ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 08:21:14 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
62,478 Commits 9 Branches 76 Tags 921 MiB
92eb867873
Commit Graph

7 Commits

Author SHA1 Message Date
Paweł Owoc
9bdaebaff3 qualcommax: ipq807x: add support for Linksys MX8500 
Hardware specification:
========
SoC: Qualcomm IPQ8072A
Flash: 512MB (Fidelix FMND4G08S3J-ID)
RAM: 1GB (2x Kingston DDR3L D2516ECMDXGJD)
Ethernet: 1x 10/100/1000/2500/5000Mbps (Marvell AQR114C)
Ethernet: 4x 10/100/1000Mbps (Qualcomm QCA8075)
WiFi1: 6GHz ax 4x4 (Qualcomm QCN9024 + Skyworks SKY85784-11) - channels 33-229
WiFi2: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-177
WiFi3: 2.4GHz ax 4x4 (Qualcomm QCN5024 + Skyworks SKY8340-11)
IoT: Bluetooth 5, Zigbee and Thread (NXP K32W041)
LED: 1x RGB status (NXP PCA9633)
USB: 1x USB 3.0
Button: WPS, Reset

Flash instructions:
========
1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin image.
More details can be found here: https://www.linksys.com/support-article?articleNum=47547
After first boot check actual partition:
- fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
- mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin kernel
and in case of 1:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin alt_kernel

2. Installation using serial connection from OEM firmware (default login: root, password: admin):
- fw_printenv -n boot_part
In case of 2:
- flash_erase /dev/mtd21 0 0
- nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin
or in case of 1:
- flash_erase /dev/mtd23 0 0
- nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin
After first boot install firmware on second partition:
- mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin kernel
or:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin alt_kernel

3. Installation from initramfs image using USB drive:
Put the initramfs image on the USB drive:
- dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx8500-initramfs-uImage.itb of=/dev/sda
Stop u-boot and run:
- usb start && usbboot $loadaddr 0 && bootm $loadaddr
Write firmware to the flash from initramfs:
- mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin kernel
and:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin alt_kernel

4. Back to the OEM firmware:
- mtd -e kernel -n write FW_MX8500_1.0.11.208937_prod.img kernel
and:
- mtd -r -e alt_kernel -n write FW_MX8500_1.0.11.208937_prod.img alt_kernel

5. USB recovery:
Put the initramfs image on the USB:
- dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx8500-initramfs-uImage.itb of=/dev/sda
Set u-boot env:
- fw_setenv bootusb 'usb start && usbboot $loadaddr 0 && bootm $loadaddr'
- fw_setenv bootcmd 'run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi'

AQR firmware:
========
1. Firmware loading:
To properly load the firmware and initialize AQR PHY, we must use the u-boot aq_load_fw function.
To do this, you need to modify u-boot env:
With USB recovery:
- fw_setenv bootcmd 'aq_load_fw; run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi'
and without:
- fw_setenv bootcmd 'aq_load_fw; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi'

2. Firmware updating:
Newer firmware (AQR-G4_v5.6.5-AQR_WNC_SAQA-L2_GT_ID45287_VER24005.cld) is available in the latest OEM firmware.
To load this firmware via u-boot, we need to add the MBN header and update 0:ethphyfw partition.
For MBN header we can use script from this repository: https://github.com/testuser7/aqr_mbn_tool
- python aqr_mbn_tool.py AQR-G4_v5.6.5-AQR_WNC_SAQA-L2_GT_ID45287_VER24005.cld
To update partition we need to install kmod-mtd-rw package first:
- insmod mtd-rw.ko i_want_a_brick=1
- mtd -e /dev/mtd26 -n write aqr_fw.mbn /dev/mtd26

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14883
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-05-16 20:27:36 +02:00
Sean Khan
849ebc905b qualcommax: enhance smp_affinity (log, uci, syntax) 
1.) Changed logic of `set_affinity` to now use physical cores rather than
    knowing the bitmask. Rather than having to know a bitmask, users can
    provide a numerical instance of one or more CPU cores
    (numbered 0-63).

    This is done via function `cpus_to_bitmask`.

    Functions Added:

    a.) bitmask_to_cpus - Takes a bitmask of CPUs and returns a
         list of CPU numbers. (i.e. `bitmask_to_cpus "f"` -> 0,1,2,3)

    b.) cpus_to_bitmask - Takes a comma/space or range list of CPUs and returns
         a bitmask.

         Example:
         `cpus_to_bitmask "2,3"`     -> c
         `cpus_to_bitmask "0,1,2,3"` -> f
         `cpus_to_bitmask "1,3"`     -> a

         With or without quotes
         `cpus_to_bitmask "1 3"`     -> a
         `cpus_to_bitmask  1 3`      -> a

2.) Added UCI options:

    enable     - to enable/disable the script from running.   [default 1 (on)]
    enable_log - to enable/disable logging output to `logger`.[default 1 (on)]

    Log output:
```
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(87) reo2host-destination-ring1    to CPU 0
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(88) reo2host-destination-ring2    to CPU 1
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(89) reo2host-destination-ring3    to CPU 2
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(90) reo2host-destination-ring4    to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(79) wbm2host-tx-completions-ring1 to CPU 1
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(83) wbm2host-tx-completions-ring2 to CPU 2
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(85) wbm2host-tx-completions-ring3 to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(73) ppdu-end-interrupts-mac1      to CPU 1
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(77) ppdu-end-interrupts-mac2      to CPU 2
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(75) ppdu-end-interrupts-mac3      to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(32) edma_txcmpl                   to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(33) edma_rxfill                   to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(35) edma_rxdesc                   to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(36) edma_misc                     to CPU 3
```

    Output of `/proc/interrupts`:
```
 69:          0          0          0          0 GIC-0 209 Edge      rxdma2host-destination-ring-mac1
 70:          0          0          0          0 GIC-0 211 Edge      rxdma2host-destination-ring-mac3
 71:          0          0          0          0 GIC-0 210 Edge      rxdma2host-destination-ring-mac2
 72:       2435          0          0          0 GIC-0 321 Edge      reo2host-status
 73:     268427       8011          0          0 GIC-0 261 Edge      ppdu-end-interrupts-mac1
 74:          2          0          0          0 GIC-0 255 Edge      rxdma2host-monitor-status-ring-mac1
 75:     176169          0          4      10035 GIC-0 263 Edge      ppdu-end-interrupts-mac3
 76:          2          0          0          0 GIC-0 260 Edge      rxdma2host-monitor-status-ring-mac3
 77:          0          0          0          0 GIC-0 262 Edge      ppdu-end-interrupts-mac2
 78:          0          0          0          0 GIC-0 256 Edge      rxdma2host-monitor-status-ring-mac2
 79:       3428       3123          0          0 GIC-0 189 Edge      wbm2host-tx-completions-ring1
 80:          0          0          0          0 GIC-0 323 Edge      reo2ost-exception
 81:        178          0          0          0 GIC-0 322 Edge      wbm2host-rx-release
 82:          0          0          0          0 GIC-0 212 Edge      host2rxdma-host-buf-ring-mac1
 83:       6524          0      13712          0 GIC-0 190 Edge      wbm2host-tx-completions-ring2
 84:          4          0          0          0 GIC-0 235 Edge      host2rxdma-host-buf-ring-mac3
 85:        560          0          0       1979 GIC-0 191 Edge      wbm2host-tx-completions-ring3
 86:          0          0          0          0 GIC-0 215 Edge      host2rxdma-host-buf-ring-mac2
 87:       4520          0          0          0 GIC-0 267 Edge      reo2host-destination-ring1
 88:       2231       2811          0          0 GIC-0 268 Edge      reo2host-destination-ring2
 89:       2180          0       2512          0 GIC-0 271 Edge      reo2host-destination-ring3
 90:       1990          0          0       2321 GIC-0 320 Edge      reo2host-destination-ring4
```

3.) Added `uci-defaults` script `15_smp_affinity` to configure defaults
    options on first boot.

Signed-off-by: Sean Khan <datapronix@protonmail.com>
 2024-04-12 13:22:12 +02:00
Paweł Owoc
70fd815e57 qualcommax: ipq807x: add support for Linksys MX5300 
Hardware specification:
========
SoC: Qualcomm IPQ8072A
Flash: 512MB (Winbond W29N04GZBIBA)
RAM: 1GB (2x Nanya DDR3L NT5CC256M16ER-EK)
Ethernet: 5x 10/100/1000Mbps (Qualcomm QCA8075)
WiFi1: 5GHz ac 4x4 (Qualcomm QCA9984 + Skyworks SKY85746-11) - channels 100-169
WiFi2: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64
WiFi3: 2.4GHz ax 4x4 (Qualcomm QCN5024 + Skyworks SKY8340-11)
IoT: Bluetooth 5, Zigbee and Thread (Qualcomm QCA4024 + Skyworks SE2433T-R)
IoT Flash: 4MB (Macronix MX25R3235F)
RTC: ST M41T00S
LED: 1x RGB status (NXP PCA9633)
USB: 1x USB 3.0
Button: WPS, Reset

Flash instructions:
========
1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin image.
More details can be found here: https://www.linksys.com/hk/support-article?articleNum=274497
After first boot check actual partition:
- fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
- mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel
and in case of 1:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel

2. Installation using serial connection from OEM firmware (default login: root, password: admin):
- fw_printenv -n boot_part
In case of 2:
- flash_erase /dev/mtd21 0 0
  nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin
or in case of 1:
- flash_erase /dev/mtd23 0 0
  nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin
After first boot install firmware on second partition:
- mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel
or:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel

3. Installation from initramfs image using USB FAT32 formatted drive:
Stop u-boot and run:
- usb start && fatload usb 0:1 $loadaddr openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb && bootm $loadaddr
Write firmware to the flash from initramfs:
- mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel
and:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel

4. Back to the OEM firmware:
- mtd -e kernel -n write FW_MX5300_1.1.9.200251_prod.img kernel
and:
- mtd -r -e alt_kernel -n write FW_MX5300_1.1.9.200251_prod.img alt_kernel

5. USB recovery:
- fw_setenv usbimage 'openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb'
  fw_setenv bootusb 'usb start && fatload usb 0:1 $loadaddr $usbimage && bootm $loadaddr'
  fw_setenv bootcmd 'run bootusb; aq_load_fw && if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi'

Notes:
========
IoT device is accesible over spi. Not yet supported.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
 2024-02-23 13:34:59 +01:00
Robert Marko
ad25cfb6b8
qualcommax: add SMP affinity script 
By default Linux will default to most IRQ-s being mapped to core 0 which
during high loads will completely swamp the core 0, so lets add the widely
used script that has been floating around forums for a long time to try and
optimize the IRQ mapping a bit.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-01-22 15:37:11 +01:00
Mohammad Sayful Islam
46a2490e8f ipq807x: add support for Linksys MX4200 V1 and V2 
Linksys MX4200 is a 802.11ax Tri-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz
* RAM: 512MB of DDR3
* Storage: 512Mb NAND
* Ethernet: 4x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
	* 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
* LED-s:
	* RGB system led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition
fw_printenv -n boot_part

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel

Replace (X) with your model version either 1 or 2

Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
 2024-01-06 16:13:23 +01:00
Isaev Ruslan
3763a6a075
ipq807x: add support for Yuncore AX880 
SPECIFICATION:
    - Chipset:  IPQ8072A +QCN5054+QCN5024+QCA8081*2
    - Flash NOR-8MB AND NAND-128MB
    - RAM 1Gb DDR
    - IEEE 802.11:  802.11ax/ac/b/g/n
    - 4*4 2.4G Wi-Fi standard   802.11b/g/n/ax
    - 4*4 5.8G Wi-Fi Standard   802.11 a/n/ac/ax
    - 2x 1 Gbps Ethernet (QCA8081) with 802.3at PoE input support
    - 1x  Reset
    - 1x  Bluetooth(optional)
    - 1x  DC Port 12V 3A
    - 4x Antenna    IPEX Connector, 3dBi omni antennas
    - Data Rate:    3657Mbps ( 2.4G: 1182Mbps (11ax 4x4); 5.8G: 2475Mbps (11ax 4x4))
    - RF Power: 2.4g ≤ 20dBm; 5.8g ≤ 19dBm
    - LED light:    Sys; 5.8G wifi; 2.4G wifi; WAN; LAN
    - Max Power Consumption:    ≤ 22W
    - Size: 198mm * 198mm * 41.02mm

BACKUP YOUR STOCK FIRMWARE:
```
export device=ax880
mkdir -p /tmp/fw_dump_$device
cd /tmp/fw_dump_$device
dmesg > dmesg_$device.log
dtc -I fs /sys/firmware/devicetree/base > $device.dts
cat /proc/device-tree/model > model
cat /proc/mtd > proc_mtd
while read p; do
mtd_dev=$(echo $p | cut -d: -f1)
echo $mtd_dev
dd if=/dev/$mtd_dev of=$mtd_dev
done < proc_mtd
md5sum * > md5sum.log
tar -cvzf ../$device.tar.gz .
export sum=$(md5sum /tmp/$device.tar.gz | cut -d' ' -f1)
mv ../$device.tar.gz /tmp/${device}_${sum}.tar.gz
echo fw backup saved to: /tmp/${device}_${sum}.tar.gz
```
Upload your backup via tftp to the safe place.

INSTALLATION:
1. stock firmware web ui
Rename factory.bin fw image file to factory.ubin. Flash this image
like ordinary stock fw upgrade.

2. stock firmware telnet method
Enter telnet cli (login: root, password: 476t*_f0%g09y) and upload
 factory.bin fw image and rename it to factory.ubin
`cd /tmp && wget <your_web_server_ip>/factory.ubin`
`sysupgrade factory.ubin

3. initramfs method
    Put openwrt-ipq807x-generic-yuncore_ax880-initramfs-uImage.itb to your
    TFTP server and rename it to ax880.initram
    Enable serial console and enter to the u-boot cli.
    Exec these commands:
    `tftpboot <your_tftp_server_ip>:ax880.initram`
    `dhcp`

    When downloading is finished:
    `bootm`
    After booting the device, you need to upload to the device factory.ubi fw image.
    ```
    cd /tmp && wget <your_web_server_ip>/factory.ubi`
    export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1)
    export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1)
    ubiformat /dev/${rootfs} -y -f factory.ubi
    ubiformat /dev/${rootfs_1} -y -f factory.ubi
    reboot
    ```

4. u-boot factory.ubi image method
    Put openwrt-ipq807x-generic-yuncore_ax880-squashfs-factory.ubi to your
    TFTP server and rename it to ax880.ubi
    Enter u-boot cli and exec these commands:
    `tftpboot <your_tftp_server_ip>:ax880.ubi`
    `dhcp`
    After downloading is finished:
    `flash rootfs`
    `flash rootfs_1`
    `reset`

5. u-boot factory.bin method
    Put openwrt-ipq807x-generic-yuncore_ax880-squashfs-factory.bin to your
    TFTP server and rename it to ax880.bin
    Enter u-boot cli and exec these commands:
    `tftpboot <your_tftp_server_ip>:ax880.bin`
    `dhcp`
    After downloading is finished:
    `imgaddr=$fileaddr && nand device 0`
    Erase rootfs memory:
    `nand erase 0x00000000 0x03400000`
    Write rootfs:
    `nand write $fileaddr 0x00000000 $filesize`
    Erase rootfs_1 memory:
    `nand erase 0x3c00000 0x3400000`
    Write rootfs_1
    `nand write $fileaddr 0x3c00000 $filesize`
    `reset`

STOCK FIRMWARE RECOVERY:
Boot initramfs image.
Upload your rootfs mtd partition to the device using scp or download
it from the device using wget.
Enter device ssh cli and exec:
```
cd /tmp && wget <your_web_server_ip>/mtd21`
export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1)
export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1)
ubiformat /dev/${rootfs} -y -f /tmp/mtd21
ubiformat /dev/${rootfs_1} -y -f /tmp/mtd21
reboot
```

Signed-off-by: Isaev Ruslan <legale.legale@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
 2023-11-09 16:52:10 +01:00
Robert Marko
83314c13d0
qualcommax: move ipq807x support to subtarget 
Now that qualcommax exists as a target and dependencies have been updated
let move ipq807x support to subtarget of qualcommax.

This is mostly copy/paste with the exception of having to update SSDK and
NSS-DP to use CONFIG_TARGET_SUBTARGET.

This is a preparation for later addition of IPQ60xx and IPQ50xx support.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2023-06-16 11:11:09 +02:00