Commit Graph

62385 Commits

Author SHA1 Message Date
Markus Stockhausen
a200f0cee7 realtek: dsa: allow USXGMII mode
RTL930x devices need the USXGMII mode. This is a final leftover
from the 6.6 conversion.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16457
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-27 22:26:25 +01:00
Christian Marangi
07159cc25a
Revert "scripts/download.pl: read file natively"
This reverts commit 65560de58d.

Seems to broke CI and require more testing.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-27 15:58:16 +01:00
Daniel Golle
388de64d9f mediatek: mt7988: add DT entries for WED
Add memory regions and devices used for wireless offloading to the
device tree for MT7988.

This allows using WED on devices with MT7988 SoC and MT7995E, MT7996E or
MT7992E wireless controllers.

Devices with 4 GiB of RAM (or more) will still need ajustments to avoid
running out of swiotlb entries.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-27 14:27:20 +00:00
Rosen Penev
0f5e5dee1d ramips: modernize pwm driver
Add more devm usage.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16649
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-27 15:21:03 +01:00
Kevin Zhang
b5c7c67b8f rockchip: Add LED aliases for FriendlyElec NanoPi R3S
This commit adds OpenWRT's LED aliases to the board DTS
for showing system status on the NanoPi R3S.

Signed-off-by: Kevin Zhang <kevin@kevinzhang.me>
Link: https://github.com/openwrt/openwrt/pull/16738
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-27 14:57:51 +01:00
Kevin Zhang
2902b0a6fb rockchip: Add support for RK3566 FriendlyElec NanoPi R3S
This commit adds support for the FriendlyElec NanoPi R3S.

CPU: Rockchip RK3566, Quad-core Cortex-A55
RAM: 2GB LPDDR4X
Ethernet: GMAC RTL8211F GbE, PCIe R8111H GbE
USB3.0 Host: Type-A x1
Storage: MicroSD Slot x 1, and optional on-board 32GB eMMC
Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds
LED: LED x 3
RTC: One low-power RTC, supports backup battery input

Both GbE controllers are working (WAN eth0, LAN eth1).
Appropriate LAN/WAN interface assignments and MAC address generation.
All three LEDs are working.
USB appears to be working and has been tested with mass storage.

Installation - microSD:

-Uncompress the OpenWRT sysupgrade.img.gz
-Write image to microSD card using dd or similar tool

Installation - eMMC:

-Boot from microSD
-Uncompress the OpenWRT sysupgrade.img.gz
-Flash to eMMC : dd if=x.img of=/dev/mmcblk0
-sync
-Remove microSD card
-Reboot

Signed-off-by: Kevin Zhang <kevin@kevinzhang.me>
Link: https://github.com/openwrt/openwrt/pull/16738
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-27 14:57:51 +01:00
Kevin Zhang
e35f0493b1 uboot-rockchip: add support for NanoPi R3S
This commit adds u-boot support for the NanoPi R3S.

Signed-off-by: Kevin Zhang <kevin@kevinzhang.me>
Link: https://github.com/openwrt/openwrt/pull/16738
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-27 14:57:51 +01:00
Rosen Penev
3cdab2ad44
ramips: use platform_get_irq
No need for irq_of_parse_and_map since this is in _probe.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16771
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-27 14:25:24 +01:00
Matteo Croce
65560de58d
scripts/download.pl: read file natively
Read files natively instead of execing /bin/cat.

Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://github.com/openwrt/openwrt/pull/16784
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-27 14:24:32 +01:00
Til Kaiser
5fdd18243e
xdp-tools: re-add vlan_hdr struct
Drop the patch to re-add the vlan_hdr struct
because it is required now to build xdp-filter.

Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/16798
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-27 14:23:22 +01:00
Marius Dinu
63ea5710d9 kernel: add missing CONFIG_DM_AUDIT
The option shows up when kmod-dm and CONFIG_KERNEL_AUDIT are selected.

Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
Link: https://github.com/openwrt/openwrt/pull/16793
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-27 12:45:16 +01:00
Daniel Golle
a2aabc9a7a kernel: add MultiPath TCP diag kernel module
Add INET diag socket monitoring interface module for MultiPath TCP.
It allows using native Linux socket diagnostic tools such as 'ss' for
Multipath TCP connections.

Co-authored-by: Rodrigo B. de Sousa Martins <rodrigo.sousa.577@gmail.com>
Signed-off-by: sKy King <29267720+sKyissKy@users.noreply.github.com>
Link: https://github.com/openwrt/openwrt/pull/12884
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-26 15:21:03 +01:00
Daniel Golle
c8d5abd62b kernel: enable Multi-Path TCP for !SMALL_FLASH targets
Expose Kernel's CONFIG_MPTCP option and enable it by default for
!SMALL_FLASH targets.

The idea behind enabling it by default is to allow users of the binary
distribution to make use of MPTCP tunneling for link aggregation.

Using MPTCP for link aggregation is an often discussed topic in the
forum and there is even a whole OpenWrt fork (MPTCPRouter) just for that.

Enabling the kernel-side of the story by default will allow using MPTCP
on vanilla OpenWrt without having to build anything from source.

See also https://openwrt.org/docs/guide-user/network/mptcp

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-26 15:21:03 +01:00
Daniel Golle
b6c2422448 generic: mtk_wed: fix path of MT7988 WO firmware
commit eee3c695f3 ("linux-firmware: add offloading firmware for MT7988")
added mt7988_wo_{0,1}.bin in the 'mediatek/mt7988' directory while driver
currently expects the files in the 'mediatek' directory.

Import pending patch which changes the path in the driver header now
that the firmware has been added.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-26 15:21:03 +01:00
Andreas Gnau
1dc86af356
airoha: Clarify subtarget compatibility
Clarify compatibility of the two subtargets with different SoCs to
reduce confusion. The added SoC names only differ in small details such
as features enabled (PoN vs DSL for example).

Signed-off-by: Andreas Gnau <andreas.gnau@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/16785
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-25 19:47:07 +02:00
Shiji Yang
d7ed4c77b5 ramips: rt3883: convert devices to interrupt-driven gpio-keys
This converts all RT3662 and RT3883 devices to use interrupt based
gpio-keys instead of gpio-keys-polled. The poll-interval will be
removed.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16764
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-25 13:56:14 +02:00
Shiji Yang
0bcb64041a ramips: rt305x: convert devices to interrupt-driven gpio-keys
This converts all RT305x and RT5350 devices to use interrupt based
gpio-keys instead of gpio-keys-polled. The poll-interval will be
removed.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16764
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-25 13:56:14 +02:00
Shiji Yang
a3819e23be ramips: rt2880: convert devices to interrupt-driven gpio-keys
This converts all RT2880 devices to use interrupt based gpio-keys
instead of gpio-keys-polled. The poll-interval will be removed.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16764
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-25 13:56:14 +02:00
Shiji Yang
7cc53ef09b ramips: mt76x8: convert Minew G1-C to interrupt-driven gpio-keys
All other MT76x8 devices have already been migrated to gpio-keys.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16764
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-25 13:56:14 +02:00
Shiji Yang
0d4616b838 ramips: dts: add the missing interrupt properties for GPIO nodes
The Ralink GPIO driver supports irqchip function. Hence we need to
add "interrupt-parent" and "interrupt-controller" properties to make
sure it works properly. It is worth noting that all GPIO devices
share the same interrupt line.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16764
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-25 13:56:14 +02:00
Shiji Yang
2b2abdbb75 ramips: ralink-gpio: use irqchip helpers to register driver
The gpiolib has already introduced a general GPIO irqchip framework
to initialize the GPIO irqchip[1]. This patch will make use of it
to simplify the legacy Ralink GPIO driver codes. This patch also
includes some code readability improvements.

[1] 1425052097b5 ("gpio: add IRQ chip helpers in gpiolib")
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16764
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-25 13:56:14 +02:00
Hauke Mehrtens
27657050d0 mbedtls: update to 3.6.2
Fixes the following security problem:
* CVE-2024-49195: Fix a buffer underrun in mbedtls_pk_write_key_der()
  when called on an opaque key, MBEDTLS_USE_PSA_CRYPTO is enabled, and
  the output buffer is smaller than the actual output. Fix a related
  buffer underrun in mbedtls_pk_write_key_pem() when called on an opaque
  RSA key, MBEDTLS_USE_PSA_CRYPTO is enabled and MBEDTLS_MPI_MAX_SIZE is
  smaller than needed for a 4096-bit RSA key.

Link: https://github.com/openwrt/openwrt/pull/16768
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-24 20:17:27 +02:00
Christian Marangi
6835ff8cbc
include/package-pack: Set missing Maintainer and URL for APK
Set missing Maintainer and URL info for .apk creation.

Fixes: d788ab376f ("build: add APK package build capabilities")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-24 12:46:47 +02:00
Christian Marangi
abeaf8df5c
include/package-pack: remove whitespace for Description info for APK
Remove whitespace for Description info for .apk creation

Fixes: b6bbc76c0b ("include/package-pack: set missing Description on .apk creation")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-24 12:46:26 +02:00
Rosen Penev
4175828482 mpc85xx: move CONFIG_MTD_SPLIT_FIRMWARE up
It's shared by all targets. Unlike the other shared symbols, it's not
removed by kernel_oldconfig.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16756
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-24 00:30:11 +02:00
Rosen Penev
dfc8e8d09a apm821xx: move CONFIG_GENERIC_PHY up
It's shared by both subtargets.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16754
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-24 00:25:28 +02:00
John Audia
8e294af41b kernel: bump 6.6 to 6.6.58
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.58

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16758
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-24 00:23:24 +02:00
Daniel Golle
b27075e12b mediatek: add wireless offloading firmware to MT7988 boards
Install mt7988-wo-firmware by default on boards based on MT7988.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-23 13:40:09 +01:00
Daniel Golle
eee3c695f3 linux-firmware: add offloading firmware for MT7988
Package wireless offloading firmware for MediaTek MT7988.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-23 13:40:09 +01:00
Christian Marangi
d7dc5b1b4d
airoha: rename subtarget from en7581 to an7581
The Airoha EN7581 got renamed to AN7581 due to move from Econet to
Airoha.

To save on compatibility, use both compatible for the device.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-23 12:32:03 +02:00
Christian Marangi
43d07feb91
airoha: en7581: refresh and fix PWM patch
Refresh and fix PWM patch with new revision proposed upstream.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-23 12:32:03 +02:00
Christian Marangi
b6bbc76c0b
include/package-pack: set missing Description on .apk creation
Set missing description info on .apk creation. This was probably a TODO
that wasn't notice when the final implementation was pushed.

Fixes: d788ab376f ("build: add APK package build capabilities")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-23 00:11:55 +02:00
Hauke Mehrtens
1306885968 kernel: Reorder config files
Reorder the kernel configuration files.

This was done uisng:
./scripts/kconfig-reorder.sh

Link: https://github.com/openwrt/openwrt/pull/16743
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-22 21:13:26 +02:00
Hauke Mehrtens
d0abb26f40 mediatek: Remove double CONFIG_HARDEN_BRANCH_PREDICTOR
CONFIG_HARDEN_BRANCH_PREDICTOR option is included two times in this
configuration file. Remove one definition. On arm32 SoC it should not be
needed.

Fixes: 54f9744c82 ("treewide: disable spectre mitigation on unaffected Arm32 targets")
Link: https://github.com/openwrt/openwrt/pull/16743
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-22 21:13:26 +02:00
Hauke Mehrtens
b8816343fb scripts: Add script to reorder kernel config-* files
This script will reorder the content of all config-* files in the target
folder. It will also remove duplicates. It will not remove options
already defined in the generic configuration.

Link: https://github.com/openwrt/openwrt/pull/16743
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-22 21:13:26 +02:00
Felix Fietkau
7e542f6a77 hostapd: fix build error with SAE disabled
Fixes: b2a2c28617 ("hostapd: add support for authenticating with multiple PSKs via ubus helper")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 16:57:43 +02:00
Christian Marangi
eeb59f87a1
ppp: install pkg-config file on InstallDev
It seems some package (sstp-client) makes use of pppd.pc file to detect
the ppp version as 2.5.0 changed some API.

Also install the .pc file to permit the version detection of pppd.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-22 16:10:05 +02:00
Felix Fietkau
04fb05914e wifi-scripts: add multi-radio config support
Emit one wifi-device section per wiphy radio

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 14:40:43 +02:00
Felix Fietkau
cb60bee04d iwinfo: add multi-radio support
Fix the path to the hostapd config file for queries

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 14:40:43 +02:00
Felix Fietkau
5c1ee08e2d iw: add multi-radio support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 14:40:43 +02:00
Felix Fietkau
5db27664bc ucode: add support for nl80211 vif radio mask
Used for multi-radio support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 14:40:43 +02:00
Felix Fietkau
87033c3a0b mac80211: improve single-wiphy multi-radio support
- add support for configuring allowed radios for a vif
- add support for monitor mode on multiple channels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 14:40:42 +02:00
Felix Fietkau
b2a2c28617 hostapd: add support for authenticating with multiple PSKs via ubus helper
Also supports assigning a VLAN ID based on the PSK

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 14:40:42 +02:00
Christian Marangi
9272728e35
imagebuilder: also remove vmlinuz initramfs image files
Also remove vmlinuz-initramfs files from final imagebuilder image as
these file are not needed.

Fixes: c85348d9ab ("imagebuilder: remove initramfs image files")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-22 13:53:51 +02:00
Felix Fietkau
2923935093 uclient: update to Git HEAD (2024-10-22)
88ae8f208dd3 uclient-http: fix a typo

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 13:15:54 +02:00
Felix Fietkau
ed484caa03 hostapd: add support for querying bss config parameters via ubus
Supports reading the same parameters currently being used by iwinfo.
Preparation for replacing iwinfo with a rewrite in ucode.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-22 13:09:26 +02:00
Piotr Dymacz
efb8764a69 uboot-envtools: ath79: add support for ALFA Network WiFi CampPro Nano Duo
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2024-10-22 12:26:01 +02:00
Piotr Dymacz
861a9dac68 ath79: add support for ALFA Network WiFi CampPro Nano Duo
ALFA Network WiFi CampPro Nano Duo is a dual-radio Wi-Fi signal extender
(router) in USB dongle form-factor (Type-A plug is used only for power),
based on combination of two radio chipsets: Qualcomm QCA9531 (main SOC)
and MediaTek MT7610U (connected over USB 2.0 interface).

Specifications:

- SOC:      QCA9531 v2 (650 MHz)
- DRAM:     DDR2 128 MiB (Nanya NT5TU64M16HG-AC)
- Flash:    16 MiB SPI NOR (Macronix MX25L12835F)
- Ethernet: 1x 10/100 Mbps Ethernet (QCA9531)
- Wi-Fi:    2x2:2 2.4   GHz Wi-Fi 4 (QCA9531)
            1x1:1 2.4/5 GHz Wi-Fi 5 (MT7610U)
- Antenna:  3x RP-SMA (female) antenna connectors
- LED:      1x orange (RJ45, power indicator)
            2x green  (status + RJ45 activity/link)
            1x blue   (Wi-Fi 2.4 GHz status)
- Button:   1x button (reset)
- UART:     1x 4-pin, 2.00 mm pitch header on PCB
- Other:    external h/w watchdog (EM6324QYSP5B, enabled by default)
            GPIO-controlled USB power for MT7610U

MAC addresses:

- LAN:                 00:c0:ca:xx:xx:6d (art 0x2, -1)
- 2.4 GHz (QCA9531):   00:c0:ca:xx:xx:6e (art 0x2, device's label)
- 2.4/5 GHz (MT7610U): 00:c0:ca:xx:xx:6f (from eeprom)

Flash instructions:

You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
   wait for first blink of status LED (indicates network setup), then
   keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2024-10-22 12:25:58 +02:00
Markus Stockhausen
3098b4bf07 scripts: linksys-image: add NAND devices
The larger switches of the Linksys LGS series (e.g. LGS352C) make
use of NAND. So the vendor firmware uses other commands to upload
an image through the WebUI.

Add the required scripts. With this we can upload an image to all
devices of that series. Independant of NOR or NAND.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16711
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-22 10:10:17 +02:00
Ivan Pavlov
e1d6013935 iptables: update to 1.8.10
Source archive format changed to tar.xz

Removed upstreamed
  020-treewide-use-uint-instead-of-u_int.patch
  030-revert-fix-build-for-missing-ETH_ALEN-definition.patch
  040-xshared-Fix-build-for-Werror-format-security.patch
  050-build-fix-error-during-out-of-tree-build.patch
  060-libxtables-unexport-init_extensions-declarations.patch
  070-extensions-string-Review-parse_string-function.patch
  104-nft-track-each-register-individually.patch

Manually rebased
  600-shared-libext.patch

Change netfiletr.mk due to module name change
  https://git.netfilter.org/iptables/commit/?id=f30c5edce0413b2b2346c7f58e801f10f6e9bc5a

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-22 00:52:03 +02:00