Commit Graph

19226 Commits

Author SHA1 Message Date
Gabor Juhos
923e5d3543 firmware-utils/mktplinkfw: add support for TL-WA701N/ND
SVN-Revision: 29655
2012-01-04 17:30:53 +00:00
Gabor Juhos
72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards
SVN-Revision: 29654
2012-01-04 17:30:52 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
SVN-Revision: 29653
2012-01-04 17:30:50 +00:00
Gabor Juhos
5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020
Also use the system LED for diagnostic.

SVN-Revision: 29652
2012-01-04 17:30:49 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
2012-01-04 17:30:47 +00:00
Gabor Juhos
55e13f4e6a firmware-utils/mktplinkfw: add support for TL-MR3020
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29650
2012-01-04 17:30:44 +00:00
Gabor Juhos
b38b966a3c package: remove the om2p-watchdog package
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 29649
2012-01-04 17:30:42 +00:00
Gabor Juhos
88223f87d1 ar71xx: use the new om-watchdog package for OM2P
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 29648
2012-01-04 17:30:41 +00:00
Gabor Juhos
ce639ba185 package: add om-watchdog package
om2p-watchdog package is OM2P specific. However a similar watchdog
mechanism exists on OM1P as well. This new package wants to substitute
om2p-watchdog with a new one which is suitable either for OM1P and OM2P.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 29647
2012-01-04 17:30:39 +00:00
Jo-Philipp Wich
5b14d8bc0b disable UCLIBC_HAS_XLOCALE and UCLIB_HAS_GLIBC_DIGIT_GROUPING if BUILD_NLS is on (#10735)
SVN-Revision: 29646
2012-01-04 12:32:47 +00:00
Jo-Philipp Wich
a529e3f09e add CT target and TTL/HL match+target
This patch adds the CT target for conntrack (enables manipulation of
conntrack events and supercedes NOTRACK) as well as the TTL/HL target and
match.

SVN-Revision: 29645
2012-01-04 02:52:54 +00:00
Jo-Philipp Wich
a788f199c9 remove current RTSP support
SVN-Revision: 29643
2012-01-04 00:29:29 +00:00
Jo-Philipp Wich
237282ae8c backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems.
SVN-Revision: 29642
2012-01-03 23:08:15 +00:00
Gabor Juhos
8854c90119 ar71xx: add profile and build factory image for the Hornet-UB board
SVN-Revision: 29637
2012-01-01 19:30:29 +00:00
Gabor Juhos
1d3de89f3c ar71xx: build images for the ALFA Network N2/N5 boards
SVN-Revision: 29636
2012-01-01 19:30:28 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards
SVN-Revision: 29635
2012-01-01 19:30:25 +00:00
Jo-Philipp Wich
0baa69ddda iwinfo: factor txpower offset into info display output, recompile if driver selection changes
SVN-Revision: 29634
2012-01-01 16:17:10 +00:00
Jo-Philipp Wich
d22adb1b06 if CONFIG_BUILD_NLS is selected, compile uClibc with locale support
SVN-Revision: 29633
2012-01-01 15:11:11 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
SVN-Revision: 29631
2011-12-31 15:02:46 +00:00
Gabor Juhos
fff02e6ea8 ar71xx: enable SWCONFIG_LEDS
SVN-Revision: 29630
2011-12-31 15:02:40 +00:00
Gabor Juhos
ff89832fdb package/base-files: add support for the switch LED trigger
SVN-Revision: 29629
2011-12-31 15:02:35 +00:00
Gabor Juhos
3f85c52a3a package/base-files: use case statement in led init script
SVN-Revision: 29628
2011-12-31 15:02:32 +00:00
Gabor Juhos
5fa65cba6e kernel: swconfig: introduce a generic switch LED trigger
SVN-Revision: 29627
2011-12-31 15:02:30 +00:00
Gabor Juhos
8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks
SVN-Revision: 29626
2011-12-31 15:02:26 +00:00
Gabor Juhos
975355a2b1 kernel: swconfig: add get_port_{link,stats} callbacks
SVN-Revision: 29625
2011-12-31 15:02:24 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N
SVN-Revision: 29624
2011-12-31 13:54:11 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
Gabor Juhos
76dacee995 ar71xx: enable sysupgrade support for airrouter
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 29614
2011-12-27 16:59:43 +00:00
Gabor Juhos
c6ee919b2a ar71xx: fix sysupgrade on PB42/PB44 boards
SVN-Revision: 29613
2011-12-27 16:57:01 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
Jo-Philipp Wich
250ef0cb72 add usbreset - a small simple utility to send port rests to selected usb devices (#10394)
SVN-Revision: 29611
2011-12-25 13:59:17 +00:00
Jo-Philipp Wich
9fa33ceee2 add missing config symbol
SVN-Revision: 29610
2011-12-25 13:33:18 +00:00
Jo-Philipp Wich
2ad90a1ec3 package CT target
SVN-Revision: 29609
2011-12-25 13:32:53 +00:00
Felix Fietkau
e7c63048df mac80211: clean up init, remove some redundant checks, fix tx power init (#10113)
SVN-Revision: 29606
2011-12-23 19:24:38 +00:00
Hauke Mehrtens
11125d68ed brcm47xx: fix usb on more recent bcma based devices.
SVN-Revision: 29605
2011-12-23 17:21:52 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
Gabor Juhos
03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
2011-12-23 14:27:05 +00:00
Felix Fietkau
246986cdb1 kernel: enable magic sysrq by default, it does not add much to the kernel image size, but is useful for debugging many kinds of hangs/crashes
SVN-Revision: 29600
2011-12-22 08:45:13 +00:00
Felix Fietkau
db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547)
SVN-Revision: 29598
2011-12-22 05:43:53 +00:00
Jonas Gorski
8799627ef0 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
Thanks netprince for reporting and testing.

SVN-Revision: 29595
2011-12-21 19:32:40 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)
SVN-Revision: 29593
2011-12-21 01:27:48 +00:00
Jo-Philipp Wich
1c6821b42e base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
SVN-Revision: 29587
2011-12-20 17:25:15 +00:00
Jo-Philipp Wich
77dda8d67a firewall: - introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them - annotate default traffic rules with names - bump version
SVN-Revision: 29577
2011-12-20 01:10:15 +00:00
Hauke Mehrtens
0cd03df3b1 brcm47xx: remove patch starting adding brcm4716 to ssb
brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576
2011-12-19 23:55:20 +00:00
Hauke Mehrtens
5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
2011-12-19 23:39:13 +00:00
Hauke Mehrtens
1aa5a61754 kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
SVN-Revision: 29574
2011-12-19 23:33:03 +00:00
Hauke Mehrtens
91d0ef6f19 brcm47xx: remove support for kernel 2.6.39
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573
2011-12-19 23:26:15 +00:00