Commit Graph

906 Commits

Author SHA1 Message Date
Christian Marangi
07b57c3e80
ipq806x: fix dts error in LED color/function conversion
Fix DTS error in LED color/function conversion due to a bug in the
conversion script.

Fixes: 33e7962329 ("ipq806x: convert to new LED color/function format where possible")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-08 00:01:22 +01:00
Christian Marangi
33e7962329
ipq806x: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:37 +01:00
Christian Marangi
997acc7f86
generic: 6.1: backport at803x split patches
Backport at803x split patches merged upstream to tidy things up for the
at803x PHY driver.

New Kernel config are introduced hence any user needs to be updated.

Downstream ipq40xx patch require rework to correctly move them to the
qcom specific PHY directory.

All affected patch automatically refreshed.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-01 16:21:52 +01:00
Aleksander Jan Bajkowski
4fb04e35c9
ipq806x: drop swconfig leftovers
They are unnecessary since ipq806x switched to DSA in
the commit 337e36e0ef.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2024-01-26 16:00:22 +01:00
Christian Marangi
dac2f07c23
ipq806x: replace tsens patch with upstream version
Replace tsens patch with upstream version.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-01-21 22:45:40 +01:00
Christian Marangi
cf43e523c2
ipq806x: renumber backport patches starting from 000
Renumber backport patches starting from 000 to tidy things up.
Also fix patch name format for the mmc backport patch.

Refresh patches affected by this renumber change.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-01-21 22:42:24 +01:00
Christian Marangi
797d46c34d
generic: 6.1: move stmmac backport fix patches to generic
Move stmmac backport fix patches from ipq806x to generic backport
directory as they got merged upstream and they fix wide performance
regression.

This will eventually cause performance increase on any user of the
stmmac driver.

Generic patch automatically refreshed with make target/linux/refresh.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-01-21 22:17:25 +01:00
Christian Marangi
acf40c022e
ipq806x: DTS format fixup for Fortinet FAP-421E
Small clanup and fixup for DTS format for Fortinet FAP-421E.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-01-16 15:55:02 +01:00
Bryan Berg
84a489b7cf
ipq806x: Stabilize LAN 2 MAC address, interface ordering
Part 1 of #13629 split.

* Sets the LAN 2 MAC address in the DTS by deriving it from LAN 1's
address. The factory OS derives this from the `eth1addr` u-boot env
variable, but the nvmem_u-boot-env driver doesn't support parsing MAC
addresses from fields other than `ethaddr`. But for all of the device
samples I've checked (~10) it derives the correct MAC.

* Updates 02_network to ensure that interfaces are assigned to roles
correctly and consistently.

Signed-off-by: Bryan Berg <bdb@north-eastham.org>
2024-01-15 22:25:57 +01:00
JinGen Lim
b38d446ecd
ipq806x: add support for Fortinet FAP-421E
Hardware
--------

SoC:    Qualcomm IPQ8064
RAM:    235MB
Flash:  128MB NAND (Micron MT29F1G08ABBDAH4)
        32MB SPI-NOR (Spansion FL256SAIFRO)
WLAN2:  Qualcomm Atheros QCA9980
WLAN5:  Qualcomm Atheros QCA9980
ETH:    LAN1 - Atheros AR8035
        LAN2 - Atheros AR8033
USB:    USB-A, 2.0
LED:    Power (yellow/amber)
        LAN1 (yellow/amber)
        LAN2 (yellow/amber)
        WLAN2G (yellow)
        WLAN5G (yellow)
BTN:    Reset
Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage

MAC Address:    LAN1 (label) at APPSBL partition
                LAN2: label + 1
                WLAN2: label + 8
                WLAN5: label + 16

Installation
------------

Connect to the RJ45 console (TTL)
Connect LAN1 to host, set host ip as 192.168.1.10
Start a tftp server to serve the initramfs image
Open console connection (9600n8)
Connect power through the DC jack

`Hit any key to stop autoboot:  5`: press any key
`Enter G,Q,or H:`: press `K` to access the hidden option
`Enter password:`: `fap22b1!$` to access a limited u-boot console
`(FAP) #`: `tftpboot your_initramfs_image_name.itb`
`(FAP) #`: `bootm`

Once OpenWrt has booted, install the firmware through sysupgrade

Signed-off-by: JinGen Lim <openwrt@sn.sg>
2024-01-15 16:57:50 +01:00
John Audia
131403d8aa kernel: bump 6.1 to 6.1.70
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.70

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-01-02 18:28:58 +01:00
John Audia
4a2ff73177 kernel: bump 6.1 to 6.1.69
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69

Removed upstreamed:
	generic/backport-6.1/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1]
	generic/backport-6.1/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2]
	generic/backport-6.1/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3]
	generic/backport-6.1/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4]
	generic/backport-6.1/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=893597cbabfbc00ee51fd5f73e2028994f49ded6
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=1d82735f4bae954d5ba004994b96baec791f874f
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=4c2ad8e39c62c5288ca31ebf5c30e34f3bd9d044
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=325556d46bfd13a2fa0d304d0625be86821fd683
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=cac1218b32d7b56832dd36f7baf82f123f305a2a

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-12-21 11:26:35 +01:00
John Audia
1e6c6a36f5 kernel: bump 6.1 to 6.1.68
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68

Removed upstreamed:
	generic/backport-6.1/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1]

Manually rebased:
	mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.68&id=3759e735562a31e44fee825498f05c06e64b25a8

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-12-19 14:12:25 +01:00
Christian Marangi
3eca9ba53f
ipq806x: drop useless uci-defaults compat version script
Drop useless uci-defaults compat version script as it's not needed
anymore and should have been dropped on DSA conversion.

The script was needed for Linksys EA7500 and EA8500 for the kernel space
migration. We now handle compat version setting in board.d scripts.

Having this script with actually the wrong value (2.0) cause upgrade
problem and conflicts with board.d script.

Fixes: 337e36e0ef ("ipq806x: convert each device to DSA implementation")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-12-12 01:28:22 +01:00
Rosen Penev
8825f0fcd9
ipq806x: fix leading 0 warnings
dtc warns about leading 0s.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-12-09 16:50:53 +01:00
Rosen Penev
e1043a746a
ipq806x: avoid duplicate partition nodes
Avoids dtc warnings by moving it in a subnode.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-12-09 16:50:52 +01:00
Rosen Penev
81116ddb9b
ipq806x: reset-gpio to reset-gpios
The former is deprecated. Fixes dtc warning.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-12-09 16:50:49 +01:00
Hannu Nyman
8c2df654ad ipq806x: Fix nighthawk R7800/XR450/XR500 wan MAC
Correct the NVMEM mac-base field usage to read the wan MAC
correctly from flash.

Reference to discussion at https://github.com/openwrt/openwrt/pull/13952#issuecomment-1842749122

Fixes: d264d3a60 ("ipq806x: remove mac-address-increment")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2023-12-06 22:43:34 +01:00
John Audia
c20bedf1f5 kernel: bump 6.1 to 6.1.64
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64

Removed upstreamed:
	ixp4xx/patches-6.1/0001-mtd-cfi_cmdset_0001-Byte-swap-OTP-info.patch[1]
	mvebu/patches-6.1/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[2]
	qualcommax/patches-6.1/0026-v6.7-clk-qcom-ipq8074-drop-the-CLK_SET_RATE_PARENT-flag-f.patch[3]

Manually rebased:
	bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=3b93096d29c5b9ca2af94be4ee9949c1767acf17
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=b3fd9db79e30d5eb5f76ef1f5b7e4f444af574ea
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=877080a3490102da26b8d969588159b2385f739e

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-11-29 23:38:39 +01:00
Rosen Penev
d44c037a59
ipq806x: add missing interrupt-controller
Fixes dtc warnings

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-22 00:10:31 +01:00
Rosen Penev
d264d3a60e
ipq806x: remove mac-address-increment
It's deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-22 00:10:30 +01:00
Christian Marangi
4d9108e0bf
ipq806x: fix wrong LEDs mode for non-standard qca8k LEDs
There was a typo in the LED definition for the mode of non-standard
qca8k LEDs. Mode for link speed was wrongly set to link-10 link-100
link-1000 while the real mode in sysfs is link_10 link_100 and
link_1000.

Fix the entry to the correct mode.

Fixes: c707cff6c9 ("ipq806x: add LEDs definition for non-standard qca8k LEDs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-11-15 01:23:03 +01:00
Christian Marangi
4fdd5530a7
ipq806x: setup DSA port conduit in board.d
Now that netifd and uci-defaults.sh supports a way to setup DSA port
conduit without using iproute2 tool, set DSA port conduit directly in
board.d, that will fill board.d and will instruct netifd to setup the
port.

Drop special init.d qca8k_set_port script and ip-tiny from target dep as
they are not required anymore.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-11-10 12:30:34 +01:00
John Audia
cd86f6c24d kernel: bump 6.1 to 6.1.60
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.60

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-10-26 12:08:52 +02:00
John Audia
bb8fd41f9a kernel: bump 6.1 to 6.1.59
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.59

Manually rebased:
	bcm27xx/patches-6.1/950-0124-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch

Removed upstreamed:
	generic/backport-6.1/781-v6.6-02-net-dsa-qca8k-fix-potential-MDIO-bus-conflict-when-a.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.59&id=881050b25b1dda7b0f14d40d1b09bf38cb3b427c

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-10-21 09:33:12 +02:00
Christian Marangi
94ed8f73e1
ipq806x: fix broken onhub dtsi
Fix broken onhub dtsi. The gmac node have a redundant phy-handle that
doesn't point to the swconfig phy node as they got dropped in the DSA
conversion. Drop these extra binding to restore correct compilation of
this subtarget.

Fixes: 337e36e0ef ("ipq806x: convert each device to DSA implementation")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-10-09 11:17:25 +02:00
Christian Marangi
7fc91be564
ipq806x: fix wrong QCA8K LED definition for NEC Aterm WG2600HP3
Fix copy-paste error in migrating NEC Aterm WG2600HP3 to new LED
implementation for the QCA8K switch. Correct define the missing
additional LED pin used for each port and fix wrong color for LED 2 for
each port. Also add the required function-enumerator as all 3 LED have
the same color and function.

Fixes: c707cff6c9 ("ipq806x: add LEDs definition for non-standard qca8k LEDs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-10-05 12:40:34 +02:00
Glen Lee
3aef61060e
ipq806x: add support for Extreme Networks AP3935
Extreme Networks AP3935i/e -
https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/

SoC: IPQ8068 QYY AT46279K45060I
RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW
FLASH: NOR - S25FL256S1 - 32MB
       NAND - Macronix MX30UF4G28AB - 512MB
LAN: Atheros AR8035-A J5150WL 1515 CN - RGMII
LAN2: Atheros AR8033-AL1A SKCSR.AJ1 1444 China - SGMII
WLAN2: QCA9990 OVV FNPV209 K451406
WLAN5: QCA9990 OVV FNPV209 K451406
SERIAL: RS232 Port (115200 8n1) Cisco console cable and
        4pin Serial Header | 3.3 | GND | RX | TX

MAC address for LAN1/LAN2/WLAN 2G/WLAN 5G in uboot env

 * Installation via either RJ45 console or on-board 4 PIN header

Install Method
--------------
1) Setup TFTP server, and place
     openwrt-ipq806x-generic-extreme_ap3935-initramfs-uImage image
     in /srv/tftp or similar
2) Connect to console on router and connect ethernet port "LAN1" to
     your LAN
3) Interupt the boot with any character
4) Login with admin/new2day for default password
     (use reset/FactoryDefault if password needs to be reset)
5) Set serverip to TFTP IP: set serverip 192.168.1.2
6) Set ipaddr to another IP: set ipaddr 192.168.1.101
7) Make uboot ping something to activate eth0 on boot:
     set bootcmd 'ping 192.168.1.1; run boot_flash'
     saveenv
8) TFTP image to RAM:
     tftpboot 0x42000000
openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage
9) Boot image: bootm 0x42000000
     In OpenWRT, "LAN1" is LAN, "LAN2" is WAN
10) SFTP openwrt-ipq806x-generic-extreme_ap3935-squashfs-nand-sysupgrade.bin
     image to /tmp
11) sysupgrade /tmp/openwrt-*-nand-sysupgrade.bin

Signed-off-by: Glen Lee <g2lee@yahoo.com>
2023-10-05 00:56:57 +02:00
Christian Marangi
5d111b6714
ipq806x: disable unused SWCONFIG config flags
Disable unused SWCONFIG config flags now that we switched to DSA and are
not needed anymore.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 22:06:05 +02:00
Christian Marangi
cafa8804a4
ipq806x: add patch fixing regression from stmmac TX timer
Add patch fixing regression from stmmac TX timer.

Refer to the single patch for extensive details on the problem.

This should restore original performance before 4.19 kernel.

Fixes: #11676
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 16:55:09 +02:00
Christian Marangi
f4106c728e
ipq806x: add patch fixing regression from stmmac TX timer
Add patch fixing regression from stmmac TX timer.

Refer to the single patch for extensive details on the problem.

This should restore original performance before 4.19 kernel.

Fixes: #11676
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 16:55:04 +02:00
Christian Marangi
c707cff6c9
ipq806x: add LEDs definition for non-standard qca8k LEDs
Add LEDs definition for devices that use a non-standard qca8k LEDs
configuration.

This is to restore original setup of the LED and be on par with swconfig
old configuration.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 13:51:20 +02:00
Christian Marangi
8eab5b2526
ipq806x: enable and setup multi-CPU port for qca8k switch
Enable and setup multi-cpu for qca8k switch for ipq806x based devices.

Rework each DTS to enable the secondary CPU port on QCA8K switch and
apply the required values originally set by the OEM in the old swconfig
node.

In original firmware the first CPU port was always assigned to the WAN
port and the secondary CPU port was assigned to the rest of the LAN
port. Follow this original implementation using an init.d script.

To setup the CPU port ip tools is required. Add additional default
package ip-tiny to correctly setup the CPU port.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 13:51:20 +02:00
Christian Marangi
f166c9e617
ipq806x: move ASRock G10 fix mac preinit script to generic board.d script
Drop and move ASRock G10 preinit script to fix mac address to generic
board.d script and rework for consistency with other devices following a
similar implementation.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 13:51:19 +02:00
Christian Marangi
337e36e0ef
ipq806x: convert each device to DSA implementation
Convert each ipq806x device to DSA implementation using the qca8k
driver. Rework 02_network to follow the new naming scheme.
Update 01_leds to use netdev trigger with correct DSA port and drop
now unused switch trigger.

Currently secondary CPU is disabled and will be reneabled later.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 13:51:16 +02:00
Glen Lee
0250e4e4bc ipq806x: sync config-6.1 with latest kernel
Ran "make kernel_oldconfig" to generate

Signed-off-by: Glen Lee <g2lee@yahoo.com>
2023-09-24 18:12:30 +02:00
John Audia
e3559fb445
kernel: bump 6.1 to 6.1.54
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.54

Removed upstreamed:
	generic/backport-6.1/020-v6.3-02-UPSTREAM-mm-multi-gen-LRU-rename-lrugen-lists-to-lru.patch[1]
	ipq806x/patches-6.1/140-v6.5-hwspinlock-qcom-add-missing-regmap-config-for-SFPB-M.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.54&id=a73d04c460521e45f257d28d73df096e41ece324
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.54&id=e93bc372dbc0bde133c854c03502a95617041972

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-09-23 13:10:28 +02:00
Brian Norris
7b78a19e6a ipq806x: Correct OnHub sysupgrade config logic
There's a typo in here: board_name is a function, not a variable. This
issue was pointed out on the OpenWrt forum.

Closes: #13409

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2023-09-12 23:36:30 +02:00
Rafał Miłecki
52c365f055 kernel: backport v6.6 nvmem changes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-08-31 00:49:29 +02:00
Brian Norris
1611c21ac6 ipq806x: onhub: Enable adm_dma node
One of our SPI devices references this node, but we never enabled it.
This clutters up probe deferral logs.

(NB: this SPI device still doesn't have a real driver, so it's just here
for documentation and/or tinkering.)

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2023-08-27 22:47:02 +02:00
Brian Norris
9ea5487ea5 ipq806x: chromium: Disable kernel's CONFIG_QCOM_SPM
The qcom spm driver is currently broken for IPQ8064 OnHub devices on
kernel 6.1, such that it hangs the system when booting, much to the
consternation of users. This is especially bad as these devices don't
yet have a fully-supported release branch, and are still sometimes
landing on snapshot builds.

OnHub devices have their own kernel config, so it's not that wide of an
impact to disable this.

I haven't fully gotten to the bottom of this, but:

(a) The vendor kernel didn't have any SPM driver at all, and didn't
    utilize cpuidle.
(b) The device tree has never included any (non-disabled) cpuidle
    states, so even when this driver was present on 5.15 (last
    known-working kernel), it didn't actually do anything -- it bailed
    early, before ever doing any SPM initialization.
(c) Refactoring in Linux 5.16 [1] caused the SPM driver to be activated
    unconditionally, including setting us into standby mode
    (PM_SLEEP_MODE_STBY) by default.

Removing the one PM_SLEEP_MODE_STBY line from drivers/soc/qcom/spm.c
seems to fix the problem, but that isn't much different than simply
disabling the driver, so I go with that for now.

I also disable CONFIG_ARM_QCOM_SPM_CPUIDLE, becuase it 'select's
QCOM_SPM.

NB: it's possible there's some other deeper root cause involved in here.
For one, I notice that CPU hotplug (e.g., echo 0 >
/sys/devices/system/cpu/cpu1/online, echo 1 > ...) doesn't work right
either. Perhaps there's some mismatch on upstream Linux qcom-scm
behavior and the old boot firmware used for these systems? It wouldn't
be the first time, as we've had some similar incompatibilities on the
next generation of these devices, Google WiFi [2].

[1] Commit 60f3692b5f0b ("cpuidle: qcom_spm: Detach state machine from
    main SPM handling")
[2] [RFC] qcom_scm: IPQ4019 firmware does not support atomic API?
    https://lore.kernel.org/linux-arm-kernel/20200913201608.GA3162100@bDebian/

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2023-08-27 22:47:02 +02:00
John Audia
1e0ee72b72 kernel: bump 6.1 to 6.1.44
Changelog: https://lore.kernel.org/stable/2023080822-repost-unfiled-2f01@gregkh/

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-08-09 20:39:20 -04:00
Christian Marangi
548c437f7d
ipq806x: reorganize 02_network board.d script
Reorganize 02_network board.d script by splitting setup switch and setup
mac address.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-07-21 14:08:27 +02:00
Christian Marangi
0f1cd99b36
ipq806x: rename kernel files to generic name
Drop 6.1 tag from files directory for ipq806x now that we moved to 6.1
by default.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-07-21 14:08:27 +02:00
Christian Marangi
c2635d9b11
ipq806x: 5.15: drop useless kernel patches and dts files
Drop useless 5.15 kernel patches and files now that we moved to kernel
6.1 by default.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-07-21 14:08:26 +02:00
Christian Marangi
8db2ff827b
ipq806x: move to kernel 6.1 by default
Move to kernel 6.1 by default in preparation for DSA introduction.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-07-21 14:08:26 +02:00
Christian Marangi
d2a4b87743
ipq806x: 6.1: backport patch fixing broken hwspinlock
Backport merged patch fixing broken hwspinlock due to missing regmap
config for SFPB MMIO implementation.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-07-21 14:08:21 +02:00
John Audia
79a82d7e87 kernel: bump 6.1 to 6.1.37
Manually rebased:
	generic/hack-6.1/220-arm-gc_sections.patch
	armsr/patches-6.1/221-armsr-disable_gc_sections_armv7.patch

All other patches automatically rebased.

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-07-05 20:32:37 +02:00
Stefan Kalscheuer
b308bd50ef kernel: migrate FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER for 6.1
The flag FORCE_MAX_ZONEORDER was renamed to ARCH_FORCE_MAX_ORDER in
Kernel 6.1 [1]. Rename the flag in generic Kconfig and remove it from
target configs.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0192445cb2f7ed1cd7a95a0fc8c7645480baba25

Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
2023-06-25 11:26:50 +02:00
Christian Marangi
a860e439ed
ipq806x: 6.1: restore missing dts for Netgear XR450
In pushing and refreshing 6.1 pull request, dbac8e8819 ("ipq806x: 6.1:
copy patches, files and config from 5.15") wasn't correctly updated and
resulted in missing the dts for Netgear XR450. This caused compilation
error with Netgear R7800 or XR500 if testing kernel version was used.

Fix this by adding back the missing dts for Netgear XR450 from kernel
5.15.

Fixes: dbac8e8819 ("ipq806x: 6.1: copy patches, files and config from 5.15")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-06-17 02:21:53 +02:00