provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__

SVN-Revision: 14683

target/linux/brcm63xx/Makefile

@@ -14,7 +14,7 @@ LINUX_VERSION:=2.6.27.19
 
 include $(INCLUDE_DIR)/target.mk
 
-DEFAULT_PACKAGES += hostapd-mini kmod-ssb
+DEFAULT_PACKAGES += hostapd-mini
 
 define Target/Description
 	Build firmware images for Broadcom based xDSL/routers

target/linux/brcm63xx/config-2.6.27

@@ -8,7 +8,6 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATM_DRIVERS=y
 CONFIG_AUDIT=y
 CONFIG_AUDIT_GENERIC=y
 CONFIG_BASE_SMALL=0
@@ -19,18 +18,14 @@ CONFIG_BCM63XX_CPU_6348=y
 CONFIG_BCM63XX_CPU_6358=y
 CONFIG_BCM63XX_ENET=y
 CONFIG_BCM63XX_PHY=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_BITREVERSE=y
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BOARD_BCM963XX=y
 # CONFIG_BOARD_LIVEBOX is not set
 # CONFIG_BSD_DISKLABEL is not set
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_CEVT_R4K=y
-# CONFIG_CIFS is not set
 CONFIG_CLASSIC_RCU=y
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_CPU_BIG_ENDIAN=y
@@ -63,6 +58,12 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_VR41XX is not set
 CONFIG_CRAMFS=y
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_MANAGER=m
 CONFIG_CSRC_R4K=y
 CONFIG_DEFAULT_BIC=y
 CONFIG_DEFAULT_CFQ=y
@@ -74,18 +75,10 @@ CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DUMMY is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_ELF_CORE=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 # CONFIG_FIXED_PHY is not set
-# CONFIG_FS_MBCACHE is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -121,13 +114,9 @@ CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_IOSCHED_CFQ=y
 # CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IP6_NF_RAW is not set
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_IP_SCTP is not set
 CONFIG_IRQ_CPU=y
 # CONFIG_ISDN is not set
 CONFIG_KMOD=y
@@ -136,7 +125,6 @@ CONFIG_LBD=y
 # CONFIG_LEDS_GPIO is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_LLC2 is not set
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -148,7 +136,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
 CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -208,19 +195,14 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_NATSEMI is not set
-CONFIG_NF_CT_ACCT=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCCARD_NONSTATIC is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_BCM63XX is not set
 # CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_PHYLIB=y
 # CONFIG_PMC_MSP is not set
@@ -232,17 +214,10 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_PROM_EMU is not set
 # CONFIG_R6040 is not set
 CONFIG_RELAY=y
-CONFIG_RFKILL_LEDS=y
 CONFIG_RTC_LIB=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_WAIT_SCAN is not set
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
@@ -258,18 +233,16 @@ CONFIG_SERIAL_BCM63XX_CONSOLE=y
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SOUND is not set
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SQUASHFS_EMBEDDED=y
 CONFIG_SQUASHFS_VMALLOC=y
-# CONFIG_SSB is not set
+CONFIG_SSB=y
 CONFIG_SSB_B43_PCI_BRIDGE=y
 CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB_SPROM=y
 CONFIG_SWAP_IO_SPACE=y
@@ -281,31 +254,15 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 # CONFIG_TC35815 is not set
 CONFIG_TCP_CONG_BIC=y
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
 CONFIG_TICK_ONESHOT=y
-# CONFIG_TIPC is not set
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_TRAD_SIGNALS=y
-# CONFIG_USB is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-# CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-# CONFIG_USB_SERIAL_CH341 is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_VIDEO_MEDIA is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_V4L2_COMMON is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_WAN_ROUTER is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_ZONE_DMA_FLAG=0

target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -13,6 +13,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/ssb/ssb.h>
 #include <asm/addrspace.h>
 #include <bcm63xx_board.h>
 #include <bcm63xx_cpu.h>
@@ -447,6 +448,31 @@ static struct platform_device mtd_dev = {
 	.num_resources		= ARRAY_SIZE(mtd_resources),
 };
 
+/*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+static struct ssb_sprom bcm63xx_sprom = {
+	.revision		= 0x02,
+	.board_rev		= 0x17,
+	.country_code		= 0x0,
+	.ant_available_bg 	= 0x3,
+	.pa0b0			= 0x15ae,
+	.pa0b1			= 0xfa85,
+	.pa0b2			= 0xfe8d,
+	.pa1b0			= 0xffff,
+	.pa1b1			= 0xffff,
+	.pa1b2			= 0xffff,
+	.gpio0			= 0xff,
+	.gpio1			= 0xff,
+	.gpio2			= 0xff,
+	.gpio3			= 0xff,
+	.maxpwr_bg		= 0x004c,
+	.itssi_bg		= 0x00,
+	.boardflags_lo		= 0x2848,
+	.boardflags_hi		= 0x0000,
+};
+
 /*
  * third stage init callback, register all board devices.
  */
@@ -474,6 +500,14 @@ int __init board_register_devices(void)
 	if (board.has_ehci0)
 		bcm63xx_ehci_register();
 
+	/* Generate MAC address for WLAN and
+	 * register our SPROM */
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+			printk(KERN_ERR "failed to register fallback SPROM\n");
+	}
 
 	/* read base address of boot chip select (0) */
 	val = bcm_mpi_readl(MPI_CSBASE_REG(0));