openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 23:42:43 +00:00

Author	SHA1	Message	Date
Jonas Gorski	4aa43122ab	bcm63xx: enable bcm6328 support and required drivers BCM6328 support is in a usable state, with the following issues * internal switch port not configurable * external phys not supported * broadcom wifis will probably not work correctly * and all other generic bcm63xx issues (so yes, still no ADSL) SVN-Revision: 31883	2012-05-27 13:22:46 +00:00
Jonas Gorski	e5575fe335	bcm63xx: add support for DSL-274XB rev F1 SVN-Revision: 31882	2012-05-27 13:22:43 +00:00
Jonas Gorski	a7a82db16f	bcm63xx: fix port state after network down bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. SVN-Revision: 31881	2012-05-27 13:22:40 +00:00
Jonas Gorski	e19ed52fd1	bcm63xx: add a fixup for ath9k devices SVN-Revision: 31880	2012-05-27 13:22:37 +00:00
Jonas Gorski	e34018cc9e	bcm63xx: add support for the HSSPI controller Add support for the HSSPI controller found on bcm6328 and SPI attached flash. SVN-Revision: 31879	2012-05-27 13:22:33 +00:00
Jonas Gorski	099d5eec06	bcm63xx: add preliminary support for bcm6328 SVN-Revision: 31878	2012-05-27 13:22:29 +00:00
Jonas Gorski	7dbb132c88	bcm63xx: add flash type detection SVN-Revision: 31877	2012-05-27 13:22:25 +00:00
Jonas Gorski	b0ffeb0021	bcm63xx: pad Speedport W303 V images to 4 MiB Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. SVN-Revision: 31876	2012-05-27 13:22:22 +00:00
Jonas Gorski	226b030e44	bcm63xx: add a default switch configuration for DSL-274XB SVN-Revision: 31874	2012-05-27 13:22:17 +00:00
Jonas Gorski	db1ff5c6fa	bcm63xx: setup network config through uci-defaults SVN-Revision: 31873	2012-05-27 13:22:14 +00:00
Jonas Gorski	72b4fdecc9	bcm63xx: move the board name workaround to /lib/brcm63xx.sh SVN-Revision: 31872	2012-05-27 13:22:11 +00:00
Jonas Gorski	dd37687de0	bcm63xx: use the exact board id as board identification string No need to keep the bcm63xx/ at the start or the chipid info at the end. SVN-Revision: 31871	2012-05-27 13:22:08 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Jonas Gorski	b218b15709	bcm63xx: fix a race between PCI bus scan and fallback sprom registration The fallback sprom handler was installed too late, resulting in ssb failing to get a valid sprom on some devices. Fixes #11384. SVN-Revision: 31638	2012-05-06 21:25:34 +00:00
Florian Fainelli	5d9b44d110	use a define for the poll and debounce interval SVN-Revision: 31550	2012-05-02 15:40:26 +00:00
Gabor Juhos	cbfce53831	kernel: update linux 3.3 to 3.3.4 SVN-Revision: 31541	2012-04-30 08:38:11 +00:00
Florian Fainelli	e047cf1899	switch to gpio-keys-polled SVN-Revision: 31491	2012-04-27 16:44:48 +00:00
Jonas Gorski	8a38c62c07	bcm63xx: drop linux 3.2 support SVN-Revision: 31464	2012-04-24 11:49:27 +00:00
Jonas Gorski	77219290e1	bcm63xx: drop linux 3.0 support SVN-Revision: 31463	2012-04-24 11:49:24 +00:00
Jonas Gorski	49de6c1714	bcm63xx: switch kernel to 3.3 SVN-Revision: 31462	2012-04-24 11:49:19 +00:00
Jonas Gorski	f7df1eafc4	bcm63xx: enable bcm6368 for linux 3.3 and build images Only build bcm6368 images when building for linux 3.3. SVN-Revision: 31133	2012-03-28 20:42:37 +00:00
Jonas Gorski	c7ae2fccb6	bcm63xx: add initial support for bcm6368 boards SVN-Revision: 31132	2012-03-28 20:42:34 +00:00
Jonas Gorski	68f268a5eb	bcm63xx: add driver for the internal hw trng on bcm6368 SVN-Revision: 31131	2012-03-28 20:42:30 +00:00
Jonas Gorski	78fb818f7c	bcm63xx: replace SPI driver with latest upstream version SVN-Revision: 31130	2012-03-28 20:42:25 +00:00
Jonas Gorski	a2adca6ee9	bcm63xx: add ethernet support for bcm6368 Add basic support for the internal ethernet switch on bcm6368. It behaves as a dumb switch for now, but allows basic connectivity. Also drop the ethernet patch for bcm6345 for now, it needs rework. SVN-Revision: 31129	2012-03-28 20:42:20 +00:00
Jonas Gorski	0876972850	bcm63xx: add missing bits from extirq support Add missing external IRQ code parts for older chips in the new code. SVN-Revision: 31128	2012-03-28 20:42:15 +00:00
Jonas Gorski	44d546290a	bcm63xx: reorder patches Reorder patches for a clearer distinction between the purposes of the different patches. SVN-Revision: 31127	2012-03-28 20:42:09 +00:00
Felix Fietkau	db6e326c56	targets: replace madwifi in profiles with ath5k, madwifi is unmaintained SVN-Revision: 31015	2012-03-19 09:58:13 +00:00
Florian Fainelli	07486c4d96	remove udc patch since it is unused SVN-Revision: 30920	2012-03-13 14:06:44 +00:00
Florian Fainelli	1029786936	remove 3.1 support SVN-Revision: 30823	2012-03-05 16:50:42 +00:00
Florian Fainelli	75b5f4a6b4	rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic SVN-Revision: 30822	2012-03-05 14:49:34 +00:00
Florian Fainelli	c327915156	generate generic images for BCM96358VW and BCM96358VW2 (#10666 ) SVN-Revision: 30821	2012-03-05 14:49:31 +00:00
Florian Fainelli	ca1e59660e	wire bcm96348gw-10 reset button (#10854 ) SVN-Revision: 30820	2012-03-05 14:23:45 +00:00
Florian Fainelli	631a035a76	Merge branch 'bcm63xx' SVN-Revision: 30819	2012-03-05 13:29:54 +00:00
Jonas Gorski	778e5d4fa5	brcm63xx: add support for linux 3.3 SVN-Revision: 30027	2012-02-04 10:17:27 +00:00
Jonas Gorski	e67f4477bb	kernel: update linux 3.0 to 3.0.18 SVN-Revision: 29965	2012-01-31 09:43:53 +00:00
Florian Fainelli	882eddbf92	build 96348R images SVN-Revision: 29960	2012-01-30 21:12:32 +00:00
Florian Fainelli	0700644b16	remove support for 2.6.39 SVN-Revision: 29959	2012-01-30 21:12:28 +00:00
Florian Fainelli	038fc8eac3	bump to 3.0.17 SVN-Revision: 29958	2012-01-30 21:12:25 +00:00
Jonas Gorski	3883e71097	brcm63xx: add support for linux 3.2 SVN-Revision: 29731	2012-01-13 14:59:50 +00:00
Jonas Gorski	c560444a58	kernel: update linux 3.1 to 3.1.9 SVN-Revision: 29726	2012-01-13 14:38:28 +00:00
Jonas Gorski	e49d3e1d5b	kernel: update linux 3.0 to 3.0.17 SVN-Revision: 29725	2012-01-13 14:10:44 +00:00
Daniel Dickinson	034b7f0ef5	Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. SVN-Revision: 29712	2012-01-11 13:47:48 +00:00
Florian Fainelli	718907b661	don't package gpioctl by default SVN-Revision: 29288	2011-11-21 16:36:39 +00:00
Jo-Philipp Wich	b5739aabd9	fix D-Link DSL-2650U image generation SVN-Revision: 29266	2011-11-19 21:34:51 +00:00
Jonas Gorski	8bac0df4ae	linux: update 3.0 to 3.0.9 SVN-Revision: 29264	2011-11-19 18:39:12 +00:00
Florian Fainelli	ae90aa4efd	build images for D-Link DSL-2650U (#9003 ) SVN-Revision: 29238	2011-11-18 10:37:03 +00:00
Florian Fainelli	7f787707de	build images for Pirelli A226M (#10409 ) SVN-Revision: 29045	2011-11-13 19:19:22 +00:00
Florian Fainelli	5dc2098448	register uart0 on DWV-S0 boards (#10409 ) SVN-Revision: 29044	2011-11-13 19:19:18 +00:00
Florian Fainelli	717a4391d7	rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch SVN-Revision: 29041	2011-11-13 19:19:05 +00:00
Jonas Gorski	d8acb75009	linux: update 3.1 to 3.1.1 SVN-Revision: 29007	2011-11-13 10:48:05 +00:00
Jo-Philipp Wich	a9e64493d8	target: globally disable BSD process accounting SVN-Revision: 28584	2011-10-25 16:18:36 +00:00
Hauke Mehrtens	09b1073f9b	kernel: update kernel to version 2.6.39.4 SVN-Revision: 28022	2011-08-16 22:04:10 +00:00
Florian Fainelli	b59ab7d13b	fix ehci build on 3.0+ SVN-Revision: 27946	2011-08-10 11:37:25 +00:00
Florian Fainelli	0e40c19b45	add ignore_oc in struct ehci_hcd SVN-Revision: 27945	2011-08-10 11:37:21 +00:00
Jonas Gorski	6b5f483efa	bcm63xx: add support for linux 3.1-rc1 SVN-Revision: 27941	2011-08-09 12:19:49 +00:00
Florian Fainelli	c37a9544bf	add support for BCM6345 Ethernet DMA engine SVN-Revision: 27881	2011-08-02 18:55:55 +00:00
Florian Fainelli	11c4128770	improve BCM6345 support - runtime detect the amount of memory available - define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks - fix GPIO control SVN-Revision: 27880	2011-08-02 18:55:46 +00:00
Jonas Gorski	4e6c93bef1	bcm63xx: Fix SPI commands and register offsets for BCM6348 In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that. It also fixes some spi commands for all bcm63xx. Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk> SVN-Revision: 27774	2011-07-25 19:52:47 +00:00
Florian Fainelli	9c7294f7c7	add ehci support to DWV-S0 board (#9059 ) SVN-Revision: 27622	2011-07-16 08:39:04 +00:00
Florian Fainelli	930485561c	fix GEN_SPI_RSET_BASE macro (#9697 ) SVN-Revision: 27604	2011-07-13 09:33:11 +00:00
Florian Fainelli	00ad56b73e	move board_HW553 inside the ifdef ..BCM6358 .. endif block SVN-Revision: 27484	2011-07-06 10:00:39 +00:00
Daniel Dickinson	1141165bb9	Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. SVN-Revision: 27471	2011-07-06 06:35:24 +00:00
Daniel Dickinson	9dc72505a2	profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc SVN-Revision: 27470	2011-07-06 06:35:22 +00:00
Florian Fainelli	7c3bbe150a	hw553: fix missing has_uart0 in board definition (#9533 ) SVN-Revision: 27448	2011-07-04 15:04:58 +00:00
Hauke Mehrtens	c5821c1a3a	kernel: update kernel to 2.6.39.2 SVN-Revision: 27298	2011-06-28 19:30:58 +00:00
Hauke Mehrtens	ca979845cc	kernel: update ssb and bcma to linux-next next-20110627 SVN-Revision: 27295	2011-06-27 21:28:40 +00:00
Florian Fainelli	3f40c0f7df	remove gpiodev, prefer sysfs gpio SVN-Revision: 27284	2011-06-25 19:26:17 +00:00
Florian Fainelli	f6e4eb15bc	register SSB sprom after ethernet devices In case the MAC address pool is not big enough to also register a SSB SPROM prefer registering the Ethernet devices. SVN-Revision: 27258	2011-06-22 12:32:03 +00:00
Florian Fainelli	5a76c6bdd7	fix tab damage in 141-led_count.patch SVN-Revision: 27254	2011-06-21 20:52:58 +00:00
Florian Fainelli	3f0f8d9c87	fix and make usable kmod-pcmcia-rsrc This module is also needed for e.g: kmod-bcm63xx-pcmcia SVN-Revision: 27253	2011-06-21 20:52:53 +00:00
Florian Fainelli	9bdf6abb9d	use macros to generate SPI registers table and switches SVN-Revision: 27246	2011-06-21 10:05:51 +00:00
Florian Fainelli	ab74628c10	dev-spi.c checks for running CPU, not board code SVN-Revision: 27236	2011-06-19 20:46:00 +00:00
Florian Fainelli	4dd4cbeb43	fixup patches after r27234 SVN-Revision: 27235	2011-06-19 20:28:38 +00:00
Florian Fainelli	7819b530da	remove accidental bcm6345 related patches SVN-Revision: 27234	2011-06-19 20:16:59 +00:00
Florian Fainelli	12db3df666	remove support for 2.6.37 and 2.6.38 SVN-Revision: 27233	2011-06-19 20:14:22 +00:00
Florian Fainelli	6bb0a608dc	switch to 2.6.39 SVN-Revision: 27232	2011-06-19 20:12:45 +00:00
Florian Fainelli	426dccd019	bcm63xx: Add support for Linux 3.0-rc3 Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27192	2011-06-16 14:34:40 +00:00
Florian Fainelli	016e8dee34	bcm63xx: Add support for 2.6.39 Add support for Kernel 2.6.39. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27019	2011-05-27 09:54:52 +00:00
Florian Fainelli	590c82cec1	bcm63xx: Add support for 2.6.38 Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27018	2011-05-27 09:54:48 +00:00
Florian Fainelli	68cb138154	fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch SVN-Revision: 27014	2011-05-26 13:53:00 +00:00
Florian Fainelli	762885081a	renumber patches accordingly SVN-Revision: 27013	2011-05-26 13:52:56 +00:00
Florian Fainelli	2785e3fc12	renumber board patches SVN-Revision: 27012	2011-05-26 12:09:15 +00:00
Florian Fainelli	16dfe8b4d1	add support for BT Voyager 2110 (#8810 ) Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 26959	2011-05-20 10:06:25 +00:00
Florian Fainelli	6c8387fe15	add support for DSL-2640B rev B2 Signed-off-by: Adrian Feliks <mexit@o2.pl> SVN-Revision: 26958	2011-05-20 10:06:22 +00:00
Florian Fainelli	031ea08ef0	refresh patches SVN-Revision: 26957	2011-05-20 10:06:18 +00:00
Florian Fainelli	3e83f60a66	add support for D-Link DVA-G3810BN/TL This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> SVN-Revision: 26956	2011-05-20 10:06:15 +00:00
Florian Fainelli	f0a99c1692	add support for BT Voyager 2500 (#9070 ) SVN-Revision: 26954	2011-05-20 10:06:07 +00:00
Florian Fainelli	acf0ec224f	add support for USR9108 LEDs (#9372 ) SVN-Revision: 26953	2011-05-20 10:06:04 +00:00
Florian Fainelli	9c8a2d5961	bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878	2011-05-11 13:34:14 +00:00
Florian Fainelli	7d3b735854	bcm63xx: Update support for the DSL-274xB revision C Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26876	2011-05-11 13:33:50 +00:00
Florian Fainelli	0fb1c2d537	bcm63xx: Accept any led with power in its name as power led Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26875	2011-05-11 13:33:45 +00:00
Florian Fainelli	c6af9c23b7	bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26874	2011-05-11 13:33:41 +00:00
Florian Fainelli	de02a2795b	fill maintainer infos for a couple of targets SVN-Revision: 26836	2011-05-06 12:37:36 +00:00
Hauke Mehrtens	fcb1557a3e	brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. SVN-Revision: 26829	2011-05-05 14:05:21 +00:00
Hauke Mehrtens	3dbb8c5088	brcm47xx: add fallback sprom for pci devices without an own sprom. If there is no sprom on an ssb based pci device on the brcm47xx architecture ssb now asks the architecture code to look into the nvram to get some sprom data for this device. Now we are able to read out pci/1/1/ foo or pci/1/3/ foo config options. This will fix some problems where the wireless devices does not got an mac address and the following message was show: ssb: WARNING: Invalid SPROM CRC (corrupt SPROM) SVN-Revision: 26801	2011-05-01 20:28:35 +00:00
Felix Fietkau	1fcd26091b	brcm63xx: remove patches/configs for 2.6.35 SVN-Revision: 26709	2011-04-17 18:39:46 +00:00
Daniel Dickinson	8b18ce6807	Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch. SVN-Revision: 26699	2011-04-17 01:15:47 +00:00
Daniel Dickinson	0d722113b9	Generate images for RTA1320_16M-based routers SVN-Revision: 26681	2011-04-15 14:31:36 +00:00
Daniel Dickinson	f83c5938d2	bcm63xx: Move the OpenWrt rootfs length field Dual image capable CFEs store an image sequence at the same place as currently OpenWrt stores the actual rootfs length, so it will get overwritten when flashing through such a CFE. To prevent this from happening, move the rootfs length field to the next four bytes, thus completely using the reserved1 field. Since the reserved1 field is now completely in use, it does not make sense to allow it to be set from the imagetag utility, so remove the option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26680	2011-04-15 12:18:25 +00:00
Hauke Mehrtens	50c743e79e	kernel: Update to version 2.6.37.6 Thank you Peter Wagner for the patch SVN-Revision: 26441	2011-04-03 13:59:07 +00:00
Daniel Dickinson	33b864e899	Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices. SVN-Revision: 26387	2011-03-31 06:16:23 +00:00
Florian Fainelli	aa580d336b	bcm63xx: Really fix the flash driver in 2.6.37 Read back the actual rootfs length from the image tag. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 25938	2011-03-07 16:55:01 +00:00
Florian Fainelli	9dd1454044	fix patches after 2.6.37 update, patch from KanjiMonster SVN-Revision: 25810	2011-03-01 16:02:38 +00:00
Florian Fainelli	94a22b91fc	add support for 2.6.37, patches from KanjiMonster SVN-Revision: 25629	2011-02-20 19:59:22 +00:00
Florian Fainelli	8cc16aa14e	add support for HW553 bcm6358-based boards (#8844 ) SVN-Revision: 25590	2011-02-19 15:44:06 +00:00
Florian Fainelli	b7f8e1276d	add support for 'MAGIC' bcm6348-based board I wrote a patch to add 96348SV board (aka MAGIC) support to trunk. In my case I've found it in a Telsey "Alice W-Gate" router, fairly common (in the past) in Italy. I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2 relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c ) Thanks to KanjiMonster for the support on the IRC channel. Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com> SVN-Revision: 25584	2011-02-19 12:44:27 +00:00
Florian Fainelli	31709b2c76	update to 2.6.35.11 SVN-Revision: 25582	2011-02-19 12:44:16 +00:00
Florian Fainelli	2d3ed6dc2d	fix T-Com Speedport W 500V default config The device is called SPW500V, not SP500W. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 25431	2011-02-09 13:09:02 +00:00
Florian Fainelli	e75274de89	fix build of brcm-wl The fallback needs to be exported for bcm63xx, too. Runtime tested with a BCM4322 on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 25420	2011-02-08 13:46:12 +00:00
Florian Fainelli	bed53c93d6	give some credits to Tanguy Bouzeloc in the spi driver SVN-Revision: 25133	2011-01-27 02:11:08 +00:00
Florian Fainelli	c6d9ec5173	multiple SPI driver fixes - fix platform device registration - fix chipselect, command register defines, add missing clock - make slave select proper - fix multibytes transferts Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com> SVN-Revision: 24849	2010-12-29 16:19:59 +00:00
Daniel Dickinson	dc9c1ac1f7	patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen). SVN-Revision: 24843	2010-12-28 08:10:32 +00:00
Daniel Dickinson	5ee2a6c696	patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working. SVN-Revision: 24842	2010-12-28 04:05:04 +00:00
Florian Fainelli	093ebfe217	spi driver: remove bcm_rset usage Since bcm636x platform embeds two spi master device, the attached patch removes static bcm_rset usage, replaced by "bs->regs" field for all I/O operation. Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 24840	2010-12-28 00:24:50 +00:00
Daniel Dickinson	fc3a1d0ba3	Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> SVN-Revision: 24838	2010-12-26 04:18:13 +00:00
Daniel Dickinson	6ee5411686	base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> SVN-Revision: 24836	2010-12-26 04:18:04 +00:00
Daniel Dickinson	31f7259e3e	mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> SVN-Revision: 24834	2010-12-26 04:17:56 +00:00
Daniel Dickinson	44e22cbd49	Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. SVN-Revision: 24442	2010-12-10 18:59:58 +00:00
Daniel Dickinson	7224337d71	Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. SVN-Revision: 24316	2010-12-08 00:40:31 +00:00
Daniel Dickinson	2a86dcc3d6	Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. SVN-Revision: 24315	2010-12-08 00:40:28 +00:00
Daniel Dickinson	c6ef9a0720	Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile SVN-Revision: 24314	2010-12-08 00:40:24 +00:00
Daniel Dickinson	f8ed133c0a	patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. SVN-Revision: 24310	2010-12-07 17:32:29 +00:00
Daniel Dickinson	0e839ea40d	Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5. It belongs in generic not brcm63xx. SVN-Revision: 24308	2010-12-07 17:02:31 +00:00
Daniel Dickinson	183d628485	patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise SVN-Revision: 24307	2010-12-07 16:42:23 +00:00
Daniel Dickinson	8f9b14dafe	boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. SVN-Revision: 24305	2010-12-07 15:15:54 +00:00
Daniel Dickinson	3baa168e09	patches: Refreshed patches after led_count SVN-Revision: 24304	2010-12-07 15:15:51 +00:00
Daniel Dickinson	b963cbde33	board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit SVN-Revision: 24303	2010-12-07 15:15:47 +00:00
Daniel Dickinson	e5ca4d81f4	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. SVN-Revision: 24302	2010-12-07 15:15:41 +00:00
Daniel Dickinson	ad24e14b35	base-files: Added the preinit information for reset button and preinit indication led, and preinit interface SVN-Revision: 24276	2010-12-06 06:46:03 +00:00
Daniel Dickinson	244db5ac6a	board definition: Fixed CPVA642 LED definitions SVN-Revision: 24275	2010-12-06 06:45:57 +00:00
Daniel Dickinson	8316194016	board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz SVN-Revision: 24274	2010-12-06 04:31:23 +00:00
Daniel Dickinson	7129521696	base-files: Added network defconfig because board only has one ethernet (4-port switch) SVN-Revision: 24273	2010-12-06 02:01:08 +00:00
Daniel Dickinson	9677b65cb6	image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. SVN-Revision: 24191	2010-11-28 22:13:00 +00:00
Daniel Dickinson	314bce63e6	bcm63xx: Add support for the T-Com Speedport W 500V. Add support for the T-Com Speedport W 500V using a special tagged image as it identifies itself as a 96348GW, but has some gpios wired differently, and also has only one ethernet port without a switch attached to it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24190	2010-11-28 22:04:44 +00:00
Daniel Dickinson	3a49f669f2	bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24189	2010-11-28 22:04:40 +00:00
Daniel Dickinson	c51d772e62	bcm63xx: Finalize support for DSL-274xB, rev C2. The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24188	2010-11-28 22:04:36 +00:00
Daniel Dickinson	8fa9b24a4c	bcm63xx: Allow 'colored' power leds. Since some devices have more than one power led, they might be separated by their color in the name. To also allow them to be on after leaving preinit, set any status led starting with 'power' to on instead of only those with the exact name of 'power'. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24187	2010-11-28 22:04:30 +00:00
Daniel Dickinson	fec30c8c80	bcm63xx: Don't hardcode the switch ethernet interface in preinit. Currently eth1 is hardcoded as the expected interface switches in diagmode. This patch replaces the eth1 with the ifname, and also directly tests if the interface specified by ifname has a switch attached. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24186	2010-11-28 22:04:26 +00:00
Daniel Dickinson	b1b318750a	bcm63xx: Add defconfigs. Port the mechanism for different default configurations from ar71xx and use the old configuration as the default configuration. This should have no functional differences to before. While we are at it, remove the obsolete nat option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24185	2010-11-28 22:04:19 +00:00
Imre Kaloz	ead8ab8403	update to the latest stable kernels SVN-Revision: 24136	2010-11-24 18:50:11 +00:00
Daniel Dickinson	195d1d7446	image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section SVN-Revision: 24127	2010-11-24 11:06:13 +00:00
Daniel Dickinson	0c0c1f017f	image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. SVN-Revision: 24118	2010-11-23 20:17:08 +00:00
Daniel Dickinson	049e59a27b	Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). SVN-Revision: 24040	2010-11-19 13:41:54 +00:00
Daniel Dickinson	eadb5c84fa	imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011	2010-11-16 06:46:53 +00:00
Claudio Mignanti	7583fe8668	Add wps button on alice gate SVN-Revision: 23903	2010-11-06 21:08:44 +00:00
Imre Kaloz	0a5da348d1	update kernels to 2.6.32.25 and 2.6.35.8 SVN-Revision: 23851	2010-11-04 09:01:08 +00:00
Florian Fainelli	ffc84cf75c	register uart driver on livebox (#8013 ) SVN-Revision: 23653	2010-10-27 10:02:13 +00:00
Florian Fainelli	7bf5647070	refresh 2.6.35 patches SVN-Revision: 23652	2010-10-27 10:02:08 +00:00
Claudio Mignanti	697d3e7066	Fix nxp_74hc164 driver compile error (builbot) SVN-Revision: 23623	2010-10-24 16:10:41 +00:00
Florian Fainelli	20d28f7685	fix platform_devices registration Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com> SVN-Revision: 23517	2010-10-18 19:49:54 +00:00
Florian Fainelli	af0e5167bc	add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558 ) SVN-Revision: 23508	2010-10-17 17:45:50 +00:00
Florian Fainelli	9d9e3fed62	remove 2.6.32 support SVN-Revision: 23505	2010-10-17 16:32:35 +00:00
Florian Fainelli	a1ea84dbb6	fix SPI driver, move register out of driver code Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com SVN-Revision: 23504	2010-10-17 14:09:30 +00:00
Florian Fainelli	1a13c39f76	restore kernel oldconfig Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23503	2010-10-17 14:09:24 +00:00
Florian Fainelli	265bf2ccb0	refresh patches Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23502	2010-10-17 14:09:04 +00:00
Florian Fainelli	9f4c51acb7	refresh nb4 support. Register 74x164 device Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23501	2010-10-17 14:08:57 +00:00
Florian Fainelli	8cbd9d5a2e	add spi devices board info int bcm63xx_boards Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23500	2010-10-17 14:08:51 +00:00
Florian Fainelli	b65e494976	add 74x164 SPI chip support Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23499	2010-10-17 14:08:45 +00:00
Florian Fainelli	cd9b90235c	backport SPI master with no RXTX support (from 2.6.36) Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23498	2010-10-17 14:08:39 +00:00
Florian Fainelli	d5854cfd4d	register earlier extended platform devices Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23497	2010-10-17 14:08:34 +00:00
Lars-Peter Clausen	83d6a36019	update 2.6.35.x to 2.6.35.7 SVN-Revision: 23213	2010-10-04 07:42:32 +00:00
Florian Fainelli	bbca651e1b	remove wpa-supplicant and iw from the Tecom GW6x00 profile SVN-Revision: 23051	2010-09-13 08:30:35 +00:00
Florian Fainelli	d3e206ad96	default to using 2.6.35 SVN-Revision: 23038	2010-09-12 21:23:53 +00:00
Florian Fainelli	dc1302fdf9	remove 2.6.33 support SVN-Revision: 23037	2010-09-12 21:23:47 +00:00
Florian Fainelli	327ac42dca	change the Tecom GW6x00 profile to use wl instead of b43 SVN-Revision: 23036	2010-09-12 21:23:41 +00:00
Florian Fainelli	f4f789f211	register udc and spi devices at the correct init level SVN-Revision: 23035	2010-09-12 21:23:35 +00:00
Florian Fainelli	fab2e77357	refresh 2.6.35 patches SVN-Revision: 23034	2010-09-12 21:23:29 +00:00
Jo-Philipp Wich	867ac59ff9	enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx SVN-Revision: 22846	2010-08-30 22:59:20 +00:00
Florian Fainelli	2e343d9760	add 2.6.35 support SVN-Revision: 22800	2010-08-25 19:56:08 +00:00
Florian Fainelli	b1becffa5b	update to 2.6.32.20 SVN-Revision: 22766	2010-08-22 17:07:37 +00:00
Daniel Dickinson	a5fdf57a1b	base-files: diag.sh: For power button as preinit status led, end with led left on, not off SVN-Revision: 22466	2010-08-02 19:33:08 +00:00
Daniel Dickinson	d391ca2c8c	base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit SVN-Revision: 22465	2010-08-02 19:32:59 +00:00
Daniel Dickinson	99d0f9ea05	patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32 SVN-Revision: 22464	2010-08-02 19:32:40 +00:00
Jo-Philipp Wich	00cc52f14b	reorder profiles SVN-Revision: 22390	2010-07-26 18:58:35 +00:00
Jo-Philipp Wich	7831006360	fix a typo in 040-bcm963xx_flashmap.patch SVN-Revision: 22386	2010-07-25 00:10:37 +00:00
Imre Kaloz	ca8f45b142	update kernel versions SVN-Revision: 22289	2010-07-19 11:34:03 +00:00
Florian Fainelli	f6935a4bdb	fix alice gate2 internet:green led (#6743 ) SVN-Revision: 22273	2010-07-18 10:29:44 +00:00
Jo-Philipp Wich	abdf25b045	add required exports for wl.ko SVN-Revision: 22174	2010-07-13 17:03:56 +00:00
Claudio Mignanti	2d86ea7bf3	massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 SVN-Revision: 22145	2010-07-12 14:06:13 +00:00
Jo-Philipp Wich	1650f33f97	add a wifi profile for proprietary wl SVN-Revision: 22009	2010-07-01 01:39:04 +00:00
Florian Fainelli	fb94196462	add missing alice gate2 leds (#6743 ) SVN-Revision: 21785	2010-06-13 12:20:53 +00:00
Florian Fainelli	145fd381d7	do not override cfg80211-related config symbols SVN-Revision: 21769	2010-06-12 18:10:16 +00:00
Gabor Juhos	9bc1e548a1	generic: move more common options to generic configuration * CONFIG_ABX500_CORE * CONFIG_ATOMIC64_SELFTEST * CONFIG_BRIDGE_IGMP_SNOOPING * CONFIG_CAIF * CONFIG_CEPH_FS * CONFIG_CRYSTALHD * CONFIG_DEFAULT_SECURITY_SELINUX * CONFIG_DEFAULT_SECURITY_SMACK * CONFIG_DEFAULT_SECURITY_TOMOYO * CONFIG_DT3155 * CONFIG_IP_MROUTE_MULTIPLE_TABLES * CONFIG_L2TP * CONFIG_LOGFS * CONFIG_LPC_SCH * CONFIG_MFD_JANZ_CMODIO * CONFIG_MFD_RDC321X * CONFIG_N_GSM * CONFIG_RAMOOPS * CONFIG_SERIAL_ALTERA_JTAGUART * CONFIG_SERIAL_ALTERA_UART * CONFIG_SERIAL_TIMBERDALE * CONFIG_SM_FTL * CONFIG_SQUASHFS_XATTRS SVN-Revision: 21750	2010-06-10 10:45:51 +00:00
Gabor Juhos	2f328ce488	generic: move some common symbols to generic configuration * CONFIG_MUTEX_SPIN_ON_OWNER * CONFIG_DEFAULT_HYDLA * CONFIG_DEFAULT_VENO SVN-Revision: 21748	2010-06-10 08:58:14 +00:00
Gabor Juhos	5cad9d5c73	generic: standardize CONFIG_INLINE_* symbols usage SVN-Revision: 21746	2010-06-10 08:09:41 +00:00
Daniel Dickinson	f296eeab53	brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design) SVN-Revision: 21631	2010-05-30 02:04:56 +00:00
Daniel Dickinson	6a267cfa76	brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods SVN-Revision: 21630	2010-05-30 01:44:37 +00:00
Daniel Dickinson	40c53c6556	brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00) SVN-Revision: 21629	2010-05-30 01:33:20 +00:00
Daniel Dickinson	82edb6eafa	brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00) SVN-Revision: 21628	2010-05-30 01:33:09 +00:00
Daniel Dickinson	cc8fba8441	brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00) SVN-Revision: 21627	2010-05-30 01:32:58 +00:00
Daniel Dickinson	bd8cfa63f4	brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) SVN-Revision: 21626	2010-05-30 01:32:47 +00:00
Nicolas Thill	e74e289fa8	update linux kernel to 2.6.32.14 SVN-Revision: 21583	2010-05-27 18:09:09 +00:00
Nicolas Thill	46e2eea1ef	target/linux: refresh 2.6.32 patches SVN-Revision: 21566	2010-05-24 20:35:46 +00:00
Hauke Mehrtens	b18a1d217b	kernel: update kernel to version 2.6.32.13 and 2.6.33.4 SVN-Revision: 21540	2010-05-23 13:16:51 +00:00
Florian Fainelli	f89ff525ee	revert r21085, fixes #7282 SVN-Revision: 21352	2010-05-04 08:07:39 +00:00
Florian Fainelli	1017215649	do not write to per-port over-current register, which is bogus (#6898 ) SVN-Revision: 21306	2010-05-02 19:14:10 +00:00
Raphaël Huck	f87eac79bb	rename reset_buttons to buttons SVN-Revision: 21255	2010-04-29 12:54:24 +00:00
Raphaël Huck	ccfe1f7886	add WPS button support for nb4 boards SVN-Revision: 21254	2010-04-29 12:51:41 +00:00
Raphaël Huck	b29ef93886	fix gpio button key code, match button-hotplug code SVN-Revision: 21253	2010-04-29 12:51:02 +00:00
Raphaël Huck	5af6e7724b	fix gpio_button device register SVN-Revision: 21252	2010-04-29 12:50:09 +00:00
Raphaël Huck	73e450f44a	fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel SVN-Revision: 21231	2010-04-28 12:30:32 +00:00
Raphaël Huck	1a07f81239	extend bcm63xx_wdt driver for debugging purposes, thx Miguel SVN-Revision: 21199	2010-04-27 15:45:03 +00:00
Alexandros C. Couloumbis	fdac9ae836	sync to kernel 2.6.32.12 SVN-Revision: 21195	2010-04-27 14:30:08 +00:00
Raphaël Huck	8df378a918	add neufbox 4 board support, thx Miguel & Florian SVN-Revision: 21193	2010-04-27 13:49:31 +00:00
Raphaël Huck	266c0bf900	add NXP 74HC164 chip driver support, thx Miguel & Florian SVN-Revision: 21192	2010-04-27 13:48:26 +00:00
Raphaël Huck	cf1654354b	add extended platform devices patch, thx Miguel & Florian SVN-Revision: 21191	2010-04-27 13:46:22 +00:00
Florian Fainelli	d15e136deb	fix spi chip select configuration SVN-Revision: 21164	2010-04-26 13:33:48 +00:00
Florian Fainelli	84dd37d930	fix bcm6358 spi base register address (#7234 ) SVN-Revision: 21163	2010-04-26 09:22:27 +00:00
Florian Fainelli	52231f694d	the SPI_CMD register is 16-bits wide SVN-Revision: 21162	2010-04-26 09:22:23 +00:00
Nicolas Thill	b1b2b04639	package/kernel: move PCMCIA modules to their own file & submenu SVN-Revision: 21136	2010-04-24 13:53:31 +00:00
Nicolas Thill	484051d055	package/kernel: move target specific modules to their own target files SVN-Revision: 21132	2010-04-24 13:34:51 +00:00
Florian Fainelli	2bab1a43be	register spi controller, remove whitespaces SVN-Revision: 21096	2010-04-22 16:35:49 +00:00
Florian Fainelli	6b423d5ecb	resync 2.6.33 mtd patch with the one for 2.6.32 SVN-Revision: 21095	2010-04-22 16:35:44 +00:00
Florian Fainelli	41836b16bb	fix wrong refresh on flashmap patch SVN-Revision: 21094	2010-04-22 16:35:01 +00:00
Florian Fainelli	ca3e07d639	re-instate SPI support SVN-Revision: 21087	2010-04-22 15:27:51 +00:00
Florian Fainelli	0b47141194	refresh 2.6.32 patches SVN-Revision: 21086	2010-04-22 15:27:46 +00:00
Florian Fainelli	be2a5389e6	alwasy read imagetag with 64K erase block size SVN-Revision: 21085	2010-04-22 15:27:42 +00:00
Gabor Juhos	81062a12ac	kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels SVN-Revision: 21081	2010-04-22 07:12:09 +00:00
Daniel Dickinson	fe5d55977e	tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120 SVN-Revision: 20850	2010-04-14 00:45:48 +00:00
Nicolas Thill	e2b57ecf5f	define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files SVN-Revision: 20834	2010-04-12 23:15:56 +00:00
Florian Fainelli	b87e590b24	do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338 SVN-Revision: 20765	2010-04-09 18:43:36 +00:00
Florian Fainelli	2a4fb82289	flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652	2010-04-01 21:20:43 +00:00
Florian Fainelli	dad85cddac	move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it SVN-Revision: 20548	2010-03-28 18:11:06 +00:00
Gabor Juhos	e66a368bd1	kernel: update to 2.6.32.10 SVN-Revision: 20444	2010-03-26 10:45:25 +00:00
Florian Fainelli	10d4e5b4b0	drop support for 2.6.30 kernel SVN-Revision: 20438	2010-03-26 10:12:48 +00:00
Florian Fainelli	928dfc550f	add support for D4PW board, patch from mexit SVN-Revision: 20420	2010-03-25 12:06:01 +00:00
Florian Fainelli	f2e91995ea	refresh 2.6.32 patches, fix livebox support (#6821 ) SVN-Revision: 20204	2010-03-14 16:21:28 +00:00
Nicolas Thill	e1863691d9	do not enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370]) SVN-Revision: 20136	2010-03-11 09:50:11 +00:00
Florian Fainelli	2c13d45b29	do not register devices in device_initcall level, this breaks the SSB SPROM registration SVN-Revision: 19957	2010-03-02 21:49:37 +00:00
Florian Fainelli	0cd5b9983f	remove mail headers from patches SVN-Revision: 19935	2010-03-01 14:55:34 +00:00
Florian Fainelli	4f4066d3e0	add support for 2.6.33 SVN-Revision: 19921	2010-02-28 21:24:34 +00:00
Florian Fainelli	984ac762e4	add support for 2.6.32, dropped the SPI patch for now SVN-Revision: 19919	2010-02-28 20:50:51 +00:00
Florian Fainelli	ada5848ba6	build images for RG100A (bcm6358-based boards) (#6755 ) SVN-Revision: 19894	2010-02-28 11:09:39 +00:00
Florian Fainelli	12a2f9b7b8	fix gpio-leds registration for boards having less than 8 LEDs (#6528 ) SVN-Revision: 19793	2010-02-21 14:27:17 +00:00
Florian Fainelli	8a1f7817d1	fix the receiving of packets with a 1500 mtu and vlan enabled (#6698 ) SVN-Revision: 19753	2010-02-19 11:56:13 +00:00
Imre Kaloz	825b37cc56	clean up handling of some kernel symbols SVN-Revision: 19581	2010-02-11 09:33:16 +00:00
Florian Fainelli	e716256d86	fix printing of mtd offsets, remove whitespaces. SVN-Revision: 19475	2010-01-31 21:37:25 +00:00
Florian Fainelli	b8d99458ff	move files to files-2.6.30, to ease newer kernel integration SVN-Revision: 19471	2010-01-31 21:00:50 +00:00
Daniel Dickinson	022594b0ed	brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261 SVN-Revision: 19361	2010-01-28 16:54:00 +00:00
Felix Fietkau	2aa0d20756	replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images SVN-Revision: 19293	2010-01-23 17:21:18 +00:00
Daniel Dickinson	f623119680	Fix typo in AGPF_S0 reset button definition SVN-Revision: 19160	2010-01-16 03:13:56 +00:00
Claudio Mignanti	b031e14bf0	bcm63xx: add gpio leds to alice gate SVN-Revision: 19152	2010-01-15 13:30:46 +00:00
Florian Fainelli	a47b8566a1	update to 2.6.30, refresh patches SVN-Revision: 18635	2009-12-04 14:52:45 +00:00
Felix Fietkau	fa0396c530	kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config SVN-Revision: 18603	2009-11-29 14:31:55 +00:00
Florian Fainelli	0adbdf6409	add support for the RTA1025W_16 board (#5979 ) SVN-Revision: 18476	2009-11-22 14:53:20 +00:00
Imre Kaloz	6b280112f2	some more Kconfig symbol move.. SVN-Revision: 18371	2009-11-11 11:52:41 +00:00
Imre Kaloz	1d62d9a95c	another round of kernel config cleanups SVN-Revision: 18370	2009-11-11 11:42:24 +00:00
Imre Kaloz	ef42fb4c13	sort all target config files SVN-Revision: 18367	2009-11-11 09:27:13 +00:00
Florian Fainelli	e9a02ff509	merge upstream fixes on mdio loop SVN-Revision: 18335	2009-11-07 12:48:17 +00:00
Florian Fainelli	9a84de9e01	images without tagid now fallback to the untouched partition layout (#6093 ) SVN-Revision: 18288	2009-11-03 19:59:04 +00:00
Florian Fainelli	5e7b871d8a	remove no longer used configs and patches SVN-Revision: 18221	2009-10-30 09:55:53 +00:00
Florian Fainelli	411d1ba1bb	do not generate trx images, this is useless SVN-Revision: 18204	2009-10-29 13:39:29 +00:00
Florian Fainelli	338490bd50	remove 2.6.28 support, we never really used it SVN-Revision: 18156	2009-10-25 21:13:46 +00:00
Florian Fainelli	7100c1efd9	switch to 2.6.30.9 SVN-Revision: 18155	2009-10-25 21:10:53 +00:00
Florian Fainelli	46c66bba36	update to 2.6.27.35 SVN-Revision: 18125	2009-10-23 09:12:17 +00:00
Nicolas Thill	f22156bf9e	brcm63xx: fix cardbus support with BCM6358 (closes: #5918 ) SVN-Revision: 17935	2009-10-05 20:40:05 +00:00
Andy Boyett	c85a89348f	move IMAGE_CMDLINE_HACK default to generic from targets SVN-Revision: 17905	2009-10-05 17:05:34 +00:00
Imre Kaloz	85fcc97a13	update to latest 2.6.27 and 2.6.30 kernels SVN-Revision: 17602	2009-09-17 11:22:33 +00:00
Florian Fainelli	031e6f65ba	update to 2.6.27.33 SVN-Revision: 17569	2009-09-11 07:45:08 +00:00
Gabor Juhos	47c0d7419f	kernel: get rid of the simple_prom_emulator, it is not really useful SVN-Revision: 17567	2009-09-10 18:30:20 +00:00
Gabor Juhos	d59f5b3a98	kernel: add generic image_cmdline hack to MIPS targets SVN-Revision: 17563	2009-09-10 18:30:01 +00:00
Florian Fainelli	43d0be69d7	update to 2.6.27.32 SVN-Revision: 17548	2009-09-09 07:13:09 +00:00
Florian Fainelli	b9c0291e32	prevent gpio-buttons registration failure SVN-Revision: 17542	2009-09-08 15:24:06 +00:00
Florian Fainelli	8ceff55a08	fix typos against the gpio buttons driver (#5804 ) SVN-Revision: 17538	2009-09-07 18:17:45 +00:00
Florian Fainelli	65fa1debda	add infrastructure to register gpio-input reset button SVN-Revision: 17526	2009-09-06 13:54:17 +00:00
Florian Fainelli	294ec33e47	fix reboot hang on bcm6345, thanks AndyI SVN-Revision: 17465	2009-09-02 08:32:00 +00:00
Florian Fainelli	63b86723b1	switch to 2.6.27.30 SVN-Revision: 17291	2009-08-17 09:17:06 +00:00
Florian Fainelli	3fd180eb53	add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA SVN-Revision: 17234	2009-08-12 08:41:47 +00:00
Florian Fainelli	7610c78205	fix typo, INT_MASK is writable, INT_STATUS is not SVN-Revision: 17229	2009-08-11 18:57:04 +00:00
Florian Fainelli	dd8b0f9fb9	more bcm63xx definition fixes, thanks AndyI SVN-Revision: 17227	2009-08-11 18:50:07 +00:00
Florian Fainelli	85698765da	add support for the Pirelli AG226G board (#5337 ) SVN-Revision: 17190	2009-08-09 10:19:47 +00:00
Florian Fainelli	2d629e3a01	remove useless hard reset in the SPI controller driver SVN-Revision: 17189	2009-08-09 10:18:30 +00:00
Florian Fainelli	2437f53f1d	fix assignment instead of comparison in the mtd driver (#5649 ) SVN-Revision: 17188	2009-08-09 10:08:07 +00:00
Florian Fainelli	8866ab8a02	merge upstream fixes for bcm63xx_enet SVN-Revision: 17175	2009-08-08 11:25:36 +00:00
Florian Fainelli	5138aa203e	bcm6345 fixes from AndyI SVN-Revision: 17153	2009-08-06 20:33:42 +00:00
Florian Fainelli	48c1634d3e	fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI SVN-Revision: 17149	2009-08-06 18:53:44 +00:00
Florian Fainelli	dd78f746a5	disable watchdog for bcm6345 until it gets fixed SVN-Revision: 17148	2009-08-06 18:44:20 +00:00
Florian Fainelli	39c22483bd	fix printing of offsets SVN-Revision: 17099	2009-08-02 13:50:39 +00:00
Florian Fainelli	85119470d2	add experimental support for 2.6.30.4 SVN-Revision: 17081	2009-08-01 16:56:36 +00:00
Florian Fainelli	e58d0f346d	more bcm6345 fixes and definitions, thanks to AndyI SVN-Revision: 17066	2009-07-31 20:15:43 +00:00
Florian Fainelli	c5879ba76d	refresh 2.6.27 patches SVN-Revision: 17061	2009-07-31 11:10:20 +00:00
Florian Fainelli	252607a79c	update to 2.6.27.29 SVN-Revision: 17060	2009-07-31 11:09:27 +00:00
Florian Fainelli	dd622864e1	generate images for RTA1025W_16-based routers (#5594 ) SVN-Revision: 17058	2009-07-31 10:47:00 +00:00
Florian Fainelli	9887dc6100	add experimental support for 2.6.28.10, tested on bcm6338 SVN-Revision: 17054	2009-07-30 21:29:25 +00:00
Florian Fainelli	3c806e767e	enable 6345 support now that it boots up to user-space SVN-Revision: 17033	2009-07-27 23:04:58 +00:00
Florian Fainelli	dabf5e71a6	fix typo for the flash start address on bcm6345 SVN-Revision: 17032	2009-07-27 22:31:28 +00:00
Florian Fainelli	103c99b960	switch to 2.6.27.28 SVN-Revision: 17027	2009-07-27 10:01:33 +00:00
Florian Fainelli	4d38620058	fix malformed patch SVN-Revision: 16975	2009-07-25 16:18:02 +00:00
Florian Fainelli	755aae526a	bcm6345 does not seem to handle r4k_wait correctly, disable it (#5474 ) SVN-Revision: 16971	2009-07-24 20:25:31 +00:00
Florian Fainelli	c4d517c7bb	use 2.6.27.7 SVN-Revision: 16968	2009-07-24 17:03:03 +00:00
Florian Fainelli	5df0606265	fix typos introduced in 16942 SVN-Revision: 16943	2009-07-21 12:22:01 +00:00
Florian Fainelli	8b17c74376	make the ethernet driver compile with newer kernels SVN-Revision: 16942	2009-07-21 11:48:08 +00:00
Florian Fainelli	43a3f9555a	request irq with the platform driver name instead of bus_id which is being removed in newer kernels SVN-Revision: 16932	2009-07-20 10:52:08 +00:00
Florian Fainelli	a0a85ba7c6	we are using the default-on trigger for power LEDs, no need to change their state from userspace SVN-Revision: 16892	2009-07-18 09:27:33 +00:00
Florian Fainelli	ecad504c39	register GPIO-connected LEDs for known boards SVN-Revision: 16887	2009-07-18 00:40:23 +00:00
Florian Fainelli	fe05e1f37a	mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implement it at all, fixes usb 2.0 issues on bcm6358 SVN-Revision: 16882	2009-07-17 15:58:06 +00:00
Florian Fainelli	d0fdf2c5ed	fix comment only valid for bcm6345 SVN-Revision: 16881	2009-07-17 15:57:09 +00:00
Florian Fainelli	349d57eee4	resync kernel configuration and enable kexec SVN-Revision: 16795	2009-07-12 11:31:00 +00:00
Florian Fainelli	9d2522748f	add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big SVN-Revision: 16709	2009-07-06 11:28:34 +00:00
Florian Fainelli	9a387036d2	add a profile with no Wi-Fi drivers enabled, useful for bcm6338 SVN-Revision: 16708	2009-07-06 11:21:22 +00:00
Florian Fainelli	fefeecf52f	update to latest 2.6.27.26 stable kernel SVN-Revision: 16659	2009-07-03 09:31:52 +00:00
Florian Fainelli	0bda624fc7	add the infrastructure to use a MPI/GPIO connected VoIP DSP SVN-Revision: 16650	2009-07-01 21:00:41 +00:00
Florian Fainelli	8a8943671a	fixes for the bcm6338 clocks, thanks Maxime SVN-Revision: 16640	2009-07-01 13:49:20 +00:00
Florian Fainelli	5a7c5b2d36	a couple of more fixes to get 6345 booting up to the console handover SVN-Revision: 16636	2009-06-30 13:45:49 +00:00
Florian Fainelli	8179904540	shared DMA zone is twice smaller on 6338 SVN-Revision: 16608	2009-06-28 20:06:44 +00:00
Florian Fainelli	e6d307ab4b	turn on size optimization for bcm63xx SVN-Revision: 16607	2009-06-28 20:06:13 +00:00
Florian Fainelli	4096da301d	off-by-one gpio numbers for bcm6338 SVN-Revision: 16597	2009-06-28 04:23:11 +00:00
Florian Fainelli	8813961e86	bcm6338 can support PCI since it has MPI SVN-Revision: 16592	2009-06-27 21:43:55 +00:00
Florian Fainelli	ca5de76ed3	more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly SVN-Revision: 16589	2009-06-27 20:32:43 +00:00
Florian Fainelli	d02d75ba02	fix the flash address comment and register the flash device again with its proper physical address on 6338/6345 SVN-Revision: 16587	2009-06-27 18:58:00 +00:00
Florian Fainelli	0bb3a46217	fix a stupid typo preventing the board from being detected SVN-Revision: 16586	2009-06-27 18:30:45 +00:00
Florian Fainelli	bcc1dd7f99	prevent bcm6338 and bcm6345 from crashing very early SVN-Revision: 16585	2009-06-27 18:23:58 +00:00
Florian Fainelli	7da8855c79	only register fallback sprom and enable PCI if we actually have support for PCI SVN-Revision: 16581	2009-06-27 16:17:18 +00:00
Florian Fainelli	bf0942ce5c	do not bloat the kernel with experimental bcm6345 for now SVN-Revision: 16580	2009-06-27 15:52:03 +00:00
Florian Fainelli	13a8ed9ca0	more missing register definitions for bcm6338 SVN-Revision: 16579	2009-06-27 15:51:27 +00:00
Florian Fainelli	287a2c0ba9	more bcm6338 and bcm6345 related fixes SVN-Revision: 16568	2009-06-26 12:34:35 +00:00
Florian Fainelli	8c4137900c	define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338 SVN-Revision: 16567	2009-06-26 11:08:12 +00:00
Florian Fainelli	45c25ff988	generate images for the bcm6338w SVN-Revision: 16566	2009-06-26 10:27:37 +00:00
Florian Fainelli	e86e91380a	add board definitions for the bcm6338w SVN-Revision: 16565	2009-06-26 10:27:13 +00:00
Florian Fainelli	1795111337	add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364 ) SVN-Revision: 16506	2009-06-18 15:00:32 +00:00
Florian Fainelli	606193fc1f	generate experimental images for bcm6338 boards, thanks to Daniel Dickinson SVN-Revision: 16490	2009-06-17 13:16:59 +00:00
Florian Fainelli	a68fe5655e	use 2.6.27.5 SVN-Revision: 16486	2009-06-17 08:46:47 +00:00
Imre Kaloz	c83b031b84	use the same i/o schedulers for all targets SVN-Revision: 16479	2009-06-15 20:43:02 +00:00
Florian Fainelli	cc12508ee3	use build system REVISION variable (#5317 ) SVN-Revision: 16400	2009-06-10 13:43:48 +00:00
Florian Fainelli	ca16accfbb	The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396	2009-06-10 08:24:13 +00:00
Florian Fainelli	e9c22f7939	cleanup the watchdog driver a bit SVN-Revision: 16395	2009-06-09 21:35:51 +00:00
Florian Fainelli	972619416e	fix the watchdog driver and enable it by default SVN-Revision: 16394	2009-06-09 21:28:15 +00:00
Florian Fainelli	01118457e8	rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987 ). SVN-Revision: 16393	2009-06-09 08:04:52 +00:00
Florian Fainelli	4f72fef05e	remove this line which got accidentaly succesfully applied, but should not have (#5285 ) SVN-Revision: 16380	2009-06-08 13:42:11 +00:00
Florian Fainelli	8f84508c25	fix ethernet driver removal SVN-Revision: 16335	2009-06-04 10:04:53 +00:00
Florian Fainelli	50936e1aa5	fix pcmcia device removal SVN-Revision: 16334	2009-06-04 10:04:11 +00:00
Florian Fainelli	116a53a154	add missing null entry in pcmcia driver SVN-Revision: 16333	2009-06-04 10:03:41 +00:00
Florian Fainelli	4049592268	request gpio pins and set direction correctly for pcmcia SVN-Revision: 16332	2009-06-04 10:03:03 +00:00
Florian Fainelli	287a0efd68	be SMP safe even with gpiolib SVN-Revision: 16331	2009-06-04 10:02:23 +00:00
Florian Fainelli	9013e936ed	cache gpio values in gpio_set SVN-Revision: 16330	2009-06-04 10:01:55 +00:00
Florian Fainelli	1208ffaedb	use the correct number of GPIOs for bcm6358 SVN-Revision: 16329	2009-06-04 10:01:03 +00:00
Florian Fainelli	c95420f06d	register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback SVN-Revision: 16328	2009-06-04 09:59:28 +00:00
Florian Fainelli	d2b2ce325a	merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU. This patch also fixes the reception of 802.1q frames for default MTU which were reported as oversized. SVN-Revision: 16302	2009-06-03 08:55:18 +00:00
Florian Fainelli	05b40c8d13	backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time SVN-Revision: 16277	2009-06-01 18:27:51 +00:00
Florian Fainelli	9be0df0caa	include wpa-supplicant iw in the default profile SVN-Revision: 16195	2009-05-29 15:33:14 +00:00
Florian Fainelli	027d6ac4c5	also include the SPI driver in the gw6x00 profile SVN-Revision: 16077	2009-05-26 11:15:27 +00:00
Florian Fainelli	a94930dbbb	include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking SVN-Revision: 16075	2009-05-26 10:25:55 +00:00
Florian Fainelli	fa45acd690	add the Tecom GW6x00 (6000 and 6200) board profile SVN-Revision: 16059	2009-05-25 16:14:13 +00:00
Florian Fainelli	f150bc5e36	update to new stable 2.6.27.24 SVN-Revision: 15931	2009-05-20 09:00:09 +00:00
Florian Fainelli	1322e2721a	disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211 SVN-Revision: 15926	2009-05-19 18:15:19 +00:00
Imre Kaloz	e965c02820	even more config file cleanup SVN-Revision: 15913	2009-05-18 13:21:25 +00:00
Florian Fainelli	ce87c61ae9	add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later SVN-Revision: 15911	2009-05-18 11:11:23 +00:00
Florian Fainelli	0d7f5f8d2c	add support for sysupgrade (#5117 ) SVN-Revision: 15900	2009-05-17 16:53:57 +00:00
Imre Kaloz	91e866f383	config cleanups SVN-Revision: 15861	2009-05-15 10:40:04 +00:00
Imre Kaloz	26b42d5807	cardbus != pcmcia -- disable it in b43 SVN-Revision: 15857	2009-05-15 08:58:02 +00:00
Florian Fainelli	480b27e9f9	add missing configuration symbol SVN-Revision: 15856	2009-05-15 07:04:32 +00:00
Imre Kaloz	6bfddb152f	some additional config file cleanup.. SVN-Revision: 15845	2009-05-14 13:32:34 +00:00
Imre Kaloz	c83d91fcfc	unify congestion control options SVN-Revision: 15844	2009-05-14 12:42:07 +00:00
Imre Kaloz	a9c958c2de	make kernels use /etc/preinit by default SVN-Revision: 15840	2009-05-14 10:20:53 +00:00
Florian Fainelli	01be18725f	also supports pcmcia SVN-Revision: 15693	2009-05-07 15:25:15 +00:00
Imre Kaloz	e9b397805d	some more kernel config cleanup.. last for today :) SVN-Revision: 15606	2009-05-04 20:57:02 +00:00
Imre Kaloz	0f2b1d070a	more cleanup SVN-Revision: 15605	2009-05-04 20:31:47 +00:00
Imre Kaloz	a614251e6c	cleanup MTD option handling SVN-Revision: 15602	2009-05-04 19:13:43 +00:00
Imre Kaloz	38c5311047	move MFD stuff to the generic kernel configs SVN-Revision: 15587	2009-05-04 13:51:29 +00:00
Imre Kaloz	64fbade939	refresh patches SVN-Revision: 15581	2009-05-04 11:35:08 +00:00
Imre Kaloz	86a4a6edb9	upgrade to newest stable kernel versions SVN-Revision: 15575	2009-05-03 16:58:06 +00:00
Florian Fainelli	a036aca55c	now that we register gpiodev, also include gpioctl in the default image SVN-Revision: 15510	2009-04-30 14:09:45 +00:00
Florian Fainelli	9485c3e834	register gpiodev SVN-Revision: 15509	2009-04-30 14:09:01 +00:00
Florian Fainelli	dd2b72105b	fix redundant driver name printing in probe function SVN-Revision: 15254	2009-04-19 13:32:54 +00:00
Florian Fainelli	1f334e3caa	make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909 , #4943 ) SVN-Revision: 15253	2009-04-19 13:18:48 +00:00
Felix Fietkau	34939cad39	get rid of $Id$ - it has never helped us and it has broken too many patches ;) SVN-Revision: 15242	2009-04-17 14:09:46 +00:00
Florian Fainelli	4bd65101ad	do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659 ) SVN-Revision: 15215	2009-04-12 12:54:38 +00:00
Florian Fainelli	14832d3c23	some more fixes to the SPI controller driver SVN-Revision: 15146	2009-04-08 08:52:57 +00:00
Florian Fainelli	5d5c8300b1	imagetag's -k argument is expected to be hexadecimal instead of decimal (#4885 ) SVN-Revision: 15133	2009-04-07 13:22:32 +00:00
Florian Fainelli	fb3fbea164	override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358 SVN-Revision: 15020	2009-03-24 15:22:07 +00:00
Hauke Mehrtens	f5dc2ce0aa	refresh patches SVN-Revision: 15018	2009-03-24 15:09:20 +00:00
Hauke Mehrtens	e82dce69a3	update to kernel version 2.6.27.21 SVN-Revision: 15016	2009-03-24 15:05:51 +00:00
Florian Fainelli	501ebb4f74	enable all blocks on 6338 and uart clock on 6345 SVN-Revision: 14957	2009-03-21 10:50:44 +00:00
Florian Fainelli	0972ee5331	add support for bcm6345 SoC, needs testing SVN-Revision: 14953	2009-03-20 15:08:02 +00:00
Florian Fainelli	32c29f1aaf	fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783 ) SVN-Revision: 14914	2009-03-17 11:28:54 +00:00
Florian Fainelli	b865f9b722	add the CFE offset command line option to the imagetag utility, closes (#4366 ) SVN-Revision: 14896	2009-03-16 12:29:11 +00:00
Florian Fainelli	6495fa36ea	add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 SVN-Revision: 14850	2009-03-12 08:54:04 +00:00
Florian Fainelli	8065eb4a55	do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers SVN-Revision: 14848	2009-03-11 10:32:44 +00:00
Florian Fainelli	51125fb616	make SPI work in full-duplex mode by default SVN-Revision: 14841	2009-03-10 15:28:29 +00:00
Florian Fainelli	add058c382	include kmod-switch in the default images SVN-Revision: 14827	2009-03-09 21:58:49 +00:00
Florian Fainelli	58a11bcb40	package the bcm63xx-spi driver SVN-Revision: 14794	2009-03-08 19:21:55 +00:00
Florian Fainelli	ae1ed9b7f4	add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing SVN-Revision: 14793	2009-03-08 15:27:46 +00:00
Florian Fainelli	871b0d6fed	fix SPI accessors SVN-Revision: 14792	2009-03-08 14:20:15 +00:00
Florian Fainelli	1bcf5d0de6	fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code SVN-Revision: 14790	2009-03-08 12:43:13 +00:00
Florian Fainelli	bf7f2939c2	compile and register SPI controller device SVN-Revision: 14789	2009-03-08 12:18:26 +00:00
Florian Fainelli	1e92d0355d	make bcm6358 consistend with the other boards naming SVN-Revision: 14788	2009-03-08 12:17:19 +00:00
Florian Fainelli	b1abddb45f	fix some SPI register definitions and platform-device registration code SVN-Revision: 14787	2009-03-08 12:13:52 +00:00
Florian Fainelli	5e8dfe53b6	prepare for SPI controller driver SVN-Revision: 14755	2009-03-06 01:15:00 +00:00
Florian Fainelli	9422b140ba	fix SPI register definitions SVN-Revision: 14754	2009-03-06 01:13:10 +00:00
Florian Fainelli	2d1ed46c68	fix a bcm963xx-flash warning SVN-Revision: 14730	2009-03-02 18:55:47 +00:00
Florian Fainelli	6f484fc283	provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__ SVN-Revision: 14683	2009-02-27 15:48:23 +00:00
Florian Fainelli	b539d11497	move the device registration to an earlier initcall level, required for fallback SPROM to work SVN-Revision: 14681	2009-02-27 15:18:34 +00:00
Felix Fietkau	11014b5cea	disable all kernel config options that are set to =m SVN-Revision: 14611	2009-02-22 04:44:24 +00:00
Hauke Mehrtens	3f085cd501	update to 2.6.28.7 and 2.6.27.19 SVN-Revision: 14601	2009-02-21 18:53:05 +00:00
Gabor Juhos	47665da430	update to 2.6.27.17 SVN-Revision: 14513	2009-02-15 07:47:12 +00:00
Florian Fainelli	eda8310293	always select kmod-ssb, pci is supported SVN-Revision: 14492	2009-02-13 00:13:39 +00:00
Florian Fainelli	99203ed0b1	do not overried 802.1q and PHY kernel configuration symbols SVN-Revision: 14468	2009-02-10 17:53:52 +00:00
Gabor Juhos	7f04c52b92	update to 2.6.27.15 SVN-Revision: 14440	2009-02-08 12:32:39 +00:00
Florian Fainelli	1fc20f18d4	resync kernel configuration SVN-Revision: 14395	2009-02-03 19:59:01 +00:00
Florian Fainelli	730346e2d5	add support for user9102 boards (#4537 ) SVN-Revision: 14305	2009-01-31 16:01:20 +00:00
Florian Fainelli	c2c0d74f67	generate images for old CFE based boards like the Davolink DV201 SVN-Revision: 14264	2009-01-29 14:56:45 +00:00
Florian Fainelli	d7cb033a04	Add board definitions for the Davolink DV201AMR SVN-Revision: 14263	2009-01-29 14:54:13 +00:00
Gabor Juhos	2a0825b4d3	update to 2.6.27.13 SVN-Revision: 14179	2009-01-25 18:33:19 +00:00
Gabor Juhos	0c2e187f54	switch to 2.6.27.12 SVN-Revision: 14157	2009-01-23 13:30:27 +00:00
Florian Fainelli	46b91ed787	frequency is in Hz, thanks Joel SVN-Revision: 14067	2009-01-17 15:29:36 +00:00
Florian Fainelli	5ce93c07a5	fix SPI register definitions SVN-Revision: 14048	2009-01-15 22:53:32 +00:00
Florian Fainelli	5905a48169	allow bcm6338 to get the base address of the memory controller register, required to detect memory size SVN-Revision: 14047	2009-01-15 22:42:22 +00:00
Gabor Juhos	3ca7f3bd6f	update to 2.6.27.11 SVN-Revision: 14043	2009-01-15 13:40:35 +00:00
Florian Fainelli	4c7d2cf90e	correct SPI register size SVN-Revision: 13886	2009-01-06 14:49:27 +00:00
Andy Boyett	9f8c82da09	Add hostapd-mini to default images where applicable SVN-Revision: 13819	2009-01-02 05:12:46 +00:00
Gabor Juhos	8395d01b59	update to 2.6.27.10 SVN-Revision: 13695	2008-12-19 19:25:35 +00:00
Florian Fainelli	85d59fbf8c	add board registration of the bcm96338gw SVN-Revision: 13693	2008-12-19 17:24:29 +00:00
Florian Fainelli	3f7137022d	6338 has no PCI SVN-Revision: 13692	2008-12-19 17:08:11 +00:00
Florian Fainelli	3dd67d64f4	add experimental support for bcm6338 SVN-Revision: 13691	2008-12-19 17:05:09 +00:00
Florian Fainelli	fa5a568380	Register watchdog driver SVN-Revision: 13690	2008-12-19 15:00:33 +00:00
Florian Fainelli	42ff43386a	fix register definitions for bcm6358, thanks SGDA SVN-Revision: 13688	2008-12-19 10:19:00 +00:00
Florian Fainelli	3ae3bf981e	resync kernel configuration SVN-Revision: 13687	2008-12-19 10:16:52 +00:00
Florian Fainelli	7ab973e1af	Add bcm63xx_wdt but do not enable it yet SVN-Revision: 13677	2008-12-17 14:06:03 +00:00
Gabor Juhos	e7336673b1	update to 2.6.27.9 and refresh patches SVN-Revision: 13659	2008-12-16 10:37:14 +00:00
Florian Fainelli	562ff99c2c	Build images for Inventel Livebox SVN-Revision: 13616	2008-12-12 15:16:57 +00:00
Florian Fainelli	34867901d0	Resync kernel config SVN-Revision: 13607	2008-12-11 23:16:54 +00:00
Florian Fainelli	4025c12a2d	Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348) SVN-Revision: 13588	2008-12-10 23:57:23 +00:00
Florian Fainelli	4dc65aed63	Add support for Sagem F@ST2404 (#4332 ) SVN-Revision: 13583	2008-12-10 16:13:41 +00:00
Florian Fainelli	5dc3098a6c	Disable CONFIG_NF_CT_ACCT SVN-Revision: 13577	2008-12-10 01:39:29 +00:00
Florian Fainelli	6acf4c2a19	Fix remaining bug of the off-by-one error ;) SVN-Revision: 13551	2008-12-08 21:00:00 +00:00
Florian Fainelli	fadddcc655	Enable ohci on bcm96348gw SVN-Revision: 13549	2008-12-08 16:25:41 +00:00
Florian Fainelli	47050e72be	Prepare bcm63xx for SPI master support SVN-Revision: 13547	2008-12-08 14:14:37 +00:00
Florian Fainelli	f3be50a031	Add support for bcm96348gw10 (Netgear DG834GT) (#4319 ) SVN-Revision: 13540	2008-12-07 20:34:48 +00:00
Gabor Juhos	4992a87aeb	update to 2.6.27.8 and refresh patches SVN-Revision: 13528	2008-12-06 09:59:55 +00:00
Gabor Juhos	919a8a9fe0	make mips_machine stuff available for other MIPS targets SVN-Revision: 13492	2008-12-02 21:54:53 +00:00
Florian Fainelli	01a5c953a3	Fix an off-by one printing error SVN-Revision: 13469	2008-12-02 14:11:54 +00:00
Florian Fainelli	043562037f	resync kernel config SVN-Revision: 13433	2008-11-29 16:33:07 +00:00
Florian Fainelli	e8aad7938a	Improve Inventel Livebox support SVN-Revision: 13427	2008-11-29 12:57:41 +00:00
Florian Fainelli	aa3c775b65	Reorder profiles numbering, broadcom being the most widely used SVN-Revision: 13401	2008-11-28 16:35:10 +00:00
Florian Fainelli	cc2e43992d	bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver SVN-Revision: 13379	2008-11-27 20:40:03 +00:00
Florian Fainelli	bbad86e098	Add missing config symbol for SSB SVN-Revision: 13378	2008-11-27 20:38:01 +00:00
Florian Fainelli	44108d6a2d	Commit changes on the files for gpiolib SVN-Revision: 13374	2008-11-27 10:38:36 +00:00
Florian Fainelli	36fc2d1f93	Convert brcm63xx to gpiolib SVN-Revision: 13373	2008-11-27 10:38:01 +00:00
Florian Fainelli	1c77ec0587	Flatten brcm63xx patches, should make our life easier to patch files now ;) SVN-Revision: 13368	2008-11-26 18:41:01 +00:00
Florian Fainelli	4fc7535fc7	Make 4-port LAN and 1 port wan configurations work SVN-Revision: 13362	2008-11-26 15:51:55 +00:00
Imre Kaloz	752054346a	update to 2.6.27.7 SVN-Revision: 13347	2008-11-25 13:54:46 +00:00
Imre Kaloz	a695fa76a4	move THERMAL symbols into the generic config SVN-Revision: 13346	2008-11-25 13:52:25 +00:00
Florian Fainelli	0f26e35e37	brcm63xx has pcmcia support and is able to run b43 on its pci bus SVN-Revision: 13303	2008-11-20 23:08:20 +00:00
Florian Fainelli	5acddecc68	Update brcm63xx broadcom profile now that b43 is available SVN-Revision: 13302	2008-11-20 23:01:48 +00:00
Florian Fainelli	8f5351a4f2	Synchroniz bcm63xx kernel configuration SVN-Revision: 13300	2008-11-20 22:16:48 +00:00
Florian Fainelli	e854a26332	Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail SVN-Revision: 13299	2008-11-20 21:26:11 +00:00
Florian Fainelli	107aa04e06	Generate valid images for the bcm96348gw board SVN-Revision: 13298	2008-11-20 21:22:45 +00:00
Imre Kaloz	722c78cd1e	move some options to the generic 2.6.27 config SVN-Revision: 13264	2008-11-17 17:28:12 +00:00
Imre Kaloz	7d09c0b086	update to 2.6.27.6 SVN-Revision: 13261	2008-11-17 17:22:30 +00:00
Florian Fainelli	0d4286b0b3	This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201 ) SVN-Revision: 13213	2008-11-15 11:30:22 +00:00
Florian Fainelli	cb126cd576	Package bcm63xx-pcmcia kernel module and fix compilation SVN-Revision: 13212	2008-11-15 11:26:23 +00:00
Florian Fainelli	9bbc37d26b	Remove old kernel configuration files SVN-Revision: 13211	2008-11-15 11:23:29 +00:00
Florian Fainelli	517e3d404c	Delete old brcm63xx files SVN-Revision: 13210	2008-11-15 11:21:42 +00:00
Gabor Juhos	88cda758c3	update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patch by Hauke Mehrtens * closes #4193 SVN-Revision: 13192	2008-11-12 17:49:01 +00:00
Nicolas Thill	0a11abc83d	add missing kconfig symbols for 2.6.27 targets when all modules are enabled SVN-Revision: 13178	2008-11-11 02:43:35 +00:00
Felix Fietkau	d0388bbe5c	brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition SVN-Revision: 13130	2008-11-06 12:52:39 +00:00
Florian Fainelli	7cedaafd0c	Add basic support for Inventel Liveboxes, resync kernel config SVN-Revision: 13108	2008-11-03 20:30:43 +00:00
Florian Fainelli	9aa1d64b91	Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken SVN-Revision: 13106	2008-11-03 18:52:58 +00:00
Florian Fainelli	aa90a702db	Use 2.6.27.4 kernel version SVN-Revision: 13055	2008-10-28 11:19:24 +00:00
Florian Fainelli	30d2200e7d	Update targets to 2.6.27.3 SVN-Revision: 13035	2008-10-23 09:11:10 +00:00
Florian Fainelli	28baca91fe	Update patches and rename board 9 stands for development board SVN-Revision: 13024	2008-10-22 09:20:51 +00:00
Florian Fainelli	691e187381	Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices SVN-Revision: 13015	2008-10-20 12:55:28 +00:00
Florian Fainelli	64c28032c8	New Broadcom BCM63xx codebase, huge thanks to Maxime ;) SVN-Revision: 13001	2008-10-17 22:53:56 +00:00
Florian Fainelli	5718709711	Fix reference to the old and replaced kmod-rt61 SVN-Revision: 12723	2008-09-27 10:47:00 +00:00
Gabor Juhos	821170133f	update to 2.6.26.5 and 2.6.25.17 SVN-Revision: 12718	2008-09-26 18:46:53 +00:00
Nicolas Thill	3029c2fd53	disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported SVN-Revision: 12690	2008-09-24 19:28:53 +00:00
Gabor Juhos	184c6b06f2	update to 2.6.26.3 and 2.6.25.16 SVN-Revision: 12371	2008-08-22 15:37:19 +00:00
Gabor Juhos	e5fa05d788	update to 2.6.25.15 and 2.6.26.2 SVN-Revision: 12242	2008-08-07 16:52:52 +00:00
Gabor Juhos	104b3386a2	update to 2.6.25.12 SVN-Revision: 11933	2008-07-26 10:53:23 +00:00
Imre Kaloz	492ba57b56	update targets to 2.6.25.10 SVN-Revision: 11667	2008-07-05 16:52:15 +00:00
Imre Kaloz	dee39d10ee	upgrade to 2.6.25.9 SVN-Revision: 11584	2008-06-26 14:28:16 +00:00
Gabor Juhos	4af6ac74fb	upgrade to 2.6.25.7, and refresh patches SVN-Revision: 11523	2008-06-17 12:57:04 +00:00
Imre Kaloz	2eb6751084	upgrade to 2.6.25.6 SVN-Revision: 11435	2008-06-11 11:38:39 +00:00
Florian Fainelli	6e0427c8a4	Add bcm3350 cpuid SVN-Revision: 11364	2008-06-05 16:19:46 +00:00
Gabor Juhos	c2619fb5ab	revert kernel version to 2.6.25.4 SVN-Revision: 11273	2008-05-27 06:27:16 +00:00
Gabor Juhos	ac897ce5b1	refresh kernel patches SVN-Revision: 11201	2008-05-19 08:33:22 +00:00
Gabor Juhos	f9719b35c8	upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19) SVN-Revision: 11184	2008-05-18 20:12:54 +00:00
Felix Fietkau	12da51bb3c	bcm96345: correct some 6345 specific stuff This fixes some problems with the 6345 support and adds a macro for CPU identification that is easier on the eyes. The first thing it does is to not initialize MPI on the 6345 as it does not have PCI. The second thing it does is to use a static value for the CPU frequency of the 6345 chip to provide an accurate timer. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11183	2008-05-18 17:32:16 +00:00
Felix Fietkau	ab2b78aabd	bcm963xx: fix cfe detection The CFE detection failed to account for zero termination. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11182	2008-05-18 17:32:05 +00:00
Felix Fietkau	be49888f6c	bcm963xx: add new timer code This basically selects the new generic MIPS timer code for BCM963xx and simplifies the timer setup code. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11181	2008-05-18 17:31:55 +00:00
Felix Fietkau	f92e4aaf53	bcm963xx: remove obsolete timer code This removes some code that has been deprecated in kernels >= 2.6.24. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11180	2008-05-18 17:31:45 +00:00
Felix Fietkau	4db60563fc	bcm963xx: fix uart isr The ISR ended up in an endless loop because the TX ISR never got used or masked. This patch basically makes the TX ISR mask the the TX interrupt when it encounters it, because it doesn't even use the TX interrupt. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11179	2008-05-18 17:31:35 +00:00
Felix Fietkau	ca851edf10	bcm963xx: rewrite irq handling code This patch adds interrupt handling as on AR7. The old code was very messy and didn't work too well. It also removes the unused file int-handler.S. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11178	2008-05-18 17:31:25 +00:00
Felix Fietkau	289c41604f	bcm963xx: add missing trailing zero to load address The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current sources. I think this is just a typo, so this patch fixes it (tested on 96345). Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11177	2008-05-18 17:31:11 +00:00
Felix Fietkau	17d20bb016	bcm963xx: flashmap support Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11176	2008-05-18 17:31:02 +00:00
Felix Fietkau	da18b98cff	bcm963xx: serial port support Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11175	2008-05-18 17:30:49 +00:00
Felix Fietkau	97b85443eb	bcm963xx: board support Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11174	2008-05-18 17:30:39 +00:00
Felix Fietkau	f94d5eafc9	bcm963xx: add 2.6.25 configuration file Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11173	2008-05-18 17:30:30 +00:00
Felix Fietkau	8e7ff7a673	bcm963xx: use the 2.6.25.1 kernel Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11172	2008-05-18 17:30:16 +00:00
Felix Fietkau	2dfabe3991	bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11171	2008-05-18 17:30:04 +00:00
Felix Fietkau	46b4413fbb	bcm963xx: fix load address / kernel entry Current kernels have the same kernel entry as load address, so just set them like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this too. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11169	2008-05-18 17:29:39 +00:00
Nicolas Thill	e3a42b23c6	enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate SVN-Revision: 11097	2008-05-09 17:08:51 +00:00
Imre Kaloz	68943e35c2	upgrade to 2.6.24.5 SVN-Revision: 10959	2008-04-28 10:23:36 +00:00
Nicolas Thill	c6fe45ed55	properly disable CONFIG_CRYPTO_HW SVN-Revision: 10952	2008-04-27 12:31:50 +00:00
Florian Fainelli	03f917f26c	Delete config-default file and resync kernel configuration for brcm63xx SVN-Revision: 10790	2008-04-11 14:22:41 +00:00
Florian Fainelli	62240465c4	brcm63xx image generation cleanups (#3169 ) SVN-Revision: 10703	2008-04-01 21:10:47 +00:00
Florian Fainelli	ebf4eb11e9	Upgrade brcm63xx to 2.6.24 SVN-Revision: 10455	2008-02-13 17:31:17 +00:00
Gabor Juhos	0a72d14e40	resync kernel config SVN-Revision: 10444	2008-02-11 15:28:45 +00:00
Imre Kaloz	3a0e58b2e1	upgrade & standardize kernel versions SVN-Revision: 10443	2008-02-11 10:50:40 +00:00
Felix Fietkau	3f7af01bb0	fix initramfs SVN-Revision: 10080	2008-01-01 21:38:06 +00:00
Felix Fietkau	1bca0cc517	make the image filenames a bit shorter SVN-Revision: 9533	2007-11-10 23:08:11 +00:00
Nicolas Thill	5f0272d618	move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs. SVN-Revision: 8980	2007-09-23 15:12:12 +00:00
Nicolas Thill	fec4d9ee3c	add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP (closes: #2297 , thanks to aorlinsk), sync 2.4 / 2.6 kconfigs. SVN-Revision: 8955	2007-09-22 18:37:24 +00:00
Felix Fietkau	236d7e62ca	clean up jffs2 config options SVN-Revision: 8848	2007-09-19 20:58:16 +00:00
Felix Fietkau	87a88cebc7	adapt profiles for subtarget changes SVN-Revision: 8695	2007-09-08 20:04:43 +00:00
Felix Fietkau	a9d683ca91	major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets SVN-Revision: 8694	2007-09-08 19:55:42 +00:00
Felix Fietkau	56231056ea	strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. SVN-Revision: 8653	2007-09-06 16:27:37 +00:00

... 12 13 14 15 16 ...

1161 Commits