ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 15:56:49 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
44,662 Commits 9 Branches 76 Tags 920 MiB
a7e68927d0
Commit Graph

303 Commits

Author SHA1 Message Date
Hauke Mehrtens
0b17375931 kernel: update kernel 4.9 to 4.9.30 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2017-05-27 00:48:37 +02:00
Stijn Tintel
c454fab0f2 brcm2708: enable cpufreq 
With cpufreq disabled, the CPU stays locked at the frequency set by the
bootloader. This severely degrades performance as the bootloader sets
the CPU at the lowest frequency by default.

Enable cpufreq for all subtargets and use the ondemand governor.

Tested bcm2708 on RPi0W. Tested bcm2709 and bcm2710 on RPi3.

Reported-by: Bryan Mayland <bmayland@capnbry.net>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 2017-05-23 17:32:49 +02:00
Koen Vandeputte
e842e16f45 kernel: update kernel 4.9 to 4.9.29 
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2017-05-21 21:51:22 +02:00
Rafał Miłecki
da529d5410 brcm2708: disable CONFIG_BCM2835_THERMAL by default 
This fixes:
  Thermal sensors on bcm2835 SoC (BCM2835_THERMAL) [N/m/y/?] (NEW) aborted!

This symbol depends on ARCH_BCM2835 so it should be OK to disable it at
brcm2708 target only.

Fixes: 7d32caa61fb0 ("brcm2708: backport upstream sdhost controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2017-04-15 08:24:42 +02:00
Hauke Mehrtens
b26e34214c kernel: update kernel 4.9 to 4.9.20 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2017-04-02 12:47:55 +02:00
Hauke Mehrtens
fb7ea71c15 kernel: update kernel 4.9 to 4.9.17 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2017-03-26 12:23:19 +02:00
Rafał Miłecki
313197d707 brcm2708: backport upstream ARM dts commits 
This gets us in sync with dts from kernel 4.11. Two patches were already
backported earlier.
I decided to use 03x prefix as it's kind of similar to the 3xx prefix:
3xx - architecture specific patches
It isn't any documented or strict rule though. We don't need to stick to
it if we hit any problems.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-03-24 19:52:00 +01:00
Rafał Miłecki
fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix 
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
 2017-03-24 08:06:35 +01:00
Rafał Miłecki
fbf89732c4 brcm2708: add kmod-drm-vc4 package 
It includes vc4 driver for Broadcom VideoCore IV GPU.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2017-03-21 23:44:24 +01:00
Stijn Tintel
4124847772 brcm2708: detect Raspberry Pi Zero W 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 2017-03-08 09:03:39 +01:00
Stijn Tintel
a8c2a719fa brcm2708: order boards and models alphabetically 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 2017-03-08 09:03:27 +01:00
Álvaro Fernández Rojas
6debeaab45 brcm2708: add support for the new Raspberry Pi Zero W 
Support is experimental since I haven't got any device to test.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-03-04 19:41:34 +01:00
Álvaro Fernández Rojas
baad22eed3 brcm2708: update linux 4.9 patches to latest version 
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.9.y

- Remove led1 from diag.sh for RPi3 since it causes boot issues.
- Fix modules.mk typos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-03-04 19:37:50 +01:00
Felix Fietkau
9467ce42da build: get rid of host.mk 
Defined required host related variables in toplevel.mk instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2017-02-26 13:31:44 +01:00
Hauke Mehrtens
236840eb47 kernel: update kernel 4.9 to version 4.9.10 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2017-02-16 00:46:23 +01:00
Álvaro Fernández Rojas
48b71a0b07 brcm2708: bcm2708: fix build 
buildbot fails to build without regmap, which I couldn't reproduce locally.
Hopefully this fixes it.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-08 17:43:40 +01:00
Álvaro Fernández Rojas
ba9dbc3dd5 brcm2708: add more patches for linux 4.9 
Also removes unneeded wireless patches

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-08 09:59:53 +01:00
Álvaro Fernández Rojas
7ef713c9c4 brcm2708: bcm2710: add 64 bit support for Raspberry Pi 3 
64 bit support for Raspberry Pi 3 is experimental. However, bcm2709 subtarget
should serve as a stable and compatible 32 bit support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-08 00:41:51 +01:00
Álvaro Fernández Rojas
77a00027c3 brcm2708: bcm2709: add support for Raspberry Pi 3 
This adds support for Raspberry Pi 3 on the bcm2709 subtarget, in order to
keep 32 bit image support when 64 bit support is added on bcm2710 subtarget.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-08 00:41:48 +01:00
Álvaro Fernández Rojas
e9e52761d3 brcm2708: remove duplicated gzip from image generation 
Images are now automatically gziped so remove custom image command

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-07 23:00:24 +01:00
Álvaro Fernández Rojas
d9d090e520 brcm2708: remove linux 4.4 support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-07 23:00:21 +01:00
Álvaro Fernández Rojas
ada91d8a24 brcm2708: switch to linux 4.9 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-07 23:00:18 +01:00
Álvaro Fernández Rojas
96aa0c6b0b brcm2708: add linux 4.9 support 
Patches from Raspberry Pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.9.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-07 23:00:16 +01:00
Álvaro Fernández Rojas
dab5a44067 brcm2708: update linux 4.4 patches to latest version 
n
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-02-06 22:24:42 +01:00
Stijn Segers
20996edd68 Kernel: bump to 4.4.44 
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
 2017-01-27 11:18:27 +01:00
Hauke Mehrtens
5b089e45a6 kernel: update 4.4 kernel to 4.4.42 
Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2017-01-13 23:05:36 +01:00
Felix Fietkau
01d9527357 kernel: remove DEVTMPFS platform overrides 
Those options are handled via top-level menuconfig instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2017-01-10 13:48:53 +01:00
Hauke Mehrtens
88ca6390ea kernel: bump to 4.4.40 
Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2017-01-06 19:38:55 +01:00
John Crispin
c21af889bb brcm2708: unbreak the spidev build 
a generic patch made this patch fail to apply cleanly leading to aborted builds

Signed-off-by: John Crispin <john@phrozen.org>
 2016-12-20 13:47:57 +01:00
Álvaro Fernández Rojas
011f2c26f1 brcm2708: update linux 4.4 patches to latest version 
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-12-04 12:32:04 +01:00
Stijn Tintel
8e47655d4e kernel: update kernel 4.4 to version 4.4.32 
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 2016-11-16 17:31:29 +01:00
Paul Wassi
a569354481 kernel: update kernel 4.4 to version 4.4.28 
Refresh patches for all targets that support kernel 4.4.
compile/run-tested on ar71xx, brcm47xx, kirkwood.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
 2016-10-31 16:33:53 +01:00
Rafał Miłecki
d0b50c2770 kernel: drop usbdev LED trigger 
It was LEDE's trigger that was replaced by upstream usbport one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2016-10-19 12:09:45 +02:00
Álvaro Fernández Rojas
611399f1f8 brcm2708: fix image generation with imagebuilder 
COPYING is not present in $(LINUX_DIR) on imagebuilder and prevents a
successful image creation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-10-13 19:01:41 +02:00
Stijn Segers
949cfbb243 kernel: update kernel 4.4 to version 4.4.22 
Forgot to update kernel-version.mk, so updated patch. Compile-tested on x86/64 and ar71xx; run-tested on x86/64 and ar71xx.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
 2016-09-30 13:34:04 +02:00
Álvaro Fernández Rojas
c3d3111831 brcmfmac43430-firmware: remove package and switch to linux-firmware 
Now that the firmware for BCM43430 has been submitted to linux-firmware use it
and remove RPiDistro package.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-09-29 21:24:45 +02:00
Álvaro Fernández Rojas
ba5a9aba5c brcmfmac43430-firmware: rename to brcmfmac-firmware-43430-sdio 
This is consistent with the rest of brcmfmac firmwares.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-09-15 20:23:46 +02:00
Álvaro Fernández Rojas
d14c28fc80 kernel: update kernel 4.4 to version 4.4.20 
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-09-15 08:10:55 +02:00
Álvaro Fernández Rojas
2b1c6b21b5 brcm2708: update linux 4.4 patches to latest version 
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-09-10 14:54:26 +02:00
Felix Fietkau
aa53f78038 build: fix subtarget descriptions 
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-09-04 13:35:11 +02:00
Stijn Tintel
8072264b96 kernel: update kernel 4.4 to version 4.4.19 
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 2016-08-23 10:51:17 +03:00
Felix Fietkau
63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-07-31 12:25:25 +02:00
Felix Fietkau
8e2764ce9b image.mk: clean up redundant code related to DEVICE_DTS 
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-07-15 14:14:11 +02:00
Hauke Mehrtens
efa1960abb kernel: update kernel 4.4 to version 4.4.15 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2016-07-13 15:39:15 +02:00
Álvaro Fernández Rojas
20402106a3 brcm2708: update linux 4.4 patches to latest version 
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-07-09 16:29:18 +02:00
Hauke Mehrtens
84d489f64f kernel: update to version 4.4.14 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14

Some manual changes to target/linux/generic/patches-4.4/610-
netfilter_match_bypass_default_checks.patch were needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2016-06-26 18:20:37 +02:00
Álvaro Fernández Rojas
63cb2fb88d brcm2708: properly detect the Raspberry Pi Zero 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-21 20:17:38 +02:00
Álvaro Fernández Rojas
0aa6c7df60 kernel: update kernel 4.4 to version 4.4.13 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-12 15:51:54 +02:00
Álvaro Fernández Rojas
0691a172d0 brcm2708: fix another missing kmod dependency 
kmod-sound-soc-digidac1-soundcard is also missing snd-soc-wm8804 dependency
for snd-soc-wm8804-i2c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-09 00:14:26 +02:00
Álvaro Fernández Rojas
09f0850ba8 brcm2708: fix missing dependency found by buildbot 
Add missing dependency to kmod-sound-soc-adau1977-adc.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-09 00:08:20 +02:00
Álvaro Fernández Rojas
3fc661a98c brcm2708: update linux 4.4 patches to latest version 
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Also alphabetically order sound-soc kernel packages.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-08 21:23:21 +02:00
Álvaro Fernández Rojas
ece009dbf1 brcm2708: take over maintainership 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-08 19:08:02 +02:00
Álvaro Fernández Rojas
a105eac4dd kernel: update kernel 4.4 to version 4.4.12 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-02 15:34:34 +02:00
Álvaro Fernández Rojas
65ae9db41a brcm2708: fix build error introduced in 2b4e5d47 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-06-01 17:11:04 +02:00
Álvaro Fernández Rojas
8998dc14a5 brcm2708: fix SUBTARGET checks for bcm2709/bcm2710 
This regression was introduced in commit cf58007a

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-05-20 19:07:36 +02:00
Felix Fietkau
cf58007abc bcm2708: explicitly check for SUBTARGET instead of using the device SUBTARGETS variable 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-05-20 14:37:52 +02:00
Álvaro Fernández Rojas
c4664b0f91 kernel: update kernel 4.4 to version 4.4.11 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-05-19 21:08:06 +02:00
Álvaro Fernández Rojas
424a94d81a brcm2708: convert to the new building system 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-05-14 13:25:08 +02:00
Álvaro Fernández Rojas
b062266ad6 kernel: update kernel 4.4 to version 4.4.9 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-05-10 10:43:17 +02:00
Álvaro Fernández Rojas
7df1964180 brcm2708: removes backported patch (linux-4.4.7) 
This regression was introduced while rebasing LEDE's commits over the latest
OpenWrt repository.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-04-26 16:41:41 +02:00
Álvaro Fernández Rojas
525b311bf8 brcm2708: update linux 4.4 patches to latest version 
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-04-24 13:03:39 +02:00
Álvaro Fernández Rojas
3faf65e928 kernel: update kernel 4.4 to version 4.4.8 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-04-24 11:32:17 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable 
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
 2016-04-18 21:53:07 +02:00
Christian Lamparter
3339f41d26 brcm2708: implement sysupgrade image check 
Implement a crude but functioning sysupgrade image check for the
Raspberry Pi. The code only checks if the master boot record boot
signature (0x55aa) is present in the first 512-bytes at the correct
location. This can prevent the odd bricking of a system when flashing
the wrong file.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
 2016-04-07 18:26:51 +02:00
Álvaro Fernández Rojas
e821fdbadb brcm2708: add missing config symbols 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-04-16 11:23:56 +02:00
Álvaro Fernández Rojas
a8d4d71c41 brcm2708: update to latest version 
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-04-07 21:25:10 +02:00
Álvaro Fernández Rojas
f233664faa brcm2708-gpu-fw: update to latest version 
This update also adds individual download of firmware files instead of fetching
every file on the repository (10-MiB vs 100+MiB).
Also copy Linux license from kernel directory instead of using the rpi-firmware
one.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-04-01 13:37:33 +02:00
Hauke Mehrtens
f0b3964f1b kernel: update kernel 4.4 to version 4.4.7 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49176
 2016-04-16 21:05:48 +00:00
John Crispin
12334f58fe brcm2708: add brcmfmac43430-firmware-sdio for Rasberry Pi 3 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 49103
 2016-04-01 07:11:43 +00:00
John Crispin
553c1b793f brcmfmac: Add Raspberry Pi 3 support 
- Enable SDIO support on brcmfmac.
- Disable power managment for brcm2708 target.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49023
 2016-03-16 09:26:42 +00:00
John Crispin
f78f271c1e brcm2708: update patches to latest version 
As usual these patches were extracted from the raspberry repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

- Disable unused MFD RPISENSE driver.
- Disable ethernet HW checksums in order to avoid kernel exceptions.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48985
 2016-03-10 19:11:23 +00:00
John Crispin
993989880a brcm2708: add Raspberry Pi 3 support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48967
 2016-03-08 18:11:55 +00:00
John Crispin
cd2114e19c brcm2708: update linux 4.4 patches to latest version 
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48966
 2016-03-08 18:11:49 +00:00
Hauke Mehrtens
e9d7ee4f41 kernel: update kernel 4.4 to version 4.4.4 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48933
 2016-03-05 17:51:37 +00:00
Hauke Mehrtens
cb04b8d582 kernel: update kernel 4.4 to version 4.4.3 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
 2016-02-25 21:54:39 +00:00
John Crispin
0834f9f076 brcm2708: remove linux 4.1 support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766
 2016-02-25 10:14:05 +00:00
John Crispin
b3dc9566a4 brcm2708: switch to linux 4.4 and update patches 
As usual these patches were extracted from:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48765
 2016-02-25 10:14:01 +00:00
John Crispin
e68281e613 brcm2708: add missing symbols 
enable CONFIG_PWM
enable the RASPI PWM stuff
fix buildbot w. 4.1

compile tested only

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 48667
 2016-02-08 09:22:56 +00:00
Hauke Mehrtens
4807ca67d6 kernel: update kernel 4.1 to version 4.1.16 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48497
 2016-01-25 21:44:12 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
 2016-01-25 16:30:41 +00:00
Felix Fietkau
edb3c1780c brcm2708: fix RPi model B plus support 
Not sure if B+ is used or not (mine has B Plus) so leave both

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48311
 2016-01-18 12:42:03 +00:00
Felix Fietkau
4224b52c3a brcm2708: add linux 4.4 support 
- random-bcm2708 and spi-bcm2708 have been removed.
- sound-soc-bcm2708-i2s has been upstreamed as sound-soc-bcm2835-i2s.

Let's keep linux 4.1 for a while, since linux 4.4 appears to have some issues
with multicast traffic on RPi ethernet:
https://gist.github.com/Noltari/5b1cfdecce5ed4bc08fd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48266
 2016-01-17 10:42:23 +00:00
Felix Fietkau
3348279eca kernel: disable bogus DEVTMPFS config overrides 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48260
 2016-01-17 10:40:36 +00:00
John Crispin
d4b8d51580 brcm2708: update 4.1 patches 
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47922
 2015-12-17 09:29:22 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh 
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
 2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
 2015-12-03 23:13:00 +00:00
Hauke Mehrtens
f0a5f24217 kernel: update 4.1 to 4.1.13 
- two upstreamed patches removed
- compile tested all targets using 4.1
- run tested ar71xx

Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47694
 2015-12-02 21:52:41 +00:00
John Crispin
c7bcdac82e brcm2708: fix multi-device image generation 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47610
 2015-11-24 18:27:43 +00:00
John Crispin
cd9d0ee0d0 brcm2708: add device detection and use it for network, leds and preinit 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47572
 2015-11-22 08:04:37 +00:00
John Crispin
1f51472346 brcm2708: enable hard float ABI 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47562
 2015-11-21 21:25:13 +00:00
John Crispin
31f9aec7d6 brcm2708: add support for multi-device images 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47561
 2015-11-21 21:25:04 +00:00
John Crispin
a429d6998e brcm2708: rename image device definition 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47560
 2015-11-21 21:24:57 +00:00
John Crispin
edff980107 brcm2708: revert sd image extension to .img 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47559
 2015-11-21 21:24:50 +00:00
John Crispin
223d88f843 brcm2708: simplify gzip image generation 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47558
 2015-11-21 21:24:44 +00:00
John Crispin
f080f2aa8e brcm2708: copy overlays README to boot partition 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47260
 2015-10-26 09:01:21 +00:00
John Crispin
71ca5b1cc5 brcm2708: update modules 
- Add support for DAC+ Pro.
- Add kmod-smi-bcm2835 and kmod-smi-bcm2835-dev modules.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47259
 2015-10-26 09:01:12 +00:00
John Crispin
bf28fb50bf brcm2708: update 4.1 patches 
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47258
 2015-10-26 09:01:05 +00:00
Hauke Mehrtens
da94b00df5 kernel: update kernel 4.1 to version 4.1.11 
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47252
 2015-10-25 17:32:01 +00:00
John Crispin
4412334bea brcm2708: use mmd for overlays subdirectory 
Fixes https://dev.openwrt.org/ticket/20704

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47171
 2015-10-11 16:23:18 +00:00
John Crispin
0be23c40f3 brcm2708: all sound overlays require i2c to work 
Tested on RPi B+ with HiFiBerry Amp+

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47169
 2015-10-11 16:23:01 +00:00
John Crispin
7ce3e1fd3c brcm2708: keep boot partition mounted to allow users to change config.txt 
This way it's easier to configure device tree overlays, customize other
parameters...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47126
 2015-10-05 10:27:49 +00:00
John Crispin
d1fc19265a brcm2708: add support for device tree overlays 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47125
 2015-10-05 10:27:41 +00:00
John Crispin
b97498ab29 brcm2708: switch device tree compilation to linux 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47124
 2015-10-05 10:27:34 +00:00
John Crispin
a32acfe73c brcm2708: fix kmod-sound-soc-bcm2708-i2s config 
Right now, selecting kmod-sound-soc-bcm2708-i2s causes build errors due to
missing configs.
kmod-regmap enables I2C and SPI, causing build errors due to depending
variables not defined.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47123
 2015-10-05 10:27:18 +00:00
Hauke Mehrtens
0cd478518f kernel: update 4.1 to 4.1.10 
Fixes a regression on spi flash devices (upstream commit 1583eaece6fa).

Changelogs:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10

096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied
upstream and dropped.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[update from 4.1.9 to 4.1.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47104
 2015-10-04 11:34:39 +00:00
Felix Fietkau
e1f0a7e841 brcm2708: remove linux 3.18 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46870
 2015-09-11 17:17:30 +00:00
Felix Fietkau
b1be597a7a brcm2708: add kmod-sound-soc-raspidac3 
This adds support for RaspiDAC Rev.3x

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46854
 2015-09-11 16:32:15 +00:00
Felix Fietkau
0b5d87fd30 brcm2708: update 4.1 patches 
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46853
 2015-09-11 16:32:00 +00:00
Jonas Gorski
7d6cff4882 kernel: update 3.18 to 3.18.21 
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768
 2015-09-02 10:18:15 +00:00
John Crispin
27a40c79b0 brcm2708: override disabled device tree module status from config.txt 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46642
 2015-08-17 06:04:48 +00:00
John Crispin
a6e47b8324 brcm2708: fix kmod-sound-soc-iqaudio-dac and add missing symbol 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46641
 2015-08-17 06:04:39 +00:00
John Crispin
22b3e521b5 brcm2708: update 4.1 patches 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46640
 2015-08-17 06:04:32 +00:00
John Crispin
98e122e4cc brcm2708: use BuildDTB in image/Makefile 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46639
 2015-08-17 06:04:18 +00:00
Jonas Gorski
8e69c9f7ef image.mk: store the device name variable 
Make the device name accessible for any build commands instead of
forcing targets to define it themselves.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46597
 2015-08-14 13:05:22 +00:00
Jonas Gorski
caa73eb95c kernel: update 4.1 to 4.1.4 
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46560
 2015-08-05 13:55:14 +00:00
John Crispin
0afb8e8ac2 brcm2708: add kmod-sound-soc-bcm2708-i2s support 
This adds support for I2S SoC Audio modules.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46461
 2015-07-24 09:10:14 +00:00
John Crispin
2eab9e03cc brcm2708: add kmod-video-bcm2835 support 
This adds BCM2835 camera interface driver as a kernel module.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46460
 2015-07-24 09:10:05 +00:00
Jonas Gorski
cc42b1049b kernel: refresh patches for 4.1 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46441
 2015-07-22 12:51:11 +00:00
John Crispin
84b89e4ec4 brcm2708: add gzip image compression 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46404
 2015-07-17 12:50:52 +00:00
John Crispin
08a416e3b9 brcm2708: add Raspberry Pi Compute Module support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46403
 2015-07-17 12:49:27 +00:00
John Crispin
f7ac790356 brcm2708: switch to linux 4.1 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46402
 2015-07-17 12:49:09 +00:00
John Crispin
b19a645b40 brcm2708: add upstream (bcm2835) modules and improve downstream ones (bcm2708) 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46401
 2015-07-17 12:48:59 +00:00
John Crispin
208ab54e3e brcm2708: add linux 4.1 support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46399
 2015-07-17 12:48:39 +00:00
John Crispin
03b56c9350 brcm2708: split target config into subtargets 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46398
 2015-07-17 12:48:11 +00:00
John Crispin
623da91e4d brcm2708: remove unneeded base-files 
Device tree exports board name/model and device LEDs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46397
 2015-07-17 12:48:02 +00:00
John Crispin
8ef50ec40b brcm2708: improve profiles and image generation 
- Add profiles for bcm2708 subtarget.
- Check subtarget for image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46396
 2015-07-17 12:47:50 +00:00
John Crispin
94ef06a8c2 brcm2708: partially revert r46347 to fix sysupgrade 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46367
 2015-07-14 16:24:10 +00:00
John Crispin
2de7910102 brcm2708: Implement sysupgrade 
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.

Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 46347
 2015-07-14 07:39:10 +00:00
John Crispin
c40f94b0d0 brcm2708: add DT support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46344
 2015-07-14 07:37:29 +00:00
Hauke Mehrtens
29039f51b3 kernel: refresh patches on linux 3.18 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46308
 2015-07-12 13:47:16 +00:00
Jonas Gorski
901a7fa067 kernel: update 3.18 to 3.18.17 
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46150
 2015-06-30 23:26:09 +00:00
John Crispin
a5a935b49a brcm2708: fix imagebuilder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45824
 2015-05-29 11:28:54 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
 2015-05-21 19:32:46 +00:00
Felix Fietkau
7d6eec16b6 brcm2708: remove a patch that was added in the stable update (fixes #19253) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44920
 2015-03-21 21:24:08 +00:00
Felix Fietkau
17fdf5fb85 brcm2708: fix mkdosfs command line options order 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44764
 2015-03-15 05:18:50 +00:00
John Crispin
fa097e5ae5 kernel: disbale HAMRADIO in generic config 
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.

So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44613
 2015-03-06 07:56:21 +00:00
John Crispin
a29bd8bdbf brcm2708: add another missing symbol 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44601
 2015-03-05 20:24:39 +00:00
John Crispin
af3b4077bd brcm2708: add kmod-hwmon-bcm2835 support and more missing symbols 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44449
 2015-02-14 20:48:20 +00:00
John Crispin
9270474941 brcm2708: force uart as the default console for procd and remove nonexistent console 
procd gets last console from cmdline, so swapping tty1 (framebuffer) and ttyAMA0 (uart) is enough to force procd output via uart

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44448
 2015-02-14 20:48:14 +00:00
John Crispin
dc72499b53 brcm2708: add board detection and LED support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44447
 2015-02-14 20:48:08 +00:00
John Crispin
0d36998795 brcm2708: fix spidev 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44434
 2015-02-13 07:38:33 +00:00
John Crispin
9b74de00f7 brcm2708: refresh patches 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44433
 2015-02-13 07:38:27 +00:00
John Crispin
2dbcf5e91f brcm2708: add missing config symbols and fix kernel modules for Raspberry Pi 2 by removing local version 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44432
 2015-02-13 07:38:00 +00:00
John Crispin
fae2ec33d1 brcm2708: add subtarget copyright and use better board names 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44431
 2015-02-13 07:37:55 +00:00
John Crispin
eaec1e41b1 brcm2708: add missing SUBTARGETS:= to makefile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44405
 2015-02-11 13:09:39 +00:00
John Crispin
b67a6f65d6 brcm2708: remove CMA_DEBUG 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44404
 2015-02-11 13:05:37 +00:00
John Crispin
cafc77f74c brcm2708: add Raspberry Pi 2 support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44403
 2015-02-11 13:05:31 +00:00
John Crispin
146c9aff27 brcm2708: remove 3.14 support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44402
 2015-02-11 13:05:23 +00:00
John Crispin
408c969626 brcm2708: update to v3.18 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44392
 2015-02-11 10:17:55 +00:00
John Crispin
5e8bc7088b brcm2708: missing symbols caused a build fail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44011
 2015-01-17 19:10:40 +00:00