mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-20 17:32:57 +00:00
qualcommax: ipq807x: add support for Linksys MX8500
Hardware specification: ======== SoC: Qualcomm IPQ8072A Flash: 512MB (Fidelix FMND4G08S3J-ID) RAM: 1GB (2x Kingston DDR3L D2516ECMDXGJD) Ethernet: 1x 10/100/1000/2500/5000Mbps (Marvell AQR114C) Ethernet: 4x 10/100/1000Mbps (Qualcomm QCA8075) WiFi1: 6GHz ax 4x4 (Qualcomm QCN9024 + Skyworks SKY85784-11) - channels 33-229 WiFi2: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-177 WiFi3: 2.4GHz ax 4x4 (Qualcomm QCN5024 + Skyworks SKY8340-11) IoT: Bluetooth 5, Zigbee and Thread (NXP K32W041) LED: 1x RGB status (NXP PCA9633) USB: 1x USB 3.0 Button: WPS, Reset Flash instructions: ======== 1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin image. More details can be found here: https://www.linksys.com/support-article?articleNum=47547 After first boot check actual partition: - fw_printenv -n boot_part and install firmware on second partition using command in case of 2: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin kernel and in case of 1: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin alt_kernel 2. Installation using serial connection from OEM firmware (default login: root, password: admin): - fw_printenv -n boot_part In case of 2: - flash_erase /dev/mtd21 0 0 - nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin or in case of 1: - flash_erase /dev/mtd23 0 0 - nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin After first boot install firmware on second partition: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin kernel or: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin alt_kernel 3. Installation from initramfs image using USB drive: Put the initramfs image on the USB drive: - dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx8500-initramfs-uImage.itb of=/dev/sda Stop u-boot and run: - usb start && usbboot $loadaddr 0 && bootm $loadaddr Write firmware to the flash from initramfs: - mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin kernel and: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx8500-squashfs-factory.bin alt_kernel 4. Back to the OEM firmware: - mtd -e kernel -n write FW_MX8500_1.0.11.208937_prod.img kernel and: - mtd -r -e alt_kernel -n write FW_MX8500_1.0.11.208937_prod.img alt_kernel 5. USB recovery: Put the initramfs image on the USB: - dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx8500-initramfs-uImage.itb of=/dev/sda Set u-boot env: - fw_setenv bootusb 'usb start && usbboot $loadaddr 0 && bootm $loadaddr' - fw_setenv bootcmd 'run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi' AQR firmware: ======== 1. Firmware loading: To properly load the firmware and initialize AQR PHY, we must use the u-boot aq_load_fw function. To do this, you need to modify u-boot env: With USB recovery: - fw_setenv bootcmd 'aq_load_fw; run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi' and without: - fw_setenv bootcmd 'aq_load_fw; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi' 2. Firmware updating: Newer firmware (AQR-G4_v5.6.5-AQR_WNC_SAQA-L2_GT_ID45287_VER24005.cld) is available in the latest OEM firmware. To load this firmware via u-boot, we need to add the MBN header and update 0:ethphyfw partition. For MBN header we can use script from this repository: https://github.com/testuser7/aqr_mbn_tool - python aqr_mbn_tool.py AQR-G4_v5.6.5-AQR_WNC_SAQA-L2_GT_ID45287_VER24005.cld To update partition we need to install kmod-mtd-rw package first: - insmod mtd-rw.ko i_want_a_brick=1 - mtd -e /dev/mtd26 -n write aqr_fw.mbn /dev/mtd26 Signed-off-by: Paweł Owoc <frut3k7@gmail.com> Link: https://github.com/openwrt/openwrt/pull/14883 Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Paweł Owoc
Robert Marko
parent
7f1c87ebde
commit
9bdaebaff3
@ -31,7 +31,8 @@ edimax,cax1800)
|
||||
;;
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx5300)
|
||||
linksys,mx5300|\
|
||||
linksys,mx8500)
|
||||
idx="$(find_mtd_index u_env)"
|
||||
[ -n "$idx" ] && \
|
||||
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
|
||||
|
||||
@ -37,6 +37,7 @@ ALLWIFIBOARDS:= \
|
||||
edimax_cax1800 \
|
||||
linksys_mx4200 \
|
||||
linksys_mx5300 \
|
||||
linksys_mx8500 \
|
||||
netgear_lbr20 \
|
||||
netgear_rax120v2 \
|
||||
netgear_wax214 \
|
||||
@ -157,6 +158,7 @@ $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
|
||||
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
|
||||
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
|
||||
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
|
||||
$(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
|
||||
|
||||
@ -0,0 +1,523 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq8074.dtsi"
|
||||
#include "ipq8074-hk-cpu.dtsi"
|
||||
#include "ipq8074-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Linksys MX8500";
|
||||
compatible = "linksys,mx8500", "qcom,ipq8074";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart5;
|
||||
serial1 = &blsp1_uart3;
|
||||
led-boot = &led_system_blue;
|
||||
led-running = &led_system_blue;
|
||||
led-failsafe = &led_system_red;
|
||||
led-upgrade = &led_system_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
bt_pwr {
|
||||
gpio-export,name = "bt_pwr";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset-button {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps-button {
|
||||
label = "wps";
|
||||
gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
button_pins: button-state {
|
||||
pins = "gpio64", "gpio67";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio_pins: mdio-state {
|
||||
mdc-pins {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio-pins {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* Bootloader will find the NAND DT node by the compatible and
|
||||
* then "fixup" it by adding the partitions from the SMEM table
|
||||
* using the legacy bindings thus making it impossible for us
|
||||
* to change the partition table or utilize NVMEM for calibration.
|
||||
* So add a dummy partitions node that bootloader will populate
|
||||
* and set it as disabled so the kernel ignores it instead of
|
||||
* printing warnings due to the broken way bootloader adds the
|
||||
* partitions.
|
||||
*/
|
||||
partitions {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:sbl1";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "0:mibib";
|
||||
reg = <0x100000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "0:bootconfig";
|
||||
reg = <0x200000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@280000 {
|
||||
label = "0:bootconfig1";
|
||||
reg = <0x280000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
label = "0:qsee";
|
||||
reg = <0x300000 0x300000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "0:qsee_1";
|
||||
reg = <0x600000 0x300000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "0:devcfg";
|
||||
reg = <0x900000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@980000 {
|
||||
label = "0:devcfg_1";
|
||||
reg = <0x980000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
label = "0:apdp";
|
||||
reg = <0xa00000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a80000 {
|
||||
label = "0:apdp_1";
|
||||
reg = <0xa80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@b00000 {
|
||||
label = "0:rpm";
|
||||
reg = <0xb00000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@b80000 {
|
||||
label = "0:rpm_1";
|
||||
reg = <0xb80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c00000 {
|
||||
label = "0:cdt";
|
||||
reg = <0xc00000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c80000 {
|
||||
label = "0:cdt_1";
|
||||
reg = <0xc80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@d00000 {
|
||||
label = "0:appsblenv";
|
||||
reg = <0xd00000 0x80000>;
|
||||
};
|
||||
|
||||
partition@d80000 {
|
||||
label = "0:appsbl";
|
||||
reg = <0xd80000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@e80000 {
|
||||
label = "0:appsbl_1";
|
||||
reg = <0xe80000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "0:art";
|
||||
reg = <0xf80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "u_env";
|
||||
reg = <0x1000000 0x40000>;
|
||||
};
|
||||
|
||||
partition@1040000 {
|
||||
label = "s_env";
|
||||
reg = <0x1040000 0x20000>;
|
||||
};
|
||||
|
||||
partition@1060000 {
|
||||
label = "devinfo";
|
||||
reg = <0x1060000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1080000 {
|
||||
label = "kernel";
|
||||
reg = <0x1080000 0x9600000>;
|
||||
};
|
||||
|
||||
partition@1680000 {
|
||||
label = "rootfs";
|
||||
reg = <0x1680000 0x9000000>;
|
||||
};
|
||||
|
||||
partition@a680000 {
|
||||
label = "alt_kernel";
|
||||
reg = <0xa680000 0x9600000>;
|
||||
};
|
||||
|
||||
partition@ac80000 {
|
||||
label = "alt_rootfs";
|
||||
reg = <0xac80000 0x9000000>;
|
||||
};
|
||||
|
||||
partition@13c80000 {
|
||||
label = "sysdiag";
|
||||
reg = <0x13c80000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@13e80000 {
|
||||
label = "0:ethphyfw";
|
||||
reg = <0x13e80000 0x100000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aqr_fw: firmware@0 {
|
||||
/* Skip the QCOM MBN Header of 40 bytes */
|
||||
reg = <0x28 0x60002>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@13f80000 {
|
||||
label = "syscfg";
|
||||
reg = <0x13f80000 0xb180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f100000 {
|
||||
label = "app_data";
|
||||
reg = <0x1f100000 0x500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f600000 {
|
||||
label = "0:wififw";
|
||||
reg = <0x1f600000 0xa00000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
led-controller@62 {
|
||||
compatible = "nxp,pca9633";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x62>;
|
||||
nxp,hw-blink;
|
||||
|
||||
led_system_red: led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
led_system_green: led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
led_system_blue: led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
||||
|
||||
ethernet-phy-package@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "qcom,qca8075-package";
|
||||
reg = <0>;
|
||||
|
||||
qcom,package-mode = "qsgmii";
|
||||
|
||||
qca8075_0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
qca8075_1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
qca8075_2: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
qca8075_3: ethernet-phy@3 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
aqr114c: ethernet-phy@8 {
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <8>;
|
||||
reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
|
||||
firmware-name = "marvell/AQR-G4_v5.6.5-AQR_WNC_SAQA-L2_GT_ID45287_VER24005.cld";
|
||||
nvmem-cells = <&aqr_fw>;
|
||||
nvmem-cell-names = "firmware";
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
|
||||
switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
|
||||
switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
|
||||
switch_mac_mode2 = <MAC_MODE_USXGMII>; /* mac mode for uniphy instance2*/
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@1 {
|
||||
port_id = <1>;
|
||||
phy_address = <0>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
port_id = <2>;
|
||||
phy_address = <1>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
port_id = <3>;
|
||||
phy_address = <2>;
|
||||
};
|
||||
|
||||
port@4 {
|
||||
port_id = <4>;
|
||||
phy_address = <3>;
|
||||
};
|
||||
|
||||
port@6 {
|
||||
port_id = <6>;
|
||||
phy_address = <8>;
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
ethernet-phy-ieee802.3-c45;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dp1 {
|
||||
status = "okay";
|
||||
phy-mode = "qsgmii";
|
||||
phy-handle = <&qca8075_0>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
&dp2 {
|
||||
status = "okay";
|
||||
phy-mode = "qsgmii";
|
||||
phy-handle = <&qca8075_1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
&dp3 {
|
||||
status = "okay";
|
||||
phy-mode = "qsgmii";
|
||||
phy-handle = <&qca8075_2>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
&dp4 {
|
||||
status = "okay";
|
||||
phy-mode = "qsgmii";
|
||||
phy-handle = <&qca8075_3>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
&dp6_syn {
|
||||
status = "okay";
|
||||
phy-mode = "usxgmii";
|
||||
phy-handle = <&aqr114c>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
&ssphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qusb_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_qmp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
status = "okay";
|
||||
|
||||
/* ath11k has no DT compatible for PCI cards */
|
||||
compatible = "pci17cb,1104";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
qcom,ath11k-calibration-variant = "Linksys-MX8500";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
qcom,ath11k-calibration-variant = "Linksys-MX8500";
|
||||
};
|
||||
@ -140,6 +140,14 @@ define Device/linksys_mx5300
|
||||
endef
|
||||
TARGET_DEVICES += linksys_mx5300
|
||||
|
||||
define Device/linksys_mx8500
|
||||
$(call Device/linksys_mx)
|
||||
DEVICE_MODEL := MX8500
|
||||
DEVICE_PACKAGES += ipq-wifi-linksys_mx8500 kmod-ath11k-pci \
|
||||
ath11k-firmware-qcn9074 kmod-bluetooth
|
||||
endef
|
||||
TARGET_DEVICES += linksys_mx8500
|
||||
|
||||
define Device/netgear_rax120v2
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
|
||||
@ -15,6 +15,7 @@ ipq807x_setup_interfaces()
|
||||
buffalo,wxr-5950ax12|\
|
||||
dynalink,dl-wrx36|\
|
||||
linksys,mx5300|\
|
||||
linksys,mx8500|\
|
||||
xiaomi,ax9000|\
|
||||
zbtlink,zbt-z800ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
@ -76,6 +77,11 @@ ipq807x_setup_macs()
|
||||
done
|
||||
[ "$(mtd_get_mac_ascii u_env eth2addr)" != "$label_mac" ] && wan_mac=$label_mac
|
||||
;;
|
||||
linksys,mx8500)
|
||||
label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
lan_mac=$(macaddr_add $label_mac 1)
|
||||
wan_mac=$label_mac
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
|
||||
@ -29,7 +29,8 @@ case "$FIRMWARE" in
|
||||
zte,mf269)
|
||||
caldata_extract "0:art" 0x1000 0x20000
|
||||
;;
|
||||
linksys,mx4200v1)
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx8500)
|
||||
caldata_extract "0:art" 0x1000 0x20000
|
||||
ath11k_remove_regdomain
|
||||
;;
|
||||
@ -66,6 +67,10 @@ case "$FIRMWARE" in
|
||||
"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
|
||||
"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
|
||||
case "$board" in
|
||||
linksys,mx8500)
|
||||
caldata_extract "0:art" 0x26800 0x20000
|
||||
ath11k_remove_regdomain
|
||||
;;
|
||||
prpl,haze)
|
||||
caldata_extract_mmc "0:ART" 0x26800 0x20000
|
||||
;;
|
||||
|
||||
@ -12,7 +12,8 @@ boot() {
|
||||
;;
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx5300)
|
||||
linksys,mx5300|\
|
||||
linksys,mx8500)
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
esac
|
||||
|
||||
@ -77,7 +77,8 @@ platform_do_upgrade() {
|
||||
;;
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx5300)
|
||||
linksys,mx5300|\
|
||||
linksys,mx8500)
|
||||
boot_part="$(fw_printenv -n boot_part)"
|
||||
if [ "$boot_part" -eq "1" ]; then
|
||||
fw_setenv boot_part 2
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user