ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 06:57:57 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
21,901 Commits 9 Branches 75 Tags 909 MiB
6ca2970e4b
Commit Graph

99 Commits

Author SHA1 Message Date
Felix Fietkau
e36eb8579f mac80211: store the device path as identifier in the config instead of the mac address, makes it more robust against card replacement or user errors 
SVN-Revision: 33834
 2012-10-18 00:09:55 +00:00
Felix Fietkau
a31bdfbea0 mac80211: add uci support for configuring antenna gain 
SVN-Revision: 33587
 2012-09-28 18:29:22 +00:00
John Crispin
7639c9b580 mac80211/hostapd: add support for HT capa in case of IBSS/RSN 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 32830
 2012-07-24 23:07:25 +00:00
John Crispin
8b3882224a wpa_supplicant: add more parameters 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 32829
 2012-07-24 23:07:15 +00:00
Travis Kemen
62d9f257a1 mac80211: make channel bandwidth setting generic 
SVN-Revision: 32596
 2012-07-04 00:25:46 +00:00
Felix Fietkau
7c1c457855 mac80211: get rid of duplicate iw reg set command (thx, stintel) 
SVN-Revision: 31859
 2012-05-26 14:56:04 +00:00
Jo-Philipp Wich
e83f30306c mac80211: allow NOHT for IBSS mode 
SVN-Revision: 31137
 2012-03-29 12:24:43 +00:00
Felix Fietkau
877c407ade mac80211: add hostapd socket option to wpa_supplicant for IBSS RSN as well 
SVN-Revision: 31088
 2012-03-27 13:52:39 +00:00
Felix Fietkau
2143633bd2 mac80211: modify mac80211.sh to in order to support IBSS-RSN 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 31083
 2012-03-27 13:21:46 +00:00
John Crispin
a0cd381e79 mac80211: Allow preamble configuration 
Add a new wireless config parameter short_preamble=0|1 to enable
usage of short preambles. Default is to only allow long preambles
as before.

Even if short_preamble is set to 1 hostapd will take care that
short preambles are disabled as soon as a STA associates that
cannot handle short preambles.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 30539
 2012-02-14 19:07:15 +00:00
Felix Fietkau
e7c63048df mac80211: clean up init, remove some redundant checks, fix tx power init (#10113) 
SVN-Revision: 29606
 2011-12-23 19:24:38 +00:00
Felix Fietkau
b62f4e0aa2 mac80211: fix powersave setting 
SVN-Revision: 29569
 2011-12-19 10:27:28 +00:00
Felix Fietkau
fe8a3a36f0 mac80211: apply txpower after bringing up the interface, should fix #10113 
SVN-Revision: 29566
 2011-12-18 22:19:21 +00:00
Felix Fietkau
25540787ad mac80211: use iw instead of iwconfig to disable powersave 
SVN-Revision: 29565
 2011-12-18 22:18:46 +00:00
Jo-Philipp Wich
d7205a9021 mac80211: change wireless ifname numbering schema Instead of simply counting up until we hit a free iface, group ifnames by wiphy so that the first wlanX on a phy gets the phy number and following ifaces an index-suffix, e.g. wlan0 for network 1 on phy 1 and wlan0-1 for network 2 on phy 1. This fixes state var confusion when operating multiple radios and allows to reliably take down and restart one radio only, even if the number of networks changes in between. This should, along with other changes in LuCI, fix #10335. 
SVN-Revision: 28784
 2011-11-06 18:49:17 +00:00
Felix Fietkau
2e94be02a8 mac80211: set the country code early to allow crda to settle 
SVN-Revision: 28387
 2011-10-08 17:34:56 +00:00
Jo-Philipp Wich
6addd50b9d mac80211: rework mac address generation for virtual interfaces; set locally administered bit on generated macs and change the last two bytes isntead of the first one 
SVN-Revision: 28298
 2011-09-25 14:14:37 +00:00
Jo-Philipp Wich
fdfa6fdbcd mac80211: introduce "disabled" option for wifi-iface section to shutdown single networks on a radio 
SVN-Revision: 28198
 2011-09-08 23:21:36 +00:00
Jo-Philipp Wich
9d33a50cbb mac80211: configure hostapd logging options 
SVN-Revision: 28057
 2011-08-20 00:14:48 +00:00
Jo-Philipp Wich
3aa922d33c mac80211: use first available channel from current phy if channel is set to "auto" 
SVN-Revision: 27976
 2011-08-13 22:55:59 +00:00
Felix Fietkau
b4cef327ff ath9k: add a temporary uci option for setting the channel bandwidth 
SVN-Revision: 27563
 2011-07-08 17:19:42 +00:00
Felix Fietkau
e087e678af mac80211: configure HT IBSS through uci 
SVN-Revision: 27279
 2011-06-24 19:53:31 +00:00
Felix Fietkau
be3deb5b14 mac80211: broadcast the country IE by default if the country code is configured (#9308) 
SVN-Revision: 26765
 2011-04-26 19:33:27 +00:00
Vasilis Tsiligiannis
f55fe56225 mac80211: Fix unique device autodetection 
SVN-Revision: 26165
 2011-03-15 00:44:02 +00:00
Felix Fietkau
3494bdc59a mac80211: allow AP configuration of beacon interval, DTIM period, maximum permissible STA listen interval, and basic rates 
This introduces beacon_int and basic_rate (per wifi-device), and
dtim_period and max_listen_int (per wifi-iface) for mac80211. These
configure the beacon interval, basic rate specification, DTIM period
(one DTIM per this many beacon frames), and maximum listen interval
that a STA will be permitted to associate with. All of the new
settings are optional; if they're absent, the existing hostapd (or, in
the case of basic_rate, driver) defaults will be used.

The existing bintval property only used for type adhoc is moved from
wifi-iface to wifi-device, and is renamed to beacon_interval because
bintval isn't a great name. The beacon interval is property of the
wifi-device; while the choice between wifi-device and wifi-iface may
not be relevant with an adhoc network, there's no reason to configure
the same property one way for type adhoc and another for type ap. This
change isn't expected to cause many problems, as bintval was added
recently, in r25111.

Similarly, the list of basic rates, also added for type adhoc in
r25111, is a property of the device and not the interface. Further, it
ought to be represented in UCI as a list, not a string dependent on
the format that iw uses. I’ve moved it onto the device, renamed it to
basic_rate, and made it configurable for APs via hostapd. Finally, I
adapted it to use the same kb/s representation as mcast_rate; there's
precedent for this format in that it's also how madwifi interprets
mcast_rate.

Neither bintval nor basicrates were ever documented in the UCI
wireless configuration page on the wiki. When this change is
committed, I'll update the documentation as needed.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25837
 2011-03-02 21:08:28 +00:00
Felix Fietkau
718645d581 mac80211: ignore errors in the command to set the rx/tx antenna - many drivers do not support this yet 
SVN-Revision: 25192
 2011-01-28 12:01:54 +00:00
Jo-Philipp Wich
a580764a9f mac80211: fix order of iw parameters, fix broken antenna config call 
SVN-Revision: 25152
 2011-01-27 16:00:02 +00:00
Vasilis Tsiligiannis
e6a9e6875a mac80211: Fix antenna setting when only one of {rx,tx}antenna options is specified 
SVN-Revision: 25136
 2011-01-27 09:13:51 +00:00
Jo-Philipp Wich
3b0c90325e mac80211: add missing done to mac80211.sh (#8735) 
SVN-Revision: 25131
 2011-01-26 21:01:23 +00:00
Jo-Philipp Wich
49d060dc1b mac80211: add mising esac to mac80211.sh 
SVN-Revision: 25122
 2011-01-26 20:37:12 +00:00
Jo-Philipp Wich
4e369e5378 mac80211: rework recent mac80211.sh additions: - split antenna options into rxantenna and txantenna to bring it in line with broadcom and madwifi - get rid of temporary variables - follow the documented config protocol for wep keys (option key # + option key# [s:]data) 
SVN-Revision: 25116
 2011-01-26 18:01:26 +00:00
Felix Fietkau
0cd2b87f95 mac80211: Add new parameters to mac80211.sh 
Add new options 'bintval' (beacon interval), 'basicrates' (basic rates) and
'antenna' (antenna selection) for /etc/config/wireless to be used with
mac80211 drivers.

Enable WEP encryption for IBSS mode.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25111
 2011-01-26 11:34:15 +00:00
Felix Fietkau
cfdfc8c05b mac80211: Add mac address filter configuration for hostapd 
Add support of mac address filter. Now 'macfilter' and 'maclist' options
can be used with mac80211.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25105
 2011-01-26 11:33:54 +00:00
Jo-Philipp Wich
253f4d82f2 mac80211: support per-vif wmm option, defaults to 1 if unset 
SVN-Revision: 24966
 2011-01-11 13:19:53 +00:00
Jo-Philipp Wich
7526fd8627 mac80211: rename max_clients option to maxassoc, this brings it in line with broadcom 
SVN-Revision: 24726
 2010-12-19 13:33:55 +00:00
Felix Fietkau
3347f8e360 hostapd: add support for specifying the maximum number of clients 
Signed-off-by: Alexander Couzens <lynxis@c-base.org>

SVN-Revision: 24725
 2010-12-19 11:56:56 +00:00
Jo-Philipp Wich
4dcba42342 mac80211: use iw for txpower control (#8416) 
SVN-Revision: 24441
 2010-12-10 18:43:47 +00:00
Felix Fietkau
3e7589ce1a mac80211: set GF flag in hostapd config if supported 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 23673
 2010-10-27 15:04:29 +00:00
Felix Fietkau
c173d41012 mac80211: add uci support for the ad-hoc multicast rate setting 
SVN-Revision: 23637
 2010-10-25 23:51:12 +00:00
Felix Fietkau
35cdc5d722 hostapd/mac80211: implement support for AP+STA 
SVN-Revision: 23602
 2010-10-23 23:39:54 +00:00
Felix Fietkau
b7204be37b wifi: change the default channel from 5 to 11, 5 was a really bad choice 
SVN-Revision: 23423
 2010-10-13 12:22:48 +00:00
Jo-Philipp Wich
8344c770fc mac80211: fix handling of frag and rts options, thanks stintel! 
SVN-Revision: 22355
 2010-07-22 16:01:17 +00:00
Felix Fietkau
e0751eb57e mac80211: fix interface teardown for kernels >= 2.6.33 
SVN-Revision: 22078
 2010-07-06 18:53:48 +00:00
Felix Fietkau
99757d3336 mac80211: use the nl80211 driver for wpa_supplicant 
SVN-Revision: 21321
 2010-05-02 22:03:54 +00:00
Felix Fietkau
ef710f7cf3 mac80211: enable rx/tx stbc by default if supported 
SVN-Revision: 21319
 2010-05-02 22:03:44 +00:00
Felix Fietkau
8b9afa6f75 mac80211: fix interface setup for wds client sometimes an interface does not get added to the bridge properly this seems to be a race of interface setup vs wpa_supplicant fix this by configuring the interface only after wpa_supplicant has been started 
SVN-Revision: 20106
 2010-03-09 21:23:14 +00:00
Felix Fietkau
ddb6eb9d51 mac80211: add support for the noscan option for skipping the initial scan on hostapd startup 
SVN-Revision: 20089
 2010-03-09 17:36:04 +00:00
Felix Fietkau
ee2c54569f mac80211: fix essid setting for ad-hoc (thx, stintel) 
SVN-Revision: 19916
 2010-02-28 19:05:32 +00:00
Felix Fietkau
13cfa88855 mac80211: fix client mode 
SVN-Revision: 19915
 2010-02-28 19:02:05 +00:00
Felix Fietkau
1c8fbfbaa6 mac80211: fix interface startup order for AP+STA (patch by yann lopez) 
SVN-Revision: 19912
 2010-02-28 17:06:53 +00:00