Commit Graph

4007 Commits

Author SHA1 Message Date
Martin Schiller
512bb17f3e umbim: add support for non-dhcp mode
There are mbim compatible wwan modules available which do not support
the dhcp autoconfiguration. (e.g. gemalto Cinterion ELS81)

This adds the possibility to get the configuration parameters from mbim.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Nick Hainke
304423a4ff
hostapd: update to 2023-03-29
Add patches:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch

Remove upstreamed:
- 170-DPP-fix-memleak-of-intro.peer_key.patch
- 461-driver_nl80211-use-new-parameters-during-ibss-join.patch
- 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch
- 992-openssl-include-rsa.patch

Automatically refreshed:
- 011-mesh-use-deterministic-channel-on-channel-switch.patch
- 021-fix-sta-add-after-previous-connection.patch
- 022-hostapd-fix-use-of-uninitialized-stack-variables.patch
- 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 050-build_fix.patch
- 110-mbedtls-TLS-crypto-option-initial-port.patch
- 120-mbedtls-fips186_2_prf.patch
- 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
- 150-add-NULL-checks-encountered-during-tests-hwsim.patch
- 160-dpp_pkex-EC-point-mul-w-value-prime.patch
- 200-multicall.patch
- 300-noscan.patch
- 310-rescan_immediately.patch
- 330-nl80211_fix_set_freq.patch
- 341-mesh-ctrl-iface-channel-switch.patch
- 360-ctrl_iface_reload.patch
- 381-hostapd_cli_UNKNOWN-COMMAND.patch
- 390-wpa_ie_cap_workaround.patch
- 410-limit_debug_messages.patch
- 420-indicate-features.patch
- 430-hostapd_cli_ifdef.patch
- 450-scan_wait.patch
- 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch
- 463-add-mcast_rate-to-11s.patch
- 465-hostapd-config-support-random-BSS-color.patch
- 500-lto-jobserver-support.patch
- 590-rrm-wnm-statistics.patch
- 710-vlan_no_bridge.patch
- 720-iface_max_num_sta.patch
- 730-ft_iface.patch
- 750-qos_map_set_without_interworking.patch
- 751-qos_map_ignore_when_unsupported.patch
- 760-dynamic_own_ip.patch
- 761-shared_das_port.patch
- 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch

Manually refresh:
- 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
- 301-mesh-noscan.patch
- 340-reload_freq_change.patch
- 350-nl80211_del_beacon_bss.patch
- 370-ap_sta_support.patch
- 380-disable_ctrl_iface_mib.patch
- 464-fix-mesh-obss-check.patch
- 470-survey_data_fallback.patch
- 600-ubus_support.patch
- 700-wifi-reload.patch
- 711-wds_bridge_force.patch
- 740-snoop_iface.patch

Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx),
           EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK]
Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic]
Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-04-22 23:18:15 +02:00
Felix Fietkau
10eb3fa35a netifd: update to the latest version
7de5440a520f device: fix segfault when recreating devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17 13:14:43 +02:00
Nick Hainke
36c30bee5e tcpdump: update to 4.99.4
Fixes CVE-2023-1801.

Changelog can be found here:
https://git.tcpdump.org/tcpdump/blob/55bc126b0216cfe409b8d6bd378f65679d136ddf:/CHANGES

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-04-17 15:32:48 +08:00
Christian Marangi
75f7e2d10b
odhcpd: bump to latest git HEAD
40ab806 config: use dedicated link local function to check interface
a84bff2 netlink: add support for getting interface linklocal
2ea065f Revert "config: recheck have_link_local on interface reload if already init"
4b38e6b config: fix feature for enabling service only when interface RUNNING

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-04-04 06:43:23 +02:00
Lech Perczak
90603d443f uqmi: explicitly disconnect IPv6 address family
Some modems (namely, Telit LE910C4) require the IPv6 connection state to
be cleared explicitly, to avoid reporting "no effect" if IPv6
connection is already connected through autoconnect mechanism, or during
LTE default bearer attach, which would lead to established session, but
without a way to inform protocol handler of the status.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-02 18:54:39 +02:00
Lech Perczak
8c445d56f1 uqmi: set IPv6 family explicitly in status check
Some modems require CID to be set explicitly during IPv6 connection
status check, others require IPv6 address family to be checked explicitly
after establishing connection, in order to provide correct status.
Set both fields in the request to satisfy them.

Fixes: c8a88118af ("uqmi: set CID during 'query-data-status' operation")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-02 18:54:39 +02:00
Andrey Erokhin
506bb436c6 netifd: strip mask from IP address in DHCP client params
ipaddr option can be in CIDR notation,
but udhcp wants just an IP address

Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com>
2023-04-01 22:40:35 +02:00
Ian Dall
ed86454578 dnsmasq: configure dynamic dhcp6 and dhcp4 independently
Given ipv6 has SLAAC it is quite plausible to wish to use dynamic
dhcp4 but static dhcp6. This patch keeps dynamicdhcp as the default
option for both, but is overridden by dynamicdhcpv6 or dynamicdhcpv4

Signed-off-by: Ian Dall <ian@beware.dropbear.id.au>
2023-04-01 22:35:13 +02:00
Ruben Jenster
936df715de dnsmasq: add dhcphostsfile to ujail sandbox
The dhcphostsfile must be mounted into the (ujail) sandbox.
The file can not be accessed without this mount.

Signed-off-by: Ruben Jenster <rjenster@gmail.com>
2023-04-01 22:22:49 +02:00
Szabolcs Hubai
dbd6ebd6d8 comgt: ncm: support Mikrotik R11e-LTE6 modem
The Mikrotik R11e-LTE6 modem is similar to ZTE MF286R modem, added
earlier: it has a Marvel chip, able to work in ACM+RNDIS mode, knows ZTE
specific commands, runs OpenWrt Barrier Breaker fork.
While the modem is able to offer IPv6 address, the RNDIS setup is unable
to complete if there is an IPv6 adress.

While it works in ACM+RNDIS mode, the user experience isn't as good as
with "proto 3g": the modem happily serves a local IP (192.168.1.xxx)
without internet access. Of course, if the modem has enough time
(for example at the second dialup), it will serve a public IP.

Modifing the DHCP Lease (to a short interval before connect and back to
default while finalizing) is a workaround to get a public IP at the
first try.

A safe workaround for this is to excercise an offline script of the
pingcheck program: simply restart (ifdown - ifup) the connection.

Another pitfall is that the modem writes a few messages at startup,
which confuses the manufacturer detection algorithm and got disabled.

    daemon.notice netifd: Interface 'mikrotik' is setting up now
    daemon.notice netifd: mikrotik (2366): Failed to parse message data
    daemon.notice netifd: mikrotik (2366): WARNING: Variable 'ok' does not exist or is not an array/object
    daemon.notice netifd: mikrotik (2366): Unsupported modem
    daemon.notice netifd: mikrotik (2426): Stopping network mikrotik
    daemon.notice netifd: mikrotik (2426): Failed to parse message data
    daemon.notice netifd: mikrotik (2426): WARNING: Variable '*simdetec:1,sim' does not exist or is not an array/object
    daemon.notice netifd: mikrotik (2426): Unsupported modem
    daemon.notice netifd: Interface 'mikrotik' is now down

A workaround for this is to use the "delay" option in the interface
configuration.

I want to thank Forum members dchard (in topic Adding support for
MikroTik hAP ac3 LTE6 kit (D53GR_5HacD2HnD)) [1]
and mrhaav (in topic OpenWrt X86_64 + Mikrotik R11e-LTE6) [2]
for sharing their experiments and works.
Another information page was found at eko.one.pl [3].

[1]: https://forum.openwrt.org/t/137555
[2]: https://forum.openwrt.org/t/151743
[3]: https://eko.one.pl/?p=modem-r11elte

Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
2023-03-29 17:29:02 +02:00
Szabolcs Hubai
91eca7b04f comgt: add quirk for Mikrotik modems based on Mikrotik R11e-LTE6
The MikroTik R11e-LTE6 modem goes into flight mode (CFUN=4) at startup
and the radio is off (*RADIOPOWER: 0):

    AT+RESET
    OK

    OK

    *SIMDETEC:2,NOS

    *SIMDETEC:1,SIM

    *ICCID: 8936500119010596302

    *EUICC: 1

    +MSTK: 11, D025....74F3

    *ADMINDATA: 0, 2, 0

    +CPIN: READY

    *EUICC: 1

    *ECCLIST: 5, 0, 112, 0, 000, 0, 08, 0, 118, 0, 911

    +CREG: 0

    $CREG: 0

    +CESQ: 99,99,255,255,255,255

    *CESQ: 99,99,255,255,255,255,0

    +CGREG: 0

    +CEREG: 0

    +CESQ: 99,99,255,255,255,255

    *CESQ: 99,99,255,255,255,255,0

    *RADIOPOWER: 0

    +MMSG: 0, 0

    +MMSG: 0, 0

    +MMSG: 1, 0

    +MPBK: 1

While the chat script is able to establish the PPP connection,
it's closed instantly by the modem: LCP terminated by peer.

    local2.info chat[7000]: send (ATD*99***1#^M)
    local2.info chat[7000]: expect (CONNECT)
    local2.info chat[7000]: ^M
    local2.info chat[7000]: ATD*99***1#^M^M
    local2.info chat[7000]: CONNECT
    local2.info chat[7000]:  -- got it
    local2.info chat[7000]: send ( ^M)
    daemon.info pppd[6997]: Serial connection established.
    kern.info kernel: [  453.659146] 3g-mikrotik: renamed from ppp0
    daemon.info pppd[6997]: Renamed interface ppp0 to 3g-mikrotik
    daemon.info pppd[6997]: Using interface 3g-mikrotik
    daemon.notice pppd[6997]: Connect: 3g-mikrotik <--> /dev/ttyACM0
    daemon.info pppd[6997]: LCP terminated by peer
    daemon.notice pppd[6997]: Connection terminated.
    daemon.notice pppd[6997]: Modem hangup
    daemon.info pppd[6997]: Exit.
    daemon.notice netifd: Interface 'mikrotik' is now down

Sending "AT+CFUN=1" to modem deactivates the flight mode and
solves the issue:

    daemon.notice netifd: Interface 'mikrotik' is setting up now
    daemon.notice netifd: mikrotik (7051): sending -> AT+CFUN=1
    daemon.notice pppd[7137]: pppd 2.4.9 started by root, uid 0
    local2.info chat[7140]: abort on (BUSY)
    local2.info chat[7140]: abort on (NO CARRIER)
    local2.info chat[7140]: abort on (ERROR)
    local2.info chat[7140]: report (CONNECT)
    local2.info chat[7140]: timeout set to 10 seconds
    local2.info chat[7140]: send (AT&F^M)
    local2.info chat[7140]: expect (OK)
    local2.info chat[7140]: ^M
    local2.info chat[7140]: +CESQ: 99,99,255,255,255,255^M
    local2.info chat[7140]: ^M
    local2.info chat[7140]: *CESQ: 99,99,255,255,255,255,0^M
    local2.info chat[7140]: AT&F^MAT&F^M^M
    local2.info chat[7140]: OK
    local2.info chat[7140]:  -- got it
    ...
    local2.info chat[7140]: send (ATD*99***1#^M)
    local2.info chat[7140]: expect (CONNECT)
    local2.info chat[7140]: ^M
    local2.info chat[7140]: ATD*99***1#^M^M
    local2.info chat[7140]: CONNECT
    local2.info chat[7140]:  -- got it
    local2.info chat[7140]: send ( ^M)
    daemon.info pppd[7137]: Serial connection established.
    kern.info kernel: [  463.094254] 3g-mikrotik: renamed from ppp0
    daemon.info pppd[7137]: Renamed interface ppp0 to 3g-mikrotik
    daemon.info pppd[7137]: Using interface 3g-mikrotik
    daemon.notice pppd[7137]: Connect: 3g-mikrotik <--> /dev/ttyACM0
    daemon.warn pppd[7137]: Could not determine remote IP address: defaulting to 10.64.64.64
    daemon.notice pppd[7137]: local  IP address 100.112.63.62
    daemon.notice pppd[7137]: remote IP address 10.64.64.64
    daemon.notice pppd[7137]: primary   DNS address 185.29.83.64
    daemon.notice pppd[7137]: secondary DNS address 185.62.131.64
    daemon.notice netifd: Network device '3g-mikrotik' link is up
    daemon.notice netifd: Interface 'mikrotik' is now up

To send this AT command to the modem the "runcommand.gcom" script
dependency is moved from comgt-ncm to comgt.
As the comgt-ncm package depends on comgt already, this change
is a NOOP from that point of view.
But from the modem's point it is a low hanging fruit as the modem
is usable with installing comgt and kmod-usb-ncm packages.

Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
2023-03-29 17:29:02 +02:00
Mike Wilson
8f27093ce7 ncm: add error check and retry mechanism for gcom call
This patch solves the problem of receiving "error" responses when
initially calling gcom. This avoids unnecessary NO_DEVICE failures.

A retry loop retries the call after an "error" response within the
specified delay. A successful response will continue with the connection
immediately without waiting for max specified delay, bringing the
interface up sooner.

Signed-off-by: Mike Wilson <mikewse@hotmail.com>
2023-03-28 14:19:33 +02:00
Felix Fietkau
66f0878633 firewall4: update to the latest version
39e8c70957c7 fw4: fix handling the ipset "comment" option
e6e82a55206c fw4: add further symbolic ICMP type declarations
ce9a37829a76 tests: add testcase for automatic includes
30ee17a9c65d fw4: fix syntax errors in ICMP type declarations
1ecfadd52291 fw4: remove accidentally committed .orig and .rej file
04a06bd70b98 fw4: enable flowtable counters

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-24 10:15:23 +01:00
Christian Marangi
eeaa71a3de
odhcpd: bump to latest git HEAD
29c934d config: recheck have_link_local on interface reload if already init

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-03-24 02:01:07 +01:00
Christian Marangi
d2fc620d0a
odhcpd: bump to latest git HEAD
7c0f603 router: skip RA and wait for LINK-LOCAL to be assigned
ba30afc config: skip interface setup if interface not IFF_RUNNING
06b111e Revert "odhcpd: Reduce error messages"
90d6cc9 odhcpd: Reduce error messages

Also drop AUTORELEASE since it got deprecated.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-03-22 06:39:51 +01:00
Andre Heider
07730ff346
treewide: add support for "lto" in PKG_BUILD_FLAGS
This reduces open coding and allows to easily add a knob to enable
it treewide, where chosen packages can still opt-out via "no-lto".

Some packages used LTO, but not the linker plugin. This unifies 'em
all to attempt to produce better code.
Quoting man gcc(1):
"This improves the quality of optimization by exposing more code to the
link-time optimizer."

Also use -flto=auto instead of -flto=jobserver, as it's not guaranteed
that every buildsystem uses +$(MAKE) correctly.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-03-21 18:28:22 +01:00
Andre Heider
da3700988d
treewide: add support for "gc-sections" in PKG_BUILD_FLAGS
This reduces open coding and allows to easily add a knob to
enable it treewide, where chosen packages can still opt-out via
"no-gc-sections".

Note: libnl, mbedtls and opkg only used the CFLAGS part without the
LDFLAGS counterpart. That doesn't help at all if the goal is to produce
smaller binaries. I consider that an accident, and this fixes it.

Note: there are also packages using only the LDFLAGS part. I didn't
touch those, as gc might have been disabled via CFLAGS intentionally.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-03-21 18:28:22 +01:00
Andre Heider
5c545bdb36
treewide: replace PKG_USE_MIPS16:=0 with PKG_BUILD_FLAGS:=no-mips16
Keep backwards compatibility via PKG_USE_MIPS16 for now, as this is
used in all package feeds.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-03-21 18:28:22 +01:00
Nick Hainke
ab514c28a8 nftables: update to 1.0.7
Release Notes:
https://marc.info/?l=netfilter-devel&m=167873533214563&w=2

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-03-19 17:00:45 +01:00
Mark Mentovai
8dea8bde2a
odhcp6c: add "verbose" option
odhcp6c logs messages related to its activity when invoked with -v, but
there is no way to configure this from within OpenWrt. This adds a UCI
option to turn on odhcp6c logging, disabled by default. To enable, set,
for example, network.wan6.verbose = 1.

Signed-off-by: Mark Mentovai <mark@mentovai.com>
2023-03-14 22:47:34 +01:00
Felix Fietkau
9d8374cadc qosify: update to the latest version
ca4509cf84d2 bpf: switch to using bpf_skb_utils.h
d064439009d0 qosify-bpf: skip unnecessary flow lookups
9c625ae96f2d map: fix deleting port based rules
9a47ea4b683d map: fix return code check for bpf_map_get_next_key calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 21:53:37 +01:00
Felix Fietkau
635d177ac9 hostapd: enable radius server support
This is useful in combination with the built-in eap server support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 10:24:05 +01:00
Felix Fietkau
cf992ca862 hostapd: add missing return code for the bss_mgmt_enable ubus method
Fixes bogus errors on ubus calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 10:24:05 +01:00
Felix Fietkau
d10e1b4a71 hostapd: add support for defining multiple acct/auth servers
This allows adding backup servers, in case the primary ones fail.
Assume that port and shared secret are going to be the same.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 10:24:05 +01:00
Hauke Mehrtens
a03076cc39 binutils: Update to version 2.40
binutils 2.39: https://lists.gnu.org/archive/html/info-gnu/2022-08/msg00002.html
binutils 2.40: https://lists.gnu.org/archive/html/info-gnu/2023-01/msg00003.html

This version includes a new libsframe.so library, pack it into the
libbfd package as it is used by this library. Also deactivate some
optional configuration options for now.

An extra patch to fix compile problem in AARCH64 is added.
gprofng needs a C++ standard library, deactivate it for now.

Activate feature-disassembler-init-styled in bpftools too to fix
compilation with the updated binutils.

An bpftool version 7.0 or later is needed for binutils 2.39 and later.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-03-05 19:23:42 +01:00
Hauke Mehrtens
26a65e852c bpftool: Update to version 7.1.0
bpftool changelog: https://github.com/libbpf/bpftool/releases
libbpf changelog: https://github.com/libbpf/libbpf/releases

This updates the bfptool to version 7.1.0. This also includes an update
of the libbpf to version 1.1.

This also adds some new feature options and removes some old ones which
were also removed form the source code. zlib for example is now
mandatory.

Add -flto also to LD flags to make it really work.

Before this change bpftool was on a git commit between version 6.7 and
6.8 and libbpf was on a commit between version 0.7 and 0.8.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-03-05 19:23:42 +01:00
Kevin Darbyshire-Bryant
c9df2d5c64 dnsmasq: bump to v2.89
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2023-02-25 20:49:47 +00:00
Hauke Mehrtens
2a104365dc netifd: update to the latest version
ed65a00 netifd: bridge: Fix format string position
19372d8 netifd: Fix multiple -Wsign-compare warnings
8ebf033 netifd: Do not return values in void function
c77417a netifd: Explicitly zero initialize variables
463a120 netifd: Activate -Wextra compile warnings

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-02-25 19:57:47 +01:00
Nick Hainke
638ebd3067 iproute2: update to 6.2
Release Notes:
https://lwn.net/Articles/923952/

Refresh patches:
- 110-darwin_fixes.patch
- 115-add-config-xtlibdir.patch
- 140-allow_pfifo_fast.patch
- 140-keep_libmnl_optional.patch
- 145-keep_libelf_optional.patch
- 150-keep_libcap_optional.patch
- 155-keep_tirpc_optional.patch
- 170-ip_tiny.patch
- 175-reduce-dynamic-syms.patch
- 180-drop_FAILED_POLICY.patch
- 190-fix-nls-rpath-link.patch
- 195-build_variant_ip_tc.patch
- 200-drop_libbsd_dependency.patch
- 300-selinux-configurable.patch

Remove upstreamed:
- 320-configure-Remove-include-sys-stat.h.patch

While working on it remove AUTORELEASE.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-02-25 13:32:35 +01:00
Nick Hainke
c98a202446 ethtool: update to 6.2
Release notes:
- Feature: link down event statistics (no option)
- Feature: JSON output for coalesce (-c)
- Feature: new link modes (no option)
- Feature: JSON output for ring (-g)
- Feature: netlink handler for RSS get (-x)
- Fix: fix boolean value output in JSON output
- Fix: fix build errors and warnings

Remove upstreamed patches:
- 100-uapi-Bring-in-if-h.patch
- 101-netlink-Fix-maybe-uninitialized-meters-variable.patch
- 102-raw-marvell-c-Fix-build-with-musl-libc.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-02-25 13:29:07 +01:00
Leon M. Busch-George
ae751535de
hostapd: always use sae_password for mesh/SAE auth
This patch fixes a corner case when using passwords that are exactly 64
characters in length with mesh mode or passwords longer than 63 characters
with SAE because 'psk' is used instead of 'sae_password'.
SAE is obligatory for 802.11s (mesh point).

The 'psk' option for hostapd is suited for WPA2 and enforces length
restrictions on passwords. Values of 64 characters are treated as PMKs.
With SAE, PMKs are always generated during the handshake and there are no
length restrictions.
The 'sae_password' option is more suited for SAE and should be used
instead.

Before this patch, the 'sae_password' option is only used with mesh mode
passwords that are not 64 characters long.
As a consequence:
- mesh passwords can't be 64 characters in length
- SAE only works with passwords with lengths >8 and <=63 (due to psk
  limitation).

Fix this by always using 'sae_password' with SAE/mesh and applying the PMK
differentiation only when PSK is used.

Fixes: #11324
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
[ improve commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-02-19 19:43:57 +01:00
Leon M. Busch-George
3c10c42ddd
hostapd: add quotes in assignments
It's generally advised to use quotes for variable assignments in bash.

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
2023-02-19 19:43:54 +01:00
Andre Heider
78dc8e2b13 wireguard-tools: remove unnecessary .mk includes
Including kernel.mk moves the package build folder in the linux one, which
is confusing since this isn't building any kernel modules.

package-defaults.mk is already included my package.mk.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-02-18 19:59:12 +01:00
Stijn Tintel
65c9b5ffb0 odhcpd: bump to git HEAD
dfab0fa dhcpv4: detect noarp interfaces
  5a17751 router: improve RA logging
  edc5e17 router: always check ra_default

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2023-02-17 16:30:03 +02:00
Rafał Miłecki
3c66ac7e22 iptables: iptables-mod-conntrack-extra: don't select kmod-ipt-raw
Package kmod-ipt-raw enables CONFIG_IP_NF_RAW and packages
iptable_raw.ko

According to kernel's net/netfilter/Kconfig there are only 3 kernel
symbols that depend on the IP_NF_RAW:
1. NETFILTER_XT_TARGET_CT (xt_CT.ko)
2. NETFILTER_XT_TARGET_NOTRACK (unused symbol?!)
3. NETFILTER_XT_TARGET_TRACE (xt_TRACE.ko)

Now: iptables-mod-conntrack-extra selects kmod-ipt-conntrack-extra which
provides: xt_helper.ko nf_conncount.ko xt_connlimit.ko xt_connmark.ko
xt_recent.ko and xt_connbytes.ko (none of them seems to require
iptable_raw.ko).

It seems there is no explicit reason for iptables-mod-conntrack-extra to
require kmod-ipt-raw (iptables_raw.ko).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-02-15 14:28:08 +01:00
Rafał Miłecki
601257e388 netifd: refactor packet steering init
1. Move setup code to independent script file
2. Add init.d script to allow automatic updates
3. Support platform specific /usr/libexec/platform/packet-steering.sh

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-02-15 14:25:38 +01:00
Leon M. George
e4bd3de1be
dnsmasq: refuse to add empty DHCP range
Use ipcalc's return value to react to invalid range specifications.
By simply ignoring the range instead of aborting with an error code,
dnsmasq should still start when there's an error (best effort).
Aborting the config generation or working with invalid range specs leaves
dnsmasq crash-looping which is the right thing to do concerning that
particular interface but it also hinders DHCP service on other interfaces
and DNS on the router itself.

Signed-off-by: Leon M. George <leon@georgemail.eu>
2023-02-07 21:05:57 +01:00
Christian Marangi
f28a604df4
iwinfo: bump to latest git HEAD
c7eb8eb nl80211: restore iterating over all devices in nl80211_phy2ifname()

Fixes: #11902
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-02-06 21:36:51 +01:00
Jan Hoffmann
b91d7d9d78 ltq-*-app: extend ubus metrics/statistics
Expose a few additional useful values via ubus:

- Channel error counters (CRC, FEC)
- Retransmission counters (MINEFTR, LEFTRS)
- Impulse noise protection level
- Rate adaptation mode
- OLR statistics (Bitswap, SRA, SOS)
- Pilot tones
- Upstream/downstream band information

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-02-03 13:40:47 +01:00
Felix Fietkau
83d3e255f1 bridger: update to the latest version
8be8bb9df789 nl: fix accessing hairpin mode and isolated from the right attribute set

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-01-29 10:08:21 +01:00
Andre Heider
9902c8520b uhttpd: clean up Makefile
uhttpd's cmake options all default to ON. Either we set all of them or
none if the defaults need to be changed. Let's go with the latter.

Because support for all modules is always compiled in, remove two unused
and useless config toggles.

uhttpd detects and uses libcrypt itself, no need to add it here again.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-01-28 22:37:35 +01:00
Nick Hainke
364a9be338 ethtool: update to 6.1
Release notes:
https://lore.kernel.org/netdev/20221219225600.r54vejiqapn266cm@lion.mk-sys.cz/T/

Add patches fixing compilation:
- 100-uapi-Bring-in-if-h.patch
- 101-netlink-Fix-maybe-uninitialized-meters-variable.patch
- 102-raw-marvell-c-Fix-build-with-musl-libc.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-28 20:26:22 +01:00
Hauke Mehrtens
015c108755 relayd: bump to version 2023-01-28
f646ba4 route: Fix compile warning with glibc

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-28 20:24:22 +01:00
Hauke Mehrtens
d14559e9df uhttpd: update to latest Git HEAD
47561aa mimetypes: add audio/video support for apple airplay
6341357 ucode: respect all arguments passed to send()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-28 19:31:42 +01:00
Nick Hainke
d68a73a025 tcpdump: update to 4.99.3
Changes:
https://git.tcpdump.org/tcpdump/blob/032e4923e5202ea4d5a6d1cead83ed1927135874:/CHANGES

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-26 00:17:59 +01:00
Christian Marangi
b61404a6ad
rssileds: bump PKG_RELEASE due to libiwinfo ABI change
Bump PKG_RELEASE due to libiwinfo ABI change to trigger a package
rebuild.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-23 13:55:42 +01:00
Christian Marangi
57586ddd71
iwinfo: update to latest Git HEAD
1e4e709 iwinfo: readd missing define for IWINFO_AUTH in header

Fixes: #11860
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-23 13:54:13 +01:00
Hannu Nyman
a57796b137
dnsmasq: set an increased cachesize default value
Dnsmasq DNS cache size is only 150 by default.
Set the uci default value to 1000, so that cache gets used more
and unnecessary DNS queries to upstream can be avoided.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2023-01-21 11:13:44 +01:00
Christian Marangi
f3d8de7398
iwinfo: update to latest Git HEAD
Bump ABI to 20230121 due to struct changes

f766138 cli: print the flags on the frequency list
8ee7971 lib: add IWINFO_FREQ_FLAG_NAMES
81184d2 nl80211: fix some comments
2c4ee84 nl80211: prefer non-supplicant-based devices
6194aaf nl80211: simplify iterating over phy's devices
acbf4fe nl80211: remove redundant check in nl80211_phy2ifname()
0172c97 cli: print the frequency and band on the scan list
bbe424f cli: print the band on the frequency list
afa147c nl80211: add "mhz" and "band" to iwinfo_scanlist_entry
0d5ea34 nl80211: add "band" to iwinfo_freqlist_entry
dba0f06 nl80211: add support for radiation and indoor chan restriction
7e3d7de iwinfo: reorganize iwinfo header to enum and defines
9b47b03 devices: add USB devices supported by the mt76 driver
c0fda7c utils: skip comment lines when parsing devices.txt
dbc0ee7 cli: describe USB devices as such
891acee devices: add MediaTek MT7628 card
fac0787 devices: add support for declaring compatible matched devices

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-21 01:23:22 +01:00
Nick Hainke
a04bbbbea4 ipset: update to 7.17
Release notes:
https://lwn.net/Articles/918784/

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-17 23:14:46 +01:00
Martin Schiller
6e4c9738be ltq-vdsl-vr11-app: add version 4.23.1 for vr11 targets
This uses version 4.23.1 of the dsl_cpe_control package from the Intel
UGW 8.5.2.10 for the VRX518.

Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com>
[rebased]
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
[update to 4.23.1, added Jan's vector mac patch, fix warnings,
 switch to tag tarball]
Signed-off-by: Andre Heider <a.heider@gmail.com>
[add missing nLine in autoboot script, fix disconnect on termination,
 remove unneeded VR9 leftovers in init script]
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-01-16 23:41:41 +00:00
Andre Heider
6361eb47cd ltq-dsl-base: enable for ipq40xx
This is required by the DSL userland tool for hotplug support.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-01-16 23:41:41 +00:00
Christian Marangi
d9aa41dcda
lldpd: use release tar instead of codeload
There is currently a problem with making reproducible version of lldpd.
The tool version is generated based on 3 source:
1. .dist-version file in release tar
2. git hash with presence of .git directory
3. current date

Using the codeload tar from github results in getting the repo without
the .git directory and since they are not release tar, we don't have
.dist-version. This results in having lldpd bin with a version set to
the current build time.

Switch to release tar so that we correctly have a .dist-version file and
the version is not based on the build time.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2023-01-12 14:55:07 +01:00
Christian Marangi
ee397759b6
iwinfo: update to latest Git HEAD
c7b420a devices: add Qualcomm Atheros QCN6024/9024/9074 cards
5914d71 iwinfo: devices: add Qualcomm Atheros IPQ8074 WiSoC

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-10 00:54:31 +01:00
Hauke Mehrtens
dc12c76dc5 uqmi: Ignore wrong maybe-uninitialized and dangling-pointer error
GCC 12.2.0 shows this false positive error message:
````
uqmi-2022-05-04-56cb2d40/dev.c: In function 'qmi_request_wait':
uqmi-2022-05-04-56cb2d40/dev.c:217:23: error: storing the address of local variable 'complete' in '*req.complete' [-Werror=dangling-pointer=]
  217 |         req->complete = &complete;
      |         ~~~~~~~~~~~~~~^~~~~~~~~~~
uqmi-2022-05-04-56cb2d40/dev.c:208:14: note: 'complete' declared here
  208 |         bool complete = false;
      |              ^~~~~~~~
uqmi-2022-05-04-56cb2d40/dev.c:208:14: note: 'req' declared here
cc1: all warnings being treated as errors
````

and this one:
````
In file included from uqmi-2022-05-04-56cb2d40/commands.c:28:
In function 'blobmsg_close_table',
    inlined from 'cmd_nas_get_cell_location_info_cb' at /home/haukeuqmi-2022-05-04-56cb2d40/commands-nas.c:897:4:
/usr/include/libubox/blobmsg.h:256:9: error: 'c' may be used uninitialized [-Werror=maybe-uninitialized]
  256 |         blob_nest_end(buf, cookie);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from uqmi-2022-05-04-56cb2d40/commands.c:169:
uqmi-2022-05-04-56cb2d40/commands-nas.c: In function 'cmd_nas_get_cell_location_info_cb':
uqmi-2022-05-04-56cb2d40/commands-nas.c:713:15: note: 'c' was declared here
  713 |         void *c, *t, *cell, *freq;
      |               ^
cc1: all warnings being treated as errors
````

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-09 00:10:52 +01:00
Nick Hainke
5809fb4546 tcpdump: update to 4.99.2
Update to latest version. For release information look into CHANGES
file [0].

Automatically refreshed:
- 001-remove_pcap_debug.patch

Manually refreshed:
- 100-tcpdump_mini.patch

old ipkg sizes:
316554 bin/packages/mips_24kc/base/tcpdump_4.99.1-1_mips_24kc.ipk
141457 bin/packages/mips_24kc/base/tcpdump-mini_4.99.1-1_mips_24kc.ipk

new ipkg sizes:
318089 bin/packages/mips_24kc/base/tcpdump_4.99.2-1_mips_24kc.ipk
141941 bin/packages/mips_24kc/base/tcpdump-mini_4.99.2-1_mips_24kc.ipk

[0] - https://github.com/the-tcpdump-group/tcpdump/blob/master/CHANGES

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-06 16:22:28 +01:00
Nick Hainke
b331ffe807 nftables: update to 1.0.6
Remove upstreamed patches:
- 0001-fix-nft.patch

Upstream switched to "tar.xz" archives.

old ipkg size:
273678 bin/packages/mips_24kc/base/nftables-json_1.0.5-2_mips_24kc.ipk

new ipkg size:
271624 bin/packages/mips_24kc/base/nftables-json_1.0.6-1_mips_24kc.ipk

Release Information:
https://netfilter.org/projects/nftables/files/changes-nftables-1.0.6.txt

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-06 16:14:45 +01:00
Felix Fietkau
4455ed65c6 bridger: update to the latest version
def7755c459d add missing copyright headers
f68307fd96d7 add hairpin mode support
9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0
978c1f9eed07 add support for the bridge port isolated flag

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-01-03 13:28:47 +01:00
Hauke Mehrtens
ee47a28cec treewide: Trigger reinstall of all wolfssl dependencies
The ABI of the wolfssl library changed a bit between version 5.5.3 and
5.5.4. This release update will trigger a rebuild of all packages which
are using wolfssl to make sure they are adapted to the new ABI.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-01 21:06:54 +01:00
Felix Fietkau
2e61469a6c netifd: update to the latest version
2cffe0c44e62 treewide: correctly apply IFNAMSIZ limit
96bcbb2e4eb6 wireless: allow set_retry ubus notify command to trigger a wdev restart
a2e8cd75dbf6 wireless: add support for disabling multicast-to-unicast per virtual interface
e9f44189ade7 system: move netdev types to system-linux.c where they are used
a3fab0119ef1 utils: include utils.h last
7ce73fc16765 vlandev: propagate topology changes
81c1fbcba2f2 device: fix vlan device issues with disappearing lower devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-30 16:42:57 +01:00
Hauke Mehrtens
f12bad6c19 tree-wide: Do not use package librt and libpthread
The libraries libpthread, libdl, libutil, libanl have been integrated
into the libc library in version 2.34. it is not needed to explicitly
link them any more.

Most of the functions have been moved from the librt.so into libc.so
some time ago already.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-29 18:50:24 +01:00
Felix Fietkau
090ad03343 hostapd: allow sharing the incoming DAS port across multiple interfaces
Use the NAS identifier to find the right receiver context on incoming messages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-27 19:10:04 +01:00
Hauke Mehrtens
fb15cb4ce9 iproute2: Fix build with GCC 12 and glibc 2.36
This fixes the detection of name_to_handle_at() when GCC 12 and glibc
2.36 are used.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-26 15:18:08 +01:00
Hauke Mehrtens
73dca49f35 uhttpd: update to latest Git HEAD
2397755 client: fix incorrectly emitting HTTP 413 for certain content lengths

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-26 15:18:08 +01:00
Kevin Darbyshire-Bryant
5c7e4a9d2e dnsmasq: bump to v2.88
Most relevant feature for openwrt in this release, supports dynamically
removing hosts from 'hostsdir' supplied host files.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-12-25 15:07:36 +00:00
Daniel Golle
6675a9aaf4 xdp-tools: update to version 1.2.9
Changes since v1.2.8:
 32aaf32 libxdp: Fix incorrect rx_ring_setup_done
 6049671 headers: add bpf_endian.h for parsing_helpers.h
 2682c1c export-man: Ignore errors when executing git shell command
 8afda7a xdp-loader/README: Mention lack of support for HW mode in most cards
 dc69919 libxdp: fix prog_fd checks for fd >= 0
 3d7c22a libxdp: Allow falling back to single-program attachment for loaded programs
 af00429 libxdp: Fix check in xdp_program__attach_single()
 41703d2 libxdp: Make sure to set the the program autoload when loading a program
 b1fd2e5 test-xdpdump: Only run tshark attribute test on newer versions of tshark
 5dfe342 libxdp: Convert xdp-dispatcher to use strict section names
 929a22e configure: Try to auto-detect versioned clang binaries
 074fcfb libxdp: Check program name when determining if a program is a dispatcher
 e13a191 Bump TOOLS_VERSION to 1.2.9

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-12-20 13:57:34 +00:00
Rosen Penev
6d1df35747 hostapd: add mbedtls variant
This adds the current WIP mbedtls patches for hostapd. The motivation
here is to reduce size.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-12-19 12:27:35 +00:00
Nick Hainke
8ed53e0928 iproute2: update to 6.1.0
Announcement:
https://lore.kernel.org/netdev/20221214094130.7b11ec2e@hermes.local/T/#t

Refresh patch:
- 170-ip_tiny.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-12-18 16:33:16 +01:00
Felix Fietkau
581f2b15b2 hostapd: enable coredumps
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-16 14:32:47 +01:00
Felix Fietkau
c2fde432b3 hostapd: always set a default for the nas identifier
It is used for both 802.11r and WPA enterprise.
Setting it when not needed is harmless

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-16 14:32:47 +01:00
Felix Fietkau
2fb38b77a2 hostapd: add support for automatically setting RADIUS own-ip dynamically
Some servers use the NAS-IP-Address attribute as a destination address

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-16 14:32:47 +01:00
Jo-Philipp Wich
4a4d0bf78d iwinfo: update to latest Git HEAD
8d15809 cli: print current HT mode
8f86dd6 cli: use IWINFO_HTMODE_COUNT
f36b72b cli: use IWINFO_KMGMT_NAMES
91be7e0 cli: use IWINFO_CIPHER_NAMES
49b6ec9 cli: fix printing the scan channel width
b1c8873 cli: fix marking the active channel
9e14e64 utils: add iwinfo_band2ghz() and iwinfo_ghz2band() helpers
e084781 utils: add helper functions to get names by values
d09a77a utils: add iwinfo_htmode_is_{ht|vht|he} helpers
8752977 utils: add and use iwinfo_format_hwmodes()
02f433e lib: add IWINFO_80211_COUNT and IWINFO_80211_NAMES
1d30df1 lib: add IWINFO_BAND_COUNT and IWINFO_BAND_NAMES
aefd0ef lib: use common IWINFO_CIPHER_NAMES strings
a5b30de lib: add IWINFO_OPMODE_COUNT and use it for IWINFO_OPMODE_NAMES
9f29e79 lib: constify and fixup the string array definitions
fddc015 nl80211: mark frequencies where HE operation in not allowed
6d50a7c nl80211: add support for HE htmodes
4ba5713 nl80211: properly get available bands for the hwmode
91b2ada nl80211: update the kernel header nl80211.h
3f619a5 nl80211: fix frequency/channel conversion for the 6G band
a77d915 nl80211: don't guess if a name is an ifname
c27ce71 devices: add usb device MediaTek MT7921AU
14f864e nl80211: add ability to describe USB devices
a5a75fd nl80211: remove ancient wpa_supplicant ctrl socket path
dd4e1ff nl80211: fix wpa supplicant ctrl socket permissions
d638163 fix -Wdangling-else warnings
4aa6c5a fix -Wreturn-type warning
3112726 fix -Wpointer-sign warning
ebd5f84 fix -Wmaybe-uninitialized warning
5469898 fix -Wunused-variable warnings
462b679 fix -Wduplicate-decl-specifier warnings
ccaabb4 fix -Wformat-truncation warnings
50380db enable useful compiler warnings via -Wall

Fixes: https://github.com/openwrt/openwrt/issues/10158
Fixes: https://github.com/openwrt/openwrt/issues/10687
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-12-16 00:55:51 +01:00
Andre Heider
7c63295bf4 treewide: remove DRIVER_11N_SUPPORT
hostapd's compile time option CONFIG_IEEE80211N was removed almost 3 years
ago, 80.211n/HT is always included since then.

Noticed because `hostapd -v11n` confusingly returned an error.

See hostapd's commit:
f3bcd69603 "Remove CONFIG_IEEE80211N build option"

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-12-13 10:54:50 +01:00
Andre Heider
2d36f60d88 hostapd: fix 350-nl80211_del_beacon_bss.patch
Pass the expected struct:

../src/drivers/driver_nl80211.c: In function 'wpa_driver_nl80211_del_beacon':
../src/drivers/driver_nl80211.c:2945:31: warning: passing argument 1 of 'nl80211_bss_msg' from incompatible pointer type [-Wincompatible-pointer-types]
 2945 |         msg = nl80211_bss_msg(drv, 0, NL80211_CMD_DEL_BEACON);
      |                               ^~~
      |                               |
      |                               struct wpa_driver_nl80211_data *
../src/drivers/driver_nl80211.c:695:50: note: expected 'struct i802_bss *' but argument is of type 'struct wpa_driver_nl80211_data *'
  695 | struct nl_msg * nl80211_bss_msg(struct i802_bss *bss, int flags, uint8_t cmd)
      |                                 ~~~~~~~~~~~~~~~~~^~~

Fixes: 35ff1affe8 "hostapd: update to 2022-05-08"
Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-12-13 10:54:50 +01:00
Andre Heider
3bc060440a hostapd: remove an unused function from ubus.c
eee80211_frequency_to_channel() isn't used anymore, which is a leftover from:
2a31e9ca97 "hostapd: add op-class to get_status output"

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-12-13 10:54:50 +01:00
Julio Gonzalez Gil
840ce0a65b umbim: Allow roaming and partner connections
Allow registration if the SIM is roaming or partner mode, by adding two
new options to the protocol.

Until now, such registration failed because umbim returns exit codes 4 and
5 for such situations.

Signed-off-by: Julio Gonzalez Gil <git@juliogonzalez.es>
2022-12-11 03:24:45 +01:00
Felix Fietkau
8d90b9fef1 mac80211: update to linux 6.1-rc8
This should help stay in sync with upstream development

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-10 15:15:19 +01:00
Felix Fietkau
a797f0e82a hostapd: use wpa_supplicant for unencrypted mesh connections
It's more reliable than using iw

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-10 12:38:46 +01:00
Jan-Niklas Burfeind
13f82ce264 comgt-ncm: add support for quectel modem EC200T-EU
context_type is an integer mapping of pdptype:
1: IPV4
2: IPV6
3: IPV4V6

Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
2022-12-07 12:30:39 +01:00
Jo-Philipp Wich
f1f3d19387 firewall4: add missing PKG_MIRROR_HASH
Fixes: 84183f0d98 ("firewall4: update to latest Git HEAD")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-12-07 08:54:56 +01:00
Jo-Philipp Wich
84183f0d98 firewall4: update to latest Git HEAD
700a925 fw4: prevent null access when no ipsets are defined
6443ec7 config: drop input traffic by default
119ee1a ruleset: drop ctstate invalid traffic for masq-enabled zones

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-12-06 11:43:06 +01:00
Daniel Golle
aa12a0fdd1
dnsmasq: add option to expose additional paths to jail
Add new UCI list 'addn_mount' allowing the expose additional filesystem
paths to the jailed dnsmasq process. This is useful e.g. in case of
manually configured includes to the configuration file or symlinks
pointing outside of the exposed paths as used by e.g. the safe-search
package in the packages feed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-11-27 14:06:08 +00:00
Nick Hainke
68714f2135 ipset: update to 7.16
Release Notes:
https://lore.kernel.org/netfilter-devel/d65fe5d8-d5ea-ef7-102d-aa1d15bb4d69@netfilter.org/T/#u

Patch "0001-lib-ipset-fix-printf-warning.patch" replaced upstream by:
http://git.netfilter.org/ipset/commit/?id=e39e3466d2d38cdfe83447f391b550e607bc3ce8

Remove upstreamed:
- 0002-Fix-IPv6-sets-nftables-translation.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-27 12:58:33 +01:00
Nick Hainke
c17b6343f3 lldpd: update to 1.0.16
Release Notes:
https://github.com/lldpd/lldpd/releases/tag/1.0.16

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-18 20:27:52 +01:00
Chen Minqiang
4979d16fb1 dnsmasq: add support for filter-AAAA/A
This add --filter-A and --filter-AAAA options, to remove IPv4 or IPv6
addresses from DNS answers. these options is supported since version 2.87.

Co-authored-by: NueXini <nuexini@alumni.tongji.edu.cn>
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2022-11-12 17:05:13 +01:00
Felix Fietkau
ddf736e543 hostapd: remove invalid dtim_period option processing
dtim_period is a bss property, not a device one.
It is already handled properly in mac80211.sh

Fixes: 30c64825c7 ("hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_required")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-11-10 13:09:18 +01:00
Kevin Darbyshire-Bryant
41691ce9ac dnsmasq: remove backported CVE patch
Patch no longer applies/required since bump to v2.87

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-11-06 23:04:27 +00:00
Kevin Darbyshire-Bryant
d7f378796f dnsmasq: Support nftables nftsets
Add build option for nftables sets. By default disable iptables ipset
support.  By default enable nftable nftset support since this is what
fw4 uses.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

dnsmasq: nftset: serve from ipset config

Use existing ipset configs as source for nftsets to be compatible with
existing configs. As the OS can either have iptables XOR nftables
support, it's fine to provide both to dnsmasq. dnsmasq will silently
fail for the present one. Depending on the dnsmasq compile time options,
the ipsets or nftsets option will not be added to the dnsmasq config
file.

dnsmasq will try to add the IP addresses to all sets, regardless of the
IP version defined for the set. Adding an IPv6 to an IPv4 set and vice
versa will silently fail.

Signed-off-by: Mathias Kresin <dev@kresin.me>

dnsmasq: support populating nftsets in addition to ipsets

Tell dnsmasq to populate nftsets instead of ipsets, if firewall4 is present in
the system. Keep the same configuration syntax in /etc/config/dhcp, for
compatibility purposes.

Huge thanks to Jo-Philipp Wich for basically writing the function.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

dnsmasq: obtain nftset ip family from nft

Unfortunately dnsmasq nft is noisy if an attempt to add a mismatched ip address
family to an nft set is made.

Heuristic to guess which ip family a nft set might belong by inferring
from the set name.

In order of preference:

If setname ends with standalone '4' or '6' use that, else
if setname has '4' or '6' delimited by '-' or '_' use that (eg
foo-4-bar) else
If setname begins with '4' or '6' standalone use that.

By standalone I mean not as part of a larger number eg. 24

If the above fails then use the existing nft set query mechanism and if
that fails, well you're stuffed!

With-thanks-to: Jo-Philipp Wich <jo@mein.io> who improved my regexp
knowledge.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

dnsmasq: specify firewall table for nftset

Permit ipsets to specify an nftables table for the set.  New config
parameter is 'table'.  If not specified the default of 'fw4' is used.

config ipset
	list name 'BK_4,BK_6'
	option table 'dscpclassify'
	option table_family 'ip'
	option family '4'
	list domain 'ms-acdc.office.com'
	list domain 'windowsupdate.com'
	list domain 'update.microsoft.com'
	list domain 'graph.microsoft.com'
	list domain '1drv.ms'
	list domain '1drv.com'

The table family can also be specified, usually 'ip' or 'ip6' else the
default 'inet' capable of both ipv4 & ipv6 is used.

If the table family is not specified then finally a family option is
available to specify either '4' or '6' for ipv4 or ipv6 respectively.

This is all in addition to the existing heuristic that will look in the
nftset name for an ip family clue, or in total desperation, query the
value from the nftset itself.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-11-06 19:47:13 +00:00
Mathias Kresin
7cdf74e163 dnsmasq: add uci-defaults script for ipset migration
When running sysupgrade from an existing configuration, move existing
ipset definitions to a dedicated config section. Later on, it will allow
to serve ipset as well as nftable sets from the same configuration.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2022-11-06 19:47:13 +00:00
Kevin Darbyshire-Bryant
bf27d977f0 dnsmasq: bump to 2.87
Bump dnsmasq to 2.87 & refresh patches

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-11-06 19:47:13 +00:00
Hauke Mehrtens
002a99eccd dnsmasq: Backport DHCPv6 server fix (CVE-2022-0934)
This backports a commit from upstream dnsmasq to fix CVE-2022-0934.

CVE-2022-0934 description:
A single-byte, non-arbitrary write/use-after-free flaw was found in
dnsmasq. This flaw allows an attacker who sends a crafted packet
processed by dnsmasq, potentially causing a denial of service.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-05 22:05:47 +01:00
Glen Huang
46fbe55971 uhttpd: use procd to reload on acme renew
Calling /etc/init.d/uhttpd reload directly in the acme hotplug script
can inadvertently start a stopped instance.

Signed-off-by: Glen Huang <i@glenhuang.com>
2022-11-04 16:21:00 +01:00
Baptiste Jonglez
ef597b026b firewall: config: drop input traffic by default
This is necessary with firewall4 to avoid a hard-to-diagnose race
condition during boot, causing DNAT rules not to be taken into account
correctly.

The root cause is that, during boot, the ruleset is mostly empty, and
interface-related rules (including DNAT rules) are added incrementally.
If a packet hits the input chain before the DNAT rules are setup, it can
create buggy conntrack entries that will persist indefinitely.

This new default should be safe because firewall4 explicitly accepts
authorized traffic and rejects the rest.  Thus, in normal operations, the
default policy is not used.

Fixes: #10749
Ref: https://github.com/openwrt/openwrt/issues/10749
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
2022-11-01 23:25:39 +01:00
Hauke Mehrtens
5c70b19c42 iwinfo: update to the latest version
00aab87 Correctly identify key management algorithms starting with "FT-"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-01 18:04:39 +01:00
Hans Dedecker
63db906516 odhcpd: update to git HEAD
a92c0a7 dhcpv6-ia: make tmp lease file hidden
4a673e1 fix null pointer dereference for INFORM messages
860ca90 odhcpd: Support for Option NTP and SNTP

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2022-10-31 17:56:10 +01:00
Roland Barenbrug
cc5d8ae427 ltq-vdsl-vr9-app: extend ubus call to provide DSL statistics
Adding a new method to `ubus call dsl` to retrieve DSL statistics
used to feed the DSL charts (bit allocation, SNR, QLN and HLOG)

Signed-off-by: Roland Barenbrug <roland@treslong.com>
[fix pointer error, clean up]
Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-10-30 23:14:45 +01:00
Roland Barenbrug
5787e0c9fe ltq-vdsl-vr9-app: skip invalid line status values
DSL_G997_LineStatusData_t defines special invalid values, skip these
metrics.

Signed-off-by: Roland Barenbrug <roland@treslong.com>
[split patch]
Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-10-30 23:14:45 +01:00
Nick Hainke
0dfe1d2175 iproute2: update to 6.0.0
Release Notes:
https://lore.kernel.org/netdev/20221004082610.56b04719@hermes.local/t/

Remove upstreamed patch:
- 010-ipstats-Add-param.h-for-musl.patch

Refreshed:
- 140-keep_libmnl_optional.patch
- 145-keep_libelf_optional.patch
- 150-keep_libcap_optional.patch
- 155-keep_tirpc_optional.patch
- 170-ip_tiny.patch
- 190-fix-nls-rpath-link.patch
- 200-drop_libbsd_dependency.patch
- 300-selinux-configurable.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-10-22 22:50:36 +02:00
Nick Hainke
5479281c72 thc-ipv6: update to 3.8
Remove upstreamed patches:
- 000-cflags_override.patch

Manually refresh patches:
- 100-no-ssl.patch

Add patches:
- 101-remove-march-native.patch

Add THC_APPLETS:
- toobigsniff6
- flood_unreach6
- connect6

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-10-22 21:10:34 +02:00
Petr Štetiar
a80e198cd3 wireless-tools: add package CPE ID
Common Platform Enumeration (CPE) is a structured naming scheme for
information technology systems, software, and packages.

Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-10-19 21:40:23 +02:00
Nick Hainke
7129d1e9c9 ethtool: update to 6.0
Release Notes:
https://lwn.net/Articles/910841/

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-10-18 15:09:23 +02:00
Jo-Philipp Wich
5e2e048c0e firewall4: update to latest Git HEAD
7ae5e14 fw4: gracefully handle `null` return values from `fd.read("line")`

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-10-18 09:50:05 +02:00
Glen Huang
1bd63df263 uhttpd: use acme hotplug
Reload uhttpd after certificates are renewed with acme.

Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Glen Huang <i@glenhuang.com>
2022-10-18 08:38:07 +02:00
Jo-Philipp Wich
cb24be47ff firewall4: update to latest Git HEAD
4fbf6d7 ruleset.uc: log forwarded traffic not matched by zone policies
c7201a3 main.uc: reintroduce set reload restriction
756f1e2 ruleset: fix emitting set_mark/set_xmark rules with masks
3db4741 ruleset: properly handle zone names starting with a digit
43d8ef5 fw4: fix formatting of default log prefix
592ba45 main.uc: remove uneeded/wrong set reload restrictions
b0a6bff tests: fix testcases
145e159 fw4: recognize `option log` and `option counter` in `config nat` sections
ce050a8 fw4: fall back to device if l3_device is not available in ifstatus

Fixes: #10639, #10965
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-10-15 00:39:48 +02:00
Felix Fietkau
735f5f18dd iwinfo: update to the latest version
0496c722f1d7 nl80211: fix issues with renamed wiphy and multiple phy per device

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-14 13:12:07 +02:00
Nick Hainke
e5cab973a4
hostapd: add measurement report value for beacon reports
Add the measurement report value to the beacon reports send via ubus. It
is possible to derive from the measurement report if a station refused to
do a beacon report and why. It is important to know why a station refuses
to do a beacon-report. In particular, we should not request a beacon
report from a station again that refused a beacon-report before.

The rejection reasons can be found by looking at the bits defined by:
- MEASUREMENT_REPORT_MODE_ACCEPT
- MEASUREMENT_REPORT_MODE_REJECT_LATE
- MEASUREMENT_REPORT_MODE_REJECT_INCAPABLE
- MEASUREMENT_REPORT_MODE_REJECT_REFUSED

Suggested-by: Ian Clowes <clowes_ian@hotmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-10-13 16:53:37 +02:00
Lech Perczak
df08849c00 odhcp6c: respect 'delegate' option for 464XLAT sub-interface
dhcpv6.script contained support for disabling prefix delegation of 464XLAT
sub-interface, but netifd protocol handler was missing the required
export to disable this. Add missing export, akin to DS-Lite and MAP.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2022-10-09 19:08:36 +02:00
Daniel Cousens
3bd04767ba
build: prefer HTTPS if available (for packages)
Changes PKG_SOURCE_URL's for arptables, bsdiff, dnsmasq,
fortify-headers, ipset, ipset-dns, libaudit, libpcap, libressl,
lua, lua5.3, tcpdump and valgrind, to HTTPS

Signed-off-by: Daniel Cousens <github@dcousens.com>
2022-10-05 17:37:07 +02:00
Petr Štetiar
f1b7e1434f treewide: fix security issues by bumping all packages using libwolfssl
As wolfSSL is having hard time maintaining ABI compatibility between
releases, we need to manually force rebuild of packages depending on
libwolfssl and thus force their upgrade. Otherwise due to the ABI
handling we would endup with possibly two libwolfssl libraries in the
system, including the patched libwolfssl-5.5.1, but still have
vulnerable services running using the vulnerable libwolfssl-5.4.0.

So in order to propagate update of libwolfssl to latest stable release
done in commit ec8fb542ec ("wolfssl: fix TLSv1.3 RCE in uhttpd by
using 5.5.1-stable (CVE-2022-39173)") which fixes several remotely
exploitable vulnerabilities, we need to bump PKG_RELEASE of all
packages using wolfSSL library.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-10-03 17:52:06 +02:00
Manas Sambhus
3e2ea10e5e
qos-scripts: fix trailing whitespace in config files
Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
2022-09-27 17:16:46 +02:00
Manas Sambhus
0ca634e9ef
qos-scripts: replace modprobe by rmmod
modprobe -r is not available on all platforms, hence use rmmod

Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
2022-09-27 17:16:45 +02:00
Manas Sambhus
db0c0a31d8
ppp: use modprobe in place of insmod
This will prevent `module is already loaded` lines from
appearing in the logs when a PPP connection is reconnecting

Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
2022-09-27 17:16:42 +02:00
Kevin Darbyshire-Bryant
582c098c09 nftables: backport fix to interval based rules
'rule inet dscpclassify dscp_match  meta l4proto { udp }  th dport { 3478 }
 th sport { 3478-3497, 16384-16387 } goto ct_set_ef' works with
'nft add', but not 'nft insert', the latter yields:
"BUG: unhandled op 4".

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-09-26 18:02:15 +01:00
Felix Fietkau
c787962e1d iwinfo: update to the latest version
46f04f3808e8 devices: add MediaTek MT7986 WiSoC
b3e08c8b5a8f ops: make support for wireless extensions optional
1f695d9c7f82 nl80211: allow phy names that don't start with 'phy'
b7f9f06e1594 nl80211: fix phy/netdev index lookup
4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx>

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-22 15:26:58 +02:00
Felix Fietkau
8cb995445a hostapd: add ubus notification on sta authorized
Also include the station auth_type in the ubus and log message in order
to detect, if clients used FT or FILS to associate

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-22 15:26:58 +02:00
Felix Fietkau
6eeb5d4564 kernel: disable wireless extensions only when needed
They are only needed by a few very old drivers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-22 15:26:58 +02:00
Daniel Golle
3cee396bf8 xdp-tools: update to version 1.2.8
82628d8 libxdp: Fix resource leaks
 7fb0af0 libxdp: always clone program fd before taking ownership of it
 d8cd007 headers: Update kernel btf.h header file
 2265125 (tag: v1.2.7) xdp-filter: Update examples in documentation
 2b65008 libxdp: Fix libxdp compilation error
 2387514 xsk: remove unused variable outstanding_tx
 00b5a95 Fix section names in xsk programs
 d4ff1f9 (tag: v1.2.8) Bump TOOLS_VERSION to 1.2.8

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-20 04:33:12 +01:00
David Bauer
94037ab6b0 hostapd: update to 2022-07-29
b704dc72e tests: sigma_dut and updated ConfResult value for Configurator failures
89de431f2 DPP: Add config response status value to DPP-CONF-SENT
10104915a tests: sigma_dut and DPP PB session overlap
80d5e264c Enhance QCA vendor roam event to indicate MLO links after reassociation
662249306 Update copyright notices for the QCA vendor definitions
8adcdd659 tests: Temporary workaround for dpp_chirp_ap_5g
ddcd15c2d tests: Fix fuzzing/sae build
7fa67861a tests: Fix p2p_channel_avoid3
ee3567d65 tests: Add more time for scan/connection
1d08b238c nl80211: Allow more time for the initial scan with 6 GHz
ac9e6a2ab tests: Allow 6 GHz opclasses in MBO checks
faf9c04cb Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs
b9cd5a82f Always process pending QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH data
ef4cd8e33 QoS: Use common classifier_mask for ipv4/ipv6
93be02592 Add fixed FDD mode to qca_btc_chain_mode QCA vendor attribute
e7cbfa1c1 tests: sigma_dut and DPP Enrollee unsupported curves
5565fbee2 DPP: Check Enrollee supported curves when building Config Response
ceae05cec tests: sigma_dut and DPP MUDURL setting for hostapd
4cfb484e9 DPP: Allow dpp_controller_start without arguments in CLIs
c97000933 Fix ifdef condition for imsi_privacy_cert
2a9a61d6c tests: SAE with extended key AKM
e35f6ed1d tests: More detailed report on SAE PMKSA caching error case
f70db167a SAE: Derive a variable length PMK with the new AKM suites
91010e6f6 SAE: Indicate AKM suite selector in commit for new AKM suites
e81ec0962 SAE: Use H2E unconditionally with the new AKM suites
f8eed2e8b SAE: Store PMK length and AKM in SAE data
9dc4e9d13 SAE: EAPOL-Key and key/MIC length information for the new AKM suites
a32ef3cfb SAE: Driver capability flags for the new SAE AKM suites
91df8c9c6 SAE: Internal WPA_KEY_MGMT_* defines for extended key AKMs
5c8a714b1 SAE: Use wpa_key_mgmt_sae() helper
5456b0f26 Define new RSN AKM suite selector values
def33101c DPP: Clear push button announcement state on wpa_supplicant FLUSH
35587fa8f tests: DPP Controller/Relay with need to discover Controller
d22dfe918 DPP: Event message for indicating when Relay would need a Controller
ca7892e98 tests: DPP Relay and adding/removing connection to a Controller
bfe3cfc38 DPP: Allow Relay connections to Controllers to be added and removed
808834b18 Add a comparison function for hostapd_ip_addr
f7763880b DPP: Advertise Configurator connectivity on Relay automatically
ff7cc1d49 tests: DPP Relay and dynamic Controller addition
ca682f80a DPP: Dynamic Controller initiated connection on Relay
d2388bcca DPP: Strict validation of PKEX peer bootstrapping key during auth
a7b8cef8b DPP3: Fix push button boostrapping key passing through PKEX
69d7c8e6b DPP: Add peer=id entry for PKEX-over-TCP case
b607d2723 tests: sigma_dut and DPP PB Configurator in wpa_supplicant
1ff9251a8 DPP3: Push button Configurator in wpa_supplicant
b94e46bc7 tests: PB Configurator in wpa_supplicant
ca4e82cbf tests: sigma_dut DPP/PKEX initiator as Configurator over TCP and Wi-Fi
e9137950f DPP: Recognize own PKEX Exchange Request if it ends up being received
692956446 DPP: Note PKEX code/identifier deletion in debug log
dfa9183b1 tests: DPP reconfig after Controller-initiated operation through Relay
ae4a3a6f6 DPP: Add DPP-CONF-REQ-RX event for Controller
17216b524 tests: sigma_dut DPP/PKEX initiator as Configurator (TCP) through Relay
fb2937b85 DPP: Allow Controller to initiate PKEX through Relay
15af83cf1 DPP: Delete PKEX code and identifier on success completion of PKEX
d86ed5b72 tests: Allow DPP_PKEX_REMOVE success in dpp_pkex_hostapd_errors
0a4f391b1 tests: sigma_dut and DPP Connector Privacy
479e412a6 DPP3: Default value for dpp_connector_privacy
7d12871ba test: DPP Private Peer Introduction protocol
148de3e0d DPP3: Private Peer Introduction protocol
786ea402b HPKE base mode with single-shot API
f0273bc81 OpenSSL: Remove a forgotten debug print
f2bb0839f test: DPP 3rd party config information
68209ddbe DPP: Allow 3rd party information to be added into config object
0e2217c95 DPP: Allow 3rd party information to be added into config request obj
3d82fbe05 Add QCA vendor subcommand and attributes for SCS rule configuration
16b62ddfa QCA vendor attribute for DBAM configuration
004b1ff47 tests: DPP Controller initiating through Relay
451ede2c3 DPP: Allow AP/Relay to be configured to listed for new TCP connections
248654d36 tests: sigma_dut DPP PB test cases
697b7d7ec tests: DPP push button
7bbe85987 DPP3: Allow external configuration to be specified on AP for PB
8db786a43 DPP3: Testing functionality for push button announcements
37bccfcab DPP3: Push button bootstrap mechanism
a0054fe7c Add AP and STA specific P802.11az security capabilities (vendor command)
159e63613 QCA vendor command for CoAP offload processing
3b7bb17f6 Add QCA vendor attribute for TIM beacon statistics
09a281e52 Add QCA vendor interface for PASN offload to userspace
809fb96fa Add a vendor attribute to configure concurrency policy for AP interface
a5754f531 Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY
085a3fc76 EHT: Add 320 channel width support
bafe35df0 Move CHANWIDTH_* definitions from ieee80211_defs.h to defs.h
92f549901 tests: Remove the 80+80 vs. 160 part from wpa2_ocv_ap_vht160_mismatch
c580c2aec tests: Make OCV negative test error cases more robust
3c2ba98ad Add QCA vendor event to indicate driver recovery after internal failures
6b461f68c Set current_ssid before changing state to ASSOCIATING
8dd826741 QCA vendor attribute to configure direct data path for audio traffic
504be2f9d QCA vendor command support to get WLAN radio combinations
d5905dbc8 OCV: Check the Frequency Segment 1 Channel Number only on 80+80 MHz

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-09-20 01:15:36 +02:00
David Bauer
5110cf7ebd hostapd: don't select indoor channel on outdoor operation
Don't select channels designated for exclusive-indoor use when the
country3 element is set on outdoor operation.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-09-18 03:58:54 +02:00
Andre Heider
1afd0fefd2 ltq-[a|v]dsl-app: provide ltq-dsl-app
This makes it easier for packages to depend on any
lantiq/intel/maxlinear compatible dsl daemon.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-09-17 17:39:23 +02:00
Andre Heider
33e2115fe4 ltq-vdsl-app: rename to ltq-vdsl-vr9-app
This matches the scheme used by other target packages and will avoid
confusion with any future version.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-09-17 17:39:23 +02:00
Andre Heider
07536cff51 lantiq: rename ltq-vdsl folder to ltq-vdsl-vr9
Now PKG_NAME matches the folder name, and this will avoid confusion with
any future version.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-09-17 17:39:23 +02:00
Felix Fietkau
2b1e651178 unetd: add missing init script
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 22:02:28 +02:00
Felix Fietkau
51c727e268 unetd: update to the latest version
e065a7627a46 pex: update last query sent timestamp
6c888f897862 unet-cli: add stun server list editing support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 21:58:07 +02:00
Felix Fietkau
40874f0934 unetd: update to the latest version
21360a1b1ce6 cli: fix typo
abfebece0af1 wg-linux: ship a copy of linux/wireguard.h
1cbb1a543cb3 pex: reduce unnecessary ping traffic
0c2f39e52d5d pex: remove pex event debug spam
dcf1362c2104 pex: add support for sending/receiving global PEX messages via unix socket
df5f70b8858c ubus: notify on network updates
e58a56697131 add DHT discovery service
be175767bc67 pex: keep active pex hosts after the specified timeout
543e4a3d2ed7 pex: move rx header check to callback function
395659b9c415 pex: move raw ip send code to sendto_rawudp() in utils.c
dda15ea8b3b2 pex: add utility function to get the sockets based on type / address family
e88f2cd4d3f0 utils: add support for passings address family to network_get_endpoint()
639cdcdf6eda pex: add support for figuring out the external data port via STUN servers
9144339ebe1f pex: improve handling of a longer list of PEX hosts
38212218ecdd unet-cli: add DHT support
0d37ca75434d pex: automatically create host entries from incoming endpoint port notifications
035fcc56ef60 host: keep multiple endpoint candidates, one for each type
a089e8ae7504 pex: avoid sending a query to a host more than once every 15 seconds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 21:11:32 +02:00
Felix Fietkau
f8e3d7a4e3 unetd: select unetd from unet-cli instead of depending on it
Some people may explicitly want to select unet-cli for admin purposes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-16 21:11:32 +02:00
Felix Fietkau
55aa11d121 unetd: only depend on bpf-headers if BPF toolchain support is available
If BPF is unavailable, unetd can be built without it (by disabling VXLAN support).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-12 21:31:27 +02:00
Daniel Golle
f5d6ed3007 xdp-tools: don't rely on host bpf headers
xdp-tools build currently breaks on build hosts which do not have
libbpf headers installed because the build system wrongly tries to
use the host's include path.
Properly pass path to libbpf headers to xdp-tools build system to
fix build e.g. on the buildbots.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-12 01:43:49 +01:00
Nick Hainke
5a80226e96 lldpd: update to 1.0.15
Release Notes:
https://github.com/lldpd/lldpd/releases/tag/1.0.15

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-11 01:30:11 +02:00
Kien Truong
fa468d4bcd iproute2: add missing libbpf dependency
This patch adds libbpf to the dependencies of tc-mod-iptables.

The package tc-mod-iptables is missing libbpf as a dependency,
which leads to the build failure described in bug #9491

    LIBBPF_FORCE=on set, but couldn't find a usable libbpf

The build dependency is already automatically added because some other
packages from iproute2 depend on libbpf, but bpftools has multiple build
variants. With multiple build variants none gets build by default and
the build system will not build bpftools before iproute2.

Fixes: #9491
Signed-off-by: Kien Truong <duckientruong@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-09-11 01:30:11 +02:00
Nick Hainke
fed8550df7 xdp-tools: update to v1.2.6
Release Notes:
https://github.com/xdp-project/xdp-tools/releases/tag/v1.2.6

The update contains important fixes for cross-compilation.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:39 +01:00
Nick Hainke
8eca549bdc lldpd: add PKG_CPE_ID
Add CPE ID for tracking CVEs.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-06 16:36:37 +01:00
Nick Hainke
5c238a44e9 ethtool: add PKG_CPE_ID
Add CPE ID for tracking CVEs.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-06 16:36:35 +01:00
Felix Fietkau
09ea1db93b hostapd: rename hostapd multicast_to_unicast option to multicast_to_unicast_all
There are two feature currently altered by the multicast_to_unicast option.
1. bridge level multicast_to_unicast via IGMP snooping
2. hostapd/mac80211 config multicast_to_unicast setting

The hostapd/mac80211 setting has the side effect of converting *all* multicast
or broadcast traffic into per-station duplicated unicast traffic, which can
in some cases break expectations of various protocols.
It also has been observed to cause ARP lookup failure between stations
connected to the same interface.

The bridge level feature is much more useful, since it only covers actual
multicast traffic managed by IGMP, and it implicitly defaults to 1 already.

Renaming the hostapd/mac80211 option to multicast_to_unicast_all should avoid
unintentionally enabling this feature

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-06 12:15:48 +02:00
Felix Fietkau
90f55f5bf1 unetd: update to the latest version
f5d02c32f811 pex: add support for sending endpoint notification from the wg port via raw socket
c3b1127236a0 ubus: add support for querying active networks
8ad119715168 ubus: add support for adding auth_connect hosts at runtime
26dc52789d41 network: add support for configuring extra peers via a separate json file
d7fb9e5b065b ubus: add reload command

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-01 20:42:08 +02:00
Felix Fietkau
23a7188ab4 unetd: fix handling of connect/tunnel list
change the type to array, so that uci lists can be used

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-01 20:42:08 +02:00
Jo-Philipp Wich
ab31ffc425 firewall4: update to latest Git HEAD
f5fcdcf cli: introduce test mode and refuse firewall restart on errors
a540f6d fw4: fix cosmetic issue with per-ruleset and per-table include paths
695e821 doc: fix swapped include positions in nftables.d README

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-09-01 12:39:05 +02:00
Felix Fietkau
2984a04206 mac80211: disable ft-over-ds by default
Testing has shown it to be very unreliable in variety of configurations.
It is not mandatory, so let's disable it by default until we have a better
solution.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-30 10:58:20 +02:00
Felix Fietkau
f39d9ea0c2 unetd: update to the latest version, makes VXLAN/eBPF optional
b75791a6db25 scripts/update-cmd.pl: reorder add/remove calls to better deal with dynamic changes
c29e1ad045d0 scripts/update-cmd.pl: set device up before adding routes/addresses
5ad35ce4beea scripts/update-cmd.pl: run update two times
5d79b88f00c1 add support for overriding peer-exchange-port for individual hosts
0041fcacb624 add support for disabling VXLAN/eBPF support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-29 20:55:49 +02:00
Felix Fietkau
314cad2cba unetd: update to the latest version
5cbd55f60346 unet-cli: fix formatting of help text
59b97448b636 build.sh: force use of -fPIC on static libraries to fix build error
74a14c00abb0 pex-msg: fix siphash key initializer

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-28 22:31:18 +02:00
Nick Hainke
36bec544d7 nftables: update to 1.0.5
Remove upstreamed patch:
- 0001-meta-don-t-use-non-POSIX-formats-in-strptime.patch

Changes:
13248670 build: Bump version to 1.0.5
3432eebd tests/py: disable arp family for queue statement
180ce4d7 meta: don't use non-POSIX formats in strptime()
c1c223f1 src: allow anon set concatenation with ether and vlan
87c3041b evaluate: search stacked header list for matching payload dep
b1e3ed03 netlink_delinearize: also postprocess OP_AND in set element context
f680055c tests: add a test case for ether and vlan listing
dbd5f348 debug: dump the l2 protocol stack
0d9daa04 proto: track full stack of seen l2 protocols, not just cumulative offset
89688c94 netlink_delinearize: postprocess binary ands in concatenations
0542a431 netlink_delinearize: allow postprocessing on concatenated elements
8efab552 parser_json: fix device parsing in netdev family
76fae8f5 src: proto: support DF, LE PHB, VA for DSCP
446e76db doc: Document limitations of ipsec expression with xfrm_interface
a2ddb38f cache: report an error message if cache initialization fails
649b8ce3 cache: validate handle string length
64c74ba5 cache: prepare nft_cache_evaluate() to return error
46980cdd rule: crash when uncollapsing command with unexisting table or set
8a6cdfaf cache: release pending rules when chain binding lookup fails
e17337df evaluate: report missing interval flag when using prefix/range in concatenation
45c097c6 scanner: allow prefix in ip6 scope
6c23bfa5 segtree: fix map listing with interface wildcard
8623772a scanner: don't pop active flex scanner scope
994bf500 parser: add missing synproxy scope closure
ed2426bc tests/py: Add a test for failing ipsec after counter
27107b49 evaluate: fix segfault when adding elements to invalid set
0f82b07f mnl: store netlink error location for set elements
15b3be2e src: remove NFT_NLATTR_LOC_MAX limit for netlink location error reporting
f56e901a parser_bison: fix error location for set elements
6d1ee926 intervals: check for EXPR_F_REMOVE in case of element mismatch
5357cb7b intervals: fix crash when trying to remove element in empty set
d54510f8 netlink_delinearize: memleak when parsing concatenation data
12a223ce libnftables: release top level scope
b91bbf88 optimize: limit statement is not supported yet
45a61a75 optimize: assume verdict is same when rules have no verdict
fa409176 optimize: only merge OP_IMPLICIT and OP_EQ relational
29e62111 tests: shell: run -c -o on ruleset
887405df optimize: add unsupported statement
8f61a69e optimize: add hash expression support
ca8fd77a optimize: add numgen expression support
721efd64 optimize: add binop expression support
f7e901a2 optimize: add fib expression support
54b1e49f optimize: add xfrm expression support
0beaea37 optimize: add osf expression support
d07fe8e8 optimize: fix verdict map merging
38d48fe5 optimize: fix reject statement
f9939f89 optimize: remove comment after merging
8f10f33a optimize: do not print stateful information
3ac932e9 optimize: do not merge rules with set reference in rhs
64ebb03a optimize: do not compare relational expression rhs when collecting statements
59e3a592 intervals: Do not sort cached set elements over and over again
d434de8b intervals: do not empty cache for maps
87ba510f intervals: do not report exact overlaps for new elements
498a5f0c rule: collapse set element commands
8fafe4e6 tests: shell: runtime set element automerge
638af0ce Revert "scanner: flags: move to own scope"

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-08-28 18:29:10 +02:00
Nick Hainke
9011f987d5 iproute2: replace musl-compilation-fix with upstream fix
Instead of defining the MIN version it is enough to include "#include
<sys/param.h>".

Delete patch:
- 105-ipstats-Define-MIN-function-to-fix-undefined-referen.patch

Add patch:
- 010-ipstats-Add-param.h-for-musl.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-08-28 18:29:10 +02:00
Nick Hainke
e74b79ed56 wireguard-tools: update to v1.0.20210914
Update to latest version.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-08-28 18:29:10 +02:00
Nick Hainke
8171aad4f1 ethtool: update to 5.19
Release Notes:
https://lore.kernel.org/netdev/20220821234539.f7nslwyd53bsftsy@lion.mk-sys.cz/T/

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-08-28 18:29:10 +02:00
Etienne Champetier
0c8d7e34ab iptables: default to ip(6)tables-nft when using buildroot
35fec487e3 fixed opkg usage,
but when using buildroot we were still defaulting to
ip(6)tables-legacy

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-08-27 22:39:32 +02:00
Felix Fietkau
104de8abe4 unetd: add WireGuard based VPN connection manager for OpenWrt
This package simplifies setting up wireguard networks on OpenWrt by a wireguard
network as a JSON file, which can be shared across all participating nodes.
It can be signed with an authentication key and automatically kept in sync.
unetd also supports deterministically generating ipv6 addresses for each host
based on the public key and storing those in a hosts file that can be used with
dnsmasq. It also supports automatically creating VXLAN tunnels between multiple
endpoints.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-27 15:24:58 +02:00
Felix Fietkau
31648c4b59 netifd: update to the latest version
76d2d41b7355 interface: fix use-after-free bug when rewriting resolv.conf

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-08-25 21:16:26 +02:00
Jo-Philipp Wich
fe86b2ffaa firewall4: update to latest Git HEAD
a4484d4 fw4: support automatic includes
ca7e3a1 fw4: honour enabled option of include sections
5a02f74 tests: add missing fs.stat) mock data for `nf_conntrack_dummy`
111a7f7 fw4: don't inherit zone family from ct helpers

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-08-24 23:25:11 +02:00
Jo-Philipp Wich
4ee77cfcfa uhttpd: update to latest Git HEAD
e3395cd ucode: initialize search path before VM init
8cb3f85 ucode: initialize default library search path
188dea2 utils: accept '?' as path terminator in uh_path_match()
c5eac5d file: support using dynamic script handlers as error pages
290ff88 relay: trigger close if in header read state with pending data
f9db538 ucode: ignore exit exceptions
8ba0b64 cmake: use variables and find_library for dependency

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-08-24 23:25:11 +02:00