0cfd1043e6c4 zytrx: add ZyXEL LTE7490-M904
3d09357fc7b5 asusuimage: new tool for creating TRX-images compatible with AsusWRT
f35781fcd2c3 asusuimage: fix compile error with old GCC release
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Asus RT-AX89X has modded U-Boot that boots FIT images fine when manually
using bootm command, however once the image is flashed and device boots via
the default bootcmd it only supports booting via legacy images.
More precisely, it requires the "multi" image format with:
1. kernel
2. ramdisk
3. DTB
So, lets add a recipe based on the existing uImage one.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
PMD Global Transmit Disable bit should be cleared for normal operation.
This should be HW default, however I found that on Asus RT-AX89X that uses
AQR113C PHY and firmware 5.4 this bit is set by default.
With this bit set the AQR cannot achieve a link with its link-partner and
it took me multiple hours of digging through the vendor GPL source to find
this out, so lets always clear this bit during .config_init() to avoid a
situation like this in the future.
aqr107_wait_processor_intensive_op() is moved up because datasheet notes
that any changes to this bit are processor intensive.
This is a modified version of patch that got merged upstream as AQR113C
has a separate config_init() upstream.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Asus RT-AX89X has an external QCA8337 switch that has built-in
internal ethernet PHY-s that are supported by the QCA83XX PHY driver so
lets enable it.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Asus RT-AX89X has an Qualcomm QCA8337 switch used to provide additional
1G copper ports, so lets enable qca8k in order to utilize DSA instead of
relying on SSDK for it.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Asus RT-AX89X is using GPIO bitbanged MDIO on newer HW revisions, so lets
enable it in kernel config.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems that newer SSDK is now expecting the switch node to be a subnode
of "ess-instance" node which also contains "num_devices" as the number of
switches as you can also have external switches connected.
Asus RT-AX89X is even more peculiar as its bootloader has a hardcoded path
to enable if on that revision there is an AQR113 connected to port 6 of the
switch.
So, lets move the current switch node under ess-instance as otherwise it
seems that SSDK is having some issues parsing the UNIPHY mode properly as
I am getting the following:
[ 6.981404] _adpt_hppe_instance1_mode_get[3275]:ERROR:port 6 doesn't support port_interface_mode 9
Which should not happen as that port has the mode set to 13.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, SSDK is creating a fake SFP PHY which has no OF node populated,
thus making it impossible to pass it to NSS-DP so port can actually work.
We eliminated QCA-s connecting of the PHY by manually creating a string
and then matching by name and instead only support passing the PHY as
phandle via phy-handle.
So, lets just use the switch port node to which the SFP is connected to
anyway and set it as the PHY device OF node so we can pass it to NSS-DP.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Exclude initramfs-images dependency with IB as the target is not defined
in such context.
Fixes: cc6a0abcab ("image: make images and artifacts dependent of initramfs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
It seems that util-linux enables NLS support by default, this worked for
almost all platforms except for macOS on x86 where it seems that libintl is
preinstalled and thus it will link against gettext with libintl for NLS
support.
This would the later cause e2fsprogs and mtd-utils to fail:
Undefined symbols for architecture x86_64:
"_libintl_gettext", referenced from:
_random_tell_source in libuuid.a[13](libuuid_la-randutils.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Issue appeared after I converted the tool to use --disable-all-programs and
accidentally dropped the --disable-nls from the args.
Fixes: 54115ec22d ("tools: util-linux: use --disable-all-programs")
Link: https://github.com/openwrt/openwrt/pull/15909
Signed-off-by: Robert Marko <robimarko@gmail.com>
Exclude additional initramfs image for Netgear RAX120v2 when no
initramfs image are compiled to fix build error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
There is currently a BIG bug in how the images dependency is handled and
recent Per Device Rootfs made this more clear and less statistical.
There is currently no dependency between images/artifacts build with
initramfs build. This cause whatever additional image that depends on an
initramfs image to fail as it might happen that image and initramfs
build are called at the same time and the additional image is called
before initramfs build has finished.
Each image-command assume the source image to be taken from the /bin
directory but that is only copied from the /tmp directory only at the
end of the process.
Artifacts currently depends on image with the use of the
BOARD-NAME-images Makefile target, but this is not the case for
initramfs that also define a -images Makefile target but that is not
accounted in images (that might depend on some initramfs images)
To actually fix this, introduce a new Makefile target, -initramfs-images
and make image and artifacts build to depend on this. Since initramfs
images are optional, this dependency is actived only when initramfs
image are built.
With this change we correctly enforce the build order:
- Initramfs Images (optional)
- Images
- Artifacts
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Also fix CopyImage for Separate Initramfs with Per Device Rootfs.
Fixes: 7bffb3f72b ("kernel: fix CopyImage function with Per Device Rootfs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Trying to compile x86 or x86_64 on macOS will fail with:
openwrt/build_dir/target-x86_64_musl/linux-x86_64/linux-6.6.36/tools/include/linux/rbtree.h:21:10: fatal error: 'linux/stddef.h' file not found
After some digging, it seems that we dropped the old 212-tools_portability
patch when 6.6 x86 support was added, then Felix added back some parts of
it in ("kernel: fix tools build breakage on macos with x86") but trying to
build x86 kernels will still fail.
So, lets add more of the required changes from the 212-tools_portability
patch so that x86 kernels build on macOS.
Fixes: 69b145188f ("generic: 6.6: Removal of tools_portability.patch already included in kernel 6.6")
Link: https://github.com/openwrt/openwrt/pull/15904
Signed-off-by: Robert Marko <robimarko@gmail.com>
ncurses is built with wide support enabled, which enables libncursesw.
The problem is, the ncurses build system only supplies ncursesw or
ncurses.pc but not both. The other problem is, the readline build tests
for libncurses before the w variant, making its pc file unusable as
there is no ncurses.pc file to satisfy the Required: ncurses section.
Just override the library.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15864
Signed-off-by: Robert Marko <robimarko@gmail.com>
Needed for things such as readline that depend on ncurses.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15864
Signed-off-by: Robert Marko <robimarko@gmail.com>
After changes to default host build recipes
and default variable definitions,
several custom definitions can be removed,
and the gnulib recipes replaced
with hooks to common recipes.
Also remove leftover PKG_INSTALL
which has no effect for host builds.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Usage of g++ should mimic the usage of gcc,
otherwise, part of a binary or library may have
optimizations and part of it may not,
unbeknownst to the users or developers working on a build.
This can lead to some features like, for example, FORTIFY_SOURCE,
to have less of an effect or even cause a build error on some hosts.
Therefore, let HOST_CXXFLAGS default to HOST_CFLAGS.
Fixes: 87d489f67 ("build: add HOST_CXXFLAGS for host build")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add generic recipes for incorporating gnulib into a build
for simplification and readability of the individual build Makefile.
Recipes for configuring and installing are purposefully missing
since "configuring" gnulib is done with standard autoreconf
and gnulib is not a final build target meant for installing.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for overriding the SUBDIRS variable while invoking Make
by defining it after Make in the command line.
This is useful for builds that have previously patched out
the building of certain subdirectories in projects
that use recursive and independent Makefiles,
for example, to block the building of docs or test suites.
The wildcard function is used in the case of there being
subdirectories within any of the subdirectories,
for example, in the building of gengetopt,
in order to avoid the problem where Make will attempt
to execute a Makefile in a subdirectory that does not exist
within the subdirectory it is currently running from
because it really exists at the top-level, or one that exists
within one of the subdirectories when ran from top-level.
There are also cases where the Makefiles in the subdirectories
have the recursive building rules even though there are no more
subdirectories beyond that point, for example, with gnulib.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Replace the symlink in the build recipe for gnulib
with an extra include path flag in CPPFLAGS to the lib subdirectory
so that it is the last in the order of include paths,
and use a quote escape to make the flag a literal string
in order to use Make variables within it.
The original reason this is necessary is because the config.h header
provided by the project at the top-level build directory
calls another header eu-config.h
which is stored in the lib subdirectory instead of the top-level,
and building the gnulib library requires the config.h header.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some target define custom kernel images with KERNEL_INITRAMFS_NAME to
reference .elf variant of vmlinux.
With Per Device Rootfs, the expected format is
image.suffix.extension.ROOTFS_ID, while in CopyImage we are currently
generating images with image.suffix.ROOTFS_ID.extension making some
target failing.
Fix CopyImage function to correctly follow the expected pattern.
Fixes: 97fd059e7e ("image: respect TARGET_PER_DEVICE_ROOTFS for initramfs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
When building the kernel with -Wmaybe-uninitialized, GCC reports this
warning:
block/partitions/fit.c: In function 'parse_fit_partitions':
block/partitions/fit.c:164:3: warning: 'images' may be used uninitialized in this function [-Wmaybe-uninitialized]
164 | printk(KERN_ERR "FIT: Cannot find %s node: %d\n", FIT_CONFS_PATH, images);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It appears to be a copy paste error. It's the "config" variable that is
supposed to be printed.
Fixes: e6aac8d98f ("image: add support for building FIT image with filesystem")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
fit size should be rounded up instead of rounding down first and adding
a block. Otherwise the calculated size is one block more than needed
when fit size is exactly multiples of one block size.
Fixes: 9a863f803e ("kernel: mtdsplit: add support for FIT image")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Since 6.6 is now default, drop 6.1 support.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Let's switch the lantiq target to use kernel 6.6 by default.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This backports the fix for the broken "nosmp" and "maxcpus=0" cmdline
params.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Convert DSL_XTUDir_t to DSL_AccessDir_t to get rid of enum-conversion
warning.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Satisfy compiler expectations in a hell of typedef's and get rid of
system-wide workqueue flush. Results in warning-free compile of the TAPI
driver also with Linux 6.6.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Since 6.1 is now default, drop 5.15 support.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
With PER_DEVICE_ROOTFS, rebuilding kernel is needed to embed the cpio
image in the kernel image. With ROOTFS_INITRAMFS_SEPARATE, the cpio
image is external hence we can reuse the same kernel image without
rebuilding it.
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fit command makes use of CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE as the
cpio is provided externally and is not embedded in the kernel image.
As done with embedded cpio, also handle PER_DEVICE_ROOTFS by generating
a cpio for each rootfs and reference them by the ROOTFS_ID generated
previously. The generated cpio are placed in the linux directory + the
package ID.
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Initramfs images were using a common rootfs (TARGET_DIR) for all
devices, ignoring TARGET_PER_DEVICE_ROOTFS. If a single device required
a package to build a functional initramfs image, it should be included
by default for all devices or that device should be isolated into a new
subtarget. Now the initramfs will be built using the target-specific
Implementing Per Device Rootfs for Initramfs is not trivial as the
rootfs needs to be embedded in the kernel image. The kernel supports an
option to define the initramfs location and the image generation for the
kernel can't be run in parallel as other checks are done to config and
other arch dependent files.
To handle this, we prepare a config for each rootfs and we generate the
images under lock to prevent problem with parallel execution.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[ rework implementation for locking support ]
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Simplify SetInitramfs compression ALGO config setup by using Makefile
foreach.
While at it also make it more readable.
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rework SetInitramfs functions to take a second arg to define the
location of the .config. This is needed in preparation for PER_ROOTFS
Initramfs support as we will prepare .config in dedicated directory and
use them only later when the image is actually built.
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Allow Kernel/CompileImage/Initramfs to use a different rootfs location.
If the additional arg is not defined, TARGET_DIR is used by default.
This allows the caller to customize the kernel initramfs for different
rootfs.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[ simplify commit and rework commit description ]
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add patch implementing operations to get and set flow-control link
parameters of mtk_eth_soc via ethtool.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.36..rpi-6.6.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
WiFi calibration data is already obtained via in-kernel NVMEM framework.
There is no need to also do so in userspace.
Fixes: dd58ad968a ("mediatek/filogic: add OpenWrt One support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The new numberspace base starts from 512 instead of 0. The number
base seems come from the kernel symbol CONFIG_GPIOLIB_FASTPATH_LIMIT.
Suppress warning:
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
The numberspace base has been changed since 6.6 kernel:
chip_num chip0 chip1 chip2 (32 gpios per bank)
old base 480 448 416
new base 512 544 576
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
