Commit Graph

52375 Commits

Author SHA1 Message Date
Matthew Hagan
6f39649555 firmware-utils: mkmerakifw-old: Add le32 support
mkmerakifw-old was created for the z1 which uses the AR9344 SoC with
be32 addressing. The MX64/MX65 devices use the same header style, however
these boards use a BCM NSP SoC with le32 addressing.

Since we may be booting initramfs images with this header, which may be
of any size, within reason, board->imagelen is set to 0. The kernel
image shoule be limited in the image Makefile.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-31 12:39:53 +02:00
Rafał Miłecki
f55f1dbaad bcm53xx: switch to the kernel 5.10
With PCI and USB regressions fixed it should be safe to switch now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-31 11:41:09 +02:00
Rafał Miłecki
9b40346328 bcm53xx: fix kmod-i2c-bcm-iproc for kernel 5.10
I2C_BCM_IPROC selects I2C_SLAVE which in turn makes two new symbols
available: I2C_SLAVE_EEPROM and I2C_SLAVE_TESTUNIT. That was causing:

I2C support (I2C) [M/n/y/?] m
  Enable compatibility bits for old user-space (I2C_COMPAT) [N/y/?] n
  I2C device interface (I2C_CHARDEV) [M/n/?] m
  I2C bus multiplexing support (I2C_MUX) [N/m/?] n
  Autoselect pertinent helper modules (I2C_HELPER_AUTO) [N/y/?] n
    SMBus-specific protocols (I2C_SMBUS) [N/m/?] n
  I2C/SMBus Test Stub (I2C_STUB) [N/m/?] n
  I2C slave support (I2C_SLAVE) [Y/?] y
    I2C eeprom slave driver (I2C_SLAVE_EEPROM) [N/m/?] n
    I2C eeprom testunit driver (I2C_SLAVE_TESTUNIT) [N/m/?] (NEW)

Ideally I2C_SLAVE should probably be packaged as kmod-i2c-slabe. For now
just modify kmod-i2c-bcm-iproc to fix kernel compilation.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-31 11:41:04 +02:00
Rafał Miłecki
62465c75be bcm53xx: fix USB in kernel 5.10
This makes USB controller driver work with USBs that are always powered
on (don't require toggling any GPIO).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-31 09:34:40 +02:00
Rosen Penev
a235b41792 libjson-c: remove old math patch
Remove old math patch meant for old GCC versions. It's not needed
for GCC and causes issues with clang.

Add CMake patch to identify clang properly and apply the proper
flags. Fixes the following warnings/errors:

json_pointer.c:230:7: warning: implicit declaration of function
'vasprintf' is invalid in C99 [-Wimplicit-function-declaration]
        rc = vasprintf(&path_copy, path_fmt, args);
             ^
json_pointer.c:317:7: warning: implicit declaration of function
'vasprintf' is invalid in C99 [-Wimplicit-function-declaration]
        rc = vasprintf(&path_copy, path_fmt, args);
             ^
/usr/include/bits/mathcalls.h:177:23: error: cannot redeclare builtin
function '__builtin_isinf'
__MATHDECL_ALIAS (int,isinf,, (_Mdouble_ __value), isinf)
                      ^
/usr/include/bits/mathcalls.h:177:23: note: '__builtin_isinf' is a
builtin with type 'int ()'
/usr/include/bits/mathcalls.h:213:23: error: cannot redeclare builtin
function '__builtin_isnan'
__MATHDECL_ALIAS (int,isnan,, (_Mdouble_ __value), isnan)

The clang patch is an upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-08-30 19:16:49 -10:00
Alexander Couzens
c39be8e7a4
ramips: minew g1-c: use default static address for lan instead of dhcp
As Adrian Schmutzler suggested on github [1] the device should follow the
default behaviour on ethernet using a static address instead using dhcp.

[1] 8d497b6570

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2021-08-31 02:42:32 +02:00
Daniel Golle
3e16866f39
procd: update to git HEAD
96d8bf2 trace: fix potential use-after-free occurence
 8eb1d78 initd: fix off-by-one error in mkdev.c
 86f82f3 utils: don't ignore open() return value
 f5fe04b jail: actually check calloc return value
 269c9e4 trace: preload: avoid NULL-dereference here as well

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-31 00:52:47 +01:00
Daniel Golle
25cb37bc00
procd: update to git HEAD
df251c2 uxc: move mountpoint of persistent config to /var/run/uxc
 e5b38fd trace: free memory allocated by blobmsg_format_json_indent()

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-30 20:36:11 +01:00
Kevin Darbyshire-Bryant
a7aa237c28 wireguard-tools: bump to 20210424
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-08-30 08:28:17 +01:00
Rafał Miłecki
8a4d4d4243 bcm53xx: backport missed DT patch cleaning up CRU block
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-30 09:00:28 +02:00
Sungbo Eo
f08b76b32f ramips: w2914ns-v2: consolidate leds nodes into dtsi
w2914ns-v2, 11acnas, and freezio use almost same board and thus share a
common dtsi file. Now that LED labels do not contain "devicename" since
commit c846dd91f0 ("ramips: remove model name from LED labels"), let's
move the leds nodes to dtsi and remove them from dts.

Note that freezio has only one USB 3.0 port and adding &ehci_port2 trigger
does not incur any visible changes.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-08-30 00:37:47 +02:00
Adrian Schmutzler
aec97b31ea ramips: provide default BLOCKSIZE for Device/seama
The Device/seama shared definition requires BLOCKSIZE, so it should
have a default value for this variable.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-30 00:37:47 +02:00
Filip Matijević
e2b03c16eb ipq806x: add missing enclosing partitions block for TP-Link C2600
The partitions that have compatible property set are skipped by mtd if
they are not contained inside a partitions node and this breaks
fetching MAC address from "default-mac" partition.

Fix this by defining all the partitions inside partitions node with
compatible = "fixed-partitions" as nvmem requires the standard
partitions scheme to work correctly.

Fixes: FS#3945
Fixes: cd36d71655 ("ipq806x/dts: Add Archer C2600 DTS")
Fixes: 0458a8993c ("ipq806x: convert mtd-mac-address to nvmem
implementation")

Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com>
Reviewed-by: Ansuel Smith <ansuelsmth@gmail.com>
[adjust commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-30 00:37:35 +02:00
Adrian Schmutzler
d37125b3f3 ath79: remove redundant BLOCKSIZE of 64k from devices
BLOCKSIZE = 64k is set in Device/Default, i.e. global default on
the target.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-30 00:37:35 +02:00
Rafał Miłecki
bce00f47e5 bcm53xx: backport the latest upstream DT changes
This includes:
1. BCM5301X changes from 5.14 and queued 5.15 stuff
2. NSP changes from 5.11 - 5.15 for kernel 5.10

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-29 22:57:13 +02:00
Rui Salvaterra
505b7a2d08 kernel: move two symbols to the generic kconfigs
CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them
to the generic kconfigs. And resort the generic kconfigs while at it.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-29 17:07:19 +02:00
Rui Salvaterra
7e135add24 kernel: disable CONFIG_RCU_EXPERT and friends
Based on the existing documentation [1][2], I dare anyone to demonstrate that
we need to fine-tune these RCU parameters. The (performance) breakage potential
for doing so is immense, so let's just please put down this loaded footgun.

Disable CONFIG_RCU_EXPERT and its dependent symbols. Additionally, remove the
CONFIG_RCU_EXPERT symbol from the target kconfigs which contain it.

[1] https://www.kernel.org/doc/Documentation/RCU/Design/Data-Structures/Data-Structures.html
[2] https://lwn.net/Articles/777214/

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-29 17:03:38 +02:00
Ansuel Smith
b8f8d0651c kernel: fix warning about unused try_to_force_load
There is a longlasting warn about unused defined try_to_force_load.
Fix this by including this function only when actually used.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-08-29 16:31:24 +02:00
John Audia
be7e0091fe kernel: bump 5.4 to 5.4.143
Manually rebased:
  bcm27xx/patches-5.4/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch

Removed upstreamed:
  mvebu/patches-5.4/100-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2021-08-29 16:31:02 +02:00
John Audia
6b1cd3e345 kernel: bump 5.10 to 5.10.61
Manually rebased:
  bcm27xx/patches-5.10/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch

Removed upstreamed:
  mvebu/patches-5.10/101-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2021-08-29 16:30:20 +02:00
Sebastian Schaper
1c8214d6f2 ath79: fix spelling of DEVICE_MODEL for D-Link DAP-2695
Change `DAP-2965` to `DAP-2695` for device selection in menuconfig.

Fixes: cd09f26660 ("ath79: add support for D-Link DAP-2695-A1")

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
[add Fixes]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-28 13:24:23 +02:00
David Bauer
90e167abaa ramips: add label-mac for TL-MR3020 v3
The TP-Link TL-MR3020 v3 only has a single MAC address assigned for
ethernet LAN as well as WiFi. This MAC address is also printed on the
casing.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:35:02 +02:00
David Bauer
9c965893ed ramips: enable fast-read for TL-MR3020 v3
The GigaDevices GD25Q64B found on the TL-MR3020 v3 supports the fast
read instruction. Add the required DT property in order to enable usage
of this property.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:45 +02:00
David Bauer
db3545cd02 ramips: increase SPI frequency for TL-MR3020 v3
The GigaDevices GD25Q64B supports higher SPI clocks than 10 MHz. While
100 MHz do not work reliably, 50 MHz works without issues.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:36 +02:00
David Bauer
161ee85bbe ramips: fix input type for TL-MR3020 v3
The modec{1,2} keys are actually switches.

Add the respective DTS properties to avoid accidental activation of
failsafe mode.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:29 +02:00
David Bauer
ec2078e3ef hostapd: enable proxy-arp support for hostapd-full
The hostapd.sh script already has support for configuring proxy-ARP,
however no built variant has support for it enabled.

Enable proxy-ARP support for hostapd-full builds in order to allow users
to actually use this feature.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:15 +02:00
David Bauer
7073e88a76 hostapd: fix Proxy-ARP with Hotspot 2.0 disabled
The disable_dgaf config fiels is only available in case Hostapd is
compiled with Hotspot 2.0 support, however Proxy-ARP does not depend on
Hotspot 2.0.

Only add the code related to this config field when Hotspot 2.0 is
enabled to fix compilation with the aformentioned preconditions.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:15 +02:00
David Bauer
99786e121b hostapd: refresh patches
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-28 01:31:15 +02:00
Daniel Golle
cf40141b51
kernel: properly handle paging errors in fit partition parser
The uImage.FIT partition uses page mapping without properly handling
paging errors. This can lead to Kernel Oops in case of read errors
while trying to parse uImage.FIT partitions.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-27 21:32:43 +01:00
Chuanhong Guo
97e32e9702 mediatek: mt7623: replace kconfig symbol for snand driver
this change was missing during the spi-nand driver replacement, causing
build failure.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 22:22:29 +08:00
Chuanhong Guo
472437b93f mediatek: mt7629: manually add missing kconfig
These options doesn't show up unless some kernel packages are selected,
so they are not covered by kernel_menuconfig.
Manually add them so that a build with all kmods can pass without user
interaction.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 15:54:53 +08:00
Chuanhong Guo
8f2cace0b7 mediatek: mt7629: build with linux 5.10
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 10:26:25 +08:00
Chuanhong Guo
9abd2fb6c4 mediatek: bmt: set default bmt oob offset to 0
there's no driver level remapping of oob data in the new spi-nand
driver and bmt oob signature starts at 0x0 of the dumped oob data.
change the default value to 0 for the new spi-nand driver.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 10:26:25 +08:00
Chuanhong Guo
388127abd1 mediatek: mtk-snand: check request size against chip info
mtd->size will be overrided by BMT which makes all mtd requests made by
bmt fail in request size checking.
this commit changes the driver to check against actual chip size in chip
info as a workaround.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 10:26:25 +08:00
Chuanhong Guo
b600aee3ed mediatek: attach bmt to the new snand driver
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 10:26:25 +08:00
Chuanhong Guo
01b452fe2d mediatek: change dts to use the new snand driver
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 10:26:25 +08:00
Chuanhong Guo
c6ed31630d mediatek: remove spi-nand hacks from 5.10
we now have a standalone mtd driver and the old spi-mem driver along
with the hack in spi-nand core can be removed.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 10:26:25 +08:00
Weijie Gao
e8e8487603 mediatek: enable new spi-nand driver for kernel 5.10
This patch enables new spi-nand driver for mt7622 and mt7629.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-08-27 10:26:25 +08:00
Weijie Gao
050621aa01 mediatek: add a new spi-nand driver for kernel 5.10
This patch adds a new spi-nand driver which implements the SNFI of mt7622
and mt7629.

Unlike the existing snfi driver which makes use of the spi-mem framework
and the spi-nand framework with modified ecc support, this driver is
implemented directly on the mtd framework with other components untouched,
and provides better performance, and behaves exactly the same as the nand
framework.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
2021-08-27 10:26:24 +08:00
Eneas U de Queiroz
7119fd32d3 openssl: bump to 1.1.1l
This version fixes two vulnerabilities:
  - SM2 Decryption Buffer Overflow (CVE-2021-3711)
    Severity: High

  - Read buffer overruns processing ASN.1 strings (CVE-2021-3712)
    Severity: Medium

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2021-08-26 21:37:20 +02:00
Christian Lamparter
d24efa92e1 ath9k: owl-loader: remove obsolete AR71XX patch
this is no longer necessary as the AR71XX target
was superseded by ath79.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-08-26 21:37:19 +02:00
Christian Lamparter
a1bd8109f0 ath79: remove obsolete pci-ath9k-fixup.[c,h] files
This was old code from the AR71XXs target days that
doesn't get compiled and used anymore.

Bringing up AR92xx and earlier chips from their
OWL-Emulator state is currently done by the upstream
ath9k-pci-owl-loader module. (see the kmod-owl-loader
package).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-08-26 21:00:26 +02:00
Christian Lamparter
2b0378cf9f gpio-button-hotplug: convert to gpio descriptor (gpiod_) API
OpenWrt's special gpio-button-hotplug driver is still using
exclusively the legacy GPIO Subsystem gpio_ API.

While it still does work fine for most devices, upstream
linux is starting to convert platform support like that of
the APU2/3/4 to the new GPIOD LOOKUP tables that are not
supported by it.

Hence, this patch replaces the gpio_ calls present in
gpio-button-hotplug with gpiod_ equivalent wherever
it's possible. This allows the driver to use the
gpiod lookup tables and still have a fallback for
legacy platform data code that just sets button->gpio
set to the real button/switch GPIO.

As a bonus: the active_low logic is now being handled
by the linux's gpio subsystem too. Another issue that
was address is the of_handle leak in the dt parser
error path.

Tested with legacy platform data: x86_64: APU2, MX-100
Tested on OF: ATH79; MR18, APM821xx: Netgear WNDR4700,
	      RAMIPS: WL-330N3G
	      LANTIQ: AVM FritzBox 7360v1

Reported-by: Chris Blake <chrisrblake93@gmail.com>
Tested-by: Chris Blake <chrisrblake93@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-08-26 21:00:26 +02:00
Jan-Niklas Burfeind
d98738b5c1 ath79: add support for onion omega
The Onion Omega is a hardware development platform with built-in WiFi.

https://onioniot.github.io/wiki/

Specifications:
 - QCA9331 @ 400 MHz (MIPS 24Kc Big-Endian Processor)
 - 64MB of DDR2 RAM running at 400 MHz
 - 16MB of on-board flash storage
 - Support for USB 2.0
 - Support for Ethernet at 100 Mbps
 - 802.11b/g/n WiFi at 150 Mbps
 - 18 digital GPIOs
 - A single Serial UART
 - Support for SPI
 - Support for I2S

Flash instructions:
The device is running OpenWrt upon release using the ar71xx target.
Both a sysupgrade
and uploading the factory image using u-boots web-UI do work fine.

Depending on the ssh client, it might be necessary to enable outdated
KeyExchange methods e.g. in the clients ssh-config:

Host 192.168.1.1
        KexAlgorithms +diffie-hellman-group1-sha1

The stock credentials are: root onioneer

For u-boots web-UI manually configure `192.168.1.2/24` on your computer,
connect to `192.168.1.1`.

MAC addresses as verified by OEM firmware:
2G       phy0      label
LAN      eth0      label - 1

LAN is only available in combination with an optional expansion dock.

Based on vendor acked commit:
commit 5cd49bb067 ("ar71xx: add support for Onion Omega")

Partly reverts:
commit fc553c7e4c ("ath79: drop unused/incomplete dts")

Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
2021-08-26 15:07:18 +02:00
Felix Fietkau
3ebbf795df ustp: add OpenWrt STP/RSTP daemon
This integrates with netifd in order to provide STP/RSTP protocol support
in user space. It defaults to using RSTP for bridges with stp enabled.
This daemon has no config files, it uses the configuration passed from
netifd via ubus

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-08-26 13:27:27 +02:00
Daniel Golle
364bd887a1
fstools: update to git HEAD
50e6b20 libfstools: handle open() return value properly in F2FS check
 e1b6811 blockd: include missing libubox/utils.h

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-25 22:49:00 +01:00
Álvaro Fernández Rojas
4ab0b5fabd bmips: backport accepted watchdog patch
This patch has been accepted for linux v5.14.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-25 10:24:33 +02:00
David Yang
38cb500516 ramips: expose ephy leds for miwifi-mini
Give users more control by exposing ephy leds.

Signed-off-by: David Yang <mmyangfl@gmail.com>
[remove execute bit on 01_leds, add status for gpio2]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-25 01:42:17 +02:00
David Yang
5ed11012e7 ramips: lock u-boot partition and unlock u-boot-env for miwifi-mini
Generally u-boot should keep read-only to avoid mis-overwriting and
bricking the device, but u-boot-env could be safely modified with u-boot
setenv tool.

Signed-off-by: David Yang <mmyangfl@gmail.com>
2021-08-25 01:42:17 +02:00
David Yang
a6c410ae10 ramips: increase flash freq for miwifi-mini
The flash is Winbond 25Q128. As it has large rom, better to increase flash
frequency to 70MHz according to the flash spec and enable fast-read.

Signed-off-by: David Yang <mmyangfl@gmail.com>
2021-08-25 01:42:17 +02:00