmake-3-27-5-available-for-download/
- https://www.kitware.com/cmake-3-27-6-available-for-download/
- https://www.kitware.com/cmake-3-27-7-available-for-download/

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-12 00:21:46 +02:00
Nick Hainke
67e465b32e util-linux: update to 2.39.2
Changelog:
4d3079ad4 build-sys: release++ (v2.39.2)
9dc7d9808 docs: update v2.39.2-ReleaseNotes
4ffb7ac7c docs: update AUTHORS file
20781132f po-man: merge changes
76228ce1c po: merge changes
86c851c27 po-man: update sr.po (from translationproject.org)
c695dce97 po: update sr.po (from translationproject.org)
b168eef36 po: update ja.po (from translationproject.org)
83557da34 po: update hr.po (from translationproject.org)
5495eeb64 po: update es.po (from translationproject.org)
7de55c1ea setarch: add PER_LINUX_FDPIC fallback
b101de3d0 libblkid: fix topology chain types mismatch
131098cc8 uuidd: improve man page for -cont-clock
112d2245e zramctl: add hint about supported algorithms
f5b01cd95 meson: check for HAVE_STRUCT_STATX_STX_MNT_ID
a1f803340 include: define pidfd syscalls if needed
032c502d5 wall: do not error for ttys that do not exist
140404e1f column: fix -l
1632bd6d4 lscpu: Even more Arm part numbers (early 2023)
fc0a64480 chrt: (man) add note about --sched-period lower limit
073d02941 meson: add check for struct statx
9d54f7c99 meson: add check for linux/mount.h
d14d39cbd libmount: improve EPERM interpretation
ce266c9e1 libmount: ifdef statx() call
a64cec15a libmount: check for struct statx
396798d6b libmount: check for linux/mount.h
03435a7c6 libmount: (utils) fix statx fallback
993581379 libmount: cleanup --fake mode
501227232 libmount: (python): work around python 3.12 bug
8950e9852 build-sys: add AX_COMPARE_VERSION
1e05167df libmount: update documentation for MNT_ERR_APPLYFLAGS
e7c34902f libmount: fix typo
e5858dbb6 libmount: use some MS_* flags as superblock flags
f1875239b libmount: use mount(2) for remount on Linux < 5.14
58cb00c63 github: check apt-cache in more robust way
0a9bf6166 libmount: handle failure to apply flags as part of a mount operation
e98ef85a8 build-sys: release++ (v2.39.1)
12169133e docs: update v2.39.1-ReleaseNotes
508e25110 docs: update AUTHORS file
6b865e1b0 po-man: merge changes
aa4f94cb5 po: merge changes
cad75b635 po-man: add ro.po (from translationproject.org)
8acfe93b7 po-man: add ko.po (from translationproject.org)
5f31e774c po-man: update uk.po (from translationproject.org)
29626b095 po: update hr.po (from translationproject.org)
90835e74a cal: fix long option name for -c
7826c3ebe cal: fix error message for bad -c argument
07e6b9a12 lib/strutils: fix typo
cc99bfd06 build-sys: don't call pkg-config --static if unnecessary
3b59942da logger: initialize socket credentials contol union
4746cf936 unshare: fix error message for unexpected time offsets
a34e6aced losetup: deduplicate find_unused() logic
423d9efab lib/loopdev: consistently return error values from loopcxt_find_unused()
8feec98a8 lib/loopdev: document function return values
36ce0c250 tests: (run.sh) detect builddir from working directory
1943ad6cd hardlink: (man) add missing comma
1a4522541 libmount: fix sync options between context and fs structs
3aba3fb95 tests: (lsfd) add a case for verifying ENDPOINTS column output in JSON mode
c289c152a lsfd: use ARRAY_STRING for ENDPOINTS column in JSON output mode
665e28c30 lsfd: (filter) weakly support ARRAY_STRING and ARRAY_NUMBER json types
d9fca2b62 sfdisk: add hint about duplicate UUIDs when use dump
d84ee5a46 lib: remove pager.c from libcommon
c50da4b07 lib/ include/: cleanup license headers
d5adeed7a lib/color-names: fix license header
868f7f10c tests: fix update special mount test output
2278e2f91 tests: backport special mount script
d8a4e680f libmount: always ignore user=<name>
22d0a6557 meson: check for _NL_TIME_WEEK_1STDAY in langinfo.h
205e88e51 meson: conditionalize waitpid
aebfa97d5 meson: add conditionalization for test progs
bbe24d5b1 meson: implement HAVE_PTY
bc58e3b35 meson: install write setgid
f5a411883 meson: install wall setgid
64e67f720 meson: install umount setuid
4c3c05006 meson: install mount setuid
58c107277 meson: install newgrp setuid
8549017af meson: install su setuid
fa818dc8d meson: install chsh setuid
1e9fc724e meson: install chfn setuid
53ff0fcda libmount: introduce LIBMOUNT_FORCE_MOUNT2={always,never,auto}
61307a950 libmount: (optlist) correctly detect ro status
8c85b0805 tests: backport mount_setattr test
5004732d8 libblkid: jfs - avoid undefined shift
c082e6182 build-sys: fix typo in waitpid check
b04446bfd Update fsck.8.adoc
9429cc72b dmesg: make kmsg read() buffer big enough for kernel
198fd3fb2 Fix Blizzard-M2-Max
20c04a509 Add recent Apple ARM cores
9d4d768f2 libmount: don't call hooks after mount.<type> helper
98ed3edf8 meson: install symlink for vigr man page
f25cc3372 meson: include bash-completion for write
760c01641 meson: include bash-completion for newgrp
ddf48064f libmount: cleanup enosys returns from mount hoop
230459358 libmount: don't call mount.<type> helper with usernames
6fa034d0a libmount: fix options prepend/insert and merging
f8c9ef62e libmount: check for availability of mount_setattr
9422991c9 libmount: don't pass option "defaults" to helper
2806759b5 build-sys: add --disable-waitpid
01e3ec515 mesg.1 cleanups/updates
00a19fb8c libblkid: (bcache) also calculate checksum over journal buckets
158639a2a libblkid: (bcache) extend superblock definition
43926e0b0 ci: prevent prompts during installation
01bb5d12d tools: (asciidoctor) explicitly require extensions module
da22c179c build-sys: only pass --failure-level if supported
1bfc285fa lsfd: (tests) fix typo
66fac3e71 blkzone: don't take address of struct blk_zone
d2e3ac959 enosys: add support for loongarch
a369feacc meson: require 0.57
f084562c3 enosys: split audit arch detection into dedicated header
88f76e37a enosys: add support for sparc
f65c49002 waitpid: only build when pidfd_open is available
ddf9b36ea libsmartcols: (samples): fix format truncation warning
0d0766fbe test_uuidd: make pthread_t formatting more robust
873a896e0 mkfs.minix: handle 64bit time on 32bit system
69d8400e4 enosys: add support for MIPS, PowerPC and ARC
0ee8ac065 test_enosys: fix build on old kernels

Remove upstreamed patches:
- 0001-test_enosys-add-support-for-mips.patch
- 200-meson-no-po.patch

Backport patch:
- 001-meson-properly-handle-gettext-non-existence.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-10-11 08:08:36 +02:00
Hauke Mehrtens
66f6c20e45 lantiq: Fix an sleeping function called from invalid context
The ifx_pcie_bus_enum_hack() function is called in
ifx_pcie_read_config() while holding the ifx_pcie_lock spinlock. The
ifx_pcie_bus_enum_hack() function calls pci_get_slot() which could
sleep. Add a new function for pci_get_slot() which does not use a
semaphore, the mutex should be sufficient. This fixes the sleep in
atomic context which could cause a hang of the system.

This fixes the following warning seen with
CONFIG_KERNEL_DEBUG_ATOMIC_SLEEP=y.

[   12.264300] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[   12.272226] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1487
[   12.280684] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/u4:0
[   12.288781] CPU: 0 PID: 9 Comm: kworker/u4:0 Not tainted 5.15.134 #0
[   12.295135] Workqueue: events_unbound deferred_probe_work_func
[   12.300964] Stack : 80e70000 8008ac80 00000000 00000004 807c776c 8145b9ec 81424c00 800520ec
[   12.309316]         808a0000 8145ba2b 8145b844 8145b838 80414178 00000001 8145b9f8 81439ea0
[   12.317674]         00000000 00000000 807c776c 8145b838 ffffefff 00000000 00000000 ffffffea
[   12.326030]         00000081 8145b844 00000081 808a6f50 807c776c 00000000 00000000 80910000
[   12.334391]         00111bef 00000000 00000001 00000000 00000018 00000030 00000000 80e40000
[   12.342741]         ...
[   12.345177] Call Trace:
[   12.347613] [<8000c1d0>] show_stack+0x28/0xf0
[   12.351974] [<8038ba1c>] dump_stack_lvl+0x60/0x80
[   12.356667] [<8005eefc>] ___might_sleep+0x124/0x138
[   12.361547] [<806daf30>] down_read+0x24/0x88
[   12.365807] [<803cdd20>] pci_get_slot+0x2c/0xc0
[   12.370333] [<806d56ac>] ifx_pcie_read_config+0x164/0x330
[   12.375735] [<803be610>] pci_bus_read_config_dword+0x6c/0xd0
[   12.381399] [<803c20cc>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1a8
[   12.387915] [<803c27ec>] pci_scan_single_device+0x88/0x154
[   12.393404] [<803c2928>] pci_scan_slot+0x70/0x134
[   12.398099] [<803c3bf0>] pci_scan_child_bus_extend+0x5c/0x320
[   12.403849] [<803c4178>] pci_scan_root_bus_bridge+0xd0/0xec
[   12.409414] [<806d45a8>] pcibios_scanbus+0xe4/0x21c
[   12.414293] [<806d4908>] register_pci_controller+0xb8/0x11c
[   12.419858] [<806d5f9c>] ifx_pcie_bios_probe+0x724/0x940
[   12.425174] [<80417574>] platform_probe+0x38/0x90
[   12.429868] [<80414d68>] really_probe.part.0+0xac/0x354
[   12.435103] [<80415298>] driver_probe_device+0x4c/0x154
[   12.440313] [<80415904>] __device_attach_driver+0xd0/0x15c
[   12.445802] [<804129d8>] bus_for_each_drv+0x70/0xb0
[   12.450676] [<80415610>] __device_attach+0xdc/0x194
[   12.455545] [<80413ca8>] bus_probe_device+0x9c/0xb8
[   12.460419] [<8041420c>] deferred_probe_work_func+0x94/0xd4
[   12.465995] [<8004fcb4>] process_one_work+0x27c/0x4c8
[   12.471044] [<80050710>] worker_thread+0x34c/0x5f8
[   12.475825] [<800587a8>] kthread+0x168/0x18c
[   12.480090] [<80006ef8>] ret_from_kernel_thread+0x14/0x1c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-10-10 00:22:25 +02:00
Hauke Mehrtens
cac723e8b8 bsdiff: Add patches for CVEs
Add two patches from Debian fixing CVEs in the bsdiff application.
CVE-2014-9862: Heap vulnerability in bspatch
CVE-2020-14315: Memory Corruption Vulnerability in bspatch

Copied the patches from this location:
https://salsa.debian.org/debian/bsdiff/-/blob/debian/latest/debian/patches/20-CVE-2014-9862.patch
https://salsa.debian.org/debian/bsdiff/-/blob/debian/latest/debian/patches/33-CVE-2020-14315.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-10-09 23:42:37 +02:00
Kevin Jilissen
f4ee08677c realtek: add support for HPE 1920-8g-poe+ (65W)
Hardware information:
---------------------

- RTL8380 SoC
- 8 Gigabit RJ45 PoE ports (built-in RTL8218B)
- 2 SFP ports (built-in SerDes)
- RJ45 RS232 port on front panel
- 32 MiB NOR Flash
- 128 MiB DDR3 DRAM
- PT7A7514 watchdog
- PoE chip
- Fanless

Known issues:
---------------------
- PoE LEDs are uncontrolled.

(Manual taken from f2f09bc)
Booting initramfs image:
------------------------

- Prepare a FTP or TFTP server serving the OpenWrt initramfs image and
  connect the server to a switch port.

- Connect to the console port of the device and enter the extended
  boot menu by typing Ctrl+B when prompted.

- Choose the menu option "<3> Enter Ethernet SubMenu".

- Set network parameters via the option "<5> Modify Ethernet Parameter".
  Enter the FTP/TFTP filename as "Load File Name" ("Target File Name"
  can be left blank, it is not required for booting from RAM). Note that
  the configuration is saved on flash, so it only needs to be done once.

- Select "<1> Download Application Program To SDRAM And Run".

Initial installation:
---------------------

- Boot an initramfs image as described above, then use sysupgrade to
  install OpenWrt permanently. After initial installation, the
  bootloader needs to be configured to load the correct image file

- Enter the extended boot menu again and choose "<4> File Control",
  then select "<2> Set Application File type".

- Enter the number of the file "openwrt-kernel.bin" (should be 1), and
  use the option "<1> +Main" to select it as boot image.

- Choose "<0> Exit To Main Menu" and then "<1> Boot System".

NOTE: The bootloader on these devices can only boot from the VFS
filesystem which normally spans most of the flash. With OpenWrt, only
the first part of the firmware partition contains a valid filesystem,
the rest is used for rootfs. As the bootloader does not know about this,
you must not do any file operations in the bootloader, as this may
corrupt the OpenWrt installation (selecting the boot image is an
exception, as it only stores a flag in the bootloader data, but doesn't
write to the filesystem).

Example PoE config file (/etc/config/poe):
---------------------
config global
        option budget   '65'

config port
        option enable   '1'
        option id       '1'
        option name     'lan8'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '2'
        option name     'lan7'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '3'
        option name     'lan6'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '4'
        option name     'lan5'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '5'
        option name     'lan4'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '6'
        option name     'lan3'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '7'
        option name     'lan2'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '8'
        option name     'lan1'
        option poe_plus '1'
        option priority '2'

Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
2023-10-09 19:29:45 +02:00
Kevin Jilissen
987c96e889 realtek: rename hpe,1920-8g-poe to match hardware
There are two hardware models of the HPE 1920-8g-poe switch. The version
currently in the repository is the model with a PoE budget of 180W. In
preparation of the addition of the 65W model, the existing model is
renamed to clarify the hardware version it targets.

As suggested by Pawel, the 'SUPPORTED_DEVICES' includes the old target
name to enable an upgrade path of builds with the old name.

Suggested-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
2023-10-09 19:27:50 +02:00
David Bauer
666c80d33f ath79: add WWAN serial driver for GL.iNET GL-XE300
The driver for the cellular modems serial interface was missing from the
default device packages.

The driver is required to interact with the modem using AT commands.
Other devices with a 4G modem also ship with this package, thus let's
add it to the default packages for the board.

Signed-off-by: David Bauer <mail@david-bauer.net>
2023-10-09 12:47:41 +02:00
Christian Marangi
94ed8f73e1
ipq806x: fix broken onhub dtsi
Fix broken onhub dtsi. The gmac node have a redundant phy-handle that
doesn't point to the swconfig phy node as they got dropped in the DSA
conversion. Drop these extra binding to restore correct compilation of
this subtarget.

Fixes: 337e36e0ef ("ipq806x: convert each device to DSA implementation")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-10-09 11:17:25 +02:00
Shiji Yang
9ac891f8c4
ramips: convert MT7915 EEPROM to NVMEM format
This patch converts MT7915 WiFi calibration data to NVMEM format. The
EEPROM size is 0xe00.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00