openwrt

ExternalVendorCode/openwrt

Fork 0

mirror of https://github.com/openwrt/openwrt.git synced 2025-01-10 15:03:07 +00:00

Commit Graph

Author	SHA1	Message	Date
Rosen Penev	eabfe691ce	bmips: dsl-2750b-b1: fix calibration size AR9287 uses 3d8, not 440 like newer chips. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/17278 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>	2024-12-23 23:46:42 +01:00
Samuele Longhi	ba9c269e1e	bmips: bcm6328: add support for D-Link DSL-2750B rev B1 The D-Link DSL-2750B rev B1 (AW4339U) is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. This ports the device from old target bcm63xx/generic to bmips/bcm6328. The hardware is the same of D-Link DSL-2740B rev F1 and DSL-2741B rev F1, plus a usb2 port. Hardware: - SoC: Broadcom BCM63281 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (Nanya NT5TU32M16DG) - Flash: 8 MB NOR (Macronix MX25L6406ENI-12G) - Ethernet LAN: 4x 100Mbit (Broadcom BCM63281) - Wifi 2.4 GHz: 802.11bgn (Atheros AR9287) - USB: 1x 2.0 - Buttons: 3x - LEDs: 10x - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Samuele Longhi <agave@dracaena.it>	2024-08-20 16:19:11 +02:00

Author

SHA1

Message

Date

Rosen Penev

eabfe691ce

bmips: dsl-2750b-b1: fix calibration size

AR9287 uses 3d8, not 440 like newer chips.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17278
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

2024-12-23 23:46:42 +01:00

Samuele Longhi

ba9c269e1e

bmips: bcm6328: add support for D-Link DSL-2750B rev B1

The D-Link DSL-2750B rev B1 (AW4339U) is a wifi fast ethernet router, 2.4 GHz single band
with two external antennas.

This ports the device from old target bcm63xx/generic to bmips/bcm6328.
The hardware is the same of D-Link DSL-2740B rev F1 and DSL-2741B rev F1, plus a usb2 port.

Hardware:
 - SoC: Broadcom BCM63281
 - CPU: single core BMIPS4350 @ 320Mhz
 - RAM: 64 MB (Nanya NT5TU32M16DG)
 - Flash: 8 MB NOR (Macronix MX25L6406ENI-12G)
 - Ethernet LAN: 4x 100Mbit (Broadcom BCM63281)
 - Wifi 2.4 GHz: 802.11bgn (Atheros AR9287)
 - USB: 1x 2.0
 - Buttons: 3x
 - LEDs: 10x
 - UART: yes

Installation via CFE web UI:
  1. Power off the router.
  2. Press reset button near the power switch.
  3. Keep it pressed while powering up during ~20+ seconds.
  4. Browse to http://192.168.1.1 and upload the firmware.
  5. Wait a few minutes for it to finish.

Signed-off-by: Samuele Longhi <agave@dracaena.it>

2024-08-20 16:19:11 +02:00

2 Commits