Commit Graph

2841 Commits

Author SHA1 Message Date
Fabian Bläse
0f8b9addfc gre: introduce 'nohostroute' option
It is not always necessary to add a host route for the gre peer address.

This introduces a new config option 'nohostroute' (similar to the
option introduced for wireguard in d8e2e19) to allow to disable
the creation of those routes explicitely.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2019-05-31 09:42:32 +02:00
Hans Dedecker
6636171bed netifd: fix missing ip rules after network reload (FS#2296)
beb810d iprule: fix missing ip rules after a reload (FS#2296)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-28 10:21:02 +02:00
Hans Dedecker
7d77879236 curl: bump to 7.65.0
For changes in 7.65.0; see https://curl.haxx.se/changes.html#7_65_0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-26 21:51:04 +02:00
Hans Dedecker
f54611b06d map: don't set default firewall zone to wan
Don't set the default firewall zone to wan if not specified to keep the
behavior aligned with other tunnel protocols like gre and 6rd.
If the interface zone is not specified try to get it from the firewall config
when constructing the procd firewall rule.
While at it only add procd inbound/outbound firewall rules if a zone is specified.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-26 09:44:37 +02:00
Hans Dedecker
470f5b31e3 464xlat: don't set default firewall zone to wan
Don't set the default firewall zone to wan if not specified to keep the
behavior aligned with other tunnel protocols like gre and 6rd.
If the interface zone is not specified try to get it from the firewall config
when constructing the procd firewall rule.
While at it only add a procd inbound firewall rule if a zone is specified.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-26 09:43:57 +02:00
Petr Štetiar
ace241014c ethtool: bump to 5.1
* Feature: Add support for 200Gbps (50Gbps per lane) link mode
 * Feature: simplify handling of PHY tunable downshift
 * Feature: add support for PHY tunable Fast Link Down
 * Feature: add PHY Fast Link Down tunable to man page
 * Feature: Add a 'start N' option when specifying the Rx flow hash indirection table.
 * Feature: Add bash-completion script
 * Feature: add 10000baseR_FEC link mode name
 * Fix: qsfp: fix special value comparison
 * Feature: move option parsing related code into function
 * Feature: move cmdline_coalesce out of do_scoalesce
 * Feature: introduce new ioctl for per-queue settings
 * Feature: support per-queue sub command --show-coalesce
 * Feature: support per-queue sub command --coalesce
 * Fix: fix up dump_coalesce output to match actual option names
 * Feature: fec: add pretty dump

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-05-25 13:44:43 +02:00
Koen Vandeputte
4da5ba4a6b iwinfo: update to latest git HEAD
073a838891e5 iwinfo: Complete device IDs for Ubiquiti airOS XM/XW devices
04f5a7d3a431 iwinfo: Add Mikrotik R11e-5HnD
c2cfe9d96c9a iwinfo: Fix 802.11ad channel to frequency

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-05-21 14:24:18 +02:00
Petr Štetiar
2c26dc7b41 netifd: add support for the new ar8xxx MIB counters settings
Commit "generic: ar8216: add mib_poll_interval switch attribute" has added
mib_poll_interval global config option and commit "generic: ar8216: group
MIB counters and use two basic ones only by default" has added mib_type
config option.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-05-20 21:19:48 +02:00
Hans Dedecker
a7967bada9 ppp: update to version 2.4.7.git-2019-05-18
c9d9dbf pppoe: Custom host-uniq tag
44012ae plugins/rp-pppoe: Fix compile errors

Refresh patches
Drop 520-uniq patch as upstream accepted
Drop 150-debug_compile_fix patch as fixed upstream

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-18 21:39:19 +02:00
Hans Dedecker
7b58c58733 netifd: update to latest git HEAD
22e8e58 interface-ip: use ptp address as well to find local address target
f1aa0f9 treewide: pass bool as second argument of blobmsg_check_attr

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-18 09:35:25 +02:00
Hans Dedecker
5546fe9fc3 odhcpd: update to latest git HEAD (FS#2242)
41a74cb config: remove 'ignore' config option
c0c8034 treewide: init assignment lists head
f98b7ee config: use list safe iterator in lease_delete
3c9810b dhcpv4: fix lease ordering by ip address
b60c384 config: use multi-stage parsing of uci sections
a2dd8d6 treewide: always init interface list heads during initialization
a17665e dhcpv4: do not allow pool end address to overlap with broadcast address
6b951c5 treewide: give file descriptors safe initial value
39e11ed dhcpv4: DHCP pool size is off-by-one
4a600ce dhcpv4: add support for Parameter Request List option 55
09e5eca dhcpv4: fix DHCP packet size
3cd4876 ndp: fix syslog flooding (FS#2242)
79fbba1 config: set default loglevel to LOG_WARNING

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-17 08:54:30 +02:00
Rosen Penev
2f97797471 nftables: Fix compilation with uClibc-ng
Missing header for va_list.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[updated with upstream version of the patch]
2019-05-15 13:34:23 +02:00
Hauke Mehrtens
02d4d36d4b iperf: Update to version 2.0.13
The removed patches are already integrated in the upstream version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-05-14 20:28:18 +02:00
Hans Dedecker
06403981e1 ppp: update to version 2.4.7.git-2019-05-06
fcb076c Various fixes for errors found by coverity static analysis (#109)
d98ab38 Merge branch 'pppd_print_changes' of https://github.com/nlhintz/ppp into nlhintz-pppd_print_changes

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-13 15:34:42 +02:00
Lucian Cristian
4582fe7c14 lldpd: add option to edit hostname
also fixes the annoying repeating syslog
lldp[]: unable to get system name

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-05-11 16:37:11 +02:00
Lucian Cristian
cb30971a44 lldpd: update to 1.0.3
Support for CDP PD PoE

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-05-11 16:37:11 +02:00
Hans Dedecker
165d598521 netifd: update to latest git HEAD
f6fb700 interface-ip: fine tune IPv6 mtu warning
975a5c4 interface: tidy ipv6 mtu warning

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-08 22:15:19 +02:00
Jo-Philipp Wich
f00a4ae6e0 Revert "uhttpd: disable concurrent requests by default"
This reverts commit c6aa9ff388.

Further testing has revealed that we will need to allow concurrent
requests after all, especially for situations where CGI processes
initiate further HTTP requests to the local host.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-04-23 08:15:46 +02:00
Hans Dedecker
399aa0b933 odhcpd: update to latest git HEAD (FS#2243, FS#2244)
6633efe router: fix dns search list option

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-19 19:24:39 +02:00
Rosy Song
524810ce6d dropbear: allow build without dbclient
This can save ~16KBytes size for the ipk

Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-04-18 22:34:19 +02:00
Hans Dedecker
e20c2909a5 odhcpd: update to latest git HEAD (FS#2206)
38bc630 router: use ra_lifetime as lifetime for RA options (FS#2206)
0523bdd router: improve code readibility
0a3b279 Revert "router:"
207f8e0 treewide: align syslog loglevels
f1d7da9 router:
0e048ac treewide: fix compiler warnings
83698f6 CMakeList.txt: enable extra compiler checks

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-17 14:43:38 +02:00
Hans Dedecker
3e803499c3 netifd: update to latest git HEAD
666c14f system-linux: remove debug tracing
08989e4 interface: add neighbor config support
bfd4de3 interface: fix "if-down" hotplug event handling

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-15 23:20:20 +02:00
Petr Štetiar
ecdd26fe2b umbim: update to latest git HEAD
24f9dc7 Iron out all extra compiler warnings
9d8dbc9 Enable extra compiler checks
ff8d356 mbim-proxy support
ccca03f umbim: add registration set support

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-04-15 00:01:57 +02:00
Stefan Lippers-Hollmann
8f17c019a1 hostapd: fix CVE-2019-9497, CVE-2019-9498, CVE-2019-9499
EAP-pwd missing commit validation

Published: April 10, 2019
Identifiers:
- CVE-2019-9497 (EAP-pwd server not checking for reflection attack)
- CVE-2019-9498 (EAP-pwd server missing commit validation for
  scalar/element)
- CVE-2019-9499 (EAP-pwd peer missing commit validation for
  scalar/element)

Latest version available from: https://w1.fi/security/2019-4/

Vulnerability

EAP-pwd implementation in hostapd (EAP server) and wpa_supplicant (EAP
peer) was discovered not to validate the received scalar and element
values in EAP-pwd-Commit messages properly. This could result in attacks
that would be able to complete EAP-pwd authentication exchange without
the attacker having to know the used password.

A reflection attack is possible against the EAP-pwd server since the
hostapd EAP server did not verify that the EAP-pwd-Commit contains
scalar/element values that differ from the ones the server sent out
itself. This allows the attacker to complete EAP-pwd authentication
without knowing the password, but this does not result in the attacker
being able to derive the session key (MSK), i.e., the attacker would not
be able to complete the following key exchange (e.g., 4-way handshake in
RSN/WPA).

An attack using invalid scalar/element values is possible against both
the EAP-pwd server and peer since hostapd and wpa_supplicant did not
validate these values in the received EAP-pwd-Commit messages. If the
used crypto library does not implement additional checks for the element
(EC point), this could result in attacks where the attacker could use a
specially crafted commit message values to manipulate the exchange to
result in deriving a session key value from a very small set of possible
values. This could further be used to attack the EAP-pwd server in a
practical manner. An attack against the EAP-pwd peer is slightly more
complex, but still consider practical. These invalid scalar/element
attacks could result in the attacker being able to complete
authentication and learn the session key and MSK to allow the key
exchange to be completed as well, i.e., the attacker gaining access to
the network in case of the attack against the EAP server or the attacker
being able to operate a rogue AP in case of the attack against the EAP
peer.

While similar attacks might be applicable against SAE, it should be
noted that the SAE implementation in hostapd and wpa_supplicant does
have the validation steps that were missing from the EAP-pwd
implementation and as such, these attacks do not apply to the current
SAE implementation. Old versions of wpa_supplicant/hostapd did not
include the reflection attack check in the SAE implementation, though,
since that was added in June 2015 for v2.5 (commit 6a58444d27fd 'SAE:
Verify that own/peer commit-scalar and COMMIT-ELEMENT are different').

Vulnerable versions/configurations

All hostapd versions with EAP-pwd support (CONFIG_EAP_PWD=y in the build
configuration and EAP-pwd being enabled in the runtime configuration)
are vulnerable against the reflection attack.

All wpa_supplicant and hostapd versions with EAP-pwd support
(CONFIG_EAP_PWD=y in the build configuration and EAP-pwd being enabled
in the runtime configuration) are vulnerable against the invalid
scalar/element attack when built against a crypto library that does not
have an explicit validation step on imported EC points. The following
list indicates which cases are vulnerable/not vulnerable:
- OpenSSL v1.0.2 or older: vulnerable
- OpenSSL v1.1.0 or newer: not vulnerable
- BoringSSL with commit 38feb990a183 ('Require that EC points are on the
  curve.') from September 2015: not vulnerable
- BoringSSL without commit 38feb990a183: vulnerable
- LibreSSL: vulnerable
- wolfssl: vulnerable

Acknowledgments

Thanks to Mathy Vanhoef (New York University Abu Dhabi) for discovering
and reporting the issues and for proposing changes to address them in
the implementation.

Possible mitigation steps

- Merge the following commits to wpa_supplicant/hostapd and rebuild:

  CVE-2019-9497:
  EAP-pwd server: Detect reflection attacks

  CVE-2019-9498:
  EAP-pwd server: Verify received scalar and element
  EAP-pwd: Check element x,y coordinates explicitly

  CVE-2019-9499:
  EAP-pwd client: Verify received scalar and element
  EAP-pwd: Check element x,y coordinates explicitly

  These patches are available from https://w1.fi/security/2019-4/

- Update to wpa_supplicant/hostapd v2.8 or newer, once available

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-04-11 11:26:01 +02:00
Stefan Lippers-Hollmann
57ab9e3add hostapd: fix CVE-2019-9496
hostapd: fix SAE confirm missing state validation

Published: April 10, 2019
Identifiers:
- CVE-2019-9496 (SAE confirm missing state validation in hostapd/AP)
Latest version available from: https://w1.fi/security/2019-3/

Vulnerability

When hostapd is used to operate an access point with SAE (Simultaneous
Authentication of Equals; also known as WPA3-Personal), an invalid
authentication sequence could result in the hostapd process terminating
due to a NULL pointer dereference when processing SAE confirm
message. This was caused by missing state validation steps when
processing the SAE confirm message in hostapd/AP mode.

Similar cases against the wpa_supplicant SAE station implementation had
already been tested by the hwsim test cases, but those sequences did not
trigger this specific code path in AP mode which is why the issue was
not discovered earlier.

An attacker in radio range of an access point using hostapd in SAE
configuration could use this issue to perform a denial of service attack
by forcing the hostapd process to terminate.

Vulnerable versions/configurations

All hostapd versions with SAE support (CONFIG_SAE=y in the build
configuration and SAE being enabled in the runtime configuration).

Possible mitigation steps

- Merge the following commit to hostapd and rebuild:

  SAE: Fix confirm message validation in error cases

  These patches are available from https://w1.fi/security/2019-3/

- Update to hostapd v2.8 or newer, once available

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-04-11 11:26:01 +02:00
Stefan Lippers-Hollmann
262229e924 hostapd: fix CVE-2019-9495
EAP-pwd side-channel attack

Published: April 10, 2019
Identifiers:
- CVE-2019-9495 (cache attack against EAP-pwd)
Latest version available from: https://w1.fi/security/2019-2/

Vulnerability

Number of potential side channel attacks were recently discovered in the
SAE implementations used by both hostapd and wpa_supplicant (see
security advisory 2019-1 and VU#871675). EAP-pwd uses a similar design
for deriving PWE from the password and while a specific attack against
EAP-pwd is not yet known to be tested, there is no reason to believe
that the EAP-pwd implementation would be immune against the type of
cache attack that was identified for the SAE implementation. Since the
EAP-pwd implementation in hostapd (EAP server) and wpa_supplicant (EAP
peer) does not support MODP groups, the timing attack described against
SAE is not applicable for the EAP-pwd implementation.

A novel cache-based attack against SAE handshake would likely be
applicable against the EAP-pwd implementation. Even though the
wpa_supplicant/hostapd PWE derivation iteration for EAP-pwd has
protections against timing attacks, this new cache-based attack might
enable an attacker to determine which code branch is taken in the
iteration if the attacker is able to run unprivileged code on the victim
machine (e.g., an app installed on a smart phone or potentially a
JavaScript code on a web site loaded by a web browser). This depends on
the used CPU not providing sufficient protection to prevent unprivileged
applications from observing memory access patterns through the shared
cache (which is the most likely case with today's designs).

The attacker could use information about the selected branch to learn
information about the password and combine this information from number
of handshake instances with an offline dictionary attack. With
sufficient number of handshakes and sufficiently weak password, this
might result in full recovery of the used password if that password is
not strong enough to protect against dictionary attacks.

This attack requires the attacker to be able to run a program on the
target device. This is not commonly the case on an authentication server
(EAP server), so the most likely target for this would be a client
device using EAP-pwd.

The commits listed in the end of this advisory change the EAP-pwd
implementation shared by hostapd and wpa_supplicant to perform the PWE
derivation loop using operations that use constant time and memory
access pattern to minimize the externally observable differences from
operations that depend on the password even for the case where the
attacker might be able to run unprivileged code on the same device.

Vulnerable versions/configurations

All wpa_supplicant and hostapd versions with EAP-pwd support
(CONFIG_EAP_PWD=y in the build configuration and EAP-pwd being enabled
in the runtime configuration).

It should also be noted that older versions of wpa_supplicant/hostapd
prior to v2.7 did not include additional protection against certain
timing differences. The definition of the EAP-pwd (RFC 5931) does not
describe such protection, but the same issue that was addressed in SAE
earlier can be applicable against EAP-pwd as well and as such, that
implementation specific extra protection (commit 22ac3dfebf7b, "EAP-pwd:
Mask timing of PWE derivation") is needed to avoid showing externally
visible timing differences that could leak information about the
password. Any uses of older wpa_supplicant/hostapd versions with EAP-pwd
are recommended to update to v2.7 or newer in addition to the mitigation
steps listed below for the more recently discovered issue.

Possible mitigation steps

- Merge the following commits to wpa_supplicant/hostapd and rebuild:

  OpenSSL: Use constant time operations for private bignums
  Add helper functions for constant time operations
  OpenSSL: Use constant time selection for crypto_bignum_legendre()
  EAP-pwd: Use constant time and memory access for finding the PWE

  These patches are available from https://w1.fi/security/2019-2/

- Update to wpa_supplicant/hostapd v2.8 or newer, once available

- Use strong passwords to prevent dictionary attacks

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-04-11 11:26:01 +02:00
Stefan Lippers-Hollmann
af606d077f hostapd: fix CVE-2019-9494
SAE side-channel attacks

Published: April 10, 2019
Identifiers:
- VU#871675
- CVE-2019-9494 (cache attack against SAE)
Latest version available from: https://w1.fi/security/2019-1/

Vulnerability

Number of potential side channel attacks were discovered in the SAE
implementations used by both hostapd (AP) and wpa_supplicant
(infrastructure BSS station/mesh station). SAE (Simultaneous
Authentication of Equals) is also known as WPA3-Personal. The discovered
side channel attacks may be able to leak information about the used
password based on observable timing differences and cache access
patterns. This might result in full password recovery when combined with
an offline dictionary attack and if the password is not strong enough to
protect against dictionary attacks.

Cache attack

A novel cache-based attack against SAE handshake was discovered. This
attack targets SAE with ECC groups. ECC group 19 being the mandatory
group to support and the most likely used group for SAE today, so this
attack applies to the most common SAE use case. Even though the PWE
derivation iteration in SAE has protections against timing attacks, this
new cache-based attack enables an attacker to determine which code
branch is taken in the iteration if the attacker is able to run
unprivileged code on the victim machine (e.g., an app installed on a
smart phone or potentially a JavaScript code on a web site loaded by a
web browser). This depends on the used CPU not providing sufficient
protection to prevent unprivileged applications from observing memory
access patterns through the shared cache (which is the most likely case
with today's designs).

The attacker can use information about the selected branch to learn
information about the password and combine this information from number
of handshake instances with an offline dictionary attack. With
sufficient number of handshakes and sufficiently weak password, this
might result in full discovery of the used password.

This attack requires the attacker to be able to run a program on the
target device. This is not commonly the case on access points, so the
most likely target for this would be a client device using SAE in an
infrastructure BSS or mesh BSS.

The commits listed in the end of this advisory change the SAE
implementation shared by hostapd and wpa_supplicant to perform the PWE
derivation loop using operations that use constant time and memory
access pattern to minimize the externally observable differences from
operations that depend on the password even for the case where the
attacker might be able to run unprivileged code on the same device.

Timing attack

The timing attack applies to the MODP groups 22, 23, and 24 where the
PWE generation algorithm defined for SAE can have sufficient timing
differences for an attacker to be able to determine how many rounds were
needed to find the PWE based on the used password and MAC
addresses. When the attack is repeated with multiple times, the attacker
may be able to gather enough information about the password to be able
to recover it fully using an offline dictionary attack if the password
is not strong enough to protect against dictionary attacks. This attack
could be performed by an attacker in radio range of an access point or a
station enabling the specific MODP groups.

This timing attack requires the applicable MODP groups to be enabled
explicitly in hostapd/wpa_supplicant configuration (sae_groups
parameter). All versions of hostapd/wpa_supplicant have disabled these
groups by default.

While this security advisory lists couple of commits introducing
additional protection for MODP groups in SAE, it should be noted that
the groups 22, 23, and 24 are not considered strong enough to meet the
current expectation for a secure system. As such, their use is
discouraged even if the additional protection mechanisms in the
implementation are included.

Vulnerable versions/configurations

All wpa_supplicant and hostapd versions with SAE support (CONFIG_SAE=y
in the build configuration and SAE being enabled in the runtime
configuration).

Acknowledgments

Thanks to Mathy Vanhoef (New York University Abu Dhabi) and Eyal Ronen
(Tel Aviv University) for discovering the issues and for discussions on
how to address them.

Possible mitigation steps

- Merge the following commits to wpa_supplicant/hostapd and rebuild:

  OpenSSL: Use constant time operations for private bignums
  Add helper functions for constant time operations
  OpenSSL: Use constant time selection for crypto_bignum_legendre()
  SAE: Minimize timing differences in PWE derivation
  SAE: Avoid branches in is_quadratic_residue_blind()
  SAE: Mask timing of MODP groups 22, 23, 24
  SAE: Use const_time selection for PWE in FFC
  SAE: Use constant time operations in sae_test_pwd_seed_ffc()

  These patches are available from https://w1.fi/security/2019-1/

- Update to wpa_supplicant/hostapd v2.8 or newer, once available

- In addition to either of the above alternatives, disable MODP groups
  1, 2, 5, 22, 23, and 24 by removing them from hostapd/wpa_supplicant
  sae_groups runtime configuration parameter, if they were explicitly
  enabled since those groups are not considered strong enough to meet
  current security expectations. The groups 22, 23, and 24 are related
  to the discovered side channel (timing) attack. The other groups in
  the list are consider too weak to provide sufficient security. Note
  that all these groups have been disabled by default in all
  hostapd/wpa_supplicant versions and these would be used only if
  explicitly enabled in the configuration.

- Use strong passwords to prevent dictionary attacks

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-04-11 11:26:01 +02:00
Florian Eckert
2101002b3d wireguard: remove obvious comments
Remove obvious comments to save disk space.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2019-04-09 22:25:11 +02:00
Florian Eckert
78b6931a1a wireguard: converted whitespaces from space to tab
With this change, the file is reduced from 5186 bytes to 4649 bytes that
its approximately 10.5 percent less memory consumption. For small
devices, sometimes every byte counts.
Also, all other protocol handler use tabs instead of spaces.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2019-04-09 22:25:02 +02:00
Hans Dedecker
c8a8294f6e ethtool: bump to 5.0
170d821 Release version 5.0.
909f8c0 Revert "ethtool: change to new sane powerpc64 kernel headers"
a484274 ethtool: dsa: mv88e6xxx: add pretty dump for others
034a17b ethtool: dsa: mv88e6xxx: add pretty dump for 88E6390
7f1cc44 ethtool: dsa: mv88e6xxx: add pretty dump for 88E6352
a13a053 ethtool: dsa: mv88e6xxx: add pretty dump for 88E6161
4e98029 ethtool: dsa: mv88e6xxx: add pretty dump for 88E6185
ff99e46 ethtool: dsa: mv88e6xxx: add pretty dump
cb8e980 ethtool: dsa: add pretty dump
4df55c8 ethtool: change to new sane powerpc64 kernel headers
0cb963e ethtool: zero initialize coalesce struct
8f05538 ethtool: don't report UFO on kernels v4.14 and above

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-09 14:27:59 +02:00
Hans Dedecker
80568e5854 dropbear: bump to 2019.78
Fix dbclient regression in 2019.77. After exiting the terminal would be left
in a bad state. Reported by Ryan Woodsmall

drop patch applied upstream:
	010-tty-modes-werent-reset-for-client.patch

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-07 20:32:55 +02:00
Michael Heimpold
32a6c252db wpan-tools: clean up Makefile
When we only call the default, we do not need to define it explicitly.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-04-06 19:14:06 +02:00
Jason A. Donenfeld
549d44736a wireguard: bump to 0.0.20190406
* allowedips: initialize list head when removing intermediate nodes

Fix for an important regression in removing allowed IPs from the last
snapshot. We have new test cases to catch these in the future as well.

* tools: warn if an AllowedIP has a nonzero host part

If you try to run `wg set wg0 peer ... allowed-ips 192.168.1.82/24`, wg(8)
will now print a warning. Even though we mask this automatically down to
192.168.1.0/24, usually when people specify it like this, it's a mistake.

* wg-quick: add 'strip' subcommand

The new strip subcommand prints the config file to stdout after stripping
it of all wg-quick-specific options. This enables tricks such as:
`wg addconf $DEV <(wg-quick strip $DEV)`.

* tools: avoid unneccessary next_peer assignments in sort_peers()

Small C optimization the compiler was probably already doing.

* peerlookup: rename from hashtables
* allowedips: do not use __always_inline
* device: use skb accessor functions where possible

Suggested tweaks from Dave Miller.

* blake2s: simplify
* blake2s: remove outlen parameter from final

The blake2s implementation has been simplified, since we don't use any of the
fancy tree hashing parameters or the like. We also no longer separate the
output length at initialization time from the output length at finalization
time.

* global: the _bh variety of rcu helpers have been unified
* compat: nf_nat_core.h was removed upstream
* compat: backport skb_mark_not_on_list

The usual assortment of compat fixes for Linux 5.1.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2019-04-06 17:26:47 +02:00
Daniel Engberg
de3eb0d8a0 curl: Update to 7.64.1
Update curl to 7.64.1
Remove deprecated patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-04-06 13:40:29 +02:00
Hans Dedecker
f483274422 odhcpd: update to latest git HEAD
65a9519 ndp: create ICMPv6 socket per interface
c6dae8e router: create ICMPv6 socket per interface
e7b1d4b treewide: initialize properly file descriptors

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-05 12:04:01 +02:00
Magnus Kroken
701b8d0050 openvpn: openssl: explicitly depend on deprecated APIs
OpenVPN as of 2.4.7 uses some OpenSSL APIs that are deprecated in
OpenSSL >= 1.1.0.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [white space fix]
2019-04-03 10:00:39 +02:00
Hans Dedecker
848d85d13b netifd: update to latest git HEAD
361b3e4 proto-shell: return error in case setup fails
a97297d interface: set interface in TEARDOWN state when checking link state

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-01 23:12:29 +02:00
Magnus Kroken
4376c06e80 openvpn: update to 2.4.7
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2019-04-01 11:23:43 +02:00
Hans Dedecker
6df5ab89cf odhcpd: update to latest git HEAD
7798d50 netlink: rework IPv4 address refresh logic
0b20876 netlink: rework IPv6 address refresh logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-03-29 15:55:08 +01:00
Daniel Golle
b0395cfc56 iwinfo: Fix 802.11ad channel to frequency
c2cfe9d iwinfo: Fix 802.11ad channel to frequency

Fixes 9725aa271a ("iwinfo: update to latest git HEAD")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-28 15:20:58 +01:00
Daniel Golle
28920330f8 wireguard: introduce 'nohostroute' option
Instead of creating host-routes depending on fwmark as (accidentally)
pushed by commit
1e8bb50b93 ("wireguard: do not add host-dependencies if fwmark is set")
use a new config option 'nohostroute' to explicitely prevent creation
of the route to the endpoint.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-27 22:59:03 +01:00
Daniel Golle
1e8bb50b93 wireguard: do not add host-dependencies if fwmark is set
The 'fwmark' option is used to define routing traffic to
wireguard endpoints to go through specific routing tables.
In that case it doesn't make sense to setup routes for
host-dependencies in the 'main' table, so skip setting host
dependencies if 'fwmark' is set.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-27 22:53:14 +01:00
Hans Dedecker
b2152c8e6b odhcpd: update to latest git HEAD (FS#2204)
420945c netlink: fix IPv6 address updates (FS#2204)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-03-27 21:05:07 +01:00
Konstantin Demin
01964148c6 dropbear: split ECC support to basic and full
- limit ECC support to ec*-sha2-nistp256:
  * DROPBEAR_ECC now provides only basic support for ECC
- provide full ECC support as an option:
  * DROPBEAR_ECC_FULL brings back support for ec{dh,dsa}-sha2-nistp{384,521}
- update feature costs in binary size

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:35 +01:00
Konstantin Demin
5eb7864aad dropbear: rewrite init script startup logic to handle both host key files
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:34 +01:00
Konstantin Demin
6145e59881 dropbear: change type of config option "Port" to scalar type "port"
it was never used anywhere, even LuCI works with "Port" as scalar type.

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:34 +01:00
Konstantin Demin
5d27b10c61 dropbear: introduce config option "keyfile" (replacement for "rsakeyfile")
* option "keyfile" is more generic than "rsakeyfile".
* option "rsakeyfile" is considered to be deprecated and should be removed
  in future releases.
* warn user (in syslog) if option "rsakeyfile" is used
* better check options ("rsakeyfile" and "keyfile"): don't append
  "-r keyfile" to command line if file is absent (doesn't exist or empty),
  warn user (in syslog) about such files

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:34 +01:00
Konstantin Demin
efc533cc2f dropbear: add initial support for ECC host key
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:33 +01:00
Konstantin Demin
c40a84cc15 dropbear: fix regression where TTY modes weren't reset for client
cherry-pick upstream commit 7bc6280613f5ab4ee86c14c779739070e5784dfe

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:33 +01:00
Konstantin Demin
ddf1a06326 dropbear: honour CFLAGS while building bundled libtomcrypt/libtommath
Felix Fietkau pointed out that bundled libtomcrypt/libtommath do funny stuff with CFLAGS.
fix this with checking environment variable OPENWRT_BUILD in both libs.
change in dropbear binary size is drastical: 221621 -> 164277.

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:33 +01:00
Konstantin Demin
9c3bfd0906 dropbear: fix hardening flags during configure
compiler complains about messed up CFLAGS in build log:
  <command-line>: warning: "_FORTIFY_SOURCE" redefined
  <command-line>: note: this is the location of the previous definition

and then linker fails:
  mips-openwrt-linux-musl-gcc [...] -o dropbearmulti [...]
  collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
  compilation terminated.
  /staging_dir/toolchain-mips_24kc_gcc-8.2.0_musl/mips-openwrt-linux-musl/bin/ld: /tmp/cc27zORz.ltrans0.ltrans.o: relocation R_MIPS_HI16 against `cipher_descriptor' can not be used when making a shared object; recompile with -fPIC
  /staging_dir/toolchain-mips_24kc_gcc-8.2.0_musl/mips-openwrt-linux-musl/bin/ld: /tmp/cc27zORz.ltrans1.ltrans.o: relocation R_MIPS_HI16 against `ses' can not be used when making a shared object; recompile with -fPIC
  /staging_dir/toolchain-mips_24kc_gcc-8.2.0_musl/mips-openwrt-linux-musl/bin/ld: /tmp/cc27zORz.ltrans2.ltrans.o: relocation R_MIPS_HI16 against `cipher_descriptor' can not be used when making a shared object; recompile with -fPIC
  /staging_dir/toolchain-mips_24kc_gcc-8.2.0_musl/mips-openwrt-linux-musl/bin/ld: BFD (GNU Binutils) 2.31.1 assertion fail elfxx-mips.c:6550
  [...]
  /staging_dir/toolchain-mips_24kc_gcc-8.2.0_musl/mips-openwrt-linux-musl/bin/ld: BFD (GNU Binutils) 2.31.1 assertion fail elfxx-mips.c:6550
  make[3]: *** [Makefile:198: dropbearmulti] Error 1
  make[3]: *** Deleting file 'dropbearmulti'
  make[3]: Leaving directory '/build_dir/target-mips_24kc_musl/dropbear-2018.76'
  make[2]: *** [Makefile:158: /build_dir/target-mips_24kc_musl/dropbear-2018.76/.built] Error 2
  make[2]: Leaving directory '/package/network/services/dropbear'

This FTBFS issue was caused by hardening flags set up by dropbear's configure script.

By default, Dropbear offers hardening via CFLAGS and LDFLAGS,
but this may break or confuse OpenWrt settings.

Remove most Dropbear's hardening settings in favour of precise build,
but preserve Spectre v2 mitigations:
* -mfunction-return=thunk
* -mindirect-branch=thunk

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:33 +01:00
Konstantin Demin
a1099edf32 dropbear: bump to 2019.77
- drop patches applied upstream:
  * 010-runtime-maxauthtries.patch
  * 020-Wait-to-fail-invalid-usernames.patch
  * 150-dbconvert_standalone.patch
  * 610-skip-default-keys-in-custom-runs.patch
- refresh patches
- move OpenWrt configuration from patch to Build/Configure recipe,
  thus drop patch 120-openwrt_options.patch

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2019-03-25 22:25:32 +01:00
Hauke Mehrtens
94ffb7be4d netifd: update to latest git HEAD
a8cf037 netifd: wireless: Add support for GCMP cipher
34a70b6 netifd: wireless: Add support for 802.11ad

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-03-21 17:07:52 +01:00
Hauke Mehrtens
9725aa271a iwinfo: update to latest git HEAD
ce1814b iwinfo: Add device ID for Wilocity Wil6210
a8e8275 iwinfo: Add support for 802.11ad

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-03-21 17:07:43 +01:00
Hans Dedecker
1ca69003fd odhcpd: update to latest git HEAD (FS#2160)
6d23385 dhcpv6: extra syslog tracing
b076916 dhcpv6/router: add support for mutiple master interfaces
e4a24dc ndp: fix adding proxy neighbor entries
4ca7f7e router: add extra syslog tracing
8318e93 netlink: fix neighbor event handling (FS#2160)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-03-21 16:06:10 +01:00
Deng Qingfang
31078dbc76 iproute2: update to 5.0.0
Update iproute2 to 5.0.0
Remove upstream patch 001-tc-fix-undefined-XATTR_SIZE_MAX
Alter patch 170-ip_tiny as support for IPX and DECnet is dropped
Update patch 010-cake-fwmark to match upstream commit

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-03-20 21:48:04 +01:00
Ryan Mounce
ffb2a3aa2a iproute2: add cake fwmark support
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2019-03-20 07:07:15 +10:30
Deng Qingfang
89c8232f78 ipset: size optimizations
ipset utility was linked statically to libipset. Disable static library for dynamic linking to save space.
Add -Wl,--gc-sections,--as-needed for further reduction

MIPS ipk size:
ipset: 29KiB -> 2KiB
libipset: 39KiB -> 38KiB

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-03-17 22:17:48 +01:00
Felix Fietkau
04e4b779cc mac80211: backport the txq scheduling / airtime fairness API
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-16 19:59:02 +01:00
Felix Fietkau
fd8ca8deb3 netifd: add support for suppressing the DHCP request hostname by setting it to *
dnsmasq (and probably other DHCP servers as well) does not like to hand out
leases with duplicate host names.
Adding support for skipping the hostname makes it easier to deploy setups
where it is not guaranteed to be unique

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-16 19:59:02 +01:00
Tony Ambardar
b61495409b iproute2: tc: reduce size of dynamic symbol table
In the case of SHARED_LIBS=y, don't use -export-dynamic to place *all*
symbols into the dynamic symbol table. Instead, use --dynamic-list to
export a smaller set of symbols similar to that defined in static-syms.h
in the case of SHARED_LIBS=n, avoiding an 11 KB tc package size increase.
The symbol set is based on that required by the only plugin, m_xt.so.

Also increment PKG_RELEASE.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE fixup]
2019-03-14 22:55:06 +01:00
Tony Ambardar
0b57a2165a iproute2: tc: enable and fix support for using .so plugins
This enables using the tc module m_xt.so, which uses the act_ipt kernel
module to allow tc actions based on iptables targets. e.g.

   tc filter add dev eth0 parent 1: prio 10 protocol ip \
   u32 match u32 0 0 action xt -j DSCP --set-dscp-class BE

Make the SHARED_LIBS parameter configurable and based on tc package
selection.

Fix a problem using the tc m_xt.so plugin as also described in
https://bugs.debian.org/868059:

  Sync include/xtables.h from iptables to make sure the right offset is
  used when accessing structure members defined in libxtables. One could
  get “Extension does not know id …” otherwise. (See also: #868059)

Patch to sync the included xtables.h with system iptables 1.6.x. This
continues to work with iptables 1.8.2.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-03-14 22:54:59 +01:00
Tony Ambardar
f61359e16e iproute2: support eBFP/XDP object file loading, simplify linking libelf
Add build and runtime dependencies on libelf, allowing tc and ip-full
to load BPF and XDP object files respectively.

Define package 'tc' as a singleton package variant, which can be used to
enable additional functionality limited only to tc. Also set ip-tiny
as the default 'ip' variant.

Preserve optionality of libelf by having configuration script follow the
HAVE_ELF environment variable, used similarly to the HAVE_MNL variable.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-03-14 22:54:50 +01:00
Hans Dedecker
127d38f219 netifd: update to latest git HEAD (FS#2087)
81ac3bc interface-ip: fix delegate config update on reload (FS#2087)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-03-14 13:50:51 +01:00
Hauke Mehrtens
26af8e48d3 linux-atm: Fix compile problem with kernel 4.20
This fixes the following compile problem with kernel 4.20:

In file included from arp.c:20:0:
include/linux/if_arp.h:121:16: error: 'IFNAMSIZ' undeclared here (not in a function)
  char  arp_dev[IFNAMSIZ];
                ^~~~~~~~
make[7]: *** [Makefile:459: arp.o] Error 1

This is caused by commit 6a12709da354 ("net: if_arp: use define instead
of hard-coded value") in the upstream Linux kernel which is integrated
in Linux 4.20.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-03-10 19:04:30 +01:00
Vieno Hakkerinen
c3425be082 6to4: update OpenWrt documentation URL
Signed-off-by: Vieno Hakkerinen <txt.file@txtfile.eu>
2019-03-09 18:19:18 +01:00
Jo-Philipp Wich
64bb88841f uqmi: inherit firewall zone membership to virtual sub interfaces
Fix an issue where subinterfaces were not added to the same
firewall zone as their parent.

Fixes: FS#2122
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-03-05 13:19:43 +01:00
Daniel Golle
e882d5bf31 iwinfo: update to latest git
b514490 iwinfo: add device id for MediaTek MT7603E
e9e1400 iwinfo: more Ralink and MediaTek WiSoC and PCIe chips
cb108c5 iwinfo: fix capitalization of vendor name

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-01 23:25:59 +01:00
Jason A. Donenfeld
2e9b92da1f wireguard: bump to 0.0.20190227
* wg-quick: freebsd: allow loopback to work

FreeBSD adds a route for point-to-point destination addresses. We don't
really want to specify any destination address, but unfortunately we
have to. Before we tried to cheat by giving our own address as the
destination, but this had the unfortunate effect of preventing
loopback from working on our local ip address. We work around this with
yet another kludge: we set the destination address to 127.0.0.1. Since
127.0.0.1 is already assigned to an interface, this has the same effect
of not specifying a destination address, and therefore we accomplish the
intended behavior. Note that the bad behavior is still present in Darwin,
where such workaround does not exist.

* tools: remove unused check phony declaration
* highlighter: when subtracting char, cast to unsigned
* chacha20: name enums
* tools: fight compiler slightly harder
* tools: c_acc doesn't need to be initialized
* queueing: more reasonable allocator function convention

Usual nits.

* systemd: wg-quick should depend on nss-lookup.target

Since wg-quick(8) calls wg(8) which does hostname lookups, we should
probably only run this after we're allowed to look up hostnames.

* compat: backport ALIGN_DOWN
* noise: whiten the nanoseconds portion of the timestamp

This mitigates unrelated sidechannel attacks that think they can turn
WireGuard into a useful time oracle.

* hashtables: decouple hashtable allocations from the main device allocation

The hashtable allocations are quite large, and cause the device allocation in
the net framework to stall sometimes while it tries to find a contiguous
region that can fit the device struct. To fix the allocation stalls, decouple
the hashtable allocations from the device allocation and allocate the
hashtables with kvmalloc's implicit __GFP_NORETRY so that the allocations fall
back to vmalloc with little resistance.

* chacha20poly1305: permit unaligned strides on certain platforms

The map allocations required to fix this are mostly slower than unaligned
paths.

* noise: store clamped key instead of raw key

This causes `wg show` to now show the right thing. Useful for doing
comparisons.

* compat: ipv6_stub is sometimes null

On ancient kernels, ipv6_stub is sometimes null in cases where IPv6 has
been disabled with a command line flag or other failures.

* Makefile: don't duplicate code in install and modules-install
* Makefile: make the depmod path configurable

* queueing: net-next has changed signature of skb_probe_transport_header

A 5.1 change. This could change again, but for now it allows us to keep this
snapshot aligned with our upstream submissions.

* netlink: don't remove allowed ips for new peers
* peer: only synchronize_rcu_bh and traverse trie once when removing all peers
* allowedips: maintain per-peer list of allowedips

This is a rather big and important change that makes it much much faster to do
operations involving thousands of peers. Batch peer/allowedip addition and
clearing is several orders of magnitude faster now.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2019-02-28 08:50:19 +01:00
Hans Dedecker
c8153722a2 odhcpd: update to latest git HEAD
16c5b6c ubus: always trigger an update if interface is not found

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-27 12:12:48 +01:00
David Santamaría Rogado
e9b2a1e382 omcproxy: define configuration file
omcproxy's configuration is lost on every update or installation.
Avoid it by defining the configuration file.

Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
2019-02-27 10:26:14 +01:00
Mantas Pucka
abf445f189 Revert "iw: compile with LTO enabled"
After update to 5.0.1 iw-full package failed to display command list on
ipq40xx arch. Root cause was found to be LTO reordering causing
incorrect detection of command struct size in:

iw.c:552
	cmd_size = labs((long)&__section_set - (long)&__section_get);

This reverts commit ef16a394d2.

Signed-off-by: Mantas Pucka <mantas@8devices.com>
2019-02-26 23:20:04 +01:00
Hans Dedecker
0b4b1027c6 odhcpd: update to latest git HEAD (FS#2142)
9e9389c dhcpv4: fix adding assignment in list (FS#2142)
e69265b dhcpv4: fix static lease lookup
afbd7dd dhcp: rework assignment free logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-25 12:07:52 +01:00
Alexander Couzens
b7f2adbdd3
package/dnsmasq: add max_ttl/min_cache_ttl/max_cache_ttl
max_ttl - limit the ttl in the dns answer if greater as $max_ttl
min_cache_ttl - force caching of dns answers even the ttl in the answer
		is lower than the $min_cache_ttl
max_cache_ttl - cache only dns answer for $max_cache_ttl.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2019-02-24 01:48:25 +01:00
Yousong Zhou
c17a68cc61 dnsmasq: prefer localuse over resolvfile guesswork
This makes it clear that localuse when explicitly specified in the
config will have its final say on whether or not the initscript should
touch /etc/resolv.conf, no matter whatever the result of previous
guesswork would be

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-02-23 01:58:20 +00:00
Daniel Golle
0b373bf4d6 uqmi: fix PIN_STATUS_FAILED error with MC7455 WCDMA/LTE modem
Apparently this modem replies differently to attempted --get-pin-status
which makes the script fail if a pincode is set. Fix this.

Manufacturer: Sierra Wireless, Incorporated
Model: MC7455
Revision: SWI9X30C_02.24.05.06 r7040 CARMD-EV-FRMWR2 2017/05/19 06:23:09

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-02-20 15:16:24 +01:00
Arnout Vandecappelle (Essensium/Mind)
2e0f41e73a hostapd: add Multi-AP patches and config options
Cherry-pick Multi-AP commits from uptream:
 9c06f0f6a hostapd: Add Multi-AP protocol support
 5abc7823b wpa_supplicant: Add Multi-AP backhaul STA support
 a1debd338 tests: Refactor test_multi_ap
 bfcdac1c8 Multi-AP: Don't reject backhaul STA on fronthaul BSS
 cb3c156e7 tests: Update multi_ap_fronthaul_on_ap to match implementation
 56a2d788f WPS: Add multi_ap_subelem to wps_build_wfa_ext()
 83ebf5586 wpa_supplicant: Support Multi-AP backhaul STA onboarding with WPS
 66819b07b hostapd: Support Multi-AP backhaul STA onboarding with WPS
 8682f384c hostapd: Add README-MULTI-AP
 b1daf498a tests: Multi-AP WPS provisioning

Add support for Multi-AP to the UCI configuration. Every wifi-iface gets
an option 'multi_ap'. For APs, its value can be 0 (multi-AP support
disabled), 1 (backhaul AP), 2 (fronthaul AP), or 3 (fronthaul + backhaul
AP). For STAs, it can be 0 (not a backhaul STA) or 1 (backhaul STA, can
only associate with backhaul AP).

Also add new optional parameter to wps_start ubus call of
wpa_supplicant to indicate that a Multi-AP backhaul link is required.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-02-20 13:17:11 +01:00
Hans Dedecker
1bdd3b5f7d Revert "iproute2: use tc package variant to limit other package sizes"
This reverts commit e6d84fa886 as it breaks the
installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and rdma
for the ip-full variant

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-19 15:22:28 +01:00
Hans Dedecker
de14f4301e Revert "iproute2: simplify linking libelf for eBFP/XDP object file support"
This reverts commit 26681fa6a6 as it breaks the
installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and rdma
for the ip-full variant

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-19 15:22:28 +01:00
Hans Dedecker
566bfa417e Revert "iproute2: tc: enable and fix support for using .so plugins"
This reverts commit fc80ef3613 as it breaks the
installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and
rdma for the ip-full variant

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-19 15:22:28 +01:00
Hans Dedecker
96060b3018 Revert "iproute2: tc: reduce size of dynamic symbol table"
This reverts commit 248797834b as it breaks the
installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and rdma
for the ip-full variant

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-19 15:22:28 +01:00
Yousong Zhou
ec2a2a2aea dnsmasq: allow using dnsmasq as the sole resolver
Currently it seems impossible to configure /etc/config/dhcp to achieve
the following use case

 - run dnsmasq with no-resolv
 - re-generate /etc/resolv.conf with "nameserver 127.0.0.1"

Before this change, we have to set resolvfile to /tmp/resolv.conf.auto
to achive the 2nd effect above, but setting resolvfile requires noresolv
being false.

A new boolean option "localuse" is added to indicate that we intend to
use dnsmasq as the local dns resolver.  It's false by default and to
align with old behaviour it will be true automatically if resolvfile is
set to /tmp/resolv.conf.auto

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-19 13:06:06 +00:00
Hans Dedecker
331963717b odhcpd: update to latest git HEAD
1f01299 config: fix build failure in case DHCPv4 support is disabled
67b3a14 dhcpv4: fix assignment of requested IP address
ca8ba91 dhcp: rework static lease logic
36833ea dhcpv6: rapid commit support
1ae316e dhcpv6: fix parsing of DHCPv6 relay messages
80157e1 dhcpv4: fix compile issue
671ccaa dhcpv6-ia: move function definitions to odhcpd.h
0db69b0 dhcpv6: improve code readibility
7847b27 treewide: unify dhcpv6 and dhcpv4 assignments
a54cee0 netlink: rework handling of netlink messages
9f25dd8 treewide: use avl tree to store interfaces
f21a0a7 treewide: align syslog tracing
edc5fb0 dhcpv6-ia: add full CONFIRM support
9d6eadf dhcpv6-ia: rework append_reply()

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-18 16:11:32 +01:00
Rosy Song
93b984b78a samba36: allow build with no ipv6 support
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-02-17 19:22:39 +01:00
Deng Qingfang
f5db5742e4 iw: update to 5.0.1
Refresh patches

MIPS IPK size increases:
iw-tiny: +3k
iw-full: +10k

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
[Remove sha256, nan, bloom, measurements and ftm from tiny version]
[sync nl80211 between backports and iw]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-02-17 17:33:18 +01:00
Jonas Gorski
c8a30172f8 dnsmasq: ensure test and rc order as older than final releases
Opkg treats text after a version number as higher than without:

 ~# opkg compare-versions "2.80rc1" "<<" "2.80"; echo $?
 1
 ~# opkg compare-versions "2.80rc1" ">>" "2.80"; echo $?
 0

This causes opkg not offering final release as upgradable version, and
even refusing to update, since it thinks the installed version is
higher.

This can be mitigated by adding ~ between the version and the text, as ~
will order as less than everything except itself. Since 'r' < 't', to
make sure that test will be treated as lower than rc we add a second ~
before the test tag. That way, the ordering becomes

  2.80~~test < 2.80~rc < 2.80

which then makes opkg properly treat prerelease versions as lower.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2019-02-17 16:55:24 +01:00
Felix Fietkau
5b6997dcb3 hostapd: update the fix for a race condition in mesh new peer handling
Prevent the mesh authentication state machine from getting reset on bogus
new peer discovery

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-17 16:06:44 +01:00
Felix Fietkau
f948aa4d4f hostapd: enable CONFIG_DEBUG_SYSLOG for wpa_supplicant
It was already enabled for wpad builds and since commit 6a15077e2d
the script relies on it. Size impact is minimal (2 kb on MIPS .ipk).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-17 13:05:14 +01:00
Hans Dedecker
880f8e6d32 dnsmasq: add rapid commit config option
Add config option rapidcommit to enable support for DHCPv4 rapid
commit (RFC4039)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-13 10:37:36 +01:00
Felix Fietkau
db93949aa3 hostapd: fix race condition in mesh new peer handling
Avoid trying to add the same station to the driver multiple times

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-12 15:12:35 +01:00
Felix Fietkau
6a15077e2d hostapd: send wpa_supplicant logging output to syslog
Helpful for debugging network connectivity issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-12 15:12:35 +01:00
Tony Ambardar
248797834b iproute2: tc: reduce size of dynamic symbol table
In the case of SHARED_LIBS=y, don't use -export-dynamic to place *all*
symbols into the dynamic symbol table. Instead, use --dynamic-list to
export a smaller set of symbols similar to that defined in static-syms.h
in the case of SHARED_LIBS=n, avoiding an 11 KB tc package size increase.

Also increment PKG_RELEASE.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
fc80ef3613 iproute2: tc: enable and fix support for using .so plugins
This enables using the tc module m_xt.so, which uses the act_ipt kernel
module to allow tc actions based on iptables targets. e.g.

   tc filter add dev eth0 parent 1: prio 10 protocol ip \
   u32 match u32 0 0 action xt -j DSCP --set-dscp-class BE

Make the SHARED_LIBS parameter configurable and based on tc package
selection.

Fix a problem using the tc m_xt.so plugin as also described in
https://bugs.debian.org/868059:

  Sync include/xtables.h from iptables to make sure the right offset is
  used when accessing structure members defined in libxtables. One could
  get “Extension does not know id …” otherwise. (See also: #868059)

Patch to sync the included xtables.h with system iptables 1.6.x. This
continues to work with iptables 1.8.2.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
26681fa6a6 iproute2: simplify linking libelf for eBFP/XDP object file support
Simplify build and runtime dependencies on libelf, which allows tc and ip
to load BPF and XDP object files respectively.

Preserve optionality of libelf by having configuration script follow the
HAVE_ELF environment variable, used similarly to the HAVE_MNL variable.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
e6d84fa886 iproute2: use tc package variant to limit other package sizes
Replace the old 'tc' with a singleton package variant which will be used
to enable additional functionality and limit it only to tc. Non-variant
packages will only be installed during 'tiny' variant builds, hence will
be configured without extra features, thus preserving previously limited
functionality and reduced package sizes.

Also set ip-tiny as the default variant, and install 'tiny' versions of
development libraries.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
bc86da377c iproute2: simplify Makefile, patches and fix feature detection
Compile-based feature detection (e.g. xtables, ipset support) was broken
due to silent compilation errors in the configure script, caused by a
Makefile variable KERNEL_INCLUDE referring to kernel build headers. Use
userspace headers by setting the same "user_headers" kernel include path
as used for the iptables build.

Remove redundant or unused Build/Configure definitions from package
Makefile, including KERNEL_INCLUDE, LIBC_INCLUDE and DBM includes.

Don't pass LDFLAGS within MAKE_FLAGS as this interferes with LDFLAGS in
tc/Makefile and masks a link parameter ("-Wl,-export-dynamic"). Instead,
use standard TARGET_LDFLAGS.

Replace EXTRA_CCOPTS in MAKE_FLAGS with cleaner TARGET_CPPFLAGS, and also
drop now unneeded patch 150-extra-ccopts.patch.

Enable defining XT_LIB_DIR from Makefile, needed to set the iptables
modules directory to something other than /lib/xtables, and also add
libxtables dependency. Both are needed with working xtables detection.
Note that libxtables is also pulled in by iptables, firewall or luci, so
this change has no size impact in most cases.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Tony Ambardar
43e14a2f9e iproute2: fix broken configuration patch
Since v4.13, iproute2 switched to a config.mk file with greater use of
pkg-config for library/feature detection. Replace the old Config patch
with one modifying the configure script but enabling the same changes:
 - explicitly disable TC_CONFIG_ATM
 - rely on feature detection for IP_CONFIG_SETNS and TC_CONFIG_XT

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2019-02-11 20:18:48 +00:00
Hans Dedecker
630a363936 vti: remove setting default firewall zone to wan
Same reasoning as in bdedb798150a58ad7ce3c4741f2f31df97e84c3f; don't set
default firewall zone to wan as the firewall zone for the vti interface
can be configured in the firewall config or it makes it impossible not to
specify a firewall zone for the vti interface.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-09 21:04:36 +01:00
Hans Dedecker
7f33f3d712 ipip: remove setting default firewall zone to wan
Same reasoning as in bdedb798150a58ad7ce3c4741f2f31df97e84c3f; don't set
default firewall zone to wan as the firewall zone for the ipip interface
can be configured in the firewall config or it makes it impossible not to
specify a firewall zone for the ipip interface.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-02-09 21:04:08 +01:00
Deng Qingfang
39273b849f curl: bump to 7.64.0
Fixed CVEs:

CVE-2018-16890
CVE-2019-3822
CVE-2019-3823

For other changes in version 7.64.0 see https://curl.haxx.se/changes.html#7_64_0

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-02-08 08:37:24 +01:00
Florian Eckert
bdedb79815 gre: remove setting default firewall zone to wan
There are two problems with this behaviour that the zone is set to wan
if no zone config option is defined in the interface section.

* The zone for the interface is "normally" specified in the firewall
config file. So if we have defined "no" zone for this interface zone
option is set now to "wan" additonaly if we add the interface in the firewall
config section to the "lan" zone, the interface is added to lan and wan at once.

iptables-save | grep <iface>

This is not what I expect.

* If I do not want to set a zone to this interface it is not possible.

Remove the default assigment to wan if no zone option is defined.
If some one need the option it stil possible to define this option.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2019-02-07 21:58:07 +01:00
Hans Dedecker
8399ee4543 netifd: handle hotplug event socket errors
5cd7215 system-linux: handle hotplug event socket ENOBUFS errors

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-31 22:14:55 +01:00
Kevin Darbyshire-Bryant
352db3e62a dnsmasq: latest pre-2.81 patches
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-01-31 10:13:05 +00:00
Jo-Philipp Wich
c6aa9ff388 uhttpd: disable concurrent requests by default
In order to avoid straining CPU and memory resources on lower end devices,
avoid running multiple CGI requests in parallel.

Ref: https://forum.openwrt.org/t/high-load-fix-on-openwrt-luci/29006
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-30 10:12:00 +01:00
Hans Dedecker
a3ccac6b1d iproute2: drop libbsd dependency
As the usage of libbsd is no longer limited to glibc, prevent libbsd
being picked up by removing the dependency on libbsd.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-29 14:00:13 +01:00
Felix Fietkau
4443804b54 wpa_supplicant: fix calling channel switch via wpa_cli on mesh interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-29 11:27:13 +01:00
Felix Fietkau
ae6b5815cd hostapd: add support for passing CSA events from sta/mesh to AP interfaces
Fixes handling CSA when using AP+STA or AP+Mesh

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-29 11:27:06 +01:00
Hans Dedecker
617e414643 map: depend on nat46, provide map-t
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-27 18:39:55 +01:00
Hans Dedecker
633cac0cb4 464xlat: import from routing, add myself as maintainer
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-27 18:39:18 +01:00
Martin Schiller
eaaee181d1 ppp: update to version 2.4.7.git-2018-06-23
This bumps ppp to latest git version.

There is one upstream commit, which changes DES encryption calls from
libcrypt / glibc to openssl.

As long as we don't use glibc-2.28, revert this commit.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2019-01-25 14:55:46 +01:00
Jo-Philipp Wich
b1781d5841 iproute2: replace libelf1 dependency with libelf
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-24 12:56:31 +01:00
Jo-Philipp Wich
0e70f69a35 treewide: revise library packaging
- Annotate versionless libraries (such as libubox, libuci etc.) with a fixed
  ABI_VERSION resembling the source date of the last incompatible change
- Annotate packages shipping versioned library objects with ABI_VERSION
- Stop shipping unversioned library symlinks for packages with ABI_VERSION

Ref: https://openwrt.org/docs/guide-developer/package-policies#shared_libraries
Ref: https://github.com/KanjiMonster/maintainer-tools/blob/master/check-abi-versions.pl
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-24 10:39:30 +01:00
Jason A. Donenfeld
bbcd0634f8 wireguard: bump to 0.0.20190123
* tools: curve25519: handle unaligned loads/stores safely

This should fix sporadic crashes with `wg pubkey` on certain architectures.

* netlink: auth socket changes against namespace of socket

In WireGuard, the underlying UDP socket lives in the namespace where the
interface was created and doesn't move if the interface is moved. This
allows one to create the interface in some privileged place that has
Internet access, and then move it into a container namespace that only
has the WireGuard interface for egress. Consider the following
situation:

1. Interface created in namespace A. Socket therefore lives in namespace A.
2. Interface moved to namespace B. Socket remains in namespace A.
3. Namespace B now has access to the interface and changes the listen
port and/or fwmark of socket. Change is reflected in namespace A.

This behavior is arguably _fine_ and perhaps even expected or
acceptable. But there's also an argument to be made that B should have
A's cred to do so. So, this patch adds a simple ns_capable check.

* ratelimiter: build tests with !IPV6

Should reenable building in debug mode for systems without IPv6.

* noise: replace getnstimeofday64 with ktime_get_real_ts64
* ratelimiter: totalram_pages is now a function
* qemu: enable FP on MIPS

Linux 5.0 support.

* keygen-html: bring back pure javascript implementation

Benoît Viguier has proofs that values will stay well within 2^53. We
also have an improved carry function that's much simpler. Probably more
constant time than emscripten's 64-bit integers.

* contrib: introduce simple highlighter library

This is the highlighter library being used in:
- https://twitter.com/EdgeSecurity/status/1085294681003454465
- https://twitter.com/EdgeSecurity/status/1081953278248796165

It's included here as a contrib example, so that others can paste it into
their own GUI clients for having the same strictly validating highlighting.

* netlink: use __kernel_timespec for handshake time

This readies us for Y2038. See https://lwn.net/Articles/776435/ for more info.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2019-01-23 18:06:49 +01:00
Deng Qingfang
752bd72668 iproute2: update to 4.20.0
Update to the latest version of iproute2; see https://lwn.net/Articles/776174/
for a full overview of the changes in 4.20.
Remove upstream patch 001-fix-print_0xhex-on-32-bit.patch and 002-tc-fix-xtables-incorrect-usage-of-LDFLAGS.patch
Introduce a patch to include <linux/limits.h> for XATTR_SIZE_MAX in tc

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-01-23 17:55:21 +01:00
Jeffery To
d13e86d4c2 procd: Add wrapper for uci_validate_section()
This adds a wrapper (uci_load_validate) for uci_validate_section() that
allows callers (through a callback function) to access the values set by
uci_validate_section(), without having to manually declare a
(potentially long) list of local variables.

The callback function receives two arguments when called, the config
section name and the return value of uci_validate_section().

If no callback function is given, then the wrapper exits with the value
returned by uci_validate_section().

This also updates several init scripts to use the new wrapper function.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2019-01-22 09:05:59 +01:00
Carsten Wolff
2bf22b1fb7 iputils: install ping, ping6, traceroute6 with setuid root
these utilities need to run with uid 0 to be useful. Thus,
install them setuid root like other distros do, too.

Signed-off-by: Carsten Wolff <carsten@wolffcarsten.de>
[use INSTALL_SUID macro]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-22 09:05:59 +01:00
Jo-Philipp Wich
62fbdcaf06 conntrack-tools: relocated to packages feed
In order to prepare the switch from librpc to libtirpc, we need to relocate
conntrack-tools to the packages feed.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-22 08:14:00 +01:00
Jo-Philipp Wich
797e5c1c48 packages: set more explicit ABI_VERSION values
In the case of upstream libraries, set the ABI_VERSION variable to the
soname value of the first version version after the last backwards
incompatible change.

For custom OpenWrt libraries, set the ABI_VERSION to the date of the
last Git commit doing backwards incompatible changes to the source,
such as changing function singatures or dropping exported symbols.

The soname values have been determined by either checking
https://abi-laboratory.pro/index.php?view=tracker or - in the case
of OpenWrt libraries - by carefully reviewing the changes made to
header files thorough the corresponding Git history.

In the future, the ABI_VERSION values must be bumped whenever the
library is updated to an incpompatible version but not with every
package update, in order to reduce the dependency churn in the
binary package repository.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-19 14:31:51 +01:00
Rosy Song
27be78ef46 dnsmasq: allow building without tftp server support
It saves 2871 bytes on package size while 4 bytes on memory size.

Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-01-17 22:07:06 +01:00
Hans Dedecker
76cc766521 odhcpd: fix onlink IA check (FS#2060)
0a36768 dhcpv6-ia: fix compiler warning
1893905 dhcpv6-ia: fix onlink IA check (FS#2060)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-16 23:01:05 +01:00
Kevin Darbyshire-Bryant
7541d30c9c dnsmasq: backport latest pre2.81 patches
f52bb5b fix previous commit
18eac67 Fix entries in /etc/hosts disabling static leases.
f8c77ed Fix removal of DHCP_CLIENT_MAC options from DHCPv6 relay replies.
4bf62f6 Tidy cache_blockdata_free()
9c0d445 Fix e7bfd556c079c8b5e7425aed44abc35925b24043 to actually work.
2896e24 Check for not(DS or DNSKEY) in is_outdated_cname_pointer()
a90f09d Fix crash freeing negative SRV cache entries.
5b99eae Cache SRV records.
2daca52 Fix typo in ra-param man page section.
2c59473 File logic bug in cache-marshalling code. Introduced a couple of commits back.
cc921df Remove nested struct/union in cache records and all_addr.
ab194ed Futher address union tidying.
65a01b7 Tidy address-union handling: move class into explicit argument.
bde4647 Tidy all_addr union, merge log and rcode fields.
e7bfd55 Alter DHCP address selection after DECLINE in consec-addr mode. Avoid offering the same address after a recieving a DECLINE message to stop an infinite protocol loop. This has long been done in default address allocation mode: this adds similar behaviour when allocaing addresses consecutively.

The most relevant fix for openwrt is 18eac67 (& my own local f52bb5b
which fixes a missing bracket silly) To quote the patch:

It is possible for a config entry to have one address family specified by a
dhcp-host directive and the other added from /etc/hosts. This is especially
common on OpenWrt because it uses odhcpd for DHCPv6 and IPv6 leases are
imported into dnsmasq via a hosts file.

To handle this case there need to be separate *_HOSTS flags for IPv4 and IPv6.
Otherwise when the hosts file is reloaded it will clear the CONFIG_ADDR(6) flag
which was set by the dhcp-host directive.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-01-16 15:39:54 +00:00
Hans Dedecker
4029788ff3 odhcpd: update to latest git HEAD (FS#2020)
7abbed4 dhcpv6: add setting to choose IA_NA, IA_PD or both
dd1aefd router: add syslog tracing for skipped routes
0314d58 router: filter route information option
5e99738 router: make announcing DNS info configurable (FS#2020)
1fe77f3 router: check return code of odhcpd_get_interface_dns_addr()
8f49804 config: check for invalid DNS addresses

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-15 14:02:21 +01:00
Hans Dedecker
70ffcb947c odhcp6c: update to latest git HEAD
d2e247d odhcp6c: align further with RFC8415
ce83a23 dhcpv6: avoid parsing unncessary IAs
b079733 dhcpv6: set cnt to correct IOV enum
41494da dhcpv6: get rid of request_prefix
f7437e4 dhcpv6: sanitize option request list

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-11 15:26:06 +01:00
Rafał Miłecki
ef1efa756e samba36: add package with hotplug.d script for auto sharing
The new samba36-hotplug package provides a hotplug.d script for the
"mount" subsystem. It automatically shares every mounted block device.

It works by updating /var/run/config/samba file which:
1) Is read by procd init script
2) Gets wiped on reboot providing a consistent state
3) Can be safely updated without flash wearing or conflicting with user
   changes being made in /etc/config/samba

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-01-10 10:33:40 +01:00
Rafał Miłecki
5a59e2c059 samba36: append config from /var/run/config/ for runtime shares
This will allow automation/hotplug.d scripts to store runtime shares in
the /var/run/config/samba. It's useful e.g. for USB drives that user
wants to be automatically shared.

Using /var/run/config/ provides:
1) Automated cleaning on reboots
   It's important for consistency (to avoid sharing non-existing drives)
2) Safety for user non-commited changes
   Automated scripts should never call "uci [foo] commit" as that could
   flush incomplete config.

Another minor gain is avoiding flash wearing for runtime setup.

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-01-10 10:33:40 +01:00
Hans Dedecker
fd5f0606fd firewall: update to latest git HEAD
70f8785 zones: add zone identifying local traffic in raw OUTPUT chain
6920de7 utils: Free args in __fw3_command_pipe()
6ba9105 options: redirects: Fix possible buffer overflows

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-03 17:09:51 +01:00
Hauke Mehrtens
99956528df hostapd: update to version 2018-12-02 (2.7)
This updates hostapd to version the git version from 2018-12-02 which
matches the 2.7 release.

The removed patches were are already available in the upstream code, one
additional backport is needed to fix a compile problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-02 15:47:13 +01:00
Mathias Kresin
213c0e78fa iwinfo: fix PKG_MIRROR_HASH
The PKG_MIRROR_HASH was for some reason wrong.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-30 20:33:49 +01:00
Hans Dedecker
d405edb481 omcproxy: optimize interface triggers
Before installing an interface triggger check if an interface
trigger for the interface is already in place.
This avoids installing identical interface triggers for a given
interface

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-29 16:08:31 +01:00
David Santamaría Rogado
df8f8bad08 omcproxy: fix installation of interface triggers (FS#1972)
omcproxy will not start up if either the downlink or uplink interface is
not up at boottime as the interface triggers are not correctly
installed.

Further rework omcproxy init to make use of network functions defined
in network.sh; set proper family and proto options in procd firewall
rules.

Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-29 16:07:51 +01:00
Mathias Kresin
a5030f8b10 iwinfo: update to latest git
dd508af iwinfo: fix QCA9984 vendor id
0eaabf1 iwinfo: add device id for Atheros AR9287
6e998ec iwinfo: add device id for MediaTek MT7612E
5aa8c54 libiwinfo: nl80211: add mesh stats on assoclist.
77a9e98 iwinfo: Add Mikrotik R11e-2HPnD and R11e-5HacT to hardware list

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-29 12:35:47 +01:00
Rafał Miłecki
ae622c93b3 Revert "samba36: add hotplug support"
This reverts commit fd569e5e9d.

After an extra review & discussion few concerns were raised regarding
that feature:
1) It reacts to hotplug.d "block" events instead of more accurate (but
   currently unavailable) "mount" events.
2) It requires *something* to mount block device before samba hotplug.d
   gets fired. Otherwise samba_add_section() will just return.
3) It doesn't reload Samba which some users may expect
4) It operates on /etc/ which is not a right place for autogenerated
   ephemeral config.
5) It doesn't include any cleanup for non-existing shares.

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-28 23:09:38 +01:00
Stijn Tintel
c5b89abe2a lldpd: consolidate CONFIGURE_VARS
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-12-28 12:19:32 +02:00
Daniel Engberg
9a37c95431 wireguard: Update to snapshot 0.0.20181218
Update WireGuard to 0.0.20181218

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-12-24 12:58:22 +01:00
Deng Qingfang
0babdf2d2b curl: bump to 7.63.0
Refresh patches, for changes in version 7.63.0 see https://curl.haxx.se/changes.html#7_63_0

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-24 09:46:06 +01:00
Hans Dedecker
f36bc3f9b1 odhcpd: use PKG_VERSION default value
Instrad of defining PKG_VERSION in the Makefile use the PKG_VERSION
default value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-21 18:30:01 +01:00
Hans Dedecker
9b8ea3623b odhcpd: add PKG_VERSION again
Fixes commit 63d0752ca8

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-20 16:50:08 +01:00
Hans Dedecker
63d0752ca8 odhcpd: update to latest git HEAD
2d2a3b8 odhcpd: switch to libubox container_of implementation
2a71c1e treewide: switch to libubox ARRAY_SIZE immplementation

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-20 15:43:31 +01:00
Jo-Philipp Wich
de7ae9a0ef iproute2: require nls infrastructure due to libelf linking
Depending on the global nls support configuration in the buildroot, the
linked libelf.so library might depend on libintl.so.

Import the nls.mk helper to set library prefixes and flags accordingly
in this case.

Ref: https://github.com/openwrt/packages/issues/7728#issuecomment-448760140
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-20 08:13:24 +01:00
Jo-Philipp Wich
386803a006 iproute2: only link libelf where needed
The iproute2 build system links libelf support to every utility while only
the tc program actually requires libelf specific functionality.

Unfortunately the BPF ELF functionality is not confined into an own
compilation unit but added to the existing bpf.c sources of the shared
static libutil.a, causing every iproute2 applet to pick up an implicit
libelf.so dependency.

In order to avoid this requirement, patch the iproute2 build system to
create both a libutil.a and a libutil-elf.a, with the former being built
without libelf functionality and to only link the tc applet with the libelf
enabled libutil.

Finally, make the tc package depend on libelf to solve compilation errors.

Ref: https://github.com/openwrt/packages/issues/7728
Fixes: FS#2011
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-19 10:50:02 +01:00
Hans Dedecker
83109450ce dropbear: fix dropbear startup issue
Interface triggers are installed by the dropbear init script in case an
interface is configured for a given dropbear uci section.
As dropbear is started after network the interface trigger event can be
missed during a small window; this is especially the case if lan is
specified as interface.
Fix this by starting dropbear before network so no interface trigger
is missed. As dropbear is started earlier than netifd add a boot function
to avoid the usage of network.sh functions as call to such functions will
fail at boottime.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2018-12-18 19:43:22 +01:00
Syrone Wong
6263a9baa3 ipset: update to 7.1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2018-12-17 21:57:22 +01:00
Kevin Darbyshire-Bryant
3f7de917be netifd: fix ipv6 multicast check in previous commit
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-12-17 19:05:07 +00:00
Kevin Darbyshire-Bryant
d112d095a9 netifd: support configuring class e 240.0.0.0/4 addresses
cd089c5 proto: Support class-e addressing in netifd

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-12-17 09:27:53 +00:00
Hans Dedecker
3262fce1cd omcproxy: use PROJECT_GIT in PKG_SOURCE_URL
Switch PKG_SOURCE_URL to git.openwrt.org

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-16 19:23:36 +01:00
Hans Dedecker
0074a5e67e omcproxy: switch to OpenWrt github repo
Switch to OpenWrt github repo in PKG_SOURCE_URL so we can
remove the out of tree patch

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-16 18:09:23 +01:00
Hauke Mehrtens
835947ce64 hostapd: Make eapol-test depend on libubus
The eapol-test application also uses the code with the newly activated
ubus support, add the missing dependency.

Fixes: f5753aae23 ("hostapd: add support for WPS pushbutton station")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 14:25:41 +01:00
Rosen Penev
1e98d985bb swconfig: Add missing include
Fixes these warnings:

swlib.c:455:18: warning: implicit declaration of function 'isspace'
swlib.c:461:9: warning: implicit declaration of function 'isdigit'

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-12-16 00:57:19 +01:00
Eneas U de Queiroz
cb4d00d184 omcproxy: fix compilation on little-endian CPUs
Don't use cpu_to_be32 outside of a function.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-12-16 00:57:19 +01:00
Kevin Darbyshire-Bryant
9048b22e67 dnsmasq: Fix dhcp-boot, dhcp-reply-delay and pxe-prompt regressions
The above options were incorrectly changed to required tags.  Make them
optional again.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-12-14 17:51:42 +00:00