Commit Graph

15286 Commits

Author SHA1 Message Date
Hans Dedecker
d405edb481 omcproxy: optimize interface triggers
Before installing an interface triggger check if an interface
trigger for the interface is already in place.
This avoids installing identical interface triggers for a given
interface

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-29 16:08:31 +01:00
David Santamaría Rogado
df8f8bad08 omcproxy: fix installation of interface triggers (FS#1972)
omcproxy will not start up if either the downlink or uplink interface is
not up at boottime as the interface triggers are not correctly
installed.

Further rework omcproxy init to make use of network functions defined
in network.sh; set proper family and proto options in procd firewall
rules.

Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-29 16:07:51 +01:00
Mathias Kresin
a5030f8b10 iwinfo: update to latest git
dd508af iwinfo: fix QCA9984 vendor id
0eaabf1 iwinfo: add device id for Atheros AR9287
6e998ec iwinfo: add device id for MediaTek MT7612E
5aa8c54 libiwinfo: nl80211: add mesh stats on assoclist.
77a9e98 iwinfo: Add Mikrotik R11e-2HPnD and R11e-5HacT to hardware list

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-29 12:35:47 +01:00
Rafał Miłecki
ae622c93b3 Revert "samba36: add hotplug support"
This reverts commit fd569e5e9d.

After an extra review & discussion few concerns were raised regarding
that feature:
1) It reacts to hotplug.d "block" events instead of more accurate (but
   currently unavailable) "mount" events.
2) It requires *something* to mount block device before samba hotplug.d
   gets fired. Otherwise samba_add_section() will just return.
3) It doesn't reload Samba which some users may expect
4) It operates on /etc/ which is not a right place for autogenerated
   ephemeral config.
5) It doesn't include any cleanup for non-existing shares.

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-28 23:09:38 +01:00
Felix Fietkau
3c899aaf11 mt76: update to the latest version
417ab77 mt7603: improve recovery from PSE reset failure
fea7ad8 mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core
9d009be mt7603: add dynamic sensitivity tuning based on false CCA events
2c8e9ac mt7603: initialize channel maximum power from eeprom data
b2cc29b mt76: move mt76x02_get_txpower to mt76 core
6203d46 mt7603: add support for setting transmit power
294e095 mt7603: reset DMA scheduler on MT7628
8178f0d mt7603: apply efuse data only when it exists
e67e551 mt76: dma: remove napi from mt76_dma_rx_fill signature
0490bd2 mt76: usb: do not build the skb if reported len does not fit in buf_size
eb076ae mt76: Add missing include of linux/module.h
1d2819e mt76: fix typo in mt76x02_check_mac_err routine
9c9fae3 mt76: mac: run mt76x02_mac_work routine atomically
6be90b6 mt76: usb: avoid queue/status spinlocks while passing tx status to mac80211
40dad32 mt76x0: pci: fix ACS support
d94e9c4 mt76x02: do not set protection on set_rts_threshold callback
0d83d73 mt76x02: fixup MT_PROT_RATE_* defines
628f8d7 mt76x02: set protection according to ht operation element
f7d8c17 mt76x0: configure MT_VHT_HT_FBK_CFG1
10f57cf mt76x2: add static qualifier to mt76x2_init_hardware
37b2ad3 mt76: dfs: run mt76x02_dfs_set_domain atomically
51b6daf mt76x2: init: set default value for MT_TX_LINK_CFG
9661da4 mt76: add energy detect CCA support to mt76x{0,2}e drivers
876d0e9 mt76: mac: minor optimizations in mt76x02_mac_tx_rate_val
c78e317 mt76: dma: do not build skb if reported len does not fit in buf_size
3598046 mt76: mmio: introduce mt76x02_check_tx_hang watchdog

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-12-28 16:20:56 +01:00
Stijn Tintel
c5b89abe2a lldpd: consolidate CONFIGURE_VARS
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-12-28 12:19:32 +02:00
Robert Marko
c9f6116fd0 kernel: modules: usb: Add DWC3 Qualcomm kmod
Since kernel 4.18 support for Qualcomm glue layer was
moved from DWC3 OF Simple to a separate DWC3 QCOM module.
So lets add it and make it depend on 4.19 kernel and make
sure that DWC3 OF Simple is not included if 4.19 is used.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-12-27 14:06:38 +01:00
Robert Marko
d0bf8f4fd6 ath10k-ct: Update to 2018-12-20
This version removes a lot of unusefull warnings that would quickly overflow the dmesg.
Warnings like this:
ath10k_ahb a800000.wifi: Invalid legacy rate 26 peer stats
ath10k_ahb a000000.wifi: Invalid VHT mcs 15 peer stats
On this version I only had 2 warnings at all.
Tested on 8devices Jalapeno.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-12-24 19:18:07 +01:00
Daniel Engberg
9a37c95431 wireguard: Update to snapshot 0.0.20181218
Update WireGuard to 0.0.20181218

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-12-24 12:58:22 +01:00
Deng Qingfang
0babdf2d2b curl: bump to 7.63.0
Refresh patches, for changes in version 7.63.0 see https://curl.haxx.se/changes.html#7_63_0

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-24 09:46:06 +01:00
Daniel F. Dickinson
8d2a9e8027 ath9k: Avoid OF no-eeprom quirks when no qca,no-eeprom
Based on the process of discovery in
https://github.com/openwrt/openwrt/pull/1613, it has become clear
that (at least) the PowerCloud System CR5000 was unable to get
working 5GHz wireless (PCIe) because AH_USE_EEPROM was unconditionally
masked out, not only when qca,noeeprom was in the DTS.

This patch moves mask AH_USE_EEPROM into the if ... qca,noeeprom
OF test.

Thanks to Christian Lampartar (@chunkeey) for the heavy lifting and help.

Patch has been prepared for upstream and will be submitted after review
by @chunkeey and @xdarklight.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
2018-12-22 15:08:24 +01:00
Hans Dedecker
f36bc3f9b1 odhcpd: use PKG_VERSION default value
Instrad of defining PKG_VERSION in the Makefile use the PKG_VERSION
default value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-21 18:30:01 +01:00
Christian Lamparter
a8bae35914 elfutils: fix gcc 8.0+ multistatement macros warning/error
GCC 8.0+ <https://gcc.gnu.org/gcc-8/changes.html> introduces a new
warning about unsafe macros expanding to multiple statements used
as a body of a statement such as if, else, while, switch, or for.

In combination with -Werror this can cause the compilation to fail:

|In file included from xmalloc.c:37:
|xmalloc.c: In function 'xmalloc':
|system.h:39:2: error: macro expands to multiple statements [-Werror=multistatement-macros]
|  fflush(stdout); \
|  ^~~~~~
|xmalloc.c:52:5: note: in expansion of macro 'error'
|     error (EXIT_FAILURE, 0, _("memory exhausted"));
|     ^~~~~
|xmalloc.c:51:3: note: some parts of macro expansion are not guarded by this 'if' clause
|   if (p == NULL)
|   ^~

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-20 19:21:42 +01:00
Hans Dedecker
9b8ea3623b odhcpd: add PKG_VERSION again
Fixes commit 63d0752ca8

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-20 16:50:08 +01:00
Hans Dedecker
63d0752ca8 odhcpd: update to latest git HEAD
2d2a3b8 odhcpd: switch to libubox container_of implementation
2a71c1e treewide: switch to libubox ARRAY_SIZE immplementation

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-20 15:43:31 +01:00
Koen Vandeputte
4b60ea236e mac80211: backport upstream fixes
d350a0f43118 nl80211: fix memory leak if validate_pae_over_nl80211() fails
a50e5fb8db83 mac80211: fix a kernel panic when TXing after TXQ teardown

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-12-20 14:03:39 +01:00
Jo-Philipp Wich
62e4395ac7 mwlwifi: update to version 10.3.8.0-20181210
67ce93e Fix compile error on kernel 4.15+
c1345bb Change driver version to 10.3.8.0-20181210.
9cb815b Upgrade 88W8997 firmware to 8.4.4.6.
433fc6d Fix non-backport use of nla_parse before 4.12.0
3b36e21 Use wiphy_to_ieee80211_hw() instead of wiphy_priv()
97ebcfa Change driver version to 10.3.8.0-20181120.
f000953 Upgrade 88W8997 firmware to 8.4.4.4.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-20 11:33:49 +01:00
Jo-Philipp Wich
c0248183a4 ath10k-firmware: update Candela Tech firmware images
- Removed an assert from wave-1 firmware images
 - Fix three recently reported firmware crashes in wave-2 images

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-20 09:23:45 +01:00
Jo-Philipp Wich
de7ae9a0ef iproute2: require nls infrastructure due to libelf linking
Depending on the global nls support configuration in the buildroot, the
linked libelf.so library might depend on libintl.so.

Import the nls.mk helper to set library prefixes and flags accordingly
in this case.

Ref: https://github.com/openwrt/packages/issues/7728#issuecomment-448760140
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-20 08:13:24 +01:00
Jo-Philipp Wich
f2c6e2c385 elfutils: produce correct libelf.pc file when building with full nls
When building with full lagnuage support, libelf.so will depend on and
link with libintl.so so we need to change the pkg-config template to
reflect this library dependency.

Also change the Makefile to only pass --disable-nls to configure when
the full nls support is actually disabled in the buildroot config.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-20 08:13:24 +01:00
Jo-Philipp Wich
386803a006 iproute2: only link libelf where needed
The iproute2 build system links libelf support to every utility while only
the tc program actually requires libelf specific functionality.

Unfortunately the BPF ELF functionality is not confined into an own
compilation unit but added to the existing bpf.c sources of the shared
static libutil.a, causing every iproute2 applet to pick up an implicit
libelf.so dependency.

In order to avoid this requirement, patch the iproute2 build system to
create both a libutil.a and a libutil-elf.a, with the former being built
without libelf functionality and to only link the tc applet with the libelf
enabled libutil.

Finally, make the tc package depend on libelf to solve compilation errors.

Ref: https://github.com/openwrt/packages/issues/7728
Fixes: FS#2011
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-19 10:50:02 +01:00
Tony Ambardar
4b4e6a04ac elfutils: install library files for pkg-config
Support other packages using pkg-config to query existence and details of
libelf and libdw libraries at build time.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-12-19 10:49:57 +01:00
Tony Ambardar
10a2ccb7fc base-files: install missing /etc/iproute2/ematch_map
This file is needed to properly use the tc ematch modules present in
kmod-sched-core and kmod-sched. It is a read-only index file of ematch
methods used only by tc.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-12-19 07:33:35 +01:00
Stijn Tintel
b209e2b3b0 ubox: bump to git HEAD
876c7f5 kmodloader: load_modprobe: abort after 2 attempts

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-12-18 23:17:39 +02:00
Biwen Li
328530c6e7 layerscape: add LS1021AIOT board support
The LS1021A-IoT gateway reference design based on the
QorIQ LS1021A processor is a purpose-built, small
footprint hardware platform with a wide array of
high-speed connectivity and low-speed serial interfaces
to support secure delivery of IoT services for home,
business or other commercial location.

- Combines standards-based, open source software with a
  feature-rich IoT gateway design to establish a common,
  open framework for secured IoT service delivery and
  management.

- Provides a wide assortment of high-speed and serial-based
  connectivity in a compact, highly secure design.

- High efficiency through the use of the Arm-based QorIQ
  LS1021A embedded processor.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
2018-12-18 20:17:23 +01:00
Petr Štetiar
11945174cf kernel: Fix usb-chipidea dependency on ulpi.ko for 4.19
It seems, that since Linux 4.18-rc2 ci_hdrc depends on ulpi.

 commit a930d8bd94d8db7715d1af74299f710b1fb22fc8
 Author: Fabio Estevam <fabio.estevam@nxp.com>
 Date:   Wed Jul 4 10:09:58 2018 -0300

    usb: chipidea: Always build ULPI code

    Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel
    hang on imx51 systems that use the ULPI interface and do not select the
    CONFIG_USB_CHIPIDEA_ULPI option.

    In order to avoid such potential misuse, let's always build the
    chipidea ULPI code into the final ci_hdrc object.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-12-18 20:17:22 +01:00
Michael Heimpold
c1c14c9e56 uboot-envtools: fix configuration for I2SE Duckbills
After changing board names to DT compat string, we also need to
adjust the script which generates uboot-env configuration files.

Fixes: e880a30549 ("mxs: use generic sysinfo board detection")
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-12-18 20:17:22 +01:00
Stefan Lippers-Hollmann
02b5efe1fa uboot-envtools: ath79: add support for the Buffalo BHR-4GRV2
According to https://github.com/openwrt/openwrt/pull/1527, support
for the Buffalo BHR-4GRV2 in ath79 requires repartitioning from
an initramfs image, make this easier by supporting uboot-envtools
support out of the box.

Build tested, but not runtime tested.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2018-12-18 20:17:16 +01:00
Stefan Lippers-Hollmann
4200dae367 uboot-envtools: ath79: add support for the Buffalo WZR-HP-AG300H
Port support for the Buffalo WZR-HP-AG300H from the ar71xx target to
ath79 as well.

Build- and runtime tested on the Buffalo WZR-HP-AG300H.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2018-12-18 20:17:09 +01:00
Hans Dedecker
83109450ce dropbear: fix dropbear startup issue
Interface triggers are installed by the dropbear init script in case an
interface is configured for a given dropbear uci section.
As dropbear is started after network the interface trigger event can be
missed during a small window; this is especially the case if lan is
specified as interface.
Fix this by starting dropbear before network so no interface trigger
is missed. As dropbear is started earlier than netifd add a boot function
to avoid the usage of network.sh functions as call to such functions will
fail at boottime.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2018-12-18 19:43:22 +01:00
Syrone Wong
6263a9baa3 ipset: update to 7.1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2018-12-17 21:57:22 +01:00
Kevin Darbyshire-Bryant
3f7de917be netifd: fix ipv6 multicast check in previous commit
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-12-17 19:05:07 +00:00
Rafał Miłecki
fa211623d0 linux-firmware: broadcom: package 4366C0 FullMAC firmware
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-17 12:51:00 +01:00
Rafał Miłecki
8b4f6a1d2a linux-firmware: update to the commit from 2018-12-16
It includes e.g. new Broadcom FullMAC firmwares for 4366B1 and 4366C0.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-17 11:42:45 +01:00
Kevin Darbyshire-Bryant
d112d095a9 netifd: support configuring class e 240.0.0.0/4 addresses
cd089c5 proto: Support class-e addressing in netifd

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-12-17 09:27:53 +00:00
Hauke Mehrtens
201058b35c base-files: Fix netdev led trigger
In the upstream netdev led trigger the one mode file was replaced by 3
files named rx, tx and link. Fix the netdev trigger configuration code
to use the modified API.

Fixes: aa3b6a08c5 ("kernel: Replace ledtrig-netdev with upstream backport")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 20:11:44 +01:00
Hans Dedecker
3262fce1cd omcproxy: use PROJECT_GIT in PKG_SOURCE_URL
Switch PKG_SOURCE_URL to git.openwrt.org

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-16 19:23:36 +01:00
Kevin Darbyshire-Bryant
d6c6d1c7a7 Revert "elfutils: install library files for pkg-config"
This reverts commit 216397b812.

Due to:

Package ip-tiny is missing dependencies for the following libraries:
libelf.so.1
Makefile:187: recipe for target '/var/lib/buildbot/slaves/slave-lede-builds4/mips_24kc/build/sdk/bin/packages/mips_24kc/base/ip-tiny_4.19.0-6_mips_24kc.ipk' failed

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-12-16 17:20:16 +00:00
Hans Dedecker
0074a5e67e omcproxy: switch to OpenWrt github repo
Switch to OpenWrt github repo in PKG_SOURCE_URL so we can
remove the out of tree patch

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-16 18:09:23 +01:00
Hauke Mehrtens
835947ce64 hostapd: Make eapol-test depend on libubus
The eapol-test application also uses the code with the newly activated
ubus support, add the missing dependency.

Fixes: f5753aae23 ("hostapd: add support for WPS pushbutton station")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 14:25:41 +01:00
Hauke Mehrtens
9e7c4702a1 mbedtls: fix compilation on ARM < 6
mbedtls uses some instructions introduced in ARMv6 which are not
available in older architectures.

Fixes: 3f7dd06fd8 ("mbedtls: Update to 2.14.1")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 14:03:06 +01:00
Roman Bazalevsky
f332ae3c43 kernel/modules: HMC5843 3D-compass kernel module support enabled.
Signed-off-by: Roman Bazalevsky <rvb@rvb.name>
2018-12-16 00:57:20 +01:00
Daniel Engberg
3f7dd06fd8 mbedtls: Update to 2.14.1
Update mbedtls to 2.14.1

This fixes:
* CVE-2018-19608: Local timing attack on RSA decryption

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Update to 2.14.1]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 00:57:20 +01:00
Brett Mastbergen
2b6eab507a netfilter: Add fib support for nftables
Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
2018-12-16 00:57:20 +01:00
Deng Qingfang
b88ce25e81 mt76: fix dependencies
Only MT76x0U needs kmod-mt76x02-usb

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-16 00:57:20 +01:00
Rosen Penev
1e98d985bb swconfig: Add missing include
Fixes these warnings:

swlib.c:455:18: warning: implicit declaration of function 'isspace'
swlib.c:461:9: warning: implicit declaration of function 'isdigit'

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-12-16 00:57:19 +01:00
Rosen Penev
d2b16a59d5 f2fs-tools: Update to 1.12.0
Added two upstream mailing list patches that fix behavior under big endian
systems. Issue was present since version 1.11.0.

Tested on Turris Omnia.

Original discussion: https://github.com/openwrt/openwrt/pull/1575

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-12-16 00:57:19 +01:00
Ben Greear
d8f861f408 rtl8812au: Add out-of-tree driver.
Use a forked version of the rtl8812au driver that works better
with OpenWRT (fix compile bugs, fix phy MAC address, etc)

Signed-off-by: Ben Greear <greearb@candelatech.com>
[update to 2018-11-16, replace rtw_byteorder.h, rename folder]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 00:57:19 +01:00
Eneas U de Queiroz
cb4d00d184 omcproxy: fix compilation on little-endian CPUs
Don't use cpu_to_be32 outside of a function.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-12-16 00:57:19 +01:00
Michael Yartys
cc5c63f217 ath10k-firmware: update all CT firmware variants
Wave-1 firmware (988x, 9887): bug fixes
Wave-2 firmware (4019, 9888, 99x0, 9984): fix protected management frames, rate-ctrl fixes, and performance improvements

Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
2018-12-15 15:25:24 +01:00