openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 06:08:08 +00:00

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.

Go to file

Kevin Jilissen f4ee08677c realtek: add support for HPE 1920-8g-poe+ (65W) Hardware information: --------------------- - RTL8380 SoC - 8 Gigabit RJ45 PoE ports (built-in RTL8218B) - 2 SFP ports (built-in SerDes) - RJ45 RS232 port on front panel - 32 MiB NOR Flash - 128 MiB DDR3 DRAM - PT7A7514 watchdog - PoE chip - Fanless Known issues: --------------------- - PoE LEDs are uncontrolled. (Manual taken from `f2f09bc`) Booting initramfs image: ------------------------ - Prepare a FTP or TFTP server serving the OpenWrt initramfs image and connect the server to a switch port. - Connect to the console port of the device and enter the extended boot menu by typing Ctrl+B when prompted. - Choose the menu option "<3> Enter Ethernet SubMenu". - Set network parameters via the option "<5> Modify Ethernet Parameter". Enter the FTP/TFTP filename as "Load File Name" ("Target File Name" can be left blank, it is not required for booting from RAM). Note that the configuration is saved on flash, so it only needs to be done once. - Select "<1> Download Application Program To SDRAM And Run". Initial installation: --------------------- - Boot an initramfs image as described above, then use sysupgrade to install OpenWrt permanently. After initial installation, the bootloader needs to be configured to load the correct image file - Enter the extended boot menu again and choose "<4> File Control", then select "<2> Set Application File type". - Enter the number of the file "openwrt-kernel.bin" (should be 1), and use the option "<1> +Main" to select it as boot image. - Choose "<0> Exit To Main Menu" and then "<1> Boot System". NOTE: The bootloader on these devices can only boot from the VFS filesystem which normally spans most of the flash. With OpenWrt, only the first part of the firmware partition contains a valid filesystem, the rest is used for rootfs. As the bootloader does not know about this, you must not do any file operations in the bootloader, as this may corrupt the OpenWrt installation (selecting the boot image is an exception, as it only stores a flag in the bootloader data, but doesn't write to the filesystem). Example PoE config file (/etc/config/poe): --------------------- config global option budget '65' config port option enable '1' option id '1' option name 'lan8' option poe_plus '1' option priority '2' config port option enable '1' option id '2' option name 'lan7' option poe_plus '1' option priority '2' config port option enable '1' option id '3' option name 'lan6' option poe_plus '1' option priority '2' config port option enable '1' option id '4' option name 'lan5' option poe_plus '1' option priority '2' config port option enable '1' option id '5' option name 'lan4' option poe_plus '1' option priority '2' config port option enable '1' option id '6' option name 'lan3' option poe_plus '1' option priority '2' config port option enable '1' option id '7' option name 'lan2' option poe_plus '1' option priority '2' config port option enable '1' option id '8' option name 'lan1' option poe_plus '1' option priority '2' Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>		2023-10-09 19:29:45 +02:00
.github	CI: push-containers: refresh containers also on modify cmake options	2023-10-04 13:28:58 +02:00
config	kernel: default ARM_PMU on for armsr/armv8	2023-08-15 15:55:00 +02:00
include	kernel: bump 6.1 to 6.1.56	2023-10-08 14:01:47 +02:00
LICENSES	LICENSES: include all used licenses in LICENSES directory	2021-02-14 19:21:38 +01:00
package	linux-atm: use target specific kernel headers	2023-10-05 10:31:39 +02:00
scripts	Delete arm-magic script	2023-10-04 15:11:16 +02:00
target	realtek: add support for HPE 1920-8g-poe+ (65W)	2023-10-09 19:29:45 +02:00
toolchain	toolchain: glibc: Update glibc 2.37 to recent HEAD	2023-10-08 14:05:12 +02:00
tools	ccache: add missing \	2023-09-24 12:49:50 +02:00
.gitattributes
.gitignore	.gitignore: ignore link if target is included from feed	2023-07-26 17:45:11 +02:00
BSDmakefile
Config.in	build: scripts/config - update to kconfig-v5.14	2022-02-19 13:10:01 +01:00
COPYING	COPYING: add COPYING file to specify project licenses	2021-02-14 19:21:38 +01:00
feeds.conf.default	Revert "feeds: use git-src-full to allow Git versioning"	2023-05-23 14:38:55 +02:00
Makefile	treewide: add ORIG_PATH variable	2023-06-05 08:31:47 +02:00
README.md	build: drop support for python 3.6	2023-05-22 13:23:35 +02:00
rules.mk	prereq-build: increase GCC requirement to 8	2023-08-14 20:18:42 +02:00

README.md

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

OpenWrt Firmware Selector

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

OpenWrt Wiki Download

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default
Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/
Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.
Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

LuCI Web Interface: Modern and modular interface to control the device via a web browser.
OpenWrt Packages: Community repository of ported packages.
OpenWrt Routing: Packages specifically focused on (mesh) routing.
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

Forum: For usage, projects, discussions and hardware advise.
Support Chat: Channel #openwrt on oftc.net.

Developer Community

Bug Reports: Report bugs in OpenWrt
Dev Mailing List: Send patches
Dev Chat: Channel #openwrt-devel on oftc.net.

License

OpenWrt is licensed under GPL-2.0