mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
switch: ROBO Switch Gigabit MII Support
I wrote this patch some time ago because I had a need for one of the Gigabit ports (Linksys E3000) to be forced to 100FD. This is based on the robocfg sources included w/ the RT-N16 sources from ASUS. Since work is progressing on a BGMAC driver that could be included in OpenWRT, this may be useful to someone else. In testing, forcing the speed to 10/100 or 1000 worked fine; however, when trying to force full-duplex mode, the result was always half-duplex. I was not able to isolate the source of the problem (this patch, driver or H/W limitation). The only way I could get it to work was to set the port to Auto, but then only advertise 100FD (not included in this patch). I have a modified version of the robocfg package as well, I'd have to clean it up a little first (remove the full-duplex hack) before submitting it if there is interest. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34992
This commit is contained in:
Hauke Mehrtens
parent
63ec34612c
commit
d8f1fa1e38
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
|
||||
include $(INCLUDE_DIR)/kernel.mk
|
||||
|
||||
PKG_NAME:=kmod-switch
|
||||
PKG_RELEASE:=5
|
||||
PKG_RELEASE:=6
|
||||
|
||||
include $(INCLUDE_DIR)/package.mk
|
||||
|
||||
|
||||
@ -15,9 +15,10 @@
|
||||
#define __BCM535M_H_
|
||||
|
||||
/* ROBO embedded device type */
|
||||
#define ROBO_DEV_5380 1
|
||||
#define ROBO_DEV_5365 2
|
||||
#define ROBO_DEV_5350 3
|
||||
#define ROBO_DEV_5380 1
|
||||
#define ROBO_DEV_5365 2
|
||||
#define ROBO_DEV_5350 3
|
||||
#define ROBO_DEV_53115 4
|
||||
|
||||
/* BCM5325m GLOBAL PAGE REGISTER MAP */
|
||||
#ifndef _CFE_
|
||||
@ -316,6 +317,18 @@ typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC
|
||||
#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */
|
||||
#define ROBO_ARL_VID_ENTRY0 0x30 /* ARL VID Entry 0: 64bit */
|
||||
#define ROBO_ARL_VID_ENTRY1 0x32 /* ARL VID Entry 1: 64bit */
|
||||
#define ROBO_ARL_SEARCH_CTRL_53115 0x50 /* ARL Search Control: 8bit */
|
||||
#define ROBO_ARL_SEARCH_ADDR_53115 0x51 /* ARL Search Address: 16bit */
|
||||
#define ROBO_ARL_SEARCH_RESULT_53115 0x60 /* ARL Search Result: 64bit */
|
||||
#define ROBO_ARL_SEARCH_RESULT_EXT_53115 0x68 /* ARL Search Result Extension (53115): 16bit */
|
||||
|
||||
/* BCM5395/5397/5398/53115 */
|
||||
#define ROBO_VTBL_ACCESS 0x60 /* VLAN table access: 8bit */
|
||||
#define ROBO_VTBL_INDX 0x61 /* VLAN table address index: 16bit */
|
||||
#define ROBO_VTBL_ENTRY 0x63 /* VLAN table entry: 32bit */
|
||||
#define ROBO_VTBL_ACCESS_5395 0x80 /* VLAN table access: 8bit */
|
||||
#define ROBO_VTBL_INDX_5395 0x81 /* VLAN table address index: 16bit */
|
||||
#define ROBO_VTBL_ENTRY_5395 0x83 /* VLAN table entry: 32bit */
|
||||
|
||||
/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */
|
||||
#define ROBO_MGMT_FRAME_RD_DATA 0x00 /* Management Frame Read Data :8bit*/
|
||||
@ -342,6 +355,8 @@ typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC
|
||||
#define NUM_VLAN_TABLE_ENTRIES_5350 16 /* number of entries in VLAN table */
|
||||
#define ARL_TABLE_ADDR_5350 0x1c00 /* offset of ARL table start (5350) */
|
||||
#endif
|
||||
#define NUM_ARL_TABLE_ENTRIES_53115 4096 /* number of entries in ARL table (53115) */
|
||||
#define NUM_VLAN_TABLE_ENTRIES_53115 4096 /* number of entries in VLAN table */
|
||||
typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC
|
||||
{
|
||||
unsigned int memAddr:14; /* 64-bit memory address */
|
||||
@ -529,6 +544,7 @@ typedef struct _ROBO_VLAN_CTRL0_STRUC
|
||||
#define VLAN_ID_HIGH_BITS 0 /* static high bits in table access reg */
|
||||
#define VLAN_ID_MAX 255 /* max VLAN id */
|
||||
#define VLAN_ID_MAX5350 15 /* max VLAN id (5350) */
|
||||
#define VLAN_ID_MAX5395 4094 /* max VLAN id (5395) */
|
||||
#define VLAN_ID_MASK VLAN_ID_MAX /* VLAN id mask */
|
||||
#ifdef BCM5380
|
||||
#define VLAN_UNTAG_SHIFT 13 /* for postioning untag bits in write reg */
|
||||
@ -594,26 +610,15 @@ typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350
|
||||
#define ROBO_VLAN_PORT5_DEF_TAG 0x1a /* 16b: VLAN Port 5 Default Tag Register */
|
||||
#define ROBO_VLAN_PORT6_DEF_TAG 0x1c /* 16b: VLAN Port 6 Default Tag Register */
|
||||
#define ROBO_VLAN_PORT7_DEF_TAG 0x1e /* 16b: VLAN Port 7 Default Tag Register */
|
||||
|
||||
/* obsolete */
|
||||
#define ROBO_VLAN_PORT0_CTRL 0x00 /* 16b: Port 0 VLAN Register */
|
||||
#define ROBO_VLAN_PORT1_CTRL 0x02 /* 16b: Port 1 VLAN Register */
|
||||
#define ROBO_VLAN_PORT2_CTRL 0x04 /* 16b: Port 2 VLAN Register */
|
||||
#define ROBO_VLAN_PORT3_CTRL 0x06 /* 16b: Port 3 VLAN Register */
|
||||
#define ROBO_VLAN_PORT4_CTRL 0x08 /* 16b: Port 4 VLAN Register */
|
||||
#define ROBO_VLAN_IM_PORT_CTRL 0x10 /* 16b: Inverse MII Port VLAN Reg */
|
||||
#define ROBO_VLAN_SMP_PORT_CTRL 0x12 /* 16b: Serial Port VLAN Register */
|
||||
#define ROBO_VLAN_PORTSPI_DEF_TAG 0x1c /* 16b: VLAN Port SPI Default Tag Register */
|
||||
#define ROBO_VLAN_PRIORITY_REMAP 0x20 /* 24b: VLAN Priority Re-Map Register */
|
||||
#define ROBO_VLAN_PORT8_DEF_TAG 0x20 /* 16b: VLAN Port 8 Default Tag Register */
|
||||
/* 53115 only */
|
||||
#define ROBO_DUPLEX_STAT_SUMMARY_53115 0x08 /* Duplex Status Summary: 16bit */
|
||||
#define ROBO_JUMBO_PAGE 0x40
|
||||
#define ROBO_JUMBO_CTRL 0x01 /* 32bit */
|
||||
#define ROBO_JUMBO_SIZE 0x05 /* 16bit */
|
||||
|
||||
#ifndef _CFE_
|
||||
#pragma pack()
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* !__BCM535M_H_ */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@ -386,7 +386,7 @@ static int handle_port_media_write(void *driver, char *buf, int nr)
|
||||
int media = switch_parse_media(buf);
|
||||
int reg = adm_rreg(0, port_conf[nr]);
|
||||
|
||||
if (media < 0)
|
||||
if (media < 0 || media & SWITCH_MEDIA_1000)
|
||||
return -1;
|
||||
|
||||
reg &= ~((1 << 1) | (1 << 2) | (1 << 3));
|
||||
|
||||
@ -26,7 +26,7 @@
|
||||
* enable_vlan: "0", "1"
|
||||
* port/<port-number>/
|
||||
* enabled: "0", "1"
|
||||
* media: "AUTO", "100FD", "100HD", "10FD", "10HD"
|
||||
* media: "AUTO", "1000FD", "1000HD", "100FD", "100HD", "10FD", "10HD"
|
||||
* vlan/<port-number>/
|
||||
* ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*")
|
||||
*/
|
||||
@ -305,6 +305,10 @@ int switch_parse_media(char *buf)
|
||||
|
||||
if (strncmp(str, "AUTO", 4) == 0)
|
||||
return SWITCH_MEDIA_AUTO;
|
||||
else if (strncmp(str, "1000FD", 6) == 0)
|
||||
return SWITCH_MEDIA_1000 | SWITCH_MEDIA_FD;
|
||||
else if (strncmp(str, "1000HD", 6) == 0)
|
||||
return SWITCH_MEDIA_1000;
|
||||
else if (strncmp(str, "100FD", 5) == 0)
|
||||
return SWITCH_MEDIA_100 | SWITCH_MEDIA_FD;
|
||||
else if (strncmp(str, "100HD", 5) == 0)
|
||||
@ -322,14 +326,18 @@ int switch_print_media(char *buf, int media)
|
||||
|
||||
if (media & SWITCH_MEDIA_AUTO)
|
||||
len = sprintf(buf, "Auto");
|
||||
else if (media == (SWITCH_MEDIA_1000 | SWITCH_MEDIA_FD))
|
||||
len = sprintf(buf, "1000FD");
|
||||
else if (media == SWITCH_MEDIA_1000)
|
||||
len = sprintf(buf, "1000HD");
|
||||
else if (media == (SWITCH_MEDIA_100 | SWITCH_MEDIA_FD))
|
||||
len = sprintf(buf, "100FD");
|
||||
else if (media == SWITCH_MEDIA_100)
|
||||
len = sprintf(buf, "100HD");
|
||||
len = sprintf(buf, "100HD");
|
||||
else if (media == SWITCH_MEDIA_FD)
|
||||
len = sprintf(buf, "10FD");
|
||||
len = sprintf(buf, "10FD");
|
||||
else if (media == 0)
|
||||
len = sprintf(buf, "10HD");
|
||||
len = sprintf(buf, "10HD");
|
||||
else
|
||||
len = sprintf(buf, "Invalid");
|
||||
|
||||
|
||||
@ -8,6 +8,7 @@
|
||||
#define SWITCH_MEDIA_AUTO 1
|
||||
#define SWITCH_MEDIA_100 2
|
||||
#define SWITCH_MEDIA_FD 4
|
||||
#define SWITCH_MEDIA_1000 8
|
||||
|
||||
typedef int (*switch_handler)(void *driver, char *buf, int nr);
|
||||
|
||||
|
||||
@ -72,6 +72,7 @@ struct robo_switch {
|
||||
char *device; /* The device name string (ethX) */
|
||||
u16 devid; /* ROBO_DEVICE_ID_53xx */
|
||||
bool is_5350;
|
||||
u8 gmii; /* gigabit mii */
|
||||
struct ifreq ifr;
|
||||
struct net_device *dev;
|
||||
unsigned char port[6];
|
||||
@ -147,7 +148,7 @@ static int robo_reg(__u8 page, __u8 reg, __u8 op)
|
||||
|
||||
printk(KERN_ERR PFX "timeout in robo_reg on page %i and reg %i with op %i.\n", page, reg, op);
|
||||
|
||||
return 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*
|
||||
@ -173,7 +174,7 @@ static __u32 robo_read32(__u8 page, __u8 reg)
|
||||
{
|
||||
robo_reg(page, reg, REG_MII_ADDR_READ);
|
||||
|
||||
return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) +
|
||||
return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) |
|
||||
(mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
|
||||
}
|
||||
|
||||
@ -188,21 +189,40 @@ static void robo_write16(__u8 page, __u8 reg, __u16 val16)
|
||||
static void robo_write32(__u8 page, __u8 reg, __u32 val32)
|
||||
{
|
||||
/* write data */
|
||||
mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
|
||||
mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 0xFFFF);
|
||||
mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
|
||||
|
||||
robo_reg(page, reg, REG_MII_ADDR_WRITE);
|
||||
}
|
||||
|
||||
/* checks that attached switch is 5325E/5350 */
|
||||
static int robo_vlan5350(void)
|
||||
/* checks that attached switch is 5325/5352/5354/5356/5357/53115 */
|
||||
static int robo_vlan5350(__u32 phyid)
|
||||
{
|
||||
/* set vlan access id to 15 and read it back */
|
||||
__u16 val16 = 15;
|
||||
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
|
||||
|
||||
/* 5365 will refuse this as it does not have this reg */
|
||||
return (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16);
|
||||
if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) != val16)
|
||||
return 0;
|
||||
/* gigabit ? */
|
||||
if (mdio_read(0, ROBO_MII_STAT) & 0x0100)
|
||||
robo.gmii = ((mdio_read(0, 0x0f) & 0xf000) != 0);
|
||||
/* 53115 ? */
|
||||
if (robo.gmii && robo_read32(ROBO_STAT_PAGE, ROBO_LSA_IM_PORT) != 0) {
|
||||
robo_write16(ROBO_ARLIO_PAGE, ROBO_VTBL_INDX_5395, val16);
|
||||
robo_write16(ROBO_ARLIO_PAGE, ROBO_VTBL_ACCESS_5395,
|
||||
(1 << 7) /* start */ | 1 /* read */);
|
||||
if (robo_read16(ROBO_ARLIO_PAGE, ROBO_VTBL_ACCESS_5395) == 1 &&
|
||||
robo_read16(ROBO_ARLIO_PAGE, ROBO_VTBL_INDX_5395) == val16)
|
||||
return 4;
|
||||
}
|
||||
/* dirty trick for 5356/5357 */
|
||||
if ((phyid & 0xfff0ffff ) == 0x5da00362 ||
|
||||
(phyid & 0xfff0ffff ) == 0x5e000362)
|
||||
return 3;
|
||||
/* 5325/5352/5354*/
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int robo_switch_enable(void)
|
||||
@ -259,6 +279,7 @@ static int robo_probe(char *devname)
|
||||
__u32 phyid;
|
||||
unsigned int i;
|
||||
int err = 1;
|
||||
struct mii_ioctl_data *mii;
|
||||
|
||||
printk(KERN_INFO PFX "Probing device '%s'\n", devname);
|
||||
strcpy(robo.ifr.ifr_name, devname);
|
||||
@ -285,7 +306,7 @@ static int robo_probe(char *devname)
|
||||
}
|
||||
|
||||
/* got phy address check for robo address */
|
||||
struct mii_ioctl_data *mii = if_mii(&robo.ifr);
|
||||
mii = if_mii(&robo.ifr);
|
||||
if ((mii->phy_id != ROBO_PHY_ADDR) &&
|
||||
(mii->phy_id != ROBO_PHY_ADDR_BCM63XX) &&
|
||||
(mii->phy_id != ROBO_PHY_ADDR_TG3)) {
|
||||
@ -310,7 +331,7 @@ static int robo_probe(char *devname)
|
||||
}
|
||||
if (!robo.devid)
|
||||
robo.devid = ROBO_DEVICE_ID_5325; /* Fake it */
|
||||
robo.is_5350 = robo_vlan5350();
|
||||
robo.is_5350 = robo_vlan5350(phyid);
|
||||
|
||||
robo_switch_reset();
|
||||
err = robo_switch_enable();
|
||||
@ -445,6 +466,80 @@ static int handle_enable_write(void *driver, char *buf, int nr)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int handle_port_enable_read(void *driver, char *buf, int nr)
|
||||
{
|
||||
return sprintf(buf, "%d\n", ((robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & 3) == 3 ? 0 : 1));
|
||||
}
|
||||
|
||||
static int handle_port_enable_write(void *driver, char *buf, int nr)
|
||||
{
|
||||
u16 val16;
|
||||
|
||||
if (buf[0] == '0')
|
||||
val16 = 3; /* disabled */
|
||||
else if (buf[0] == '1')
|
||||
val16 = 0; /* enabled */
|
||||
else
|
||||
return -EINVAL;
|
||||
|
||||
robo_write16(ROBO_CTRL_PAGE, robo.port[nr],
|
||||
(robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & ~3) | val16);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int handle_port_media_read(void *driver, char *buf, int nr)
|
||||
{
|
||||
u16 bmcr = mdio_read(robo.port[nr], MII_BMCR);
|
||||
int media, len;
|
||||
|
||||
if (bmcr & BMCR_ANENABLE)
|
||||
media = SWITCH_MEDIA_AUTO;
|
||||
else {
|
||||
if (bmcr & BMCR_SPEED1000)
|
||||
media = SWITCH_MEDIA_1000;
|
||||
else if (bmcr & BMCR_SPEED100)
|
||||
media = SWITCH_MEDIA_100;
|
||||
else
|
||||
media = 0;
|
||||
|
||||
if (bmcr & BMCR_FULLDPLX)
|
||||
media |= SWITCH_MEDIA_FD;
|
||||
}
|
||||
|
||||
len = switch_print_media(buf, media);
|
||||
return len + sprintf(buf + len, "\n");
|
||||
}
|
||||
|
||||
static int handle_port_media_write(void *driver, char *buf, int nr)
|
||||
{
|
||||
int media = switch_parse_media(buf);
|
||||
u16 bmcr, bmcr_mask;
|
||||
|
||||
if (media & SWITCH_MEDIA_AUTO)
|
||||
bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
|
||||
else {
|
||||
if (media & SWITCH_MEDIA_1000) {
|
||||
if (!robo.gmii)
|
||||
return -EINVAL;
|
||||
bmcr = BMCR_SPEED1000;
|
||||
}
|
||||
else if (media & SWITCH_MEDIA_100)
|
||||
bmcr = BMCR_SPEED100;
|
||||
else
|
||||
bmcr = 0;
|
||||
|
||||
if (media & SWITCH_MEDIA_FD)
|
||||
bmcr |= BMCR_FULLDPLX;
|
||||
}
|
||||
|
||||
bmcr_mask = ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_ANRESTART);
|
||||
mdio_write(robo.port[nr], MII_BMCR,
|
||||
(mdio_read(robo.port[nr], MII_BMCR) & bmcr_mask) | bmcr);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int handle_enable_vlan_read(void *driver, char *buf, int nr)
|
||||
{
|
||||
return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
|
||||
@ -539,6 +634,17 @@ static int __init robo_init(void)
|
||||
.write = handle_reset
|
||||
}, { NULL, },
|
||||
};
|
||||
static const switch_config port[] = {
|
||||
{
|
||||
.name = "enable",
|
||||
.read = handle_port_enable_read,
|
||||
.write = handle_port_enable_write
|
||||
}, {
|
||||
.name = "media",
|
||||
.read = handle_port_media_read,
|
||||
.write = handle_port_media_write
|
||||
}, { NULL, },
|
||||
};
|
||||
static const switch_config vlan[] = {
|
||||
{
|
||||
.name = "ports",
|
||||
@ -554,7 +660,7 @@ static int __init robo_init(void)
|
||||
.ports = 6,
|
||||
.vlans = 16,
|
||||
.driver_handlers = cfg,
|
||||
.port_handlers = NULL,
|
||||
.port_handlers = port,
|
||||
.vlan_handlers = vlan,
|
||||
};
|
||||
if (robo.devid != ROBO_DEVICE_ID_5325) {
|
||||
|
||||
Loading…
Reference in New Issue
Block a user