Commit Graph

47712 Commits

Author SHA1 Message Date
Rafał Miłecki
c3a43753b9 fstools: update to the latest version
eec16e2 blockd: add optional "device" parameter to "info" ubus method
9ab936d block(d): always call hotplug.d "mount" scripts from blockd
4963db4 blockd: use uloop_process for calling /sbin/hotplug-call mount
cddd902 Truncate FAT filesystem label until 1st occurance of a blank (0x20)

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-05-06 17:50:31 +02:00
Chuanhong Guo
47f17b0662 generic: ar8216: fix unknown packet flooding for ar8229/ar8236
ar8229 and ar8236 don't allow unknown unicast/multicast frames and
broadcast frames to be flooded to cpu port. This isn't desired behavior
for swconfig as we treat it as a standalone switch.
Current code doesn't enable unicast frame flooding for ar8229 and uses
wrong setup for ar8236. This commit fixes both of them by enabling port
0 flooding for all unknown frames.

Fixes: FS#2848
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-05-06 08:59:27 +08:00
Florian Eckert
4d86e2ce06 buildsystem: add CPE information to ipkg packages and manifest files
Common Platform Enumeration (CPE) is a structured naming scheme for
information technology systems, software, and packages.

This information already exists in some makefiles. In order for the
information to be processed further, it should also be added to the
manifest file and the control file of ipkg packages.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2020-05-05 22:07:59 +02:00
Adrian Schmutzler
0fb5962e62 sunxi: remove unneeded shebang for preinit files
preinit files are sourced and they have no execute bit set, so remove
their shebang.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-05 13:09:19 +02:00
Adrian Schmutzler
755790808c sunxi: tidy up cases in base-files
This removes unnecessary quotes in cases and applies alphabetic
order to members.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-05 13:06:26 +02:00
Rafał Miłecki
9295ce7006 fstools: update to the latest version
8b9e601 block: always use st_dev (device ID) of / when looking for root
37c9148 block: simplify check_extroot() a bit
d70774d block: add some basic extroot documentation
32db27d Revert "block: support hierarchical mount/umount"
0b93429 Revert "block: mount_action: handle mount/umount deps"

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-05-05 09:14:40 +02:00
Hans Dedecker
0836d0dea2 odhcpd: update to latest git HEAD (FS#3056)
5ce0770 router: fix Lan host reachibility due to identical RIO and PIO prefixes (FS#3056)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-05-04 21:29:24 +02:00
Petr Štetiar
73de205c57 kernel: bump 5.4 to 5.4.38
Refreshed patches.

Run tested: qemu-x86-64, apalis
Build tested: x86/64, ipq40xx, ath79, imx6, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-05-04 21:09:12 +02:00
John Crispin
b9cf9ebdb7 mediatek: add uboot
Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 16:31:19 +02:00
John Crispin
220f43e0f2 mediatek: fix image building
Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 16:28:46 +02:00
John Crispin
abb0452cd8 mediatek: update patches
Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 16:27:30 +02:00
John Crispin
b5516603dd mac80211: more wifi reconf related fixes
* uci state was not getting reset properly during teardown
* AP+STA co-exist state was not flushed properly upon channel switch
* remove a debug logger call
* properly teardown supplicant instances when they get disabled
* add md5 config support for supplicant
* don't call wpa_supplicant_prepare_interface twice

Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 16:22:03 +02:00
Josef Schlehofer
0e522d5f4a curl: update to version 7.70.0
- Release notes:
https://curl.haxx.se/changes.html#7_70_0

- Refreshed patch

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2020-05-04 07:59:46 +02:00
Stijn Tintel
3a79e3b185 argp-standalone: fix segfault in canon_doc_option
Backported from glibc.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2020-05-03 20:31:30 +03:00
Stijn Tintel
49ab97ca86 bcm27xx: backup /boot/cmdline.txt and restore early
If you want to use the Raspberry Pi UART, "console=serial0,115200" needs
to be removed from the kernel cmdline. This is done by editing
/boot/cmdline.txt. However, this file is not currently backed up during
sysupgrade, so this effectively breaks HATs that require the use of the
UART every sysupgrade.

Backup this file during sysupgrade, and restore it before rebooting.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2020-05-03 17:30:45 +03:00
Hans Dedecker
ad27c133eb base-files: generate config files with correct permissions
As touch creates files with permission 0644 use umask to create
config files with permission 0600 to be inline with INSTALL_CONF

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-04-30 21:51:12 +02:00
Hans Dedecker
2855be3151 uci: update to latest git HEAD
ec8d323 file: preserve original file mode after commit

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-04-30 21:51:02 +02:00
Jason A. Donenfeld
f57230c4e6 wireguard: bump to 1.0.20200429
* compat: support latest suse 15.1 and 15.2
* compat: support RHEL 7.8's faulty siphash backport
* compat: error out if bc is missing
* compat: backport hsiphash_1u32 for tests

We now have improved support for RHEL 7.8, SUSE 15.[12], and Ubuntu 16.04.

* compat: include sch_generic.h header for skb_reset_tc

A fix for a compiler error on kernels with weird configs.

* compat: import latest fixes for ptr_ring
* compat: don't assume READ_ONCE barriers on old kernels
* compat: kvmalloc_array is not required anyway

ptr_ring.h from upstream was imported, with compat modifications, to our
compat layer, to receive the latest fixes.

* compat: prefix icmp[v6]_ndo_send with __compat

Some distros that backported icmp[v6]_ndo_send still try to build the compat
module in some corner case circumstances, resulting in errors.  Work around
this with the usual __compat games.

* compat: ip6_dst_lookup_flow was backported to 3.16.83
* compat: ip6_dst_lookup_flow was backported to 4.19.119

Greg and Ben backported the ip6_dst_lookup_flow patches to stable kernels,
causing breaking in our compat module, which these changes fix.

* git: add gitattributes so tarball doesn't have gitignore files

Distros won't need to clean this up manually now.

* crypto: do not export symbols

These don't do anything and only increased file size.

* queueing: cleanup ptr_ring in error path of packet_queue_init

Sultan Alsawaf reported a memory leak on an error path.

* main: mark as in-tree

Now that we're upstream, there's no need to set the taint flag.

* receive: use tunnel helpers for decapsulating ECN markings

ECN markings are now decapsulated using RFC6040 instead of the old RFC3168.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2020-04-30 08:00:53 +02:00
Petr Štetiar
5ea3ea154f kernel: bump 5.4 to 5.4.36
Refreshed patches, removed upstreamed patch:

 generic/hack: 551-loop-Better-discard-support-for-block-devices.patch

Added generic config symbol `ARM64_ERRATUM_1542419` due to Fixes:
f2791551cedb ("arm64: errata: Hide CTR_EL0.DIC on systems affected by
Neoverse-N1 #1542419").

Run tested: qemu-x86-64, apalis, nbg6617
Build tested: x86/64, imx6, ipq40xx, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-30 00:52:04 +02:00
Petr Štetiar
493eef5b27 wireless-regdb: bump to latest release 2020-04-29
Update to latest release.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-30 00:52:04 +02:00
Petr Štetiar
8036e7ebb5 ath10k-ct: update to version 2020-04-29
Pulls in workaround for TX rate code firmware bug which might as well
help track it down via different printk()s and thus possibly provide
more clue for proper fix.

Firmware currently sends wrong (0xff) TX rate code which causes
WARN_ONCE, so the workaround just changes this bogus value (0xff) into 0.

For 5.4 it also pulls in tx-queue-wake throttling patch "ath10k: Restart
xmit queues below low-water mark", which should improve performance with
high number of concurrent TCP streams.

Ref: https://github.com/greearb/ath10k-ct/pull/129
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-30 00:52:04 +02:00
Petr Štetiar
b17a5a9bdb dnsmasq: always inform about disabled dhcp service
Init script checks for an already active DHCP server on the interface
and if such DHCP server is found, then it logs "refusing to start DHCP"
message, starts dnsmasq without DHCP service unless `option force 1` is
set and caches the DHCP server check result.

Each consecutive service start then uses this cached DHCP server check
result, but doesn't provide log feedback about disabled DHCP service
anymore.

So this patch ensures, that the log message about disabled DHCP service
on particular interface is always provided.

Acked-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-30 00:52:04 +02:00
Daniel Golle
aa0526b5f2 ath79: fix dts of Teltonika RUT9xx devices
The previous commits were missing a semicolon.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-29 22:59:23 +01:00
Daniel Golle
aa4a33ac62 ath79: add support for Teltonika RUT955 H7V3C0
This board was previously supported in ar71xx as 'RUT9XX'. The
difference between that and the other RUT955 board already supported in
ath79 is that instead of the SPI shift registers driving the LEDs and
digital outputs that model got an I2C GPIO expander instead.

To support LEDs during early boot and interrupt-driven digital inputs,
I2C support as well as support for PCA953x has to be built-in and
cannot be kernel modules, hence select those symbols for ath79/generic.

Specification:

- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344)
- built-in 4G/3G module (example: Quectel EC-25EU)
- internal microSD slot (spi-mmc, buggy and disabled for now)
- RS232 on D-Sub9 port (Cypress ACM via USB, /dev/ttyACM0)
- RS422/RS485 (AR934x high speed UART, /dev/ttyATH1)
- analog 0-24V input (MCP3221)
- various digital inputs and outputs incl. a relay
- 11x LED (4 are driven by AR9344, 7 by PCA9539)
- 2x miniSIM slot (can be swapped via GPIO)
- 2x RP-SMA/F (Wi-Fi), 3x SMA/F (2x WWAN, GPS)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- debugging UART available on PCB edge connector

Serial console (/dev/ttyS0) pinout:

- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side

Flash instruction:

Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.06.051" firmware and U-Boot "3.0.1".

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-29 21:32:35 +01:00
Daniel Golle
c8b309b53d ath79: split Teltonika RUT955 to support other RUT9xx models
Split device-tree of Teltonika RUT955 into a generic RUT9xx part and
a part specific to that version of RUT955 already supported.
Also harmonize GPIO and LED names with what is used by the vendor
firmware and assign RS485 DTR signal.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-29 21:32:35 +01:00
Daniel Golle
447d335d00 ugps: nmea: fix time comparision
Fix bug causing system time to be set over and over again, and causing
massive log pollution.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-29 21:32:35 +01:00
Adrian Schmutzler
d9ff499671 kirkwood: disable image for Linksys EA3500 (Audi)
Due to the switch to DSA, the kernel image has become too big (2641k) for the
kernel partition (2624k) on this device:

  WARNING: Image file [...]/linux-kirkwood/linksys_audi-uImage is too big

Disable the device until this is fixed, so buildbots can continue their work.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-29 18:04:16 +02:00
David Bauer
3f660249e6 kernel: hwmon: add Analog Devices AD741x support
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-04-29 16:03:00 +02:00
Kevin Darbyshire-Bryant
35a8657a40 build: prereq: change minimum make version to 3.82
undefine was added in make 3.82 which is now some 10 years ago, some
make scripts are beginning to use 'undefine'

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-29 14:26:23 +01:00
Adrian Schmutzler
522f6b7eee ath79: add SUPPORTED_DEVICES based on ar71xx for some devices
This adds some still-missing board names for old TP-Link devices
to ath79 SUPPORTED_DEVICES.

Fixes: FS#3017

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-28 20:28:06 +02:00
Adrian Schmutzler
03e742dcd8 Revert "ramips: explicitly disable built-in switch for lan-only devices"
This reverts commit a1693bf626.

The rt288x and rt3883 devices in question don't have switches.
Only keep the merged case for rt305x.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-28 16:53:29 +02:00
Adrian Schmutzler
8b373892d3 kirkwood: remove support for kernel 4.19
kirkwood has moved to DSA on 5.4, which will make kernel 4.14 and 4.19
support broken on the affected devices.
Support on kernel 5.4 seems to have been running fine for almost 2 months
on multiple devices, while support for 4.19 has never left testing state.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-04-28 16:50:20 +02:00
Adrian Schmutzler
0af2c44604 kirkwood: remove support for kernel 4.14
kirkwood has moved to DSA on 5.4, which will make kernel 4.14 and 4.19
support broken on the affected devices.
Support on kernel 5.4 seems to have been running fine for almost 2 months
on multiple devices.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-04-28 16:49:31 +02:00
Pawel Dembicki
4fd7e539e4 kirkwood: switch from swconfig to dsa
This patch removes support for swconfig and switches to dsa driver.

swconfig and switch drivers are removed. DSA driver is enabled and
configuration is adjusted.

In kirkwood only two devices have switches: Linksys EA3500 and EA4500.

WAN MAC configuration in 02_network is required because otherwise WAN
would have the same MAC address as lan interfaces. In swconfig solution
the WAN address was assigned in u-Boot to eth1. Now, as eth1 is disabled
and wan is part of the switch, we have to set it manually.

Compile tested: EA3500, EA4500
Run tested: EA4500

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[minor commit title/message adjustments, remove swconfig package
for devices]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-28 16:49:31 +02:00
Antonio Quartulli
4b3b8ec81c wpad-wolfssl: fix crypto_bignum_sub()
Backport patch from hostapd.git master that fixes copy/paste error in
crypto_bignum_sub() in crypto_wolfssl.c.

This missing fix was discovered while testing SAE over a mesh interface.

With this fix applied and wolfssl >3.14.4 mesh+SAE works fine with
wpad-mesh-wolfssl.

Cc: Sean Parkinson <sean@wolfssl.com>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-28 11:45:44 +01:00
DENG Qingfang
a10537f674 ramips: fix MikroTik 750Gr3 ports MAC addresses
According to a user in OpenWrt forum, on RouterOS the MAC addresses are
ether1(WAN) = MAC
ether2(LAN2) = MAC+1
ether3(LAN3) = MAC+2
etc.

Fix the MAC addresses in OpenWrt.

Ref: https://forum.openwrt.org/t/few-dumb-question-about-mt7530-rb750gr3-dsa/61608
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[remove label_mac in 02_network]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-28 10:57:17 +02:00
Álvaro Fernández Rojas
a882bfce05 ath10k-ct-firmware: add htt-mgt variants
For wave-2, there is now a new variant: htt-mgt-community (vs the old
full-htt-mgt-community).

The non-full one (hence forth 'diet') compiles out a lot of firmware features
that ath10k does not use. This saves a lot of resources and lets one
configure more stations/vdevs/etc using fwcfg.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-04-28 09:33:09 +02:00
Álvaro Fernández Rojas
06f510df6e ath10k-ct-firmware: update firmware images
No release notes this time.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-04-28 09:33:09 +02:00
Álvaro Fernández Rojas
2e5e9b459e ath10k-ct-firmware: rename ct-htt packages
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-04-28 09:33:09 +02:00
Álvaro Fernández Rojas
658e68f85c ath10k-firmware: move CT firmwares to new package
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-04-28 09:33:09 +02:00
Álvaro Fernández Rojas
ce2bd2bd03 ath10k-ct: remove old patches
Only keep 5.4 patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-04-28 09:33:09 +02:00
Luiz Angelo Daros de Luca
a3079fb7ba elfutils: powerpc build fix
Fixes following build error on mpc85xx/generic:

 ppc_initreg.c: In function 'ppc_set_initial_registers_tid':
 ppc_initreg.c:79:22: error: field 'r' has incomplete type
        struct pt_regs r;

Ref: FS#2924
Fixes: d27623b542 ("elfutils: update to 0.179")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[commit description facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-28 07:45:00 +02:00
Petr Štetiar
76a0ddf130 wireless-regdb: backport three upstream fixes
Another release is overdue for quite some time, so I'm backporting three
fixes from upstream which I plan to backport into 19.07 as well.

Ref: FS#2880
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-28 07:45:00 +02:00
Andre Heider
87c909e969 omap: remove support for kernel 4.14
There's support for 5.4 and 4.19 now, remove the 3rd option.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-04-28 01:10:48 +02:00
Andre Heider
1e3ee247be omap: switch to kernel 5.4
Runtime tested on beagleblack.

Signed-off-by: Andre Heider <a.heider@gmail.com>
[added test comment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-28 01:10:42 +02:00
Andre Heider
d20cfa2bd3 omap: make kernel_oldconfig
Attempt to keep the same nand/sound/panel functionality using new knobs.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-04-28 01:10:37 +02:00
Andre Heider
75f7f7eee9 omap: copy kernel 4.19 config for 5.4
Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-04-28 01:10:33 +02:00
Adrian Schmutzler
80a094aaf3 ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC
Like for Ubiquiti PowerBeam 5AC Gen2, the highest RSSI LED can
be exploited to indicate boot/failsafe/upgrade for the NanoBeam AC
and Nanostation AC as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 23:28:51 +02:00
Roger Pueyo Centelles
e210fe91b1 ath79: add support for Ubiquiti PowerBeam 5AC Gen2
The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna. The device is
hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs.

Specifications:
 - SoC: Qualcomm Atheros AR9342 rev 2
 - RAM: 64 MB DDR2
 - Flash: 16 MB SPI NOR (mx25l12805d)
 - Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in
 - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
 - WiFi 2.4 GHz: Atheros AR9340 (SoC-based)
 - Buttons: 1x (reset)
 - LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue.
 - UART: not tested

Installation from stock airOS firmware:
 - Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[changed device name in commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 23:17:30 +02:00
Adrian Schmutzler
f0435d5343 ramips: rt3883: remove swconfig from individual DEVICE_PACKAGES
In rt3883 subtarget, several devices add swconfig to their DEVICE_PACKAGES.
This is redundant as the package is already provided via DEFAULT_PACKAGES.

Remove the redundant inclusions.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 23:07:49 +02:00