ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 18:19:02 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
32,744 Commits 10 Branches 76 Tags 896 MiB
61366c95e2
Commit Graph

54 Commits

Author SHA1 Message Date
John Crispin
228eeb647e ramips: make the alsa driver register the codec 
this allows using the codec even if it is not listed in the DTS

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47256
 2015-10-26 09:00:42 +00:00
John Crispin
e043ada1d5 ramips: gpio-mt7621 was not handling irqs above 31 properly 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47238
 2015-10-20 07:09:20 +00:00
John Crispin
7295e9fb8b ramips: add alsa support 
add the SDK alsa driver. this has only been tested on mt7628/88 and wm8960.
mt7620 is only compile tested.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47205
 2015-10-19 10:07:54 +00:00
John Crispin
f5d5cb0114 ramips: add a baurate hack 
When talking to an atmel controller we need 9600 or 250000 baud.
as 250000 does not exist we use 2500000.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47204
 2015-10-19 10:07:43 +00:00
John Crispin
51dd991d39 ramips: add LinkIt Smart7688 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47203
 2015-10-19 10:07:38 +00:00
Felix Fietkau
38389c79c2 ramips: improve read performance of the m25p80 chunked io patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47137
 2015-10-05 11:34:16 +00:00
John Crispin
b4db6d29d3 ramips: improve systick timer 
when sleep mode is disable use MIPS as clocksource and clockevent instead of systick.
because MIPS timer has higher resolution 5ns less than systick 20us and
larger counter bits 32 > 16.
clean interrupt by write compare register at isr.
fix typo cause sleep mode not enable.

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47122
 2015-10-05 10:27:09 +00:00
John Crispin
10f75a2b7f ramips: fix use remove_irq to release irqaction resource 
Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47121
 2015-10-05 10:27:04 +00:00
John Crispin
d4cd8f89eb ramips: Ralink RT3883 RGMII pinmux fix. 
Due to datasheet of rt3883 SoC rgmii1 port handles pins 84-95 and rgmii2 port handles pins 72-83. When this function ports gets added to rt3883_pinmux_data there's wrong pinmux bits set (RT3883_GPIO_MODE_GE1 manages 84-95 pins and RT3883_GPIO_MODE_GE2 manages 72-83). So when enabling rgmii2 as GPIO driver confuses hardware and nothing work, neither rgmii nor gpio.
Also in '0030-pinctrl-ralink-add-pinctrl-driver.patch' typo in name of rgmii2 port.

Signed-off-by: Nick Leiten <nickleiten@gmail.com>

SVN-Revision: 47118
 2015-10-05 10:26:40 +00:00
John Crispin
e1b1b0cbfd ralink: the mmc driver can now handle CD lines that are active low 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47074
 2015-10-01 18:13:47 +00:00
John Crispin
9e1268b168 ralink: speed selection was broken in spi-mt7621 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47073
 2015-10-01 15:35:44 +00:00
John Crispin
f453508b3e ramips: Fix pinmux functions for MT7621 
The pinctrl-rt2880 code doesn't support multiple functions with the same
name. This will result in a incorrect pinmux configuration.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46963
 2015-09-16 08:31:52 +00:00
John Crispin
3a149a2910 ramips: add mt7621/3/8 support to the I2C driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46959
 2015-09-16 08:31:15 +00:00
John Crispin
e6a9d5edf2 ramips: fix reported vendor name 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46958
 2015-09-16 08:31:10 +00:00
John Crispin
86a1e46b63 ramips: add proper mt7688 detection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46957
 2015-09-16 08:31:00 +00:00
John Crispin
85d5b9984d ramips: add speed and mode settings to spi-mt7621 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46956
 2015-09-16 08:30:43 +00:00
John Crispin
38c28154bd ramips: add get_direction() callback and irq support to gpio-mt7621 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46955
 2015-09-16 08:30:17 +00:00
John Crispin
23d79b60ce ramips: more m7628 pinmux fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46954
 2015-09-16 08:30:06 +00:00
John Crispin
9473837653 ramips: add mt7628 pwm driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46953
 2015-09-16 08:29:55 +00:00
John Crispin
9dfe1f6fbe ramips: make pinctrl work on newer socs 
newer socs have 2 mux registers

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46952
 2015-09-16 08:29:45 +00:00
John Crispin
710520d5c7 ramips: make the mt7628 spi driver work for both cs lines 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46951
 2015-09-16 08:29:40 +00:00
John Crispin
6f07b8a659 ramips: make the early_printk code detect which uart is used 
only tested on mt7628

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46950
 2015-09-16 08:29:31 +00:00
Felix Fietkau
fcee359813 ramips: fix chunked-io support for big flash chips (#20504) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46904
 2015-09-14 06:54:15 +00:00
Jonas Gorski
7d6cff4882 kernel: update 3.18 to 3.18.21 
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768
 2015-09-02 10:18:15 +00:00
Felix Fietkau
7747092ed1 ramips: fix devicetree corruption with some boot loaders if the caches are not ready at boot 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46766
 2015-09-02 09:24:05 +00:00
John Crispin
402c2d008b ramips: move patches around 
0073 needs to applied afert 0102

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46667
 2015-08-17 10:13:46 +00:00
John Crispin
aa4c6e27b4 ramips: reorder patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46659
 2015-08-17 06:18:30 +00:00
John Crispin
87df7da757 ramips: Fix MT7621 pinmux bits for uart3, uart2, mdio 
The MT7621 uses a 2 bit wide configuration of the sdhci, spi, mdio, pcie,
wdt, uart2 and uart3 in the GPIO_MODE register. It was correctly done
for sdhci, spi, pcie and wdt, The same has to be done for uart3, uart2
and mdio.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46645
 2015-08-17 06:15:49 +00:00
John Crispin
09851afd33 ramips: Fix amount of MT7621 pins controlled by spi group 
The PINS conntrolled by the SPI bits in the GPIO_MODE register is always
7 and not 8 for nand mode.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46644
 2015-08-17 06:15:44 +00:00
John Crispin
9ed654e389 ramips: Fix uart2/uart3 pinmux order on MT7621 
The uart3 setting in GPIO_MODE register is before the uart2 setting. Also
don't mix uart2 and uart3 function/groups.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46643
 2015-08-17 06:15:34 +00:00
Hauke Mehrtens
0b8643af4f kernel: update 3.18 to 3.18.20 
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46570
 2015-08-09 11:09:52 +00:00
John Crispin
351a55ac29 ramips: add CD polling to sd driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46475
 2015-07-24 09:12:10 +00:00
John Crispin
ebe957fad6 ramips: various mt7688 pinmux fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46474
 2015-07-24 09:12:02 +00:00
John Crispin
7449ea88db ramips: add clock strecthing support to i2c driver 
fixes #19816

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46472
 2015-07-24 09:11:42 +00:00
Jonas Gorski
901a7fa067 kernel: update 3.18 to 3.18.17 
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46150
 2015-06-30 23:26:09 +00:00
Rafał Miłecki
3cb077111a ramips: refresh patch with USB_MT7621_XHCI_PLATFORM 
Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46085
 2015-06-21 14:02:13 +00:00
John Crispin
765efbf10e ramips: fix a bug in the cevt code on mt7620 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46038
 2015-06-18 11:57:07 +00:00
Jonas Gorski
9a59b350b7 kernel: update 3.18 to 3.18.16 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
 2015-06-17 09:54:55 +00:00
Felix Fietkau
d7023e105f ramips: enable highmem support for mt7621 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45889
 2015-06-04 21:45:12 +00:00
Felix Fietkau
7a23eae245 ramips: remove prompt of the USB_MT7621_XHCI_PLATFORM symbol to avoid issues with kernel_menuconfig 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45888
 2015-06-04 21:45:01 +00:00
John Crispin
3f9999b44b ramips: dont set illacc to y by default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45795
 2015-05-27 20:06:06 +00:00
Jonas Gorski
caea19a3e0 ramips: fix hang on boot on rt305x 
Fix an upstream regression on 3.18+ that causes rt305x based devices
to hang on boot.

Fixes #19715.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45747
 2015-05-25 18:02:32 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
 2015-05-21 19:32:46 +00:00
Imre Kaloz
f86c07d8d4 The ability to read MAC addresses from MTD is useful for other targets besides ramips and lantiq as well. 
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45596
 2015-05-03 17:56:32 +00:00
John Crispin
03dd7b6bdb ralink: the systick clocksource was calculating a bad bogo mips value 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45554
 2015-04-21 12:42:42 +00:00
John Crispin
607a7a35be ralink: fix cevt-r4k hack 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45342
 2015-04-10 08:27:44 +00:00
John Crispin
ddb5ab2acf ralink: mt7621 add ECHI OCHI XCHI support 
Lets hope that this time it won't break the other ralink targets.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45067
 2015-03-27 19:07:29 +00:00
John Crispin
40d25d3eb5 ralink: drop xhci patch, it break !mt7621 builds 
will re-add it tomorrow after fixing it

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45028
 2015-03-26 16:24:19 +00:00
John Crispin
2cedb63d84 ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org> 
SVN-Revision: 45027
 2015-03-26 14:49:26 +00:00
John Crispin
0a9e38bb21 ralink: mt7621 add ECHI OCHI XCHI support 
The usb stroage not working since updated 3.18. Porting from MTK's source code.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45021
 2015-03-26 10:59:51 +00:00