Commit Graph

41641 Commits

Author SHA1 Message Date
Nick Hainke
d4a4f06589 iwinfo: update to version 2018-07-24
Update to new iwinfo version.
Adds support for channel survey.
Adds ubus support.
Etc.

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 296ae7ab89)
2018-07-30 11:21:25 +02:00
John Crispin
4a39d8cfd0 iwinfo: bump to latest git HEAD
e59f925 hardware: add device ids for QCA9984, 88W8887 and 88W8964 radios
2a82f87 nl80211: back out early when receiving FAIL-BUSY reply
77c32f0 nl80211: fix code calculating average signal and rate

Signed-off-by: John Crispin <john@phrozen.org>
(cherry picked from commit 20b76c0a5b)
2018-07-30 11:21:24 +02:00
Thibaut VARÈNE
cb73dd21a3 ar71xx: rbspi: fix RB wAP AC gpio conflict and LED
e15c63a375 introduced code that was trying
to register GPIO 1 as both an LED and a button. The OEM source makes it
clear that LED1 is not wired to the SoC GPIOs. GPIO 1 is the reset button.

Furthermore the (green) power led default state should also be defined,
(matching OEM source), and it should be used by diag.sh since it's
currently the only software-controllable LED.

This patch fixes these issues and renames the corresponding #defines for
clarity

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(cherry picked from commit e99f760235)
2018-07-30 11:12:41 +02:00
Thibaut VARÈNE
bb06f6d3ba ar71xx: add missing diag LED support for RB wAP 2nD
3b15eb06c3 did not include diag.sh
edit

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(cherry picked from commit 5c2419b6f8)
2018-07-30 11:12:41 +02:00
Jo-Philipp Wich
c8e8ff1c9f brcm47xx: rework model detection
On brcm47xx boards, the model ID is the combination of the "boardtype" nvram
variable and an optional supplemental "boardnum" variable while the human
readable model name is usually exposed in the "machine" field of the
/proc/cpuinfo file.

Move the extraction of the board nvram variables and model name string into
the 01_sysinfo file and rework the 01_detect board configuration script to
solely use the prepared sysinfo values without performing own detection
logic.

As a consequence, we can drop the ucidef_set_board_id() and
ucidef_set_model_name() invocations in favor to the generic behaviour
which copies the /tmp/sysinfo/{board_name,model} values into the board.json
"id" and "name" fields respectively.

Since "01_detect" only contains network configuration logic after this
change, move it to "01_network" and rename the contained "detect_by_xxx"
functions to "configure_by_xxx" instead, to avoid potential confusion.

Fixes FS#1576
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

(cherry picked from commit d7d10f2c1e)
2018-07-30 11:11:21 +02:00
Rafał Miłecki
ca0c649a38 bcm53xx: revert SPI controller commit breaking flash reads
That upstream commit caused instability in flash reads. It was reported
but there isn't any proper fix as for now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 0417b08b06)
2018-07-29 11:10:03 +02:00
Kevin Darbyshire-Bryant
cf5a892430 dnsmasq: bump to dnsmasq v2.80test3
Refresh patches

Upstream commits since last bump:

3b6eb19 Log DNSSEC trust anchors at startup.
f3e5787 Trivial comment change.
c851c69 Log failure to confirm an address in DHCPv6.
a3bd7e7 Fix missing fatal errors when parsing some command-line/config options.
ab5ceaf Document the --help option in the french manual
1f2f69d Fix recurrent minor spelling mistake in french manual
f361b39 Fix some mistakes in french translation of the manual
eb1fe15 When replacing cache entries, preserve CNAMES which target them.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 1e93ef8498)
2018-07-28 11:23:58 +01:00
Hans Dedecker
bf1b0fad2b dnsmasq: don't use network functions at boottime (FS#1542)
As dnsmasq is started earlier than netifd usage of network.sh functions
at boottime will fail; therefore don't call at boottime the functions
which construct the dhcp pool/relay info.
As interface triggers are installed the dhcp pool/relay info will be
constructed when the interface gets reported as up by netifd.
At the same time also register interface triggers based on DHCP relay
config.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 2336b942b3)
2018-07-28 11:23:57 +01:00
Kevin Darbyshire-Bryant
cb9d5f0a7c dnsmasq: bump to latest patches on 2.80rc2
Refresh patches and backport upstream to current HEAD:

a997ca0 Fix sometimes missing DNSSEC RRs when DNSSEC validation not enabled.
51e4eee Fix address-dependent domains for IPv6.
05ff659 Fix stupid infinite loop introduced by preceding commit.
db0f488 Handle some corner cases in RA contructed interfaces with addresses changing interface.
7dcca6c Warn about the impact of cache-size on performance.
090856c Allow zone transfer in authoritative mode whenever auth-peer is specified.
cc5cc8f Sane error message when pcap file header is wrong.
c488b68 Handle standard and contructed dhcp-ranges on the same interface.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit fbf475403b)
2018-07-28 11:23:57 +01:00
Rafał Miłecki
962e86d9af brcm47xx: revert upstream commit breaking BCM4718A1
This fixes kernel hang when booting on BCM4718A1 (& probably BCM4717A1).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 4c1aa64b4d)
2018-07-27 16:00:31 +02:00
Rafał Miłecki
29aab93ea2 mac80211: backport brcmfmac fixes & debugging helpers from 4.18
The most important is probably regression fix in handling platform
NVRAM. That bug stopped hardware from being properly calibrated breaking
e.g. 5 GHz for Netgear R8000.

Other than that it triggers memory dumps when experiencing firmware
problems which is important for debugging purposes.

Fixes: 2811c97803 ("mac80211: backport brcmfmac firmware & clm_blob loading rework")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b26214adb5)
2018-07-27 08:14:13 +02:00
Jo-Philipp Wich
4e7f4777b0 odhcpd: update to latest git HEAD
Changes:

  81a281e dhcpv6-ia: fix border assignment size setting
  a2ffc59 dhcpv6-ia: fix status code for not on link IAs
  5b087a6 dhcpv6-ia: improve error checking in assign_pd()
  c9114a1 config: fix wrong assignment
  bb8470f dhcpv4: delay forced renew transaction start
  62a1b09 dhcpv4: fix DHCP address space logic
  d5726ff dhcpv4: improve logging when sending DHCP messages
  9484351 odhcpd: call handle_error when socket error can be retrieved
  c45e2eb dhcpv6: fix out of bounds write in handle_nested_message()
  c2ff5af dhcpv6-ia: log renew messages as well
  676eb38 router: fix possible segfault in send_router_advert()
  392701f odhcpd: fix passing possible negative parameter
  029123b treewide: switch to C-code style comments
  6b79748 router: improve error checking
  12e21bc netlink: fix incorrect sizeof argument
  d7aa414 dhcpv6: improve error checking in dhcpv6_setup_interface()
  373495a ubus: fix invalid ipv6-prefix json
  79d5e6f ndp: improve error checking
  d834ae3 dhcpv4: fix error checking in dhcpv4_setup_interface()
  f2aa383 dhcpv4: fix out of bound access in dhcpv4_put
  4591b36 dhcpv4: improve error checking in dhcpv4_setup_interface()
  4983ee5 odhcpd: fix strncpy bounds
  c0f6390 odhcpd: Check if open the ioctl socket failed
  345bba0 dhcpv4: improve error checking in handle_dhcpv4()
  44cce31 ubus: avoid dumping interface state with NULL message

Cherry picked and squashed from commits:

  b7ef10cbf0 odhcpd: update to latest git HEAD
  98a6bee09a odhcpd: update to latest git HEAD
  88c88823d5 odhcpd: update to latest git HEAD

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 18:55:32 +02:00
Jo-Philipp Wich
da0dd6adc2 ubus: update to latest git HEAD
40e0931 libubus: pass an empty UBUS_ATTR_DATA block if msg is NULL on invoke

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 7316515891)
2018-07-26 18:37:18 +02:00
Hans Dedecker
3f0d44b8de firewall: update to latest git HEAD and build with LTO
Reduces .ipk size on MIPS from 41.6k to 41.1k

Changes:

  30463d0 zones: add interface/subnet bound LOG rules
  0e77bf2 options: treat time strings as UTC times
  d2bbeb7 firewall3: make reject types selectable by user
  aa8846b ubus: avoid dumping interface state with NULL message

Cherry picked and squashed from commits:

  a3f2451fba firewall: update to latest git HEAD
  433d71e73e fw3: update to latest git HEAD
  ef96d1e34a firewall: compile with LTO enabled
  1e83f775a3 firewall3: update to latest git HEAD
  3ee2c76ae0 firewall: update to latest git HEAD

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-26 08:49:52 +02:00
John Crispin
69021e9b89 ubus: update to latest git HEAD
884be45 libubus: check for non-NULL data before running callbacks

Signed-off-by: John Crispin <john@phrozen.org>
(cherry picked from commit a5c3bbaf56)
2018-07-25 13:03:58 +02:00
John Crispin
6302f0161b libubox: update to latest git HEAD
c83a84a fix segfault when passed blobmsg attr is NULL

Signed-off-by: John Crispin <john@phrozen.org>
(cherry picked from commit 5dc32620c4)
2018-07-25 13:03:55 +02:00
Aleksandr V. Piskunov
f91a0f3b1a wireguard-tools: add wireguard_watchdog script
This watchdog script tries to re-resolve hostnames for inactive WireGuard peers.
Use it for peers with a frequently changing dynamic IP.
persistent_keepalive must be set, recommended value is 25 seconds.
Run this script from cron every minute:
echo '* * * * * /usr/bin/wireguard_watchdog' >> /etc/crontabs/root

Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
[bump the package release]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 20c4819c7b)
2018-07-25 11:23:35 +01:00
Jason A. Donenfeld
f1dbfa1937 wireguard: bump to 0.0.20180718
80b41cd version: bump snapshot
fe5f0f6 recieve: disable NAPI busy polling
e863f40 device: destroy workqueue before freeing queue
81a2e7e wg-quick: allow link local default gateway
95951af receive: use gro call instead of plain call
d9501f1 receive: account for zero or negative budget
e80799b tools: only error on wg show if all interfaces failk

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[Added commit log to commit description]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 57b808ec88)
2018-07-25 11:23:35 +01:00
Jason A. Donenfeld
ff91b32d26 wireguard: bump to 0.0.20180708
* device: print daddr not saddr in missing peer error
* receive: style

Debug messages now make sense again.

* wg-quick: android: support excluding applications

Android now supports excluding certain apps (uids) from the tunnel.

* selftest: ratelimiter: improve chance of success via retry
* qemu: bump default kernel version
* qemu: decide debug kernel based on KERNEL_VERSION

Some improvements to our testing infrastructure.

* receive: use NAPI on the receive path

This is a big change that should both improve preemption latency (by not
disabling it unconditionally) and vastly improve rx performance on most
systems by using NAPI. The main purpose of this snapshot is to test out this
technique.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
(cherry picked from commit 4630159294)
2018-07-25 11:23:34 +01:00
Jo-Philipp Wich
b84a1c56f3 build: do not alter global default package selection from profiles
This partly reverts ca32373c95 which lets
profiles that suppress packages to alter the package selection for all
devices of the target when building with CONFIG_TARGET_PER_DEVICE_ROOTFS.

In particular, this caused the brcm47xx Edimax PS-1208MFG profile to
disable mtd, dropbear, firewall and other essential packages for all
brcm47xx/generic builds.

To solve this problem, prevent profiles from mangling the global
DEFAULT_PACKAGES selection and restrict the supression of negated
packages to the local PACKAGE variable list only.

Fixes ca32373c95 ("target.mk: let profile remove from DEFAULT_PACKAGES")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

(cherry picked from commit 69ea512c62)
2018-07-21 20:53:43 +02:00
Tim Small
90b15b00a2 WDR4900v1 remove dt node for absent hw crypto.
The WDR4900v1 uses the P1040 SoC, so the device tree pulls in the
definition for the related P1010 SoC.  However, the P1040 lacks the
CAAM/SEC4 hardware crypto accelerator which the P1010 device tree
defines.  If left defined, this causes the CAAM drivers (if present) to
attempt to use the non-existent device, making various crypto-related
operations (e.g. macsec and ipsec) fail.

This commit overrides the incorrect dt node definition in the included
file.

See also:
 - https://bugs.openwrt.org/index.php?do=details&task_id=1262
 - https://community.nxp.com/thread/338432#comment-474107

Signed-off-by: Tim Small <tim@seoss.co.uk>
(cherry picked from commit e97aaf483c)
2018-07-21 18:38:18 +02:00
Kevin Darbyshire-Bryant
a80276235a iproute2: tc: backport canonical cake support
iproute2's tc was updated to support the recently upstreamed cake qdisc.
Backport this canonical support from upstream into iproute2 v4.16

There is no kernel kmod/userspace tc ABI change in this release from the
previous package bump, so everyone can breath a sigh of relief.

This is largely a code style change, the exception to prove the rule:
option 'autorate_ingress' has been changed to 'autorate-ingress' to fit
in with upstream option naming expectations.

No openwrt package (e.g. sqm-scripts) has knowledge of
'autorate_ingress' thus only users who made their own scripts or used
it within the 'dangerous configuration' options of sqm-scripts will be
affected.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-21 09:08:45 +01:00
Felix Fietkau
5b12057d7c build: fix compile error when a package includes itself in PROVIDES
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 7c306ae640)
2018-07-20 15:37:17 +02:00
Christian Lamparter
8a0ad2660a apm821xx: fix sata access freezes
The original vendor's driver programmed the dma controller's
AHB HPROT values to enable bufferable, privileged mode. This
along with the "same priorty for both channels" fixes the
freezes according to @takimata, @And.short, that have been
reported on the forum by @ticerex.

Furtheremore, @takimata reported that the patch also improved
the performance of the HDDs considerably:
|<https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/55>
|It seems your patch unleashed the full power of the SATA port.
|Where I was previously hitting a really hard limit at around
|82 MB/s for reading and 27 MB/s for writing, I am now getting this:
|
|root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real    0m 13.65s
|user    0m 0.01s
|sys     0m 11.89s
|
|root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real    0m 8.41s
|user    0m 0.01s
|sys     0m 4.70s
|
|This means: 121 MB/s reading and 75 MB/s writing!
|
|[...]
|
|The drive is a WD Green WD10EARX taken from an older MBL Single.
|I repeated the test a few times with even larger files to rule out
|any caching, I'm still seeing the same great performance. OpenWrt is
|now completely on par with the original MBL firmware's performance.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-19 18:54:40 +02:00
Luiz Angelo Daros de Luca
a297324a13 base-files: fix wrong sysctl parameter order
Restarting service sysctl echos multiple errors like:

  sysctl: -e: No such file or directory

After the first filename, all remaining arguments are treated
as files.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2018-07-18 19:20:07 +02:00
Kevin Darbyshire-Bryant
1e48546a6a igmpproxy: run in foreground for procd
procd needs processes to stay in foreground to remain under its gaze and
control.  Failure to do so means service stop commands fail to actually
stop the process (procd doesn't think it's running 'cos the process has
exited already as part of its forking routing)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 9d5a246930)
2018-07-18 18:06:15 +01:00
Jo-Philipp Wich
f8cc68670f mediatek: fix parallel build issues in image build code
Drop the parallel-unsafe custom Build/dtb macro and use the .dtb artifacts
produced by the generic image build code.

Also remove unused .dtb references in the mt7623 subtarget.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from commit 8194f9ef4a)
2018-07-17 14:45:33 +02:00
Rafał Miłecki
1086408b17 mtd: improve check for TRX header being already fixed
First of all lengths should be compared after checking all blocks for
being good/bad. It's because requested length may differ from a final
one if there were some bad blocks.

Secondly it makes sense to also compare crc32 since we already have a
new one calculated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 82498a7f7a)
2018-07-16 23:18:45 +02:00
Rafał Miłecki
5dca299fab mtd: support bad blocks within the mtd_fixtrx()
Reading MTD data with (p)read doesn't return any error when accessing
bad block. As the result, with current code, CRC32 covers "data" stored
in bad blocks.

That behavior doesn't match CFE's one (bootloader simply skips bad
blocks) and may result in:
1) Invalid CRC32
2) CFE refusing to boot firmware with a following error:
Boot program checksum is invalid

Fix that problem by checking every block before reading its content.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 0f54489f75)
2018-07-16 23:18:45 +02:00
Kevin Darbyshire-Bryant
5889cf70e9 kmod-sched-cake: bump to 20180716
Bump to the latest cake recipe.

This backports tc class support to kernel 4.9 and other than conditional
kernel compilation pre-processor macros represents the cake that has
gone upstream into kernel 4.19.  Loud cheer!

Fun may be had by changing cake tin classification for packets on
ingress. e.g.

tc filter add dev ifb4eth0 parent 800b: protocol ip u32 match \
ip dport 6981 0xffff action skbedit priority 800b:1

Where 800b: represents the filter handle for the ifb obtained by 'tc
qdisc' and the 1 from 800b:1 represents the cake tin number.  So the
above example puts all incoming packets destined for port 6981 into the
BULK (lowest priority) tin.

f39ab9a Obey tin_order for tc filter classifiers
1e2473f Clean up after latest backport.
82531d0 Reorder includes to fix out of tree compilation
52cbc00 Code style cleanup
6cdb496 Fix argument order for NL_SET_ERR_MSG_ATTR()
cab17b6 Remove duplicate call to qdisc_watchdog_init()
71c7991 Merge branch 'backport-classful'
32aa7fb Fix compilation on Linux 4.9
9f8fe7a Fix compilation on Linux 4.14
ceab7a3 Rework filter classification
aad5436 Fixed version of class stats
be1c549 Add cake-specific class stats
483399d Use tin_order for class dumps
80dc129 Add class dumping
0c8e6c1 Fix dropping when using filters
c220493 Add the minimum class ops
5ed54d2 Start implementing tc filter/class support

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit c729c43b39)
2018-07-16 13:57:31 +01:00
Tony Ambardar
393ee8d0b2 qos-scripts: fix uci callback handling
The previous callback code was fragile, dependent on some UCI callback
bugs and side-effects now fixed in master commit 73d8a6ab.

Update scripts to use callbacks where appropriate and necessary, while
using normal UCI config parsing for all else. This results in smaller,
simpler, more robust code. Use callbacks in generate.sh to only process
'interface' defaults and the varying entries for 'reclassify', 'default'
and 'classify' sections. Also switch qos-stat to use non-callback UCI
handling.

The current changes work independently of 73d8a6ab (i.e. both before and
after), and are consistent with UCI config parsing documentation.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-07-16 09:32:27 +02:00
Tony Ambardar
c9c0fc28a9 base-files: fix UCI config parsing and callback handling
There are several long-standing issues present in the UCI shell API as
documented in https://wiki.openwrt.org/doc/devel/config-scripting. They
relate both to high-level, user-defined callback functions used to
process UCI config files, and also to low-level functions used within
scripts generally.

The related problems have been encountered now and in the past, e.g.
https://forum.openwrt.org/viewtopic.php?id=54295, and include:

a) UCI parsing option() function and user-defined option_cb() callbacks
being erroneously called during processing of "list" config file entries;

b) normal usage of the low-level config_set() unexpectedy calling any
defined option_cb() if present; and

c) handling of the list_cb() not respecting the NO_CALLBACK variable.

Root causes include a function stack "inversion", where the low-level
config_set() function incorrectly calls the high-level option() function,
intended only for processing the "option" keyword of UCI config files.

This change addresses the inversion and other issues, making the option
handling code more consistent and smaller, and simplifying developers'
usage of UCI callbacks.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2018-07-16 09:32:06 +02:00
Christian Lamparter
aee917a5a2 apm821xx: fix usb-otg on 4.14
Starting with 4.14, the "amcc,dwc-otg" needs to be used
in order to get the usb-otg to work.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 12b80f1cab)
2018-07-16 08:43:15 +02:00
Hans Dedecker
3539430b3d odhcp6c: add noserverunicast config option for broken DHCPv6 servers
Fix broken DHCPv6 servers which provide the server unicast option but
do not reply on DHCPv6 renew messages directed to the IPv6 address
contained in the server unicast option which results in broken IPv6
connectivity.

67ae6a7 odhcp6c: add option to ignore Server Unicast option

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-07-15 22:23:09 +02:00
Hans Dedecker
6363377c47 odhcp6c: update to latest git HEAD
b99c1f6 odhcp6c: remove len check in option parsing handle

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-07-15 22:22:26 +02:00
Hans Dedecker
ce8cab388a odhcp6c: user string option support
ca8822b odhcp6c: add support for user string options

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-07-15 22:22:17 +02:00
David Bauer
dc52b7b104
ipq40xx: add get_status_led to diag.sh
This commit adds the get_status_led method to diag.sh, which sets the
boot-led as status-led for scripts using this method to get a
status-led.

This method is used platform-independent in downstream project gluon to
set the LED used to indicate the config-mode.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4fc005197a)
2018-07-15 20:08:44 +02:00
Jo-Philipp Wich
7fc7128b08 OpenWrt v18.06.0-rc2: revert to branch defaults
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-15 17:54:39 +02:00
Jo-Philipp Wich
4de335bdbe OpenWrt v18.06.0-rc2: adjust config defaults
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-15 17:54:33 +02:00
Jo-Philipp Wich
e4d0ee5af5 uhttpd: update to latest Git head
db86175 lua: honour size argument in recv() function
d3b9560 utils: add uh_htmlescape() helper
8109b95 file: escape strings in HTML output
393b59e proc: expose HTTP Origin header in process environment
796d42b client: flush buffered SSL output when tearing down client ustream

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit b54bef2058)
2018-07-15 14:30:50 +02:00
Matthias Schiffer
a7b2764879
include/prereq-build.mk: explicitly check for -f flag when using busybox time
On Debian, busybox does have a time applet, but it does not support the -f
flag. Catch this in prereq check to give users to proper error message.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
(cherry picked from commit b123921a92)
2018-07-14 15:48:14 +02:00
Matthias Schiffer
bc7abe8729
include/kernel-build.mk: fix kernel rebuild on backport patch changes
An incorrect variable name was referenced in KERNEL_FILE_DEPENDS, leading
to the omission of the backport-* patch dirs in the generation of the
prepared stamp name.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
(cherry picked from commit 36fa1bbf6f)
2018-07-14 13:10:08 +02:00
Felix Fietkau
c99c70e053 kernel: backport page fragment API changes from 4.10+ to 4.9
mt76 now relies on this API

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-14 11:43:18 +02:00
Kevin Darbyshire-Bryant
3e81365141 kernel: gen_stats: Fix netlink stats dumping in the presence of padding
Backport hot off the press upstream netlink patch.  Fixes stats display
from CAKE qdisc on MIPS allowing us to bump CAKE to latest version.

The gen_stats facility will add a header for the toplevel nlattr of type
TCA_STATS2 that contains all stats added by qdisc callbacks. A reference
to this header is stored in the gnet_dump struct, and when all the
per-qdisc callbacks have finished adding their stats, the length of the
containing header will be adjusted to the right value.

However, on architectures that need padding (i.e., that don't set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added
before the stats, which means that the stored pointer will point to the
padding, and so when the header is fixed up, the result is just a very
big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS
struct, this problem has been mostly invisible, but we exposed it with
the netlink attribute-based statistics in CAKE.

Fix the issue by fixing up the stored pointer if it points to a padding
nlattr.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 3698b34a00)
2018-07-13 16:08:34 +01:00
Felix Fietkau
dd1f97b37d ramips: clean up and fix MT7621 NAND driver issues
- remove misaligned custom buffer allocation in the NAND driver
- remove broken bounce buffer implementation for 16-byte align

Let the MTD core take care of both

Fixes messages like these:
[  102.820541] Data buffer not 16 bytes aligned: 87daf08c

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 17:01:41 +02:00
Felix Fietkau
68f40d7ecc mt76: update to the latest version
08719b1 mt76: use a per rx queue page fragment cache
4d2c565 mt76x2: reset HW before probe
f622975 mt76x2: fix CCK protection control frame rate
6780375 mt76x2: add frame protection support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 16:39:55 +02:00
Felix Fietkau
16a9ddfe64 ramips: ethernet: use own page_frag_cache
Using the NAPI or netdev frag cache along with other drivers can lead to
32 KiB pages being held for a long time, despite only being used for
very few page fragment.
This can happen if the ethernet driver grabs one or two fragments for rx
ring refill, while other drivers use (and free up) the remaining
fragments. The 32 KiB higher-order page can only be freed once all users
have freed their fragments, which only happens after the rings of all
drivers holding the fragments have wrapped around.

Depending on the traffic patterns, this can waste a lot of memory and
look a lot like a memory leak

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 16:39:49 +02:00
Felix Fietkau
0e6cfb6919 ramips: ethernet: use skb_free_frag to free fragments
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 16:39:46 +02:00
Matthias Schiffer
514a4b3e1b
include/feeds.mk: rework generation of opkg distfeeds.conf
Allow enabling/commenting/disabling each feed individually by using a
tristate config symbol.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
(cherry picked from commit 16035a7dd3)
2018-07-12 21:26:42 +02:00
Matthias Schiffer
3e89f58a5e
base-files: fix feed list in PKG_CONFIG_DEPENDS
FEEDS_ENABLED and FEEDS_DISABLED are derived from FEEDS_AVAILABLE, not
FEEDS_INSTALLED.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
(cherry picked from commit 6dac434c00)
2018-07-12 21:26:41 +02:00