Commit Graph

26216 Commits

Author SHA1 Message Date
Petr Štetiar
059ef70fd3 imx: copy config and patches from 5.10 to 5.15
So the upcoming changes needed for 5.15 can be reviewed easily.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-30 23:39:08 +02:00
Rafał Miłecki
9ac80a47ea bcm53xx: prepare kernel 5.15 support
Tested on Luxul XWR-3150 (boot, NAND, PCIe, switch, Ethernet).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-03-30 23:22:46 +02:00
John Audia
c41da167d2 kernel: bump 5.10 to 5.10.109
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
2022-03-30 18:33:38 +02:00
Matthias Schiffer
aee9ccf5c1
ath79: fix label MAC address for Ubiquiti UniFi AP Outdoor+
The label has the MAC address of eth0, not the WLAN PHY address. We can
merge the definition back into ar7241_ubnt_unifi.dtsi, as both DTS
derived from it use the same interface for their label MAC addresses
after all.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-30 17:48:30 +02:00
David Bauer
9a0155bc4f ath79: add 5.15 support for generic subtarget
Add Kernel 5.15 patches + config. This is currently only available for
the generic subtarget, as it was exclusively tested with this target.

Tested-on: Siemens WS-AP3610, Enterasys WS-AP3705i

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-03-30 17:28:39 +02:00
SHIMAMOTO Takayoshi
fc94c0d203 bcm53xx: add switch ports for Buffalo WZR-900DHP & re-enable it
Specify the switch ports in the DTS file.
Re-enable it after it was disabled by commit e9672b1a8f ("bcm53xx: switch to the
upstream DSA-based b53 driver").

Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
[rmilecki: reword commit & drop unneeded whitespace change]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-03-30 16:20:50 +02:00
Rafał Miłecki
a721fb9f83 bcm53xx: backport DT changes from 5.17 & 5.18
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-03-30 16:20:25 +02:00
Rafał Miłecki
a6dc0f680d bcm53xx: drop dead upgrade code
platform_nand_pre_upgrade() is gone since commit 790692dde2
("base-files: drop support for the platform_nand_pre_upgrade()").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-03-29 16:14:54 +02:00
Arınç ÜNAL
72b9b721d7 bcm53xx: add support for Asus RT-AC88U
Asus RT-AC88U is an AC3100 router featuring 9 Ethernet ports over the
integrated Broadcom and the external Realtek switch.

Hardware info:
* Processor: Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
* Switch: BCM53012 in BCM4709C0KFEBG & external RTL8365MB
* DDR3 RAM: 512 MB
* Flash: 128 MB (ESMT F59L1G81LA-25T)
* 2.4GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC
* 5GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC
* Ports: 8 Ports, 1 WAN Ports

Flashing instructions:
* Boot to CFE Recovery Mode by holding the reset button while power-on.
* Connect to the router with an ethernet cable.
* Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0.
* Head to http://192.168.1.1.
* Reset NVRAM.
* Upload the OpenWrt image.

CFE bootloader may reject flashing the image due to image integrity check.
In that case, follow the instructions below.

* Rename the OpenWrt image as firmware.trx.
* Run a TFTP server and make it serve the firmware.trx file.
* Run the URL below on a browser or curl.
  http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
[rmilecki: mark BROKEN until we sort out nvram & CFE recovery]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-03-29 16:10:07 +02:00
Hauke Mehrtens
34fb36e165 realtek: Fix tc default package
The tc package does not exits any more, it was split into tc-tiny,
tc-full and tc-bpf. Include tc-bpf by default into realtek images.

This increases the compressed image size by about 232KBytes.

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-03-29 13:43:01 +02:00
Hauke Mehrtens
469030659c realtek: Use firewall4
The realtek target is not a router, but basic device, see DEVICE_TYPE.
The basic device type does not come with firewall by default, see
include/target.mk for details. The realtek target extended
DEFAULT_PACKAGES manually with firewall.

This changes the defaults to take firewall4 and nftables instead of
firewall and iptables. This also adds the additional package
kmod-nft-offload.

The only difference to the router type is the missing ppp,
ppp-mod-pppoe, dnsmasq and odhcpd-ipv6only package.

This increases the compressed image size by about 422KBytes.

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-03-29 13:42:56 +02:00
Hauke Mehrtens
2acebbdcaa realtek: Remove dnsmasq and odhcpd-ipv6only from default
Do not include the dnsmasq and odhcpd-ipv6only package by default any
more. These services are not needed on a switch. If someone needs this
it is still possible to use opkg or image builder to add them.

This decreases the compressed image size by about 165KBytes.

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-03-29 13:42:29 +02:00
Petr Štetiar
f32ecb9665 sunxi: update config for 5.15
Refresh kernel config with `make kernel_oldconfig` make target.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
177e79c218 sunxi: refresh kernel 5.15 patches
So the patches apply cleanly.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
c80088b407 sunxi: rebase sun50i-h5-nanopi-r1s-h5.dts onto 5.15
So the patch can be applied on top of 5.15 kernel.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
6d1dd34732 sunxi: enable 5.15 as testing kernel
So anyone interested can help with new kernel version integration and
testing.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
c707e1bc04 sunxi: copy config and patches from 5.10 to 5.15
So the upcoming changes needed for 5.15 can be reviewed easily.

Removed following upstreamed patches:

 * 062-add-sun8i-h3-zeropi-support.patch
 * 100-sunxi-h3-add-support-for-nanopi-r1.patch
 * 101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
be9a69caa8 kernel: modules: fix kmod-mdio-devres dependency for 5.15
Fixes following build issues:

 Package kmod-r8169 is missing dependencies for the following libraries:
 mdio_devres.ko

 Package kmod-ixgbe is missing dependencies for the following libraries:
 mdio_devres.ko

 Package kmod-amd-xgbe is missing dependencies for the following libraries:
 mdio_devres.ko

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
12c33d99c8 x86: update config for 5.15
Refresh kernel config with `make kernel_oldconfig` make target.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
9b3bc5d119 x86: enable 5.15 as testing kernel
So anyone interested can help with new kernel version integration and
testing.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
7ef75445c5 x86: copy config and patches from 5.10 to 5.15
So the upcoming changes needed for 5.15 can be reviewed easily.
Removing following patches backported from 5.15:

 * 101-v5.15-mfd-lpc_ich-Enable-GPIO-driver-for-DH89xxCC.patch
 * 102-v5.15-platform-x86-add-meraki-mx100-platform-driver.patch

Removed upstreamed patch `300-pcengines_apu1_led.patch` in commit
1b40faf7e4ab ("leds: apu: extend support for PC Engines APU1 with newer
firmware")

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
972f2bff6a generic: backport 5.16 fix for hv utils build failure
Backports following fix:

 hv: utils: add PTP_1588_CLOCK to Kconfig to fix build

 The hyperv utilities use PTP clock interfaces and should depend a
 a kconfig symbol such that they will be built as a loadable module or
 builtin so that linker errors do not happen.

 Prevents these build errors:

 ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit':
 hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister'
 ld: drivers/hv/hv_util.o: in function `hv_timesync_init':
 hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register'

References: https://lore.kernel.org/stable/20220328093115.7486-1-ynezz@true.cz/T/#u
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
756e71b03f kernel: generic: add more missing kernel symbols for 5.15
Found while adding 5.15 support for x86/sunxi targets.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Daniel Golle
506ddce90f
generic: 5.15: fix FIT partition parser on block partitions
Using set_disk_ro() doesn't have the desired effect and instead of
just setting the single partition to be read-only it affects the
whole disk. Use the bd_read_only flag in struct block_device instead
to mark a partition being read-only.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-29 01:56:05 +01:00
Daniel Golle
1c7e146f7e
layerscape: make boot filesystem reproducible
Set timestamp option for make_ext4fs to make boot filesystem
reproducible.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-28 20:52:54 +01:00
Daniel Golle
44b457168e
mvebu: make boot filesystem reproducible
Set timestamp option for make_ext4fs to make boot filesystem
reproducible.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-28 20:52:49 +01:00
Felix Fietkau
92081f9a34 ramips: fix kernel module build errors on linux 5.15
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-28 11:03:13 +02:00
Daniel Golle
09f6200198 malta: enable testing kernel 5.15
Nothing special is needed here, just add KERNEL_TESTING_PATCHVER.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-28 02:32:29 +01:00
Felix Fietkau
a3764ee29d ramips: add linux 5.15 support for mt7621
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-27 21:36:40 +02:00
Marek Behún
9caa6f0aa7 kernel: Backport mv88e6xxx patch to keep pvid at 0 if VLAN-unaware and remove hack
Backport patch
  8b6836d82470 ("net: dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware")
from 5.15.

Keeping the pvid at 0 when VLAN-unaware makes it possible to drop the
hack introduced in commit 920eaab1d8 ("kernel: DSA roaming fix for
Marvell mv88e6xxx"). Dropping the hack makes it possible to use VLAN
interfaces with VID 1 on DSA ports without problems with FDB.

Signed-off-by: Marek Behún <kabel@kernel.org>
2022-03-27 17:38:49 +01:00
Ansuel Smith
876a49ca62 ipq806x: 5:15: fix dedicated krait cpufreq
Fix dedicated cpufreq for kernel 5.15 as they changed module
order and now it can happen that cpufreq probe after cache driver.
Also add lock between cache scaling in set_target as it's now required
by opp functions.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 16:16:07 +01:00
Ansuel Smith
af70a27b38 ipq806x: backport nand raname to kernel 5.10
Rename nand_controller to nand in kernel 5.10 to use the same dts across kernel version.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 16:16:07 +01:00
Ansuel Smith
e86dfd0a44 ipq806x: rework rootfs conflicts patch for smem
Now that smem actually free the leaked parts, when
a rootfs partition is detected, the kernel panics as
it try to free the static space allocated for the "ubi"
name. Change the logic and fix the name at the allocate_partition
function to correctly free the space allocated by smem.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 16:16:07 +01:00
Ansuel Smith
8cc2caed58 ipq806x: 5:15: add testing kernel version
Refresh patch for 5.15
Rework tweak patch to sync with upstream ipq8064 dtsi and fix
regression introduced.
Rename nand_controller to nand in every dts.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 16:16:07 +01:00
Ansuel Smith
327677a71d ipq806x: 5:15: drop upstream patch
- Drop stmmac upstream patches
- Drop tsens patches
- Drop ADM driver
- Drop SMEM parser

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 16:16:07 +01:00
Ansuel Smith
4c5d5c66ca ipq806x: 5:15: refresh config
Refreshed using make kernel_menuconfig CONFIG_TARGET=generic

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 16:16:07 +01:00
Ansuel Smith
3064e76c94 ipq806x: 5:15: copy config and patch from 5.10
Copy config and patch from kernel 5.10 to kernel 5.15

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 16:16:07 +01:00
Aleksander Jan Bajkowski
26e7c22757
kernel: sort generic configuration
This was done by executing these commands:

$ ./scripts/kconfig.pl '+' target/linux/generic/config-5.10 /dev/null > target/linux/generic/config-5.10-new
$ mv target/linux/generic/config-5.10-new target/linux/generic/config-5.10

$ ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new
$ mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-27 15:50:14 +01:00
Aleksander Jan Bajkowski
1e83d53fd9 kernel: add more missing config symbols for 5.15
Add more disabled config options found in malta
target to generic.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
2022-03-27 15:45:50 +01:00
Daniel Golle
c3029f3652
mediatek: add 5.15 config for mt7623 and mt7629
Compile tested both with all kernel modules.
Run-time tested mt7623 on BananaPi-R2.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-27 14:51:04 +01:00
Daniel Golle
f08fc0747e
kernel: 5.15: add more missing symbols
Add various Kconfig symbols which surfaced when building with all
kernel modules enabled.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-27 14:50:55 +01:00
Christian Lamparter
35d2bbc29b ipq40xx: stop chromium sub-target builds on the buildbots
the buildbots are having troubles with the image.
They seem to get "Killed" at the last step of the KERNEL rule:

|/cros-vbutil -k zImage.itb.vboot -c "root=PARTUUID=%U/PARTNROFF=1" -o zImage.itb.vboot.new
|make[4]: *** [Makefile:18: zImage.itb.vboot] Killed

Since the Google Wifi (Gale) is currently the only target in
this sub-target. So this means that subtarget has to be disabled
from the time being to not be picked up by the builders.

For people wanting to checkout out OpenWrt on the Google Wifi:
please compile it locally.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-27 15:39:27 +02:00
Christian Lamparter
eeb8fd4ce7 gpio-cdev: move kmod-leds-uleds dependency to MX100
The inclusion of the kmod-leds-uleds into the userspace
nu801 package causes a circular dependency inside the
buildsystem... which causes it to be picked regardless
of other DEPENDS values.

In case of the mx100, this could be solved by moving the
kmod-leds-uled dependency to the kmod-meraki-mx100.

Bonus: drop @!LINUX_5_4 from kmod-meraki-mx100
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-27 15:39:27 +02:00
Daniel Golle
1562e430d4
generic: 5.15: add more missing Kconfig symbols
Add a bunch of missing new Kconfig symbols to generic/config-5.15.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-27 12:31:26 +01:00
Felix Fietkau
ade563ba84 mediatek: add patches for 5.15 and kernel config for mt7622
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-27 12:55:53 +02:00
Felix Fietkau
a92db8abe0 kernel: add missing config symbols for 5.15
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-27 12:55:48 +02:00
Felix Fietkau
0f029b3d2b mediatek: add patches for MT7622 WED (wireless ethernet dispatch)
This series also contains other improvement for hardware flow offload support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-27 12:54:38 +02:00
Ansuel Smith
009f8afe06 generic: 5.15: refresh pending patch
Use 'make target/linux/refresh' to refresh pending patches.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 05:00:50 +01:00
Ansuel Smith
49cb5e501a generic: 5.15: refresh hack patch
Use 'make target/linux/refresh' to refresh hack patches.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 05:00:50 +01:00
Ansuel Smith
39a7c8d809 generic: 5.15: refresh backport patch
Use 'make target/linux/refresh' to refresh backport patches.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 04:51:38 +01:00
Ansuel Smith
49d9d2b210 generic: fix compilation warning for ar8xxx swconfig
There are 2 warning for ar8xxx swconfig.
- Fix not used dev variable when ETHERNET_PACKET_MANGLE
  is not selected
- Convert fallthrough comment to compilation macro

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 04:51:38 +01:00
Ansuel Smith
327b6dbd98 generic: 5.15: backport mdio improvement patch for qca8k
Backport qca8k mdio improvement patch merged upstream,
where we use eth packet when available to send mdio commands.

This should improve speed and cause less load on the CPU.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 04:51:38 +01:00
Daniel Golle
30a5e07390 generic: 5.15: get uImage.FIT partition parser ready
Prepare uImage.FIT partition parser for Linux 5.15

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 04:51:31 +01:00
Robert Marko
71efd34700 generic: 5.15: fix AQR 113C and 813
Patches that add the additional AQR PHY ID-s is just copy/paste from 5.10
and kernel 5.11 dropped the ack_interrupt method for PHY IRQ handling,
instead handle_interrupt is used.

So, simply switch to using handle_interrupt like other upstream AQR PHY-s.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 02:17:24 +01:00
Robert Marko
81fdb6afe3 generic: 5.15: fix new AQR PHY patches
After fixing the original 720 patch, it looks like more were added for
additional AQR ID-s.

Patches that add the additional AQR PHY ID-s is just copy/paste from 5.10
and kernel 5.11 dropped the ack_interrupt method for PHY IRQ handling,
instead handle_interrupt is used.

So, simply switch to using handle_interrupt like other upstream AQR PHY-s.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2022-03-27 02:17:24 +01:00
Ansuel Smith
ec818e5d29 generic: 5.15: backport mirror mode and LAG feature for qca8k
Backport LAG and mirror mode feature for qca8k.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 02:17:24 +01:00
Ansuel Smith
07b92c636a generic: 5.15: refresh config
Refresh kernel 5.15 generic config file

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[added some missing Kconfig symbols]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-27 02:17:24 +01:00
Ansuel Smith
7aa0f9365c generic: 5.15: fix affinity warning for qcom target
Backport a patch from 5.18 that fix affinity warning from qcom pinctrl driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:35 +00:00
Ansuel Smith
92fb51bc98 generic: 5.15: standardize tcp_no_window_check pending patch
Standardize pending patch tcp_no_window_check patch as with
new kernel they added a check for global variables.
The 2 new condition are that they must be read-only or
the data pointer should not point to kernel/module global
data.
Remove the global variable and move it to a standard place
following other variables logic.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:34 +00:00
Ansuel Smith
483503603c generic: 5.15: rework pending patch
Rework pending patch for kernel 5.15

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:34 +00:00
Ansuel Smith
1f302afd73 generic: 5.15: rework hack patch
Rework hack patch in dir for kernel 5.15.
For the specific patch of packet mangeling introduce a new extra_priv_flags
as we don't have enough space to add additional flags in priv_flags.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:34 +00:00
Ansuel Smith
7829ae4a2f generic: 5.15: qca8k: refresh backport patches
Refresh qca8k backport patches for 5.15 kernel.
Vlan_prepare is now dropped and there were some changes
to vlan add/remove functions.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:34 +00:00
Ansuel Smith
fc8778981f generic: 5.15: rework backport patch
Rework backport patch for kernel 5.15.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:34 +00:00
Ansuel Smith
79dfa44733 generic: 5.15: drop upstream patch
Drop upstream patch from backport dir for kernel 5.15

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:34 +00:00
Ansuel Smith
9a038e7fd1 generic: 5.15: copy config and patch from 5.10
Copy config and patches from kernel 5.10 to kernel 5.15

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2022-03-27 00:07:34 +00:00
Daniel Golle
13960fb0e0
generic: sync mtd rootfs hack with part_bits
In commit ab143647ef ("kernel: generic: improve FIT partition parser")
part_bits was bumped to 2 in order to allow up to 3 additional FIT
sub-images mapped into sub-partitions.
This change has to be reflected also in our local patch
420-mtd-set-rootfs-to-be-root-dev.patch
which still assumed part_bits==1 for mtdblock devices in case of
CONFIG_FIT_PARTITION=y.

Fixes: #9557
Fixes: ab143647ef ("kernel: generic: improve FIT partition parser")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-26 22:55:13 +00:00
Rui Salvaterra
2c26eb4e48
kernel: bump 5.10 to 5.10.108
Patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
Tested-by: John Audia <graysky@archlinux.us>

Build-tested: ath79/generic, ramips/mt76{20,21,x8}, ipq40xx, mvebu, realtek/rtl{838,930}x, x86/64
Run-tested: ramips/mt7621, mvebu
Tested-by: Stijn Segers <foss@volatilesystems.org>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-03-26 18:14:39 +00:00
Raylynn Knight
c7bcbcd492 x86: Add support for Sophos XG 85 and XG 86 devices
This commit builds on previous efforts to add support
for Sophos devices.

* Add support for Sophos XG 85 with/without wireless
* Add support for Sophos XG 86 with/without wireless

Tested on Sophos XG 85w rev1 and XG 86 rev 1

Signed-off-by: Raylynn Knight <rayknight@me.com>
2022-03-26 02:02:45 +01:00
Christian Lamparter
de4879c1ae kernel: mark CONFIG_PSTORE_COMPRESS_DEFAULT as "is not set"
# CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
this can lead to confusion. Thankfully, in the KConfig
world this setting is still interpreted as disabled.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-26 02:02:45 +01:00
Shiji Yang
2e6d19ee32 ramips: fix wifi mac address of HiWiFi series devices
For HiWiFi series devices, label_mac can be read from bdinfo partition,
and lan_mac, wlan2g_mac are same as the label_mac. Converting label_mac
to wlan5g_mac only needs to unset 6th bit. (It seems that all HiWiFi's
label_mac start with D4:EE)

For example:
label	D4:EE:07:32:84:88
lan	D4:EE:07:32:84:88
wan	D4:EE:07:32:84:89
wlan2g	D4:EE:07:32:84:88
wlan5g	D0:EE:07:32:84:88

Tested on HiWiFi HC5661.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2022-03-26 02:02:44 +01:00
Christian Lamparter
6387715093 kernel: add (disabled) ASYMMETRIC_TPM_KEY_SUBTYPE symbol
at91/sama7 fails to build due to:

| Asymmetric (public-key cryptographic) key type (ASYMMETRIC_KEY_TYPE) [Y/?] y
|  Asymmetric public-key crypto algorithm subtype (ASYMMETRIC_PUBLIC_KEY_SUBTYPE) [Y/?] y
|  Asymmetric TPM backed private key subtype (ASYMMETRIC_TPM_KEY_SUBTYPE) [N/m/?] (NEW)
|Error in reading or end of file.

please note that asym_tpm (module) has been removed in 5.17:
<https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d3cff4a9>

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-26 02:02:44 +01:00
Christian Lamparter
026fda10a5 ipq40xx: WAC510: device-tree overhauling
removes usb-port remains as neither the WAC510 nor the WAC505
come with a USB port. Update the LED properties to phase out
labels and introduce generic node-names as well as adding
the color, function and function-enumerator properties.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-26 02:02:44 +01:00
Christian Lamparter
b034a9e569 kernel: add missing (disabled) GOOGLE_* symbols
ARM Builds like sunxi/cortexa53 or the rpi family failed
to build due to a new symbols showing up:

|Google Firmware Drivers (GOOGLE_FIRMWARE) [Y/n/?] y
|  Coreboot Table Access (GOOGLE_COREBOOT_TABLE) [M/n/y/?] m
|  Coreboot Framebuffer (GOOGLE_FRAMEBUFFER_COREBOOT) [N/m/?] (NEW)
|Error in reading or end of file.

Fixes: e5b009e532 ("kernel: Package GOOGLE_FIRMWARE drivers")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-26 02:02:44 +01:00
David Bauer
4551bfd91f ath79: fix link for long cables with OCEDO Raccoon
The OCEDO Raccoon had significant packet-loss with cables longer than 50
meter. Disabling EEE restores normal operation.

Also change the ethernet config to reduce loss on sub-1G links.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-03-25 23:58:09 +01:00
Felix Fietkau
62fd9f9709 kernel: mtdsplit: support UBI after FIT images
Change the partition name accordingly. Same behavior as mtdsplit_uimage

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
2a8a333ee9 kernel: mtk_bmt: add debugfs file to attempt repair of remapped sectors
This can be used for sectors that are not physically damaged

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
06382d1af7 kernel: add support for mediatek NMBM flash mapping support
This NAND flash remapping method is used on newer MediaTek devices with NAND
flash.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
55e8d52157 ramips: skip bbt scan on mt7621
reduces unnecessary flash reads and speeds up boot time

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
4947623d6c ramips: enable support for mtk_bmt in the nand flash driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
73b2a4ca03 ramips: mt7621_nand: initialize ECC_FDMADDR
This is needed for the ECC controller to access FDM data

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Stijn Tintel
89c1959251 ramips: mt7621_nand: reduce log verbosity
Avoid flooding the log with the message below by increasing the log
level to debug:

  mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-03-25 21:11:09 +01:00
Stijn Tintel
2f2e81a4ea ramips: move mt7621_nand driver to files
The patch was rejected by upstream. The mtk_nand driver should be
modified to support the mt7621 flash controller instead. As there is no
newer version to backport, or no upstream version to fix bugs, let's
move the driver to the files dir under the ramips target. This makes it
easier to make changes to the driver while waiting for mt7621 support to
land in mtk_nand.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-03-25 21:11:09 +01:00
Felix Fietkau
be1f2b4d9d kernel: mtk_bmt: on error, do not attempt to remap out-of-range blocks
Pass errors to caller instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
7d1e2be160 kernel: mtk_bmt: fix block copying on remap with bmt v2
Copy from the previously mapped block (in case it was remapped already)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
b4c7f8c5f7 kernel: mtk_bmt: allow get_mapping_block to return an error
Used by the mapping implementation to indicate that no backing block is
available

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
Felix Fietkau
601c7b4adb kernel: split up mtk_bmt driver code
Keep a separate source file per variant

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-25 21:11:09 +01:00
张 鹏
bdc786e82c ipq40xx: update E2600AC c1/c2 board
Modified the radio frequency hardware part of e2600ac c1/c2,
need to cooperate with the modified board.bin file, the device
can work normally.

Signed-off-by: 张 鹏 <sd20@qxwlan.com>
2022-03-25 18:14:13 +01:00
Aleksander Jan Bajkowski
b4970dab6b lantiq: xrx200: replace patch with upstream version
This commit replaces patch number 0703 with the upstream accepted
version. This patch requires backporting an additional patch to
avoid conflicts.

The only significant change is the lower maximum MTU. Packets with
lengths over 2400 may be dropped.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
2022-03-25 18:14:13 +01:00
Aleksander Jan Bajkowski
210c534ce2 kernel: move rtl8152 patches to generic
This commit moves the patches for the r8152.c driver to the generic
directory. Previously they were only available on the bcm27xx target.
With these patches the Realtek RTL8153C, RTL8153D, RTL8156A and RTL8156B
chips are supported on all targets by the kmod-usb-net-rtl8152 module.
The RTL8156A and RTL8156B are the 2.5Gb/s Ethernet adapters.

The patches have been tested on TP-Link UE300 (RTL8153A) and UNITEK
1313B (RTL8156B).

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
2022-03-25 18:14:13 +01:00
Pascal Coudurier
dd45cc2123 kernel: backport two intel igc patches from 5.15
to allow proper initialization of device

- igc: Remove _I_PHY_ID checking
- igc: Remove phy->type checking

Signed-off-by: Pascal Coudurier <coudu@wanadoo.fr>
(refreshed)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-25 18:14:13 +01:00
Chris Blake
3f874519b4 gpio-cdev: re-add nu801 userspace driver
This reverts commit 80b7a8a7f5.

Now that 5.10 is the default kernel for all platforms, we can
bring back the NU801 userspace driver for platforms that rely
on it. Currently it's used on the MX100 x86_64 target, but
other Meraki platforms use this controller.

Note that we also now change how we load nu801. The way we did
this previously with procd worked, but it meant it didn't load
until everything was up and working.

To fix this, let's call nu801 from boot and re-trigger the
preinit blink sequence. Since nu801 runs as a daemon this is
now something we can do.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
(removed empty line, currently only MX100 uses it so: @TARGET_x86)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-25 18:14:13 +01:00
Andre Heider
cb6f4be137 ipq40xx: add support for FRITZ!Box 7520
This model, also know as "1&1 HomeServer", shares the same features as 7530.

The vendor firmware has artificial software limitations: only 2 of the 4
LAN-Ports are GBit, and the USB-Host is only v2.0.

With OpenWrt, USB is already working at v3.0.

Signed-off-by: Andre Heider <a.heider@gmail.com>
(updated commit message to reflect current state)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-25 18:14:13 +01:00
Brian Norris
f1c041e34f ipq40xx: Add subtarget for Google WiFi (Gale)
Google WiFi (codename: Gale) is an IPQ4019-based AP, with 2 Ethernet
ports, 2x2 2.4+5GHz WiFi, 512 MB RAM, 4 GB eMMC, and a USB type C port.
In its stock configuration, it runs a Chromium OS-based system, but you
wouldn't know it, since you can only manage it via a "cloud" +
mobile-app system.

The "v2" label is coded into the bootloader, which prefers the
"google,gale-v2" compatible string. I believe "v1" must have been
pre-release hardware.

Note: this is *not* the Google Nest WiFi, released in 2019.

I include "factory.bin" support, where we generate a GPT-based disk
image with 2 partitions -- a kernel partition (using the custom "Chrome
OS kernel" GUID type) and a root filesystem partition. See below for
flashing instructions.

Sysupgrade is supported via recent emmc_do_upgrade() helper.

This is a subtarget because it enables different features
(FEATURES=boot-part rootfs-part) whose configurations don't make sense
in the "generic" target, and because it builds in a few USB drivers,
which are necessary for installation (installation is performed by
booting from USB storage, and so these drivers cannot be built as
modules, since we need to load modules from USB storage).

Flashing instructions
=====================

Documented here:
https://openwrt.org/inbox/toh/google/google_wifi

Note this requires booting from USB storage.

Features
========

I've tested:

 * Ethernet, both WAN and LAN ports
 * eMMC
 * USB-C (hub, power-delivery, peripherals)
 * LED0 (R/G/B)
 * WiFi (limited testing)
 * SPI flash
 * Serial console: once in developer mode, console can be accessed via
   the USB-C port with SuzyQable, or other similar "Closed Case
   Debugging" tools:
     https://chromium.googlesource.com/chromiumos/third_party/hdctools/+/master/docs/ccd.md#suzyq-suzyqable
 * Sysupgrade

Not tested:

 * TPM

Known not working:

 * Reboot: this requires some additional TrustZone / SCM
   configuration to disable Qualcomm's SDI. I have a proposal upstream,
   and based on IRC chats, this might be acceptable with additional DT
   logic:
     [RFC PATCH] firmware: qcom_scm: disable SDI at boot
     https://lore.kernel.org/linux-arm-msm/20200721080054.2803881-1-computersforpeace@gmail.com/
 * SMP: enabling secondary CPUs doesn't currently work using the stock
   bootloader, as the qcom_scm driver assumes newer features than this
   TrustZone firmware has. I posted notes here:
     [RFC] qcom_scm: IPQ4019 firmware does not support atomic API?
     https://lore.kernel.org/linux-arm-msm/20200913201608.GA3162100@bDebian/
 * There's a single external button, and a few useful internal GPIO
   switches. I haven't hooked them up.

The first two are fixed with subsequent commits.

Additional notes
================

Much of the DTS is pulled from the Chrome OS kernel 3.18 branch, which
the manufacturer image uses.

Note: the manufacturer bootloader knows how to patch in calibration data
via the wifi{0,1} aliases in the DTB, so while these properties aren't
present in the DTS, they are available at runtime:

  # ls -l
/sys/firmware/devicetree/base/soc/wifi@a*/qcom,ath10k-pre-calibration-data
  -r--r--r--    1 root     root         12064 Jul 15 19:11 /sys/firmware/devicetree/base/soc/wifi@a000000/qcom,ath10k-pre-calibration-data
  -r--r--r--    1 root     root         12064 Jul 15 19:11 /sys/firmware/devicetree/base/soc/wifi@a800000/qcom,ath10k-pre-calibration-data

Ethernet MAC addresses are similarly patched in via the ethernet{0,1} aliases.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
(updated 901 - x1pro moved in the process)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-25 18:14:13 +01:00
Brian Norris
26af098e0e ipq40xx: qcom_scm: Fix cold boot address command
See my upstream questions:
https://lore.kernel.org/linux-arm-msm/20200913201608.GA3162100@bDebian/

This effectively reverts upstream Linux commit 13e77747800e ("firmware:
qcom: scm: Use atomic SCM for cold boot"), because Google WiFi boot
firmwares don't support the atomic variant.

This fixes SMP support for Google WiFi.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2022-03-25 18:14:13 +01:00
Brian Norris
a93ec36630 ipq40xx: qcom_scm: Disable SDI at boot
See my upstream RFC of this:
https://lore.kernel.org/linux-arm-msm/20200721080054.2803881-1-computersforpeace@gmail.com/

This fixes warm boot (reboot) for Google WiFi devices using their
factory bootloader/firmware.

I may resend this upstream eventually.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2022-03-25 18:14:13 +01:00
Brian Norris
17b05045bd ipq40xx: Support Chromium OS image-type creation
See firmware-utils.git commits [1], which implemented the cros-vbutil
verified-boot payload-packing tool, and extended ptgen for the CrOS
kernel partition type. With these, it's now possible to package kernel +
rootfs to make disk images that can boot a Chrome OS-based system (e.g.,
Chromebooks, or even a few AP models).

Regarding PARTUUID= changes: Chromium bootloaders work well with a
partition number offset (i.e., relative to the kernel partition), so
we'll be using a slightly different root UUID line.

NB: I've made this support specific to ip40xx for now, because I only
plan to support an IPQ4019-based AP that uses a Chromium-based
bootloader, but this image format can be used for essentially any
Chromebook, as well as the Google OnHub, a prior Chromium-based AP using
an IPQ8064 chipset.

[1]
ptgen: add Chromium OS kernel partition support
https://git.openwrt.org/?p=project/firmware-utils.git;a=commit;h=6c95945b5de973026dc6f52eb088d0943efa96bb

cros-vbutil: add Chrome OS vboot kernel-signing utility
https://git.openwrt.org/?p=project/firmware-utils.git;a=commit;h=8e7274e02fdc6f2cb61b415d6e5b2e1c7e977aa1

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2022-03-25 18:14:13 +01:00
Christian Lamparter
e95dec8116 apm821xx: fix crash/panic related to SATA/SSD choice
Ticerex on the OpenWrt Forum reported a gnarly crash when
he was using Samsung 840 and 850 EVOs with his MyBook Live:

| BUG: Kernel NULL pointer dereference at 0x00000000
| Faulting instruction address: 0xc03ed4b8
| Oops: Kernel access of bad area, sig: 11 [#1]
| BE PAGE_SIZE=4K PowerPC 44x Platform
| CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0
| NIP:  c03ed4b8 LR: c03d27e8 CTR: c03ed36c
| REGS: cfa59950 TRAP: 0300   Not tainted  (5.4.163)
| MSR:  00021000 <CE,ME>  CR: 42000222  XER: 00000000
| DEAR: 00000000 ESR: 00000000
| GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...]
| [..]
| NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254
| LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| Call Trace:
| [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable)
| [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524
| [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0
| [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204
| [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130
| [...]

This turned out this is an issue with upstream changing
ATA_TAG_INTERNAL's value from 31 to 32 during 4.18 release.
Update "SATA_DWC_QCMD_MAX" to account for that.

Link: https://forum.openwrt.org/t/my-book-live-duo-reboot-loop/122464
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-25 18:14:13 +01:00
Christian Lamparter
4ce52de450 ipq40xx: disable non-building tel(co Electronics) x1pro
Tel(co Electronics) X1 Pro is preventing ipq40xx generic
from building due to the KERNEL_SIZE.

Whenever bigger kernels are possible, if lzma is supported
is unknown.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-25 18:14:13 +01:00
Matthias Schiffer
8ba71f1f6f
ath79: fix TPLINK_HWREV field for TL-WR1043ND v4
Required to allow sysupgrades from OpenWrt 19.07.

Closes #7071

Fixes: 98fbf2edc0 ("ath79: move TPLINK_HWID/_HWREV to parent for tplink-safeloader")
Tested-by: J. Burfeind <git@aiyionpri.me>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-25 18:13:11 +01:00
Petr Štetiar
621f39d1f4 imagebuilder: fix broken image generation with external targets
When using external targets there is a symlink being created for the
target under target/linux which then becomes dangling under Image
Builder. Fix it by dereferencing the possible symlink.

Tested on IB with external target, ipq40xx and mvebu.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-25 14:28:00 +01:00