mac80211: allow AP configuration of beacon interval, DTIM period, maximum permissible STA listen interval, and basic rates

This introduces beacon_int and basic_rate (per wifi-device), and
dtim_period and max_listen_int (per wifi-iface) for mac80211. These
configure the beacon interval, basic rate specification, DTIM period
(one DTIM per this many beacon frames), and maximum listen interval
that a STA will be permitted to associate with. All of the new
settings are optional; if they're absent, the existing hostapd (or, in
the case of basic_rate, driver) defaults will be used.

The existing bintval property only used for type adhoc is moved from
wifi-iface to wifi-device, and is renamed to beacon_interval because
bintval isn't a great name. The beacon interval is property of the
wifi-device; while the choice between wifi-device and wifi-iface may
not be relevant with an adhoc network, there's no reason to configure
the same property one way for type adhoc and another for type ap. This
change isn't expected to cause many problems, as bintval was added
recently, in r25111.

Similarly, the list of basic rates, also added for type adhoc in
r25111, is a property of the device and not the interface. Further, it
ought to be represented in UCI as a list, not a string dependent on
the format that iw uses. I’ve moved it onto the device, renamed it to
basic_rate, and made it configurable for APs via hostapd. Finally, I
adapted it to use the same kb/s representation as mcast_rate; there's
precedent for this format in that it's also how madwifi interprets
mcast_rate.

Neither bintval nor basicrates were ever documented in the UCI
wireless configuration page on the wiki. When this change is
committed, I'll update the documentation as needed.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25837
This commit is contained in:
Felix Fietkau 2011-03-02 21:08:28 +00:00
parent 13333a6742
commit 3494bdc59a

View File

@ -13,6 +13,8 @@ mac80211_hostapd_setup_base() {
config_get country "$device" country
config_get hwmode "$device" hwmode
config_get channel "$device" channel
config_get beacon_int "$device" beacon_int
config_get basic_rate_list "$device" basic_rate
config_get_bool noscan "$device" noscan
[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
[ "$channel" = auto ] && channel=
@ -51,6 +53,16 @@ mac80211_hostapd_setup_base() {
echo "$mac" >> $macfile
done
}
local br brval brstr
[ -n "$basic_rate_list" ] && {
for br in $basic_rate_list; do
brval="$(($br / 100))"
[ -n "$brstr" ] && brstr="$brstr "
brstr="$brstr$brval"
done
}
cat >> "$cfgfile" <<EOF
ctrl_interface=/var/run/hostapd-$phy
driver=nl80211
@ -92,8 +104,10 @@ tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
${hwmode:+hw_mode=$hwmode}
${channel:+channel=$channel}
${beacon_int:+beacon_int=$beacon_int}
${country:+country_code=$country}
${noscan:+noscan=$noscan}
${brstr:+basic_rates=$brstr}
$base_cfg
EOF
@ -127,6 +141,8 @@ mac80211_hostapd_setup_bss() {
local macaddr hidden maxassoc wmm
config_get macaddr "$vif" macaddr
config_get maxassoc "$vif" maxassoc
config_get dtim_period "$vif" dtim_period
config_get max_listen_int "$vif" max_listen_int
config_get_bool hidden "$vif" hidden 0
config_get_bool wmm "$vif" wmm 1
cat >> /var/run/hostapd-$phy.conf <<EOF
@ -134,6 +150,8 @@ $hostapd_cfg
wmm_enabled=$wmm
bssid=$macaddr
ignore_broadcast_ssid=$hidden
${dtim_period:+dtim_period=$dtim_period}
${max_listen_int:+max_listen_interval=$max_listen_int}
${maxassoc:+max_num_sta=$maxassoc}
EOF
}
@ -390,8 +408,8 @@ enable_mac80211() {
adhoc)
config_get bssid "$vif" bssid
config_get ssid "$vif" ssid
config_get bintval "$vif" bintval
config_get basicrates "$vif" basicrates
config_get beacon_int "$device" beacon_int
config_get basic_rate_list "$device" basic_rate
config_get encryption "$vif" encryption
config_get key "$vif" key 1
config_get mcast_rate "$vif" mcast_rate
@ -416,6 +434,17 @@ enable_mac80211() {
esac
}
local br brval brsub brstr
[ -n "$basic_rate_list" ] && {
for br in $basic_rate_list; do
brval="$(($br / 1000))"
brsub="$((($br / 100) % 10))"
[ "$brsub" -gt 0 ] && brval="$brval.$brsub"
[ -n "$brstr" ] && brstr="$brstr,"
brstr="$brstr$brval"
done
}
local mcval=""
[ -n "$mcast_rate" ] && {
mcval="$(($mcast_rate / 1000))"
@ -425,8 +454,8 @@ enable_mac80211() {
iw dev "$ifname" ibss join "$ssid" $freq \
${fixed:+fixed-freq} $bssid \
${bintval:+beacon-interval $bintval} \
${basicrates:+basic-rates $basicrates} \
${beacon_int:+beacon-interval $beacon_int} \
${brstr:+basic-rates $brstr} \
${mcval:+mcast-rate $mcval} \
${keyspec:+keys $keyspec}
;;