Commit Graph

20815 Commits

Author SHA1 Message Date
Koen Vandeputte
bcbc7ba768 kernel: bump 4.14 to 4.14.136
Refreshed all patches.

Altered patches:
- 306-v4.16-netfilter-remove-saveroute-indirection-in-struct-nf_.patch

Remove upstreamed:
- 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch
- 088-0002-i2c-qup-fixed-releasing-dma-without-flush-operation.patch
- 500-arm64-dts-marvell-Fix-A37xx-UART0-register-size.patch

Fixes:
- CVE-2019-13648
- CVE-2019-10207

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-06 11:54:50 +02:00
David Bauer
0f3d54f5b7 mpc85xx: correct OCEDO Panda LED definition
WLAN0 and the unused LED are currently swapped. Fix this, so the LED
behavior matches the other OCEDo devices.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit a3a2b4857e)
2019-08-05 22:40:35 +02:00
David Bauer
862352cdbd ar71xx: fix HiveAP 121 PLL for 1000M
The Aerohive HiveAP 121 has the wrong PLL value set for Gigabit speeds,
leading to packet-loss. 10M and 100M work fine.

This commit sets the Gigabit Ethernet PLL value to the correct value,
fixing packet loss.

Confirmed with iperf and floodping.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit cb49e46a8a)
2019-08-01 21:29:43 +02:00
Koen Vandeputte
a654ac0d6e ar71xx: really fix Mikrotik board detection
commit e09da0169a ("ar71xx: fix Mikrotik board detection")
was generated based on testing a rb-912 board, on which detection failed.

Testing on more hardware shows something fun:

machine	: MikroTik RouterBOARD 922UAGS-5HPacD
machine	: Mikrotik RouterBOARD 912UAG-5HPnD

Both lowercase and uppercase are used.
So ensure we support both now ..

Fixes: e09da0169a ("ar71xx: fix Mikrotik board detection")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 845b2a1cfe)
2019-08-01 12:11:59 +02:00
Koen Vandeputte
4fd61b6220 kernel: bump 4.14 to 4.14.134
Refreshed all patches.

Remove upstreamed:
- 049-v4.20-mips-remove-superfluous-check-for-linux.patch

Fixes:
- CVE-2019-3846
- CVE-2019-3900

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-31 16:56:19 +02:00
Koen Vandeputte
8c57d88fcc imx6: bump SDMA firmware to 3.5
- add uart rom script address in header of sdma firmware to support
  the uart driver of latest kernel working well while old firmware
  assume ram script used for uart driver as NXP internal legacy
  kernel.
- add multi-fifo SAI/PDM scripts.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 819b6345a206ad182dd3c2d786a3d7f04e33f751)
2019-07-31 16:56:19 +02:00
Petr Štetiar
2b074654b0 ath79: make target source-only
In order to prevent build of images for this release as ath79 is going
to deprecate ar71xx in the next release.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-29 17:47:29 +02:00
Koen Vandeputte
1172d809f2 ar71xx: fix Mikrotik board detection
Fix a typo in the machine type being extracted from /proc/cpuinfo
which causes all Mikrotik board to be undetected properly.

This lead to sysupgrade issues and probably some others too.

Fixes: 76c963bb01 ("ar71xx: base-files: fix board detect on new MikroTik devices")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-29 10:15:46 +02:00
Tomislav Požega
5ec609815e ar71xx: fix WLAN LED names for Archer C7
Update WLAN LED colour identifier for both interfaces on Archer C7

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit 65762cdd22)
2019-07-28 23:27:39 +02:00
Tomislav Požega
be14b1feae ar71xx: fix system LED names on Archer C5/C7
Move system LED board definitions of Archer C5/C7 to reflect
actual system LED colour used

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit a73934fc9a)
2019-07-28 23:25:24 +02:00
Tomislav Požega
c59e24ca30 ar71xx: Archer C7 v1 LED names and RFKILL fixes
All leds on these boards are green. v1 has RFKILL GPIO 23 for production
units (it had GPIO 13 only for test phase units, and these are rather
very rare to find). As for the previous attempt to fix this and revert
due to WDR boards have blue leds, it was wrong: WDR board does not use
common setup (false).

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit c79c001b59)
2019-07-28 23:25:11 +02:00
Tomislav Požega
3c65433186 ar71xx: update qca-usb-quirks patch
Base address for USB0 has changed from 0x18116c94 on AR934X
to 0x18116d94 on QCA9558. CP Typo remained for years here...

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit fd5aa19480)
2019-07-28 23:25:03 +02:00
David Bauer
abe137ff5e ramips: add support for ASUS RT-AC57U
SoC:   MediaTek MT7621AT
RAM:   128M (Winbond W631GG6KB-15)
FLASH: 16MB (Spansion S25FL128SA)
WiFi:  MediaTek MT7603EN bgn 2SS
WiFi:  MediaTek MT7612EN nac 2SS
BTN:   Reset - WPS
LED:    - Power
        - LAN {1-4}
        - WAN
        - WiFi 2.4 GHz
        - WiFi 5 GHz
        - USB
UART:  UART is present next to the Power LED.
       TX - RX - GND - 3V3 / 57600-8N1
       3V3 is the nearest one to the Power LED.

Installation
------------
Via TFTP:
1. Set your computers IP-Address to 192.168.1.75.
2. Power up the Router with the Reset button pressed.
3. Release the Reset button after 5 seconds.
4. Upload OpenWRT sysupgrade image via TFTP:
 > tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE>

Via SSH:
Note: User/password for SSH is identical with the one used in the
Web-interface.
1. Complete the initial setup wizard.
2. Activate SSH under "Administration" -> "System".
3. Transfer the OpenWrt sysupgrade image via scp:
 > scp owrt.bin admin@192.168.1.1:/tmp
4. Connect via SSH to the router.
 > ssh admin@192.168.1.1
5. Write the OpenWrt image to flash.
 > mtd-write -i /tmp/owrt.bin -d linux
6. Reboot the router
 > reboot

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 14e0e4f138)
2019-07-21 13:10:12 +02:00
David Bauer
5cd9b50d69 ath79: add support for devolo WiFi pro 1750x
Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN:   1x Reset
LED:   1x LED Power (non-controllable)
       1x LED Status (internal)
       1x LED LAN (controlled by PHY)
       1x LED WLAN
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to external-LED header.

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit cb3cd52694)
2019-07-21 13:09:45 +02:00
Etienne Champetier
76a4c93f9d ar71xx: enable SGMII fixup on Mikrotik wAP AC
fixes intermittent loss of connectivity on 1Gbit port, with log message:
> 803x_aneg_done: SGMII link is not ok

Thanks to David Bauer for pointing me in the right direction.
I just had to figure out the right bus_id, which you find in this log:
> ag71xx ag71xx.1: connected to PHY at gpio-1:00 [uid=004dd074,
  driver=Atheros 8031 ethernet]

Fixes FS#2236

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
[Wrapped commit message - Fixed whitespace erors]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 2a7519e29d)
2019-07-21 13:09:31 +02:00
Petr Štetiar
4022035aaf mt7620: disable image generation for Netgear EX2700
Image generation is currently failing on builbots due to the following
error:

 WARNING: Image file [...] mt7620-ex2700-squashfs-factory.bin is too big

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-20 23:40:20 +02:00
Alberto Bursi
299faa7ab7 x86: add modern network modules to Generic target
Many Atom-based embedded/industrial x86 boards can't run 64bit operating
systems due to either processor or board firmware limitations, but they
have modern interfaces (PCIe) or have modern Intel gigabit controllers
onboard.  With the current default package selection for x86 Generic
target their network won't work.

Add the modern gigabit network modules needed or most likely going to be
used as add-in cards, similar to what is the list on x86_64 target.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[fixed whitespace issue]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit bb27cde257)
2019-07-20 22:58:08 +02:00
Petr Štetiar
2938d6530a ath25: disable image generation for ubnt2 and ubnt5 devices
Image generations is currently failing on builbots due to the following
errors:

 mkfwimage -B XS2 -v XS2 [...] ath25-ubnt2-squashfs-sysupgrade.bin
 ERROR: Failed creating firmware layout description - error code: -2

 mkfwimage -B XS5 -v XS5 [...] ath25-ubnt5-squashfs-sysupgrade.bin
 ERROR: Failed creating firmware layout description - error code: -2

That cryptic -2 error simply means, that kernel+rootfs doesn't fit into
the firmware partition.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-20 08:57:23 +02:00
Adrian Schmutzler
96cc390d88 ath79: Use -v1 suffix for TP-Link WDR3600/4300
In ath79, identifiers tplink_tl-wdr3600 and tplink_tl-wdr4300 have
been used while most other TP-Link devices include the revision.

Although there actually is only one major revision of these
devices, they bear the revision on their bottom (v1.x). TP-Link
also refers to the devices as V1 on its web page.

This patch thus adds -v1 to both so it is more consistent
with other devices and with what you would expect from reading
the on-device sticker and the support pages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-17 22:47:28 +02:00
Petr Štetiar
0254087e92 ath79: ar9330: add missing watchdog node
It was reported in FS#2385, that Carambola2 doesn't currently have
working watchdog so fix it by adding watchdog node.

Ref: FS#2385
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 0893f28e19)
2019-07-17 16:49:54 +02:00
Koen Vandeputte
b947de25a6 ar71xx: fix nand init issues on some rb2011 devices
While flashing lots of RB2011 devices, I noticed that
some of them refused to boot properly, failing over the NAND parameters.

Checking in detail shows that some device seem to use another NAND flash
which only support standard 2048-byte pages, without 512-byte subpage support.

This commit disables usage of these small subpage completely.

Advantages:
- Both NAND's with(out) subpage support are working now
- The nand speed increases a bit (measured roughly 1%) in typical usecases

Disadvantages:
- The maximum storage capacity decreases by ~0.2%
as small changes can consume a full page (2048 bytes) now.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-12 09:39:33 +02:00
Koen Vandeputte
f40f7b0fb5 kernel: bump 4.14 to 4.14.133
Refreshed all patches.

Fixes:

- CVE-2019-3900

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-12 09:39:33 +02:00
Fredrik Olofsson
955b393cf0 kernel: cherry pick patch removing __linux__ check
This is already included in newer upstream. Needed to build BPF programs
using the MIPS kernel include files.

Without this patch, clang fails with "#error Use a Linux compiler or
give up." in sgidefs.h when building BPF programs.

Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
(cherry-picked from commit 7d96c301d6)
2019-07-10 18:05:32 +02:00
Koen Vandeputte
7f4510a251 kernel: bump 4.14 to 4.14.132
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-09 17:02:09 +02:00
Pawel Dembicki
acd2497cfb mpc85xx: Use gzip compressed kernel on HiveAP-330
After commit 1e41de2f48 ("mpc85xx: convert TL-WDR4900 v1 to simpleImage")
XZ compression of zImage was enabled. This change exposed a problem with
the HiveAP-330 images, which was fixed by foregoing the compression on
the kernel altogether with commit 98089bb8ba
("mpc85xx: Use uncompressed kernel on the HiveAP-330").

This patch adds back the gzip compression of the kernel image by
utilizing the generic OpenWRT uImage method instead of relying on
the PowerPC bootwrapper script that did it previously.

Compile-tested: p1020/hiveap-330

Tested-by: Chris Blake <chrisrblake93@gmail.com> [run-tested]
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[filled in even more text]
2019-07-05 22:29:27 +02:00
Mathias Kresin
1b99051399 lantiq: enable STP where referenced
While moving common used parts to dtsi files, the was disabled by
default but not enabled for all boards using the STP.

Fixes: f519fea4c6 ("lantiq: kernel 4.14: cleanup dts files")

Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2019-07-03 11:17:29 +02:00
W. Michael Petullo
cb9db2a0c3 ar71xx: fix ath79/rb4xx IRQ initialization on kernel 4.14
Apply the same approach as in commit 3b53d6fdbc ("ar71xx: fix pci irq
init on kernel 4.14") to fix IRQ initialization for ath79-based chipsets
on rb4xx.

Ref: PR#2182
Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: W. Michael Petullo <mike@flyn.org>
[commit ref fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 8c7d6c47a7)
2019-07-03 07:47:38 +02:00
Brett Mastbergen
34d3eaff4a mvebu: Fix platform.sh for non-generic espressobin versions
When the non-generic espressobin targets were added these board checks
were not updated.   One side effect of this is that config is not saved
during an upgrade of -emmc,-v7, or -v7-emmc devices.

Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
(cherry picked from commit 95c1dc5e86)
2019-06-28 21:53:05 +02:00
Vladimir Vid
6c9a744588 mvebu: fix regression for non-generic ESPRESSObin versions
When targets for multiple ESPRESSObin devices were added, not all
files were updated which means any ESPRESSObin version beside generic
won't have proper networking, sysupgrade and uboot-env. This patch
fixes the issue.

* fixup network detection
* fixup uboot-env
* fixup platform.sh for sysupgrade

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
(cherry picked from commit bc47285cb3)
2019-06-28 21:52:57 +02:00
Vladimir Vid
886f524c6b mvebu: image: fix generic-arm64.bootscript mmc selection
Not all versions of ESPRESSObin require SD card, but can
be booted from the internal emmc flash (mmc dev 1) instead.
Add a simple check in the bootscript to see which mmc device
is detected and boot from it using mmcdev variable.

Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
(cherry picked from commit 008b41b9b0)
2019-06-28 21:52:21 +02:00
Chuanhong Guo
a353f2ee7f ramips: mt7621: add IRQ for GPIO node
This makes interrupt-based gpio-keys working.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
(cherry picked from commit 110daa16e4)
2019-06-27 17:17:23 +02:00
Yangbo Lu
94a1999b4f layerscape: drop pause frame support for aquantia phy
An aquantia phy patch which dropped pause frame support was
missing when integrated LSDK-19.03 kernel patches into OpenWrt.
Without this patch, LS1043A 10G port would not work. So apply it.

Patch link
https://source.codeaurora.org/external/qoriq/qoriq-components/
linux/commit/?h=linux-4.14&id=66346b115818365cfaf99d292871b19f0a1d2850

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-26 07:27:38 +02:00
Koen Vandeputte
eee336ee4a kernel: bump 4.14 to 4.14.130
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-25 16:48:50 +02:00
Christian Lamparter
dbe5730bf9 apm821xx: fix bogus key-presses on boot
"There are often transient line events when
the system is powered up and initialized and it
is often necessary for the gpio_chip driver to
clear any interrupt flags in hardware before
setting up the gpio chip, especially the
irqchip portions of it."
<http://lists.infradead.org/pipermail/openwrt-devel/2019-June/017630.html>

This patch adds a fix for the APM821XX's interrupt
controller to clear any bogus pending toggled
interrupts that happens on various APM821XX boards
on boot.

The patch also changes the debouce-interval from the
default 5ms debounce interval to 60ms all around.
The default setting caused on occasions that the button
state became stuck in a pressed state, even though the
button was released.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-24 20:30:09 +02:00
Chris Blake
43b8e5b120 mpc85xx: Use uncompressed kernel on the HiveAP-330
It seems that newer builds of OpenWRT have a gzip kernel
larger than 2MB~, which for some reason fails to boot on this board.

However, we have 8MB of kernel space and currently the uncompressed
kernel is 6.5MB~, so we have some space to grow until a better
solution is worked out.

Before:
 ## Booting kernel from Legacy Image at ee840000 ...
  Image Name:   Linux-4.19.53
  Created:      2019-06-22  11:17:48 UTC
  Image Type:   PowerPC Linux Kernel Image (gzip compressed)
  Data Size:    2315724 Bytes =  2.2 MB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
 ## Loading init Ramdisk from Legacy Image at 02000000 ...
  Image Name:   OpenWrt fake ramdisk
  Created:      2019-06-22  11:17:48 UTC
  Image Type:   PowerPC Linux RAMDisk Image (uncompressed)
  Data Size:    0 Bytes =  0 kB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
 ## Flattened Device Tree blob at ec000000
  Booting using the fdt blob at 0xec000000
  Uncompressing Kernel Image ... Error: Bad gzipped data
  GUNZIP: uncompress, out-of-mem or overwrite error -
	must RESET board to recover
  Loading Ramdisk to 10000000, end 10000000 ... OK
  Loading Device Tree to 00ffa000, end 00fffc78 ... OK
  ft_fixup_l2cache: FDT_ERR_NOTFOUND

After:
 ## Booting kernel from Legacy Image at ee840000 ...
  Image Name:   POWERPC OpenWrt Linux-4.19.53
  Created:      2019-06-22  11:17:48 UTC
  Image Type:   PowerPC Linux Kernel Image (uncompressed)
  Data Size:    6724584 Bytes =  6.4 MB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
 ## Loading init Ramdisk from Legacy Image at 02000000 ...
  Image Name:   OpenWrt fake ramdisk
  Created:      2019-06-22  11:17:48 UTC
  Image Type:   PowerPC Linux RAMDisk Image (uncompressed)
  Data Size:    0 Bytes =  0 kB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
 ## Flattened Device Tree blob at ec000000
  Booting using the fdt blob at 0xec000000
  Loading Kernel Image ... OK
  OK
  Loading Ramdisk to 10000000, end 10000000 ... OK
  Loading Device Tree to 00ffa000, end 00fffc78 ... OK

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [75 cpl limit]
2019-06-24 20:28:33 +02:00
Jeff Kletsky
a471d8c595 ipq40xx: Linksys: sysupgrade: Ensure OEM volumes are removed
When OEM volumes are present in the [alt_]firmware partition,
sysupgrade will write a new kernel, but will fail to write
the root file system. The next boot will hang indefinitely

    Waiting for root device /dev/ubiblock0_0...

Modified ipq40xx/base-files/lib/upgrade/linksys.sh
to remove both `squashfs` and `ubifs` if found
on the target firmware partition's UBI device.

Run-tested-on: Linksys EA8300

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[applied some shellcheck suggestions as well]
2019-06-24 20:28:33 +02:00
Koen Vandeputte
b8fc9c1580 kernel: bump 4.14 to 4.14.129
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-24 16:40:01 +02:00
Kevin Darbyshire-Bryant
7888adb0aa kernel: update act_ctinfo
Follow upstream changes - header file changes
no executable  difference at all

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 5273fb6b21)
2019-06-20 21:18:19 +01:00
Adrian Schmutzler
136c8a889f ath79: Add SUPPORTED_DEVICES for Archer C7 v1/v2
The identifier for both devices is "archer-c7" on ar71xx, set here:
https://github.com/openwrt/openwrt/blob/master/target/linux/ar71xx/base-files/lib/ar71xx.sh#L348
https://github.com/openwrt/openwrt/blob/master/target/linux/ar71xx/base-files/lib/ar71xx.sh#L511

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-06-20 20:09:32 +02:00
Koen Vandeputte
9ed98198cb kernel: bump 4.14 to 4.14.128
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-20 15:50:00 +02:00
Henryk Heisig
76c963bb01 ar71xx: base-files: fix board detect on new MikroTik devices
Move all MikroTik devices to new function to increase script execution
speed.

Machine name in new version of MikroTik RouterBOARD devices add "RB"
before model name:

 Old machine name: MikroTik RouterBOARD 951Ui-2nD
 New:              MikroTik RouterBOARD RB951Ui-2nD

So this patch should fix it for all currently supported MikroTik boards.

Tested-by: Cezary Jackiewicz <cezary@eko.one.pl> [wAP R-2nD]
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[rebased,commit message facelift,script fixes]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[spotted missing 922UAGS-5HPacD]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-19 08:44:28 +02:00
Koen Vandeputte
17fc5375f0 kernel: bump 4.14 to 4.14.127
Refreshed all patches.

Fixes:

- CVE-2019-11479
- CVE-2019-11478
- CVE-2019-11477

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-18 14:49:13 +02:00
Koen Vandeputte
c26420b914 kernel: bump 4.14 to 4.14.126
Refreshed all patches.

Altered patches:
- 816-pcie-support-layerscape.patch

This patch also restores the initial implementation
of the ath79 perfcount IRQ issue. (78ee6b1a40)
It was wrongfully backported upstream initially and got reverted now.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-18 11:41:38 +02:00
George Amanakis
1d1dca45ea mvebu: fixes commit 4089df4f4b
err_free_stats has been deprecated. Replace with err_netdev.

Compile-tested on: mvebu
Runtime-tested on: mvebu

Fixes: 4089df4f4b ("kernel: bump 4.14 to 4.14.125 (FS#2305 FS#2297)")
Signed-off-by: George Amanakis <gamanakis@gmail.com>
[altered hashes]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 1e3800df18)
2019-06-17 10:45:37 +02:00
Rafał Miłecki
4fce09c1ec kernel: backport 4.18 patch adding DMI_PRODUCT_SKU
It's needed for applying some hardware quirks. This fixes:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c:60:20: error: 'DMI_PRODUCT_SKU' undeclared here (not in a function); did you mean 'DMI_PRODUCT_UUID'?
    DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T8"),

Fixes: c52054e568 ("mac80211: brcm: backport remaining brcmfmac 5.2 patches")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 4d11c4c378)
2019-06-17 06:57:09 +02:00
Mantas Pucka
8386f975a9 kernel: mt29f_spinand: fix memory leak during page program
Memory is allocated with devm_kzalloc() on every page program
and leaks until device is closed (which never happens).

Convert to kzalloc() and handle error paths manually.

Signed-off-by: Mantas Pucka <mantas@8devices.com>
2019-06-15 00:27:08 +02:00
Koen Vandeputte
4089df4f4b kernel: bump 4.14 to 4.14.125 (FS#2305 FS#2297)
Refreshed all patches.

This bump contains upstream commits which seem to avoid (not properly fix)
the errors as seen in FS#2305 and FS#2297

Altered patches:
- 403-net-mvneta-convert-to-phylink.patch
- 410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch

Compile-tested on: ar71xx, cns3xxx, imx6, mvebu, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-12 15:25:41 +02:00
Daniel Golle
000d400baa kernel: drop everything not on kernel version 4.14
* Remove testing patches for kernel version 4.19
 * remove targets ar7, ixp4xx, orion
Those targets are still on kernel 4.9, patches for 4.14 were not ready
in time. They may be readded once people prepare and test patches for
kernel 4.14.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-06-12 01:18:52 +02:00
Kristian Evensen
86b6d31e6e ramips: Remove redundant LED-cases
01_leds has several redundant LED-cases. This commit cleans
up the file by merging these cases into shared cases.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2019-06-10 11:25:47 +02:00
Adrian Schmutzler
fde0abf267 ath79: Add support for TP-Link Archer C25 v1
The TP-Link Archer C25 is a low-cost dual-band router.

Specification:

- CPU: Atheros QCA9561 775 MHz
- RAM: 64 MB
- Flash: 8 MB
- Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887
- NET: 5x 10/100 Mbps Ethernet

Some LEDs are controlled by an additional 74HC595 chip, but not
all of them as e.g. for the C59.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-06-10 11:25:47 +02:00