Commit Graph

7262 Commits

Author SHA1 Message Date
Florian Fainelli
7e0c80bcb6 kernel: make kmod-of-i2c available for the mvebu target
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35060
2013-01-08 22:20:25 +00:00
Florian Fainelli
85fbe13cf5 kernel: adjust orion/kirkwood packages to also build for mvebu target
Armada XP/370 boards share these hardware blocks with Orion and Kirkwood
SoCs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35059
2013-01-08 22:20:21 +00:00
Florian Fainelli
c38cb63808 kernel: add more SCTP related configuration symbols
These symbols are used by 3.8+ kernels

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35054
2013-01-08 22:18:23 +00:00
Felix Fietkau
3b27974c7a mac80211: apply network interface configuration for adhoc + wpa2
SVN-Revision: 35049
2013-01-07 21:12:33 +00:00
Florian Fainelli
ebc47a91eb ncurses: fix typo on INSTALL_LIBSTDCPP configuration symbol
Thanks to kyak for spotting this

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35047
2013-01-07 18:19:31 +00:00
Mirko Vogt
d73104d680 fix typo in Makefile
Thanks to Stefan Hellermann for pointing this out!

SVN-Revision: 35042
2013-01-07 17:11:15 +00:00
Felix Fietkau
539b5ac46d libubox: update to latest version, contains several uloop/ustream fixes
SVN-Revision: 35039
2013-01-07 15:25:03 +00:00
Mirko Vogt
12a6622bd9 This patch updates uboot-xburst from 2009.11 to 2012.10-rc2 - Ingenic SoC support went upstream
Summary:
* remove all files/* (since merged to upstream)
* patches on nand-spl, mmc and lcd driver

Thanks a lot to Xiangfu Liu!

Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>

SVN-Revision: 35034
2013-01-07 14:10:01 +00:00
Vasilis Tsiligiannis
c86485210b zram-swap: Install init script with 0755 mode
SVN-Revision: 35033
2013-01-07 12:01:11 +00:00
Jo-Philipp Wich
cedbe66e9a kernel: fix kmod-ipsec load order ()
SVN-Revision: 35032
2013-01-07 10:54:56 +00:00
Hauke Mehrtens
7223068536 zram-swap: make the zram init.d executable
SVN-Revision: 35028
2013-01-06 20:23:49 +00:00
Hauke Mehrtens
7a39e7860a compcache: remove package, use zram-swap instead
SVN-Revision: 35026
2013-01-06 17:14:53 +00:00
Hauke Mehrtens
bef592844b zram: add package to use compressed ram disk for swap
The busybox size is increased by 3.2KByte uncompressed on bcm47xx with
this commit.

This zram-swap automatically creates a zram device, a swap partition on
it and make the kernel swap pages to it.

Thank you Bastian Bittorf <bittorf@bluebottle.com> for idea and the
script.

SVN-Revision: 35025
2013-01-06 16:21:29 +00:00
Felix Fietkau
82b3e879d4 kernel: add a module for the isl1208 rtc
SVN-Revision: 35022
2013-01-06 15:09:43 +00:00
John Crispin
e6aac19237 fix regmap debloat patch
SVN-Revision: 35015
2013-01-05 00:20:05 +00:00
Felix Fietkau
ba21190710 mac80211: add dependency of PACKAGE_MAC80211_DEBUGFS
I wanted to use some statistics from /sys/kernel/debug/ieee80211,
so I enabled PACKAGE_MAC80211_DEBUGFS.  But I could not use it,
because CONFIG_KERNEL_DEBUG_FS was not set and it's a little bit
hidden. After manually setting CONFIG_KERNEL_DEBUG_FS to y,
everything was fine. This patch automatically selects
CONFIG_KERNEL_DEBUG_FS if PACKAGE_MAC80211_DEBUGFS is set.

Additionally, the help text says "Say N unless you know you need this.",
but it's default y. This help text is copied verbatim from the
kernel's Kconfig and not true for us. So remove this part of the
help text

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>

SVN-Revision: 35014
2013-01-04 17:41:23 +00:00
Felix Fietkau
3b4931ef4d uci: update to latest version, adds list delete, removes unused plugin support
SVN-Revision: 35013
2013-01-04 16:10:17 +00:00
Steven Barth
b077480a59 firewall: Add ULA site border for IPv6 traffic This prevents private traffic from leaking out to the internet
SVN-Revision: 35012
2013-01-04 15:59:28 +00:00
Jo-Philipp Wich
3b7882e775 iwinfo: don't use the txpower value from debugfs for now, it does not match the values reported via wext
SVN-Revision: 35007
2013-01-04 14:08:08 +00:00
John Crispin
ff0c7a9ec9 don't depend on lua
Delete +lua from libiwinfo-lua.

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>

SVN-Revision: 35005
2013-01-04 09:32:06 +00:00
Hauke Mehrtens
e8c86dd070 mac80211: b43: add firmware for HT-PHY by default.
remove firmware for LP-Phy core rev 14, I have never seen such a device.

SVN-Revision: 35000
2013-01-03 18:52:08 +00:00
Felix Fietkau
96f3911981 kernel: move regmap bloat out of the kernel image if it is only being used in modules
SVN-Revision: 34999
2013-01-03 18:39:50 +00:00
Felix Fietkau
1dada293bf add kmod-fs-configfs to replace kernel bloat added by selecting kmod-mmc-over-gpio
SVN-Revision: 34998
2013-01-03 18:04:04 +00:00
Hauke Mehrtens
ac383f95a5 broadcom-diag: add diag support for Linksys E1000 V1
This adds diag leds/buttons support for Linksys E1000 V1. It worked on
my router, however it may need some tweaking by people more familiar
with openwrt and c to make it fit for commiting.

Thank you hhm for this patch.

SVN-Revision: 34996
2013-01-03 02:07:11 +00:00
Hauke Mehrtens
8f6bdcffa1 brcm47xx: build b44 as a module
SVN-Revision: 34994
2013-01-03 02:00:25 +00:00
Hauke Mehrtens
d8f1fa1e38 switch: ROBO Switch Gigabit MII Support
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD.  This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.

In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex.  I was not able to isolate the source of the problem
(this patch, driver or H/W limitation).  The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).

I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34992
2013-01-03 01:58:01 +00:00
Hauke Mehrtens
63ec34612c switch: improve error messages
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34991
2013-01-03 01:57:19 +00:00
Hauke Mehrtens
25afeba608 brcm47xx: add a new version of the nvram rewrite patch
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
2013-01-03 01:53:30 +00:00
Steven Barth
965afef317 ipv6-support: Update iteration * Add support for blocking forwarding while address assignments * Fix relay restarting function
SVN-Revision: 34985
2013-01-02 23:05:44 +00:00
Steven Barth
c7d9d7c952 odhcp6c: Add support for SNTP and SIP options
SVN-Revision: 34984
2013-01-02 23:05:39 +00:00
Steven Barth
4a2e55f30f 6relayd: Announce RDNSS and DNSSL via RA
SVN-Revision: 34983
2013-01-02 23:05:35 +00:00
Jo-Philipp Wich
1683a146f4 iwinfo: replace more wext calls with nl80211 equivalents, attempt to infer nl80211 tx power from debugfs before querying wext
SVN-Revision: 34982
2013-01-02 19:10:29 +00:00
Felix Fietkau
8447af36e3 ath9k: disable TX_IQ_ON_AGC_CAL on AR934x, should improve stability
SVN-Revision: 34979
2013-01-02 17:37:30 +00:00
Jo-Philipp Wich
70b0ef6322 sysupgrade: clarify online help
Fixes .

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 34975
2013-01-02 16:21:30 +00:00
Jo-Philipp Wich
58070b0083 sysupgrade: do not require an extra argument after --restore-backup
Neither --create-backup nor --restore-backup need an image name (following
the backup filename). Treat them in uniform way.

Mostly fixes .

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 34974
2013-01-02 16:21:26 +00:00
Jo-Philipp Wich
54c0b40427 dnsmasq: allow dhcp host entries without mac addresses ()
SVN-Revision: 34971
2013-01-02 15:14:19 +00:00
Jo-Philipp Wich
c8a8f8fd55 lldpd: various enhancements
- introduce "list interface" options to specify the ifaces to listen on, takes uci- or network device name
	- set the default system description to distrib @ hostname, e.g. "OpenWrt Barrier Breaker r34744 @ vbox"
	- introduce "option lldp_description" to override the automatically generated description

SVN-Revision: 34970
2013-01-02 14:35:43 +00:00
John Crispin
a730e96569 Remove remaining etrax references
SVN-Revision: 34968
2013-01-02 11:28:11 +00:00
John Crispin
075ea0d52e fix typo in HFS kernel module
Signed-off-by: Ian Leonard <antonlacon@gmail.com>

SVN-Revision: 34963
2013-01-02 10:29:45 +00:00
John Crispin
15e29f3d9b fixes libertas firmware install path
fixes 

SVN-Revision: 34961
2013-01-02 10:08:54 +00:00
John Crispin
12f36652e6 fix video modules package generation
The folder layout changed between 3.6 and 3.7

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 34960
2013-01-02 09:43:07 +00:00
Steven Barth
7a25be66c3 6relayd: Detect changes of default routes for RAs
SVN-Revision: 34958
2013-01-01 21:41:37 +00:00
Steven Barth
def80bbecf ipv6-support: Remove unnecessary code
SVN-Revision: 34957
2013-01-01 21:41:32 +00:00
Gabor Juhos
cbc9dfc56a package/kernel: select crypto-sha256 for cifs on 3.7+
Based on a patch from 

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34956
2013-01-01 19:04:20 +00:00
Gabor Juhos
ab4ea8ad16 package/kernel: create separate package for the sha256 crypto module
Based on a patch from 

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34955
2013-01-01 19:04:17 +00:00
Steven Barth
4c09d5dde3 ipv6-support: Fix typo in dhcpv6-script * thanks to KarlHegbloom for reporting
SVN-Revision: 34940
2012-12-31 09:38:59 +00:00
Hauke Mehrtens
1d50d60fc0 rtc-rv5c386a: fix compilation for kernel >= 3.4
SVN-Revision: 34938
2012-12-30 15:32:53 +00:00
Hauke Mehrtens
190c566210 acx-mac80211: fix compilation
Some header files from mac80211 are now moved to the uapi dir.

SVN-Revision: 34937
2012-12-30 15:28:28 +00:00
Felix Fietkau
fc760260dd uci: disable parallel builds again, the lua<->libuci dependency is not safe
SVN-Revision: 34936
2012-12-30 14:58:37 +00:00
Steven Barth
b7c1f24f9b ipv6-support: Use more consistent default values
SVN-Revision: 34913
2012-12-29 10:12:31 +00:00