Commit Graph

9656 Commits

Author SHA1 Message Date
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
That was based on assumptions.

SVN-Revision: 33310
2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
2012-08-29 10:37:54 +00:00
Gabor Juhos
02cb5f9dcd ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
SVN-Revision: 33308
2012-08-29 10:37:53 +00:00
Gabor Juhos
b0da5b73b8 ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
SVN-Revision: 33307
2012-08-29 10:37:51 +00:00
Gabor Juhos
54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
2012-08-29 10:37:47 +00:00
Gabor Juhos
bc4763a399 ramips: Power down phy on disabled switch ports
Power down phy on disabled switch ports.

Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.

[juhosg: fix checkpatch warning]

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33304
2012-08-29 10:37:45 +00:00
Gabor Juhos
1617f226a9 ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33303
2012-08-29 10:37:43 +00:00
Gabor Juhos
bb0785880a ramips: Rename POC registers
Rename POC registers.

The current code uses POC1-POC3.

The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2

So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33302
2012-08-29 10:37:41 +00:00
Gabor Juhos
f1b9d77912 ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301
2012-08-29 10:37:40 +00:00
Gabor Juhos
1f3400d3b4 ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.

The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33300
2012-08-29 10:37:38 +00:00
Gabor Juhos
3b17f1deb8 ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c

This patch adds swconfig support for ramips_esw:

Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.

The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33299
2012-08-29 10:37:36 +00:00
Gabor Juhos
358c7e47f2 ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.

Prepare for the main swconfig patch by cleaning up indentation a bit.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33298
2012-08-29 10:37:35 +00:00
Gabor Juhos
0c5688cc38 ar71xx: image: fix Profile name for TL-WA701 (closes #12094)
SVN-Revision: 33295
2012-08-29 10:37:30 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
2012-08-29 10:11:55 +00:00
Gabor Juhos
4405faae26 gemini: fix bus ids for PHY devices (closes: #12082)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33288
2012-08-27 18:09:57 +00:00
Gabor Juhos
f2030c3113 ar71xx: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33287
2012-08-27 14:55:38 +00:00
Gabor Juhos
d65c06c15c ar71xx: generate image for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33286
2012-08-27 14:55:37 +00:00
Gabor Juhos
4079f3163f ar71xx: sysupgrade for the ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33285
2012-08-27 14:55:36 +00:00
Gabor Juhos
abffa4ecfb ar71xx: rename all0258n.sh to allnet.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33284
2012-08-27 14:55:35 +00:00
Gabor Juhos
1d96b0275c ar71xx: detect ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33282
2012-08-27 14:55:32 +00:00
Gabor Juhos
eebdd633e4 ar71xx: add support for the Allnet ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33281
2012-08-27 14:55:31 +00:00
Gabor Juhos
cca873e8e0 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33280
2012-08-27 14:55:26 +00:00
Gabor Juhos
fccf1f5105 generic: add support for the EON EN25Q64 SPI flash chip
It is used in some TL-WDR4310 devices. Closes #12077.

SVN-Revision: 33275
2012-08-26 09:27:56 +00:00
Gabor Juhos
5a9c7fda3e ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.

The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.

Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:

for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
	| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
		grep -q ,$i, Makefile || echo $i;
done > missing-boards.new

Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33274
2012-08-26 08:15:11 +00:00
Gabor Juhos
f3d5edffdc ar71xx: image: fix TL-WR1043ND board id (#12079)
SVN-Revision: 33272
2012-08-26 06:30:37 +00:00
John Crispin
de3c3d7181 Enable eSATA sheevaplug
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.

Signed-off-by: Unai Uribarri <unaiur@gmail.com>

SVN-Revision: 33266
2012-08-24 06:15:06 +00:00
Gabor Juhos
773b33d7d2 ar71xx: image: group and sort {Single,Multi}Profiles
SVN-Revision: 33264
2012-08-23 13:17:47 +00:00
Gabor Juhos
a5e0eb0d95 ar71xx: image: group and sort mtdlayout definitions
SVN-Revision: 33263
2012-08-23 13:14:35 +00:00
Gabor Juhos
f0ad972aba ar71xx: image: use the MultiProfile helper for the Madwifi profile
SVN-Revision: 33262
2012-08-23 13:11:25 +00:00
Gabor Juhos
333f030b79 ar71xx: image: automatically build a list of SingleProfiles
Use that for Default/Minimal profiles.

SVN-Revision: 33261
2012-08-23 13:08:15 +00:00
Gabor Juhos
5dce77837f ar71xx: image: use the new helpers for the ZyXEL images
SVN-Revision: 33260
2012-08-23 13:05:05 +00:00
Gabor Juhos
be4be2d82a ar71xx: image: use the new helpers for the Zcomax images
SVN-Revision: 33259
2012-08-23 13:01:55 +00:00
Gabor Juhos
74bdb68ea4 ar71xx: image: use the new helpers for the WRT400 images
SVN-Revision: 33258
2012-08-23 12:58:45 +00:00
Gabor Juhos
8cf9a7b1c7 ar71xx: image: use the new helpers for the WZRHPG30XNH images
SVN-Revision: 33257
2012-08-23 12:55:35 +00:00
Gabor Juhos
c965d8ead8 ar71xx: image: use the new helpers for the WHRHPG300N images
SVN-Revision: 33256
2012-08-23 12:52:25 +00:00
Gabor Juhos
71af43a7c7 ar71xx: image: use the new helpers for the UBNTXM images
SVN-Revision: 33255
2012-08-23 12:49:15 +00:00
Gabor Juhos
097e9938b4 ar71xx: image: use the new helpers for the UBNT images
SVN-Revision: 33254
2012-08-23 12:46:06 +00:00
Gabor Juhos
216e9b7a92 ar71xx: image: use the new helpers for the TPLINKOLD images
SVN-Revision: 33253
2012-08-23 12:42:56 +00:00
Gabor Juhos
48d6081fa5 ar71xx: image: use the new helpers for the TPLINK-LZMA images
SVN-Revision: 33252
2012-08-23 12:39:46 +00:00
Gabor Juhos
8546e00157 ar71xx: image: use the new helpers for the TPLINK images
SVN-Revision: 33251
2012-08-23 12:36:35 +00:00
Gabor Juhos
27feea1070 ar71xx: image: use the new helpers for the Planex images
SVN-Revision: 33250
2012-08-23 12:33:25 +00:00
Gabor Juhos
4dbabe5c21 ar71xx: image: use the new helpers for the PB4X images
SVN-Revision: 33249
2012-08-23 12:30:15 +00:00
Gabor Juhos
bbaa0b9200 ar71xx: image: use the new helpers for the OpenMesh images
SVN-Revision: 33248
2012-08-23 12:27:06 +00:00
Gabor Juhos
4edc55f475 ar71xx: image: use the new helpers for the Netgear images
SVN-Revision: 33247
2012-08-23 12:23:56 +00:00
Gabor Juhos
d9f933b8b8 ar71xx: image: use the new helpers for the MyLoader images
SVN-Revision: 33246
2012-08-23 12:20:46 +00:00
Gabor Juhos
a409d0cf46 ar71xx: image: use the new helpers for the DIR825B1 images
SVN-Revision: 33245
2012-08-23 12:17:36 +00:00
Gabor Juhos
b7e05e3a59 ar71xx: image: use the new helpers for the CyberTAN images
SVN-Revision: 33244
2012-08-23 12:14:26 +00:00
Gabor Juhos
292f074ad7 ar71xx: image: use the new helpers for the Cameo933x images
SVN-Revision: 33243
2012-08-23 12:11:17 +00:00
Gabor Juhos
4c9a428614 ar71xx: image: use the new helpers for the Cameo913x images
SVN-Revision: 33242
2012-08-23 12:08:07 +00:00
Gabor Juhos
19d840980f ar71xx: image: use the new helpers for the Cameo7240 images
SVN-Revision: 33241
2012-08-23 12:04:57 +00:00
Gabor Juhos
ce91228e2b ar71xx: image: use the new helpers for the AthGzip images
SVN-Revision: 33240
2012-08-23 12:01:47 +00:00
Gabor Juhos
70e3dda99c ar71xx: image: use the new helpers for the AthLzma images
SVN-Revision: 33239
2012-08-23 11:58:37 +00:00
Gabor Juhos
31a88650d7 ar71xx: image: use the new helpers for the ALFA images
SVN-Revision: 33238
2012-08-23 11:55:27 +00:00
Gabor Juhos
2379e6f2a3 ar71xx: image: add a few helper functions
These functions will be used to simplify the Makefile.

SVN-Revision: 33237
2012-08-23 11:52:18 +00:00
Gabor Juhos
6ebc77af73 ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template
SVN-Revision: 33236
2012-08-23 11:49:07 +00:00
Hauke Mehrtens
847afa343f update profiles
* add profile for BCM4705 based SoC using tg3 instead of b44
* remove redundant 105-Atheros.mk
* reorder

SVN-Revision: 33235
2012-08-22 21:54:06 +00:00
Gabor Juhos
a2f82cf7ec ar71xx: add profile and build image for the TEW-712BR
SVN-Revision: 33234
2012-08-22 20:18:44 +00:00
Gabor Juhos
8744f8d183 ar71xx: TEW-712BR user space support
SVN-Revision: 33232
2012-08-22 20:12:24 +00:00
Gabor Juhos
8b3d95bba9 ar71xx: add support for the TRENDnet TEW-712BR board
SVN-Revision: 33231
2012-08-22 20:09:13 +00:00
Gabor Juhos
4073317695 ar71xx: fix serial clock calculation on AR933x
Closes #12031.

SVN-Revision: 33230
2012-08-22 19:11:10 +00:00
Gabor Juhos
cebaa557be ramips: fix board parameter for the NBG-419N (#12061)
SVN-Revision: 33229
2012-08-22 17:55:12 +00:00
John Crispin
3686b8d279 derive system from hostcc to allow building inside a chroot
SVN-Revision: 33228
2012-08-22 15:07:32 +00:00
Gabor Juhos
2811d6c183 ar71xx: fix comment style in mach-tl-wr2543n.c
SVN-Revision: 33227
2012-08-22 12:42:59 +00:00
Gabor Juhos
dc13dc1d54 ar71xx: fix mtd layout of the AP113
The 'mtdparts=' prefix and the name of the flash device is missing.

SVN-Revision: 33226
2012-08-22 12:39:46 +00:00
Gabor Juhos
eb54a05e89 ramips: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33225
2012-08-22 12:36:35 +00:00
Gabor Juhos
5a694e09c8 ar71xx: add ALL0305 board alias
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33224
2012-08-22 12:33:22 +00:00
Gabor Juhos
d77418d67e ramips: add RSSI leds for uci-defaults for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33220
2012-08-22 09:46:30 +00:00
Gabor Juhos
0517183b9c ar71xx: add support for TP-Link TL-WDR3600
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 33219
2012-08-22 09:43:18 +00:00
John Crispin
6c9d20d6e7 tools/firmware-utils/ptgen option to use MB rounding
SVN-Revision: 33218
2012-08-22 09:22:38 +00:00
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
2012-08-22 09:10:24 +00:00
Hauke Mehrtens
3133d4d8de remove unused file
SVN-Revision: 33210
2012-08-18 15:45:18 +00:00
Hauke Mehrtens
9eaee85cc2 make brcm47xx build only with bcma or only with ssb support.
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.

SVN-Revision: 33209
2012-08-18 14:08:35 +00:00
Hauke Mehrtens
f4d6baf498 update gpio patches
SVN-Revision: 33208
2012-08-18 11:51:35 +00:00
Gabor Juhos
67e6461ad7 ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
Gabor Juhos
89606b61b1 ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
Gabor Juhos
182a18a369 ar71xx: setup WLAN LED for the TL-WA901ND v2
Closes #11889.

SVN-Revision: 33202
2012-08-16 07:11:30 +00:00
Jo-Philipp Wich
a062e08bb4 use bundle-libraries.sh to install required host utilities into imagebuilder staging tree
SVN-Revision: 33196
2012-08-15 13:28:26 +00:00
Gabor Juhos
5d84dabf0f generic: extend pci_isable_usb_common_quirks patch
Fixes the following build error:
  SYSMAP  System.map
  Building modules, stage 2.
  MODPOST 48 modules
ERROR: "usb_enable_xhci_ports" [drivers/usb/host/ehci-hcd.ko] undefined!
ERROR: "usb_is_intel_switchable_xhci" [drivers/usb/host/ehci-hcd.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2

SVN-Revision: 33193
2012-08-15 13:26:51 +00:00
John Crispin
76954dc8b0 set xen images to gzip compression, fixes #11970
SVN-Revision: 33192
2012-08-15 09:20:12 +00:00
Florian Fainelli
a183ced08e MCS8140 actually selects CPU_ARM926T
Should make inclusion for other MCS814x SoCs easier

SVN-Revision: 33188
2012-08-14 16:19:30 +00:00
John Crispin
5f8ffb8873 fixes gpio_dev un/reload balancing
Signed-off-by: SHI Bin <shibin@ctsing.com>

SVN-Revision: 33183
2012-08-14 12:32:11 +00:00
Florian Fainelli
25792cb971 generic: enhanced image Makefile
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build)
* Got rid of unneccessary padding of rootfs partition
* ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage
* Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines)
* Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323
* Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols
* Size check of kernel files to avoid builds that break devices
* Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use

Signed-off by: Matthias Buecher <mail@maddes.net>

SVN-Revision: 33174
2012-08-13 14:46:47 +00:00
Gabor Juhos
5fc4b7f5fd ar71xx: uci-defaults/leds for ALL0258N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33165
2012-08-13 14:01:38 +00:00
Florian Fainelli
f164b71189 leds: do not register device if no leds defined
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33158
2012-08-13 09:55:10 +00:00
Florian Fainelli
f0f10014a0 BCM6358 fix enet MII clk definitions
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33157
2012-08-13 09:55:07 +00:00
Florian Fainelli
9b91c62917 nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33156
2012-08-13 09:55:04 +00:00
Gabor Juhos
82759a1716 ramips: rename rt3352 usb platform devices
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33145
2012-08-12 12:48:31 +00:00
Gabor Juhos
1525620b0e ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
Gabor Juhos
615a619bc7 ramips: provide means to specify custom "image name" for uImages, use for DIR-620
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33143
2012-08-12 12:48:26 +00:00
Gabor Juhos
9365113040 ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.

Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
Gabor Juhos
b942309f4f generic: use __meminit annotation for crashlog_init_memblock
Fixes this section mismatch warning:
WARNING: vmlinux.o(.meminit.text+0xb14): Section mismatch in reference
from the function memblock_insert_region() to the function
.init.text:crashlog_init_memblock()
The function __meminit memblock_insert_region() references
a function __init crashlog_init_memblock().
If crashlog_init_memblock is only used by memblock_insert_region then
annotate crashlog_init_memblock with a matching annotation.

Also, remove the __init annotations from 'include/linux/crashlog.h'

SVN-Revision: 33137
2012-08-12 10:30:41 +00:00
Florian Fainelli
2cf28cff7d only support 128KiB erase block sizes
SVN-Revision: 33131
2012-08-11 12:56:09 +00:00
Florian Fainelli
035b41bafb disable PCI support
None of the boards we support have PCI connectors

SVN-Revision: 33130
2012-08-11 12:56:00 +00:00
Florian Fainelli
639112f0d5 strip a bit more the kernel config
SVN-Revision: 33129
2012-08-11 12:55:51 +00:00
Florian Fainelli
0f91df4de6 properly advertise OHCI and EHCI capabilities
SVN-Revision: 33128
2012-08-11 12:55:41 +00:00
Florian Fainelli
43ddb1d7af change partition names to be more in line with other OpenWrt devices
SVN-Revision: 33127
2012-08-11 12:55:30 +00:00
Florian Fainelli
911a83dffc generate upgrade files suffixed with filesystem type
SVN-Revision: 33126
2012-08-11 12:55:15 +00:00
Florian Fainelli
c16bf519f1 nuport-mac: delay call to napi_start() until fully able to process RX
SVN-Revision: 33079
2012-08-10 07:04:21 +00:00
Florian Fainelli
0028429dfa set a compatible command-line to boot from flash
SVN-Revision: 33078
2012-08-10 07:04:16 +00:00
Gabor Juhos
5dd996bc2a generic: rtl8366_smi: increase delay after switch hw reset
SVN-Revision: 33077
2012-08-10 06:32:00 +00:00
Jo-Philipp Wich
c8a0166212 Fix hard reset of alix/soekris hardware under heavy NIC load
The following patch corrects a hard reset that occurs on alix and
soekris net5501 hardware. Specifically, this is an issue with the via
rhine NIC driver. Under periods of extreme load, the via rhine driver
can cause a reset of the entire system. When this happens no output is
seen on the console, the device simply reboots. This was reported in the
following ticket:

Consistent crash on Soekris NET5501
https://dev.openwrt.org/ticket/11882

I was able to reproduce the problem locally with numerous alix 2d13
platforms. Under heavy 64 byte frame size load from a Smartbits traffic
generator, the alix hardware will hard reset in under 5 minutes. The
same hardware, under the same load, on FreeBSD 9.0 does not reset.

The patch below backports most of the via rhine changes from kernel 3.5.
With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring
these changes in to avoid this serious issue.

I've tested this heavily in my test environment and was able to keep the
device stable under load for extended periods of time without any resets.

Also, a nice side effect of this change is that it significantly raises
the performance the platform. Without this patch the alix 2d13 can move
approximately 29,000 packets per second at 64 byte frame sizes. After
this patch the alix can move 52,000 packets per second at 64 byte frame
sizes.

I put this patch under the x86 patches as those are the only platforms
with via rhine hardware that I'm aware of. If it needs to go some place
else please let me know.

Thanks,
Adam

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 33072
2012-08-09 09:41:22 +00:00
Florian Fainelli
47380a4388 nuport-mac: use dma_mapping_error() instead of checking pointers
Thanks Gabor for spotting this

SVN-Revision: 33071
2012-08-09 09:06:35 +00:00
Florian Fainelli
7f9bfa3fcd nuport-mac: rework PHY interrupt configuration to avoid races
SVN-Revision: 33070
2012-08-08 21:51:18 +00:00
Florian Fainelli
5e877f02b4 nuport-mac: close possible race condition during start
SVN-Revision: 33069
2012-08-08 21:51:13 +00:00
Florian Fainelli
35351a28b9 nuport-mac: unmap the DMA buffer when closing device
SVN-Revision: 33068
2012-08-08 21:51:09 +00:00
Florian Fainelli
b77494fa2f nuport-mac: check dma_map_single address return values
SVN-Revision: 33067
2012-08-08 21:51:04 +00:00
Florian Fainelli
798cc28d73 build a Devolo dLAN USB Extender specific image
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.

SVN-Revision: 33066
2012-08-08 21:51:00 +00:00
Florian Fainelli
f8386ecbc6 cleanup image generation
SVN-Revision: 33065
2012-08-08 21:50:55 +00:00
John Crispin
64b385dda7 pci gpio mapping
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
2012-08-08 12:14:43 +00:00
Jonas Gorski
4feeda756e bcm63xx: fix USB base registers and IRQs for BCM6328
SVN-Revision: 33005
2012-08-05 23:18:22 +00:00
Hauke Mehrtens
a0fb060211 update tg3 driver
SVN-Revision: 33004
2012-08-05 20:27:40 +00:00
Hauke Mehrtens
35661401da generate image for Linksys e3200
SVN-Revision: 33003
2012-08-05 13:14:00 +00:00
Hauke Mehrtens
a71f347c30 brcm47xx: update gpio patch
SVN-Revision: 33001
2012-08-05 12:40:05 +00:00
Hauke Mehrtens
1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code
SVN-Revision: 33000
2012-08-05 12:39:15 +00:00
John Crispin
5f438c3565 W502V/ARV4525 wireless mac bugfix
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
2012-08-04 20:14:52 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
SVN-Revision: 32992
2012-08-04 19:46:25 +00:00
John Crispin
060b161ca6 cleanup patches
SVN-Revision: 32953
2012-08-03 08:53:02 +00:00
Florian Fainelli
162e272b4b nuport-mac: properly protect the phy interrupt handler
SVN-Revision: 32951
2012-08-02 18:13:17 +00:00
John Crispin
f45132d1d4 Codel: avoid a nul rec_inv_sqrt
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 32950
2012-08-02 13:39:50 +00:00
John Crispin
c2d3274ffc fixes i2c clock enable
SVN-Revision: 32949
2012-08-02 13:29:49 +00:00
Gabor Juhos
e320a7e649 ar71xx: simplify misc IRQ handling
SVN-Revision: 32948
2012-08-02 11:25:49 +00:00
Gabor Juhos
3e1e52a524 ar71xx: fix AR934X_EHCI_SIZE
SVN-Revision: 32947
2012-08-02 11:25:46 +00:00
Gabor Juhos
b873051706 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
SVN-Revision: 32946
2012-08-02 09:54:41 +00:00
Gabor Juhos
e29d6bec6f ar71xx: image: allow to use board specific code in the lzma-loader
SVN-Revision: 32945
2012-08-02 09:54:33 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board
SVN-Revision: 32944
2012-08-02 09:54:28 +00:00
Gabor Juhos
e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
2012-08-02 09:54:21 +00:00
Gabor Juhos
614ca3cc9e generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls
SVN-Revision: 32942
2012-08-02 09:54:13 +00:00
Florian Fainelli
9f011e7225 add missing netmask to the network config
SVN-Revision: 32941
2012-08-01 22:09:13 +00:00
Florian Fainelli
5133a44785 assume the link is up and full-duplex by default
SVN-Revision: 32940
2012-08-01 21:56:54 +00:00
Florian Fainelli
56aac45139 add a default and suitable network config file
SVN-Revision: 32939
2012-08-01 21:56:49 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b ar71xx: ew-dorin: added USB support
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
2012-08-01 12:24:52 +00:00
Florian Fainelli
df48d71d72 resync defconfig enable XZ compression
SVN-Revision: 32930
2012-08-01 12:01:27 +00:00
Florian Fainelli
3cd753408d properly generate squashfs, jffs2 and initramfs images and kernels
SVN-Revision: 32927
2012-07-31 23:09:50 +00:00
Florian Fainelli
c0561a42e7 disable crashlog on ARM platforms for the moment
It is currently badly broken on ARM, until fixed, disable it

SVN-Revision: 32926
2012-07-31 23:09:46 +00:00
John Crispin
f5f36911f0 add lantiq svip support
SVN-Revision: 32925
2012-07-31 18:49:54 +00:00
Jonas Gorski
07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards)
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
2012-07-31 14:27:47 +00:00
Jonas Gorski
820c224029 bcm63xx: add basic bcm6362 support
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
2012-07-31 14:27:42 +00:00
Jonas Gorski
dcd339ac9d bcm63xx: enable usb for bcm6328
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
2012-07-31 14:27:34 +00:00
Jonas Gorski
94d257a851 bcm63xx: update enetswitch driver
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a bcm63xx: reorder patches
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
2012-07-31 14:27:25 +00:00
Florian Fainelli
d1ab4df0d6 move i2c module to target modules.mk
SVN-Revision: 32910
2012-07-29 13:20:51 +00:00
Florian Fainelli
a5738c960a resync config
SVN-Revision: 32908
2012-07-29 13:20:39 +00:00
Florian Fainelli
17244dea00 use the same description as other omap platforms (without the dash)
SVN-Revision: 32907
2012-07-29 13:20:35 +00:00
John Crispin
ee0946a5f4 refresh pwm patch
SVN-Revision: 32905
2012-07-29 11:53:06 +00:00
John Crispin
101766fb00 clean up pwm patches and drivers
SVN-Revision: 32901
2012-07-28 20:47:08 +00:00
Hauke Mehrtens
f0fe59648a add config option CONFIG_I2C_MV64XXX to fix kirkwood build
SVN-Revision: 32898
2012-07-28 11:36:52 +00:00
Florian Fainelli
67891c26ec resync config
SVN-Revision: 32895
2012-07-27 15:35:15 +00:00
Florian Fainelli
a4d699ccf0 fix DVA-G3810BN image generation
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3 add D-link DVA-G3810BN-TL-1 support
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2 Add CT6376-1 board support
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
2012-07-27 15:35:05 +00:00
Florian Fainelli
4acdbb1d87 Add brcmsmac profile
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
2012-07-27 15:34:57 +00:00
John Crispin
0ba7b18cfd Add leds back after migration to sysfs
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

SVN-Revision: 32885
2012-07-26 17:06:55 +00:00
Florian Fainelli
46611b2cbf add more missing config symbols
SVN-Revision: 32884
2012-07-26 17:03:08 +00:00
Florian Fainelli
ac30beaaa7 add more USB-related config symbols
SVN-Revision: 32883
2012-07-26 17:03:05 +00:00
Florian Fainelli
a077e785cf make sure target modules depend on the target
SVN-Revision: 32882
2012-07-26 17:03:02 +00:00
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
2012-07-26 15:42:18 +00:00
John Crispin
87a72d68f1 fix typo in modules.mk
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
2012-07-25 19:52:30 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
SVN-Revision: 32869
2012-07-25 19:36:19 +00:00
Florian Fainelli
adc2b21be8 move isp116x driver to target specific modules.mk
SVN-Revision: 32865
2012-07-25 15:50:45 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk
SVN-Revision: 32863
2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk
SVN-Revision: 32862
2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk
SVN-Revision: 32861
2012-07-25 15:50:33 +00:00
Florian Fainelli
3b5a8548f4 move mmc driver to target specific modules.mk
SVN-Revision: 32859
2012-07-25 15:50:26 +00:00
Florian Fainelli
18038c803c move ixp4xx-eth to target specific modules.mk
SVN-Revision: 32858
2012-07-25 15:50:23 +00:00
Florian Fainelli
4000de357e move crypto module to target specific modules.mk
SVN-Revision: 32856
2012-07-25 15:50:16 +00:00
Florian Fainelli
a282e37c09 move i2c driver to target modules.mk
SVN-Revision: 32855
2012-07-25 15:50:13 +00:00
Florian Fainelli
accbc20045 move watchdog driver to target specific modules.mk
SVN-Revision: 32854
2012-07-25 15:50:10 +00:00
Florian Fainelli
23ffbad602 move target specific spi modules
SVN-Revision: 32853
2012-07-25 15:50:04 +00:00
Florian Fainelli
1859500829 move target specific leds modules to ar71xx modules.mk
SVN-Revision: 32852
2012-07-25 15:50:02 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk
SVN-Revision: 32851
2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk
SVN-Revision: 32850
2012-07-25 15:49:54 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk
SVN-Revision: 32848
2012-07-25 15:49:49 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk
SVN-Revision: 32846
2012-07-25 15:49:42 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.
SVN-Revision: 32845
2012-07-25 14:52:00 +00:00
Florian Fainelli
ab2cb9ce61 add yet another framebuffer symbol
SVN-Revision: 32844
2012-07-25 14:01:57 +00:00
Florian Fainelli
89a312bf48 split framebuffer helper modules to their own packages
SVN-Revision: 32843
2012-07-25 14:01:54 +00:00
Florian Fainelli
ba9f6a46b1 remove broken flag
SVN-Revision: 32842
2012-07-25 14:01:51 +00:00
Florian Fainelli
03c06178e3 package buttons driver separately
SVN-Revision: 32841
2012-07-25 14:01:49 +00:00
Florian Fainelli
83b7462ac9 package cobalt lcd as a module
SVN-Revision: 32840
2012-07-25 14:01:46 +00:00
John Crispin
7ee4798be2 add unset CONFIG_FB_XGI to fix fullbuilds
SVN-Revision: 32836
2012-07-25 09:05:23 +00:00
John Crispin
94a550cc87 cleanup config-3.3, remove =m
SVN-Revision: 32835
2012-07-25 09:05:18 +00:00
John Crispin
1cbfa0c0f5 laguna: fix eeprom read buffer size during platform configuration
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>

SVN-Revision: 32833
2012-07-25 08:01:38 +00:00
John Crispin
0e9e7dcd10 adds target used by rapsberry pi
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
2012-07-24 20:38:43 +00:00
John Crispin
b891eec700 MI424WR - add rev D support
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

SVN-Revision: 32820
2012-07-24 20:38:36 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
2012-07-24 20:37:50 +00:00
Florian Fainelli
93dc8c8d1b move omap specific modules to modules.mk
SVN-Revision: 32810
2012-07-24 19:43:54 +00:00
Florian Fainelli
82c7e05d42 move n810 battery module to omap24 modules.mk
SVN-Revision: 32809
2012-07-24 19:43:49 +00:00
Florian Fainelli
25e20b0b57 move target specific modules to target's module.mk
SVN-Revision: 32808
2012-07-24 19:43:45 +00:00
Florian Fainelli
587f85ac20 package ep93xx framebuffer
SVN-Revision: 32807
2012-07-24 19:43:35 +00:00
Florian Fainelli
5915c85d80 remove crypto symbols override
SVN-Revision: 32806
2012-07-24 19:43:31 +00:00
Florian Fainelli
c238862651 add missing framebuffer related symbols
SVN-Revision: 32804
2012-07-24 19:43:23 +00:00
Florian Fainelli
9f55e6f954 remove broken flag, since it works
SVN-Revision: 32803
2012-07-24 19:43:19 +00:00
Florian Fainelli
c531ce0301 fix sound modules loading order and dependencies
SVN-Revision: 32802
2012-07-24 19:43:15 +00:00
Florian Fainelli
598ef2a2e0 package ep93xx touchscreen driver as a module
SVN-Revision: 32799
2012-07-24 19:42:49 +00:00
Florian Fainelli
0db5f35846 set DEVICE_TYPE to developerboard
SVN-Revision: 32798
2012-07-24 19:42:44 +00:00
John Crispin
5178c177dc rebase config-3.3
SVN-Revision: 32797
2012-07-24 17:28:25 +00:00
John Crispin
53a6946bb4 fix tantos patch properly
SVN-Revision: 32796
2012-07-24 17:28:12 +00:00
John Crispin
6fe32d72a2 make tantos switch select ETHERNET_PACKET_MANGLE
SVN-Revision: 32795
2012-07-24 16:50:14 +00:00
John Crispin
48869ef7c0 move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
This broke falcon builds

SVN-Revision: 32794
2012-07-24 15:33:01 +00:00
Felix Fietkau
b59bc92c6e crashlog: fix dependency, add memblock support
SVN-Revision: 32787
2012-07-22 16:39:33 +00:00
Felix Fietkau
b1f318de53 kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x
SVN-Revision: 32783
2012-07-20 12:28:50 +00:00
Florian Fainelli
05340cc602 rename upgrade image to sysupgrade.bin for consistency
SVN-Revision: 32770
2012-07-17 16:47:57 +00:00
Florian Fainelli
d243c1e1f2 add missing configuration symbols
SVN-Revision: 32769
2012-07-17 16:40:28 +00:00
Florian Fainelli
f7dfd20f97 au1000: implement sysupgrade platform.sh
Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32768
2012-07-17 16:40:24 +00:00
Florian Fainelli
ac6bf6d62f au1000: clean up profiles
Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32767
2012-07-17 16:39:52 +00:00
Florian Fainelli
b2d76e1e05 au1000: fix InternetBox idsel and remove broken flag
The following patch is necessary for the InternetBox (Surfbox) board-specific
idsel to work with newer kernels. Acutally I don't exactly understand why this
was not necessary before, but without the udelay, the MiniPCI adapter in slot 3
is not detected and set up correctly.

Also remove platform broken flag, it works.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32766
2012-07-17 16:39:47 +00:00
Gabor Juhos
21de1b9d85 ar71xx: enable I2C_GPIO, the PB44 board needs that
SVN-Revision: 32738
2012-07-15 17:52:52 +00:00
Gabor Juhos
7daf851adf ar71xx: fix PB44 board detection
SVN-Revision: 32737
2012-07-15 17:52:50 +00:00
Gabor Juhos
c7fa38484c ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi
SVN-Revision: 32736
2012-07-15 17:52:48 +00:00
Luka Perkov
03a6d65c37 kernel: add Marvell SoC built-in RTC to modules
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32732
2012-07-15 14:25:30 +00:00
Florian Fainelli
c727c2aacf set DEVICE_TYPE to other to avoid pulling unecessary packages
SVN-Revision: 32731
2012-07-15 14:10:03 +00:00
Florian Fainelli
a5d72815b5 add compatible property to pci node
SVN-Revision: 32730
2012-07-15 14:09:40 +00:00
Florian Fainelli
b5578d83d5 use ohci_err() instead of err()
SVN-Revision: 32729
2012-07-15 14:09:32 +00:00
Florian Fainelli
0e0b396663 make sure we properly unmap DMA mappings we created
SVN-Revision: 32728
2012-07-15 14:09:24 +00:00
Florian Fainelli
0f0e42f28e nuport-mac: add definitions of the various bits/masks used
SVN-Revision: 32727
2012-07-15 14:09:18 +00:00
Luka Perkov
c89e87d186 kirkwood: add support for seagate goflexnet and goflexhome
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32725
2012-07-15 12:18:29 +00:00
Luka Perkov
952ce3473d kirkwood: revert config changes from r32053
SVN-Revision: 32719
2012-07-15 00:08:52 +00:00
Gabor Juhos
33220828dc ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:

TL-WDR4300:
00000040  43 00 00 01 00 00 00 01  00 00 00 00 76 fb 83 40  |C...........v..@|

TL-WDR4310:
00000040  43 10 00 01 00 00 00 01  00 00 00 00 38 2b 50 6c  |C...........8+Pl|

[juhosg: change commit message, use a different model name]

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

SVN-Revision: 32683
2012-07-12 13:38:40 +00:00
Gabor Juhos
372945185d ramips: rt305x: add support for Edimax 3G-6200N
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

SVN-Revision: 32682
2012-07-12 13:29:46 +00:00
Gabor Juhos
e9af340016 generic: ocf: restore terminating entry of pci_id_table in hifnHIPP
SVN-Revision: 32680
2012-07-12 08:34:23 +00:00
Gabor Juhos
d3c8852fd1 ar71xx: select ATH79_DEV_M25P80 for the WRT400N board
SVN-Revision: 32679
2012-07-12 08:34:22 +00:00
Gabor Juhos
c75c895d24 ar71xx: airrouter power led support
This patch adds support for power led to Unifi Airrouter AP.

[juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32678
2012-07-12 08:34:21 +00:00
Gabor Juhos
466f010303 ar71xx: unifi reset button support
This patch adds support for reset button to Ubiquiti UniFi AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32677
2012-07-12 08:34:20 +00:00
Gabor Juhos
5ce9c90ca8 ar71xx: airrouter reset button support
This patch adds support for reset button to Ubiquiti Airrouter AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32676
2012-07-12 08:34:18 +00:00
Luka Perkov
283021ac15 ocf: update to version 20120127
SVN-Revision: 32672
2012-07-11 23:38:14 +00:00
Hauke Mehrtens
45d55161a6 kernel: bcma: update to version from wireless-testing tag master-2012-07-11
SVN-Revision: 32670
2012-07-11 22:17:05 +00:00
Florian Fainelli
b94d9eb302 remove bcm63xx_pci_register() call in livebox board
SVN-Revision: 32661
2012-07-11 09:15:26 +00:00
Florian Fainelli
f8446c3d4c use physmap-flash on livebox (#8677)
SVN-Revision: 32660
2012-07-11 09:15:22 +00:00
Florian Fainelli
8765e49fbe nuport-mac: check netif_receive_skb() return value
We did not reassign status to netif_receive_skb() return value, we thus
almost always incremented the dropped counter because the descriptor status
value never matches the NET_RX_DROP.

SVN-Revision: 32659
2012-07-11 08:29:01 +00:00
Florian Fainelli
93bf00ff36 fix typo on of_node_put()
SVN-Revision: 32653
2012-07-09 14:44:15 +00:00
Florian Fainelli
bb1488e5e7 Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32643
2012-07-06 22:10:37 +00:00
Gabor Juhos
fe015f399f ar71xx: swizzle address for PCI byte/word access on AR71xx
Closes #11683.

SVN-Revision: 32639
2012-07-06 16:33:12 +00:00
Gabor Juhos
b39df5bb81 ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board
SVN-Revision: 32638
2012-07-06 11:12:02 +00:00
Gabor Juhos
e258367c19 ar71xx: merge new board patches into the generic patch
SVN-Revision: 32637
2012-07-06 11:12:01 +00:00
Gabor Juhos
b020a7e7c3 ar71xx: OM2P LC sysupgrade patch
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32635
2012-07-06 11:11:58 +00:00
Florian Fainelli
110fd3525a call of_node_put() on ethernet node
SVN-Revision: 32628
2012-07-05 18:46:55 +00:00
Florian Fainelli
a8fab2cb78 fix EPHY clock bit definition after r32489
SVN-Revision: 32627
2012-07-05 18:46:52 +00:00
Florian Fainelli
81681d7367 give an unique partition identifier for dLAN USB Extender Combined partition
SVN-Revision: 32626
2012-07-05 18:46:48 +00:00
Gabor Juhos
eabf96dc22 ar71xx: set firmware version for the TL-WR2543N
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.

SVN-Revision: 32617
2012-07-05 16:25:31 +00:00
Gabor Juhos
7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
2012-07-05 16:25:26 +00:00
Gabor Juhos
b2f0476871 ar71xx: OM2P sysupgrade support
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32613
2012-07-05 08:26:57 +00:00
Gabor Juhos
797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
2012-07-05 08:26:53 +00:00
Gabor Juhos
1ea2a3cfd8 ar71xx: add profile and build image for the Atheros AP136 reference board
SVN-Revision: 32609
2012-07-05 08:26:51 +00:00
Gabor Juhos
b219848bfc ar71xx: AP136 user-space support
SVN-Revision: 32608
2012-07-05 08:26:50 +00:00
Gabor Juhos
f0cda65bb6 ar71xx: add initial support for the Qualcomm Atheros AP136 board
SVN-Revision: 32607
2012-07-05 08:26:48 +00:00
Gabor Juhos
d1b237b335 ar71xx: add initial support for the QCA955X SoCs
SVN-Revision: 32606
2012-07-05 08:26:47 +00:00
Gabor Juhos
7284cf73d6 ar71xx: refactor PCI code to allow registering multiple PCI controllers
SVN-Revision: 32605
2012-07-05 08:26:45 +00:00
Gabor Juhos
6b8392eb12 generic: ar8216: start aneg on each PHY of the AR8327
SVN-Revision: 32604
2012-07-05 08:26:39 +00:00
Florian Fainelli
0fdac1102d add missing interrupts properties to some device nodes
SVN-Revision: 32603
2012-07-04 19:37:11 +00:00
Felix Fietkau
bfef2d17eb ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW)
SVN-Revision: 32599
2012-07-04 10:55:56 +00:00
Jonas Gorski
0a3e9c3148 bcm63xx: bcm63xx-spi does not depend on spi-bitbang
SVN-Revision: 32594
2012-07-03 21:42:17 +00:00
Jonas Gorski
fad888a85c bcm63xx: 96348A-122 improvements (Comtrend 5365)
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32593
2012-07-03 21:42:15 +00:00
Jonas Gorski
0c7e676342 bcm63xx: fix second caldata address calculation
thanks Noltari for spotting this.

SVN-Revision: 32592
2012-07-03 21:42:12 +00:00
Jonas Gorski
988147111c bcm63xx: update patches to latest upstream versions
SVN-Revision: 32591
2012-07-03 21:42:07 +00:00
Jonas Gorski
1e2262df76 kernel: generic: spi: allow empty (un)prepare transfer
SVN-Revision: 32590
2012-07-03 21:42:03 +00:00
Gabor Juhos
b8618fd3f2 ar71xx: improve MDIO busy wait code
SVN-Revision: 32586
2012-07-03 15:24:02 +00:00
Gabor Juhos
86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
2012-07-03 15:24:01 +00:00
Florian Fainelli
4cdc4b1f36 refresh patches
SVN-Revision: 32581
2012-07-03 09:45:46 +00:00
Hauke Mehrtens
bd9fa13c73 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02
SVN-Revision: 32580
2012-07-02 23:12:58 +00:00
Florian Fainelli
52bae2d2bd fix watchdog and rng drivers section mismatch (#11767)
SVN-Revision: 32522
2012-06-29 09:07:54 +00:00
Felix Fietkau
5570b76642 ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762)
SVN-Revision: 32520
2012-06-28 16:05:08 +00:00
Felix Fietkau
a5c684de26 kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht)
Despite Westwood's theoretical advantages, in nearly
every benchmark we ran last year, TCP cubic won, whether it be
on correct RTT estimates, amount of buffering, responsiveness,
etc. on current hardware and software designs.

(both need timestamps on to work well, besides)

TCP cubic is better maintained and understood than westwood,
also.

While a scenario where westwood would win possibly exists,
there is too much buffering in the wifi stack in particular
at present, to see any improvement.

If you wish to exercise various TCPs under contention,
the current svn head of netperf (2.6) has options to switch
congestion control agorithms on the fly, as does iperf.

SVN-Revision: 32514
2012-06-27 22:32:47 +00:00
Florian Fainelli
1d7878a38b fix SPI clock frequency selection
SVN-Revision: 32512
2012-06-27 22:14:50 +00:00
Felix Fietkau
41909c6568 kernel: add missing config symbol
SVN-Revision: 32498
2012-06-24 20:21:27 +00:00
Vasilis Tsiligiannis
eee358338c ramips: mac address detection for Fonera 2.0n
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

SVN-Revision: 32490
2012-06-23 13:58:29 +00:00
Florian Fainelli
81e8757da4 provide an early ioremap cookie of the system configuration register
SVN-Revision: 32489
2012-06-23 11:03:50 +00:00
Florian Fainelli
98b2bc9189 group SYSDBG register defines in mcs814x.h
SVN-Revision: 32488
2012-06-23 11:03:45 +00:00
Florian Fainelli
a8965f0005 make hardware.h a forward inclusion of mcs814x.h
mach/hardware.h is soon to be removed by upstream kernel

SVN-Revision: 32487
2012-06-23 11:03:40 +00:00
Florian Fainelli
7c984552ed remove platform specific initialization from ethernet driver
Hardware filtering must always be enabled as long as there is an Ethernet
device registered, and use device tree for setting the link activity and
buffer shifting enable/disable bit.

SVN-Revision: 32486
2012-06-23 11:03:35 +00:00
Florian Fainelli
2c47bbc199 regroup interrupt controller register definitions in hardware.h
SVN-Revision: 32485
2012-06-23 11:03:29 +00:00
Florian Fainelli
481c9faf20 remove handle_irq callback in board-mcs8140-dt.c
This should have been removed in r32470.

SVN-Revision: 32481
2012-06-21 12:20:47 +00:00
Florian Fainelli
4b33e0996e fix USB led triggers
SVN-Revision: 32474
2012-06-20 21:58:00 +00:00
Florian Fainelli
a98c74164e use generic uci defaults functions
SVN-Revision: 32473
2012-06-20 21:57:56 +00:00
Florian Fainelli
007fa4d638 remove uselss cache invalidations
SVN-Revision: 32472
2012-06-20 21:57:53 +00:00
Florian Fainelli
9a2367aa6d improve ethernet driver debugging
SVN-Revision: 32471
2012-06-20 21:57:49 +00:00
Florian Fainelli
3b0dba382b do not use MULTI_IRQ_HANDLER it is bogus on our platform
This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.

SVN-Revision: 32470
2012-06-20 21:57:45 +00:00
Mirko Vogt
f45cd30543 verified to work - remove broken flag
SVN-Revision: 32469
2012-06-20 19:04:35 +00:00
Vasilis Tsiligiannis
1978c07539 Fix sysupgrade for squashfs, jffs2 and ext4 images
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

SVN-Revision: 32465
2012-06-19 22:36:53 +00:00
Florian Fainelli
f4afa00862 add Moschip MSC814x support
This target currently only supports Moschip's MCS8140 SoC, but support
for other chips in the same family (MCS8142, MCS8144) will be easy to add.

Target support is entirely using Device Tree for probing peripherals.
Drivers support include:
- PCI
- USB 1 & 2
- watchdog
- random number generator
- UART
- timer
- internal Ethernet PHY
- Ethernet MAC core

Support for the following boards is included using Device Tree
- Devolo dLAN USB Extender
- Tigal RBT-832

SVN-Revision: 32462
2012-06-19 14:48:56 +00:00
Gabor Juhos
7c87391c55 ar71xx: create profile and build image for the TL-WDR4300 board
SVN-Revision: 32461
2012-06-19 11:51:20 +00:00
Gabor Juhos
2d97a52045 ar71xx: add user space support for the TL-WDR4300
SVN-Revision: 32460
2012-06-19 11:51:18 +00:00
Gabor Juhos
8b9931fd27 ar71xx: add support for the TL-WDR4300 board
SVN-Revision: 32459
2012-06-19 11:51:17 +00:00
Gabor Juhos
e6a10d5cdd ar71xx: refresh patches
SVN-Revision: 32458
2012-06-19 11:51:15 +00:00
Gabor Juhos
86c6543259 ar71xx: make AR8327 LEDs working on the DB120 board
SVN-Revision: 32457
2012-06-19 10:44:17 +00:00
Gabor Juhos
b934fa2f16 generic: ar8216: allow to configure AR8327 LEDs via platform data
SVN-Revision: 32456
2012-06-19 10:44:16 +00:00
Gabor Juhos
f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h
SVN-Revision: 32455
2012-06-19 10:13:43 +00:00
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs
SVN-Revision: 32454
2012-06-19 10:13:41 +00:00
Gabor Juhos
27fea0b6d7 ar71xx: correctly detect NETGEAR WNDRMAC
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32453
2012-06-19 10:13:38 +00:00
Gabor Juhos
ee9bc123fb ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32452
2012-06-19 10:13:37 +00:00
Gabor Juhos
833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
2012-06-19 09:52:15 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
SVN-Revision: 32447
2012-06-19 00:22:04 +00:00
Felix Fietkau
5d364d0ca1 ar71xx: add support for reading the MAC address from OTP ROM on AR933x
SVN-Revision: 32446
2012-06-19 00:21:58 +00:00
Jo-Philipp Wich
f06473f8ff optimize kernel config for kvm_guest
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 32436
2012-06-18 23:36:50 +00:00
Jo-Philipp Wich
cbac321164 remove inittab override
SVN-Revision: 32422
2012-06-18 11:50:37 +00:00
Florian Fainelli
b89c81929e fix SPI message control handling for BCM6338/6348
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

SVN-Revision: 32409
2012-06-17 16:17:29 +00:00
Felix Fietkau
50958f5e03 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

SVN-Revision: 32395
2012-06-16 21:06:33 +00:00
Florian Fainelli
b391548cf0 remove broken flags
Thanks to Nicolas Le Falher for testing on Bifferboard.

SVN-Revision: 32389
2012-06-16 16:45:28 +00:00
Jo-Philipp Wich
e3663ff907 use ttyS0 @ 115200 baud as default for KVM guests
SVN-Revision: 32384
2012-06-15 12:59:49 +00:00
Luka Perkov
1c80d9f21d kirkwood: fix typo in uci-defaults/leds
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32343
2012-06-13 18:41:42 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection
SVN-Revision: 32336
2012-06-13 12:54:22 +00:00
Jonas Gorski
f2271efc4e bcm63xx: readd accidentially dropped ignore_oc in ehci driver
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

SVN-Revision: 32221
2012-06-11 22:24:58 +00:00
Felix Fietkau
7cb42738e6 package/index: filter out the libc package from the index
SVN-Revision: 32187
2012-06-11 01:29:11 +00:00
Luka Perkov
be5229f0ba kirkwood: ib62x0 fix reboot
SVN-Revision: 32131
2012-06-08 23:17:46 +00:00
Felix Fietkau
43b5706ef5 xburst: remove an obsolete CompareKernelPatchVer call
SVN-Revision: 32115
2012-06-07 16:32:44 +00:00
Florian Fainelli
6e5242952c fix 553-board_96348w3.patch patch wrt gpio-keys-polled
SVN-Revision: 32096
2012-06-06 20:58:45 +00:00
Felix Fietkau
624505df56 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
SVN-Revision: 32095
2012-06-06 19:37:49 +00:00
Felix Fietkau
8b46a72583 kernel: add a few more tracing related symbols
SVN-Revision: 32094
2012-06-06 18:04:00 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572)
SVN-Revision: 32093
2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x
SVN-Revision: 32092
2012-06-06 17:24:09 +00:00
Felix Fietkau
072bed4760 target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install
SVN-Revision: 32091
2012-06-06 17:24:05 +00:00
Felix Fietkau
02ab0d3ef9 ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
SVN-Revision: 32090
2012-06-06 17:24:01 +00:00
Florian Fainelli
4c25e42fa8 fix alarm led color for board 96348A-122
SVN-Revision: 32089
2012-06-06 16:07:46 +00:00
Florian Fainelli
2f63f097de add 96348w3 board (#10764)
SVN-Revision: 32088
2012-06-06 15:45:04 +00:00
Florian Fainelli
9d38989d1f update livebox board support (#8677)
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

SVN-Revision: 32087
2012-06-06 15:44:56 +00:00
Florian Fainelli
c69a2cdfbb fix leds naming for all bcm63xx boards
SVN-Revision: 32086
2012-06-06 15:44:52 +00:00
Felix Fietkau
ce1d4d7ee9 kernel: make tracing support configurable
SVN-Revision: 32085
2012-06-06 15:25:57 +00:00
Florian Fainelli
23fc737b9d backport upstream spi-bcm63xx fixes
* message pump conversion
* not using stopping state
* setting spi driver mode bits

SVN-Revision: 32078
2012-06-06 13:31:33 +00:00
Florian Fainelli
7b12e9e49c backport spi message queue infrastructure
SVN-Revision: 32077
2012-06-06 13:31:30 +00:00
Florian Fainelli
4112094dbb increase led number in patch 301-led_count.patch
So that board patches are only touching board-related code

SVN-Revision: 32076
2012-06-06 13:31:24 +00:00
John Crispin
95e69ac4f1 clean up generic image building
SVN-Revision: 32065
2012-06-05 17:49:42 +00:00
Florian Fainelli
9a61b249c5 fix board patches so that new boards are withing appropriate ifdef
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

SVN-Revision: 32060
2012-06-05 13:40:41 +00:00
Florian Fainelli
5ec2209734 refresh generic patches
SVN-Revision: 32059
2012-06-05 13:40:38 +00:00
Florian Fainelli
36c99bcc42 fix bisectability of patch 303-spi-board-info.patch
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

SVN-Revision: 32058
2012-06-05 13:40:35 +00:00
John Crispin
a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Luka Perkov
605012ad5d kirkwood: reorganize target
SVN-Revision: 32053
2012-06-05 00:43:56 +00:00
Luka Perkov
7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
Jonas Gorski
ffea8eb913 bcm63xx: fix ethernet on 96328avng and 963281TAN
The internal switch did not get registered.

SVN-Revision: 32041
2012-06-04 08:35:25 +00:00
John Crispin
2b4ef2eafa adds unset Kbuild symbol
SVN-Revision: 32026
2012-06-02 14:03:32 +00:00
Gabor Juhos
f4b02b91ce malta: remove 3.2 patches
SVN-Revision: 32023
2012-06-02 12:06:28 +00:00
Gabor Juhos
c0c60f7bd3 malta: use common kernel config
SVN-Revision: 32022
2012-06-02 12:06:26 +00:00
Gabor Juhos
9375e83586 xburst: add missing config symbol
SVN-Revision: 32021
2012-06-02 12:06:15 +00:00
John Crispin
76e4cd2a24 add $(SUBTARGET) to the filename if available
SVN-Revision: 32007
2012-05-30 18:04:15 +00:00
John Crispin
47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again
SVN-Revision: 32006
2012-05-30 17:41:28 +00:00
Jonas Gorski
3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
Jonas Gorski
c454ba3657 bcm63xx: readd accidentially dropped network config for SPW303V
SVN-Revision: 32003
2012-05-30 10:27:42 +00:00
Gabor Juhos
9e02593b70 generic: ar8216: add revision specific PHY fixups for AR8327
SVN-Revision: 32000
2012-05-29 16:39:27 +00:00
Gabor Juhos
0d241e6670 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv
SVN-Revision: 31999
2012-05-29 16:39:26 +00:00
Gabor Juhos
b2fce19a70 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers
SVN-Revision: 31998
2012-05-29 16:39:24 +00:00
Gabor Juhos
cd7ab1d30b ar71xx: add default LED setup for the DB120 board
SVN-Revision: 31997
2012-05-29 16:39:23 +00:00
Gabor Juhos
29a579e43a cns21xx: use the generic uci-default functions for initial LED setup
SVN-Revision: 31996
2012-05-29 16:39:22 +00:00
Gabor Juhos
ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
Gabor Juhos
c81c6516de kirkwood: use the generic uci-default functions for initial LED setup
SVN-Revision: 31994
2012-05-29 16:39:20 +00:00
Gabor Juhos
ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
Gabor Juhos
4e40bdc190 ar71xx: use the generic uci-default functions for initial LED setup
SVN-Revision: 31992
2012-05-29 16:39:17 +00:00
Gabor Juhos
ba3ad24514 kirkwood: use uci-defaults to configure different boards
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
2012-05-29 16:39:15 +00:00
Gabor Juhos
c71838faa1 ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
Felix Fietkau
a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
SVN-Revision: 31956
2012-05-28 20:39:50 +00:00
Felix Fietkau
367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
SVN-Revision: 31934
2012-05-28 02:55:59 +00:00
Felix Fietkau
8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
SVN-Revision: 31925
2012-05-27 21:02:41 +00:00
Felix Fietkau
f638414fdc kernel: fix suppressing -s for linking modules when profiling is enabled
SVN-Revision: 31924
2012-05-27 21:02:36 +00:00
Gabor Juhos
8865f0923e ar71xx: fix TL-WR1041 image size
SVN-Revision: 31923
2012-05-27 17:21:47 +00:00
Gabor Juhos
1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
Gabor Juhos
9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
Gabor Juhos
78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
Gabor Juhos
0622fdd82c ramips: rt305x: remove superfluous controller_data assignment
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
Gabor Juhos
7f5bec0642 ramips: make rt2x00 firmware extraction quiet
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
Gabor Juhos
86dad96fd0 generic: rtl8367: rename a misnamed variable
SVN-Revision: 31917
2012-05-27 17:09:47 +00:00
Gabor Juhos
705d31203c generic: rtl8366_smi: remove duplicated spinlock initialization
SVN-Revision: 31916
2012-05-27 17:09:45 +00:00
Gabor Juhos
9217115687 generic: rtl8366_smi: rename debugfs Kconfig symbol
SVN-Revision: 31915
2012-05-27 17:09:43 +00:00
Gabor Juhos
466ef30173 generic: rtl8367: allow to use VLANs > 31
SVN-Revision: 31914
2012-05-27 17:09:41 +00:00
John Crispin
f567980d38 move files-3.3 -> files
SVN-Revision: 31912
2012-05-27 16:13:02 +00:00
John Crispin
8002770520 3.2 R.I.P.
SVN-Revision: 31911
2012-05-27 16:12:59 +00:00
John Crispin
81ddc886e1 dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
John Crispin
6e8fe84472 fixes zyxel p2601hnfx
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
2012-05-27 16:02:20 +00:00
John Crispin
3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
Felix Fietkau
51bc47ce7c kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
SVN-Revision: 31906
2012-05-27 15:16:37 +00:00
Gabor Juhos
0b8c1c8dfb linux/3.2: R.I.P.
SVN-Revision: 31905
2012-05-27 15:01:37 +00:00
Gabor Juhos
20ba6d90e3 xburst: remove support for old kernels
SVN-Revision: 31904
2012-05-27 15:01:35 +00:00
Gabor Juhos
d043cb2c34 xburst: switch to 3.3 and add broken flag
SVN-Revision: 31903
2012-05-27 15:01:33 +00:00
Gabor Juhos
9a26e9f843 xburst: add support for 3.3
SVN-Revision: 31902
2012-05-27 15:01:32 +00:00
Gabor Juhos
9dd7a6d9e2 ppc44x: remove 3.2 support
SVN-Revision: 31901
2012-05-27 15:01:30 +00:00
Gabor Juhos
05d74942b1 ppx44x: switch to 3.3 and add broken flag
SVN-Revision: 31900
2012-05-27 15:01:28 +00:00
Gabor Juhos
9300e0496c ppc44x: add support for 3.3
Compile tested only.

SVN-Revision: 31899
2012-05-27 15:01:27 +00:00
Gabor Juhos
c50f1f7536 cobalt: switch to 3.3 and add broken flag
Compile tested only.

SVN-Revision: 31898
2012-05-27 15:01:26 +00:00
Gabor Juhos
471cf87ff0 ep93xx: remove 3.2 support
SVN-Revision: 31897
2012-05-27 15:01:24 +00:00
Gabor Juhos
400b9b5b87 ep93xx: switch to 3.3 and add broken flag
SVN-Revision: 31896
2012-05-27 15:01:23 +00:00
Gabor Juhos
7501f2364f ep93xx: add support for 3.3
Compile tested only.

SVN-Revision: 31895
2012-05-27 15:01:21 +00:00
Gabor Juhos
907e88a37f au1000: remove 3.2 support
SVN-Revision: 31894
2012-05-27 15:01:18 +00:00
Gabor Juhos
fbe10e73c6 au1000: switch to 3.3 and add broken flag
SVN-Revision: 31893
2012-05-27 15:01:17 +00:00
Gabor Juhos
e065d5cfbe au1000: add support for 3.3
Compile tested only.

SVN-Revision: 31892
2012-05-27 15:01:15 +00:00
Gabor Juhos
de4c4d35e1 linux/3.1: R.I.P.
SVN-Revision: 31891
2012-05-27 15:01:09 +00:00
Gabor Juhos
cead4b47ab omap24xx: remove 3.1 support
SVN-Revision: 31890
2012-05-27 15:01:07 +00:00
Gabor Juhos
7a4db11fbb omap24xx: switch to 3.3 and add broken flag
SVN-Revision: 31889
2012-05-27 15:01:05 +00:00
Gabor Juhos
d004168445 cns3xxx: remove 3.1 support
SVN-Revision: 31888
2012-05-27 15:01:03 +00:00
Gabor Juhos
6f2ca5da39 cns3xxx: switch to 3.3 and add broken flag
SVN-Revision: 31887
2012-05-27 15:01:02 +00:00
Felix Fietkau
6f89cffc9a kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
SVN-Revision: 31886
2012-05-27 14:43:58 +00:00
Jonas Gorski
ec7786c2ec bcm63xx: build images for DSL-274XB revision F1
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
Jonas Gorski
8aac009cc9 bcm63xx: add ath9k to atheros wifi profile
SVN-Revision: 31884
2012-05-27 13:22:48 +00:00
Jonas Gorski
4aa43122ab bcm63xx: enable bcm6328 support and required drivers
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
2012-05-27 13:22:46 +00:00
Jonas Gorski
e5575fe335 bcm63xx: add support for DSL-274XB rev F1
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
Jonas Gorski
a7a82db16f bcm63xx: fix port state after network down
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
2012-05-27 13:22:40 +00:00
Jonas Gorski
e19ed52fd1 bcm63xx: add a fixup for ath9k devices
SVN-Revision: 31880
2012-05-27 13:22:37 +00:00
Jonas Gorski
e34018cc9e bcm63xx: add support for the HSSPI controller
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
2012-05-27 13:22:33 +00:00
Jonas Gorski
099d5eec06 bcm63xx: add preliminary support for bcm6328
SVN-Revision: 31878
2012-05-27 13:22:29 +00:00
Jonas Gorski
7dbb132c88 bcm63xx: add flash type detection
SVN-Revision: 31877
2012-05-27 13:22:25 +00:00
Jonas Gorski
b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
2012-05-27 13:22:22 +00:00
Jonas Gorski
226b030e44 bcm63xx: add a default switch configuration for DSL-274XB
SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
Jonas Gorski
db1ff5c6fa bcm63xx: setup network config through uci-defaults
SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
Jonas Gorski
72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh
SVN-Revision: 31872
2012-05-27 13:22:11 +00:00
Jonas Gorski
dd37687de0 bcm63xx: use the exact board id as board identification string
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
2012-05-27 13:22:08 +00:00
Felix Fietkau
230c0eb2cb kernel: fix a warning in the connmark module
SVN-Revision: 31856
2012-05-24 18:25:08 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos
c57409e79d ar71xx: fix an insignificant typo
Patch from #11485.

SVN-Revision: 31847
2012-05-23 21:05:30 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
2012-05-23 21:05:25 +00:00
Gabor Juhos
758f670376 ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
2012-05-23 21:05:24 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
Gabor Juhos
1e1c0a5405 linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

SVN-Revision: 31841
2012-05-23 21:05:19 +00:00
Felix Fietkau
9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Felix Fietkau
ce59af117c kernel: merge a net-next fq_codel backlog handling fix
SVN-Revision: 31813
2012-05-18 22:12:15 +00:00
Gabor Juhos
02c2f449d7 omap24xx: add support for 3.3
Compile tested only.

SVN-Revision: 31810
2012-05-18 20:22:32 +00:00
Gabor Juhos
c2a2d59db5 cns3xxx: add support for 3.3
Compile tested only.

SVN-Revision: 31809
2012-05-18 20:10:53 +00:00
Gabor Juhos
1fd4bf270b linux/2.6.39: R.I.P.
SVN-Revision: 31808
2012-05-18 20:10:51 +00:00
Gabor Juhos
05c0d8b28e cns3xxx: sync kernel config
SVN-Revision: 31807
2012-05-18 20:10:48 +00:00
Gabor Juhos
9718f03e24 cns3xxx: remove 2.6.39 support
SVN-Revision: 31806
2012-05-18 20:10:46 +00:00
Gabor Juhos
9e78becbac cns3xxx: switch to 3.1
Compile tested only.

SVN-Revision: 31805
2012-05-18 20:10:44 +00:00
Gabor Juhos
07b5a3eea2 x86: remove support for old kernels
SVN-Revision: 31804
2012-05-18 20:10:42 +00:00
Gabor Juhos
604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides
SVN-Revision: 31803
2012-05-18 20:10:38 +00:00
Gabor Juhos
d9dab97d38 x86/ep80579: switch to 3.3
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
2012-05-18 20:10:33 +00:00
Hauke Mehrtens
c63ef04874 brcm47xx: fix nvram read out on devices with serial flash
detect nvram on Linksys E3200

SVN-Revision: 31790
2012-05-18 16:04:10 +00:00
Hauke Mehrtens
7ad663dda6 brcm47xx: bcma: fix null pointer
SVN-Revision: 31789
2012-05-18 15:46:30 +00:00
Hauke Mehrtens
b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3
SVN-Revision: 31788
2012-05-18 15:45:51 +00:00
Hauke Mehrtens
7be88d2ad8 brcm47xx: some fixes for the USB driver
SVN-Revision: 31787
2012-05-18 15:44:25 +00:00
Gabor Juhos
e3678eb33e cobalt: remove 2.6.39 specific patches
SVN-Revision: 31785
2012-05-18 09:59:22 +00:00
Gabor Juhos
a5de52c244 x86/olpc: switch to 3.3
Compile tested only.

SVN-Revision: 31784
2012-05-18 09:57:32 +00:00
Gabor Juhos
9e54e012d6 x86: image: select bootscript images by default for OLPC
SVN-Revision: 31783
2012-05-18 09:57:29 +00:00
Felix Fietkau
3f62f5211a adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
SVN-Revision: 31781
2012-05-17 21:20:23 +00:00
Felix Fietkau
03babf3641 target: add a feature flag for RTC support
SVN-Revision: 31777
2012-05-17 15:28:09 +00:00
Hauke Mehrtens
c30405070c kernel: add some missing config options added by r31756
SVN-Revision: 31774
2012-05-17 13:28:30 +00:00
Hauke Mehrtens
273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
SVN-Revision: 31772
2012-05-17 13:22:38 +00:00
Hauke Mehrtens
3491d8c017 brcm47xx: remove support for kernel 3.2
SVN-Revision: 31771
2012-05-17 13:20:10 +00:00
Gabor Juhos
562e468ae5 x86/thincan: switch to 3.3
Compile tested only.

SVN-Revision: 31765
2012-05-17 06:41:01 +00:00
Gabor Juhos
1f7f8376a6 x86/xen_domu: switch to 3.3
Compile tested only.

SVN-Revision: 31764
2012-05-17 06:41:00 +00:00
Gabor Juhos
8bb7ddecfd x86/kvm_guest: switch to 3.3
Compile tested only.

SVN-Revision: 31763
2012-05-17 06:40:58 +00:00
Gabor Juhos
f14d1a588d x86/generic: switch to 3.3
Compile tested only.

SVN-Revision: 31762
2012-05-17 06:40:56 +00:00
Felix Fietkau
54edbfabac kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

SVN-Revision: 31756
2012-05-16 15:23:03 +00:00
Gabor Juhos
eb2fe5e863 x86/alix2: switch to 3.3
Compile tested only.

SVN-Revision: 31753
2012-05-16 10:45:02 +00:00
Gabor Juhos
fb7da5bbde x86/net5501: switch to 3.3
Compile tested only.

SVN-Revision: 31752
2012-05-16 10:44:59 +00:00
Gabor Juhos
9e049ce25c x86: sync 3.3 configs
SVN-Revision: 31751
2012-05-16 10:44:55 +00:00
Gabor Juhos
19f691f8e4 x86: sync 3.2 configs
SVN-Revision: 31750
2012-05-16 10:44:52 +00:00
Gabor Juhos
724fd5e657 x86: sync 2.6.39 configs
SVN-Revision: 31749
2012-05-16 10:44:49 +00:00
Gabor Juhos
637fd23428 linux/3.3: add missing symbol
SVN-Revision: 31748
2012-05-16 10:44:46 +00:00
Gabor Juhos
67675fd48d linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
It was missing in the previous commit.

SVN-Revision: 31738
2012-05-15 11:12:31 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Felix Fietkau
a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
SVN-Revision: 31736
2012-05-15 10:36:39 +00:00
John Crispin
364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin
07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin
9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin
c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos
2fceae7ec4 linux/3.0: R.I.P.
It is used by the broken omap35xx/gumstix target only.

SVN-Revision: 31717
2012-05-14 15:48:34 +00:00
Gabor Juhos
a3d349a3b3 realview: remove 3.0 support
SVN-Revision: 31716
2012-05-14 15:48:32 +00:00
Gabor Juhos
e2ecabd761 realview: switch to 3.3
SVN-Revision: 31715
2012-05-14 15:48:31 +00:00
Gabor Juhos
46c7d58726 realview: add 3.3 support
SVN-Revision: 31714
2012-05-14 15:48:29 +00:00
Gabor Juhos
8f629f2a22 linux/3.3: more missing config symbols
SVN-Revision: 31713
2012-05-14 15:48:23 +00:00
Felix Fietkau
fab5ee9566 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450)
SVN-Revision: 31711
2012-05-14 14:00:01 +00:00
Hauke Mehrtens
a798a81890 kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
SVN-Revision: 31710
2012-05-14 11:28:02 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Hauke Mehrtens
679b6a0722 amazon: fix section mismatch
SVN-Revision: 31707
2012-05-13 15:31:42 +00:00
Hauke Mehrtens
abd74f86b4 amazon: update amazon target to kernel 3.3
This is just compile tested, my device is currently not working.

SVN-Revision: 31706
2012-05-13 15:10:40 +00:00
Gabor Juhos
60d3ffb49a gemini: remove 2.6.37 support
SVN-Revision: 31700
2012-05-13 12:04:04 +00:00
Gabor Juhos
672ff3de6e gemini: switch to 3.3
SVN-Revision: 31699
2012-05-13 12:04:02 +00:00
Gabor Juhos
d0ac4c1f03 gemini: add support for 3.3
SVN-Revision: 31698
2012-05-13 12:03:59 +00:00
Hauke Mehrtens
482b99a660 brcm47xx: generate image for Linksys WRT610N V1
SVN-Revision: 31696
2012-05-13 00:16:57 +00:00
Hauke Mehrtens
31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.

SVN-Revision: 31695
2012-05-13 00:08:12 +00:00
Hauke Mehrtens
5acb0b72be brcm47xx: fix tg3 ssb patch
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
2012-05-12 23:59:12 +00:00
Gabor Juhos
e710aeeab1 linux/2.6.38: R.I.P.
It is used only by the broken coldfire target.

SVN-Revision: 31688
2012-05-12 12:05:21 +00:00
Gabor Juhos
08ed044595 linux/2.6.37: R.I.P.
SVN-Revision: 31687
2012-05-12 12:05:19 +00:00
Gabor Juhos
c8cede6aa7 linux: add broken flag to remaining targets which are using 2.6.37
SVN-Revision: 31686
2012-05-12 12:05:18 +00:00
Gabor Juhos
a2efef024e iop32x: remove 2.6.37 support
SVN-Revision: 31685
2012-05-12 10:49:36 +00:00
Gabor Juhos
a5d4de7da2 iop32x: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31684
2012-05-12 10:49:34 +00:00
Gabor Juhos
598fe0e93b iop32x: add 3.3 support
SVN-Revision: 31683
2012-05-12 10:49:32 +00:00
Gabor Juhos
bf8e96712e sibyte: remove 2.6.37 support
SVN-Revision: 31682
2012-05-12 10:49:30 +00:00
Gabor Juhos
edb129bb24 sibyte: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31681
2012-05-12 10:49:28 +00:00
Gabor Juhos
fd651daa4b sibyte: add 3.3 support
SVN-Revision: 31680
2012-05-12 10:49:26 +00:00
Gabor Juhos
4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error
SVN-Revision: 31679
2012-05-12 10:49:23 +00:00
Gabor Juhos
cabfa5b364 orion: remove the broken broken flag
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

SVN-Revision: 31674
2012-05-10 20:20:43 +00:00
Gabor Juhos
ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310
SVN-Revision: 31673
2012-05-09 16:16:52 +00:00
John Crispin
dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin
75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin
7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos
200227e0b4 kirkwood: add support for the ZyXEL NSA-310
SVN-Revision: 31669
2012-05-09 11:38:43 +00:00
Gabor Juhos
213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
2012-05-09 11:38:41 +00:00
Gabor Juhos
d4876692c1 kirkwood: enable GPIO sysfs interface
SVN-Revision: 31667
2012-05-09 11:38:40 +00:00
Gabor Juhos
d1eed108bb kirkwood: nuke 2.6.37 support
SVN-Revision: 31666
2012-05-09 11:38:39 +00:00
Gabor Juhos
861b9b25e0 kirkwood: switch to 3.3
SVN-Revision: 31665
2012-05-09 11:38:37 +00:00
Gabor Juhos
b272041998 kirkwood: add 3.3 support
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
2012-05-09 11:38:36 +00:00
Gabor Juhos
500ec36515 ixp4xx: nuke 2.6.37 support
SVN-Revision: 31663
2012-05-09 10:48:44 +00:00
Gabor Juhos
d25a4e7ddc ixp4xx: switch to 3.3
SVN-Revision: 31662
2012-05-09 10:48:43 +00:00
Gabor Juhos
d5093de0b1 mpc85xx: remove 2.6.38 support
SVN-Revision: 31661
2012-05-09 10:48:41 +00:00
Gabor Juhos
ab71a428c5 mpc85xx: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31660
2012-05-09 10:48:39 +00:00
Gabor Juhos
db376b45d9 orion: nuke 3.0 support
SVN-Revision: 31659
2012-05-09 10:48:38 +00:00
Gabor Juhos
24e2385a59 orion: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31658
2012-05-09 10:48:37 +00:00
Gabor Juhos
d640a15b73 linux/3.3: add missing RTC symbol
SVN-Revision: 31654
2012-05-09 10:48:30 +00:00
Gabor Juhos
93c9980b94 ar71xx: fix build error if PCI is disabled
SVN-Revision: 31646
2012-05-07 21:16:22 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos
6b5012ce1f pxa: remove 2.6.37 support
SVN-Revision: 31643
2012-05-07 17:40:15 +00:00
Gabor Juhos
1f1fd8616f pxa: switch to 3.3 and mark it as broken
It is working in qemu, but it has not been tested on real hardware.

SVN-Revision: 31642
2012-05-07 17:40:09 +00:00
Gabor Juhos
b284c0e804 pxa: add support for 3.3
SVN-Revision: 31641
2012-05-07 17:40:06 +00:00
Jo-Philipp Wich
1a01559520 atheros: Fix compilation
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

SVN-Revision: 31640
2012-05-07 17:06:39 +00:00
Jonas Gorski
b218b15709 bcm63xx: fix a race between PCI bus scan and fallback sprom registration
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

SVN-Revision: 31638
2012-05-06 21:25:34 +00:00
Felix Fietkau
0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Hauke Mehrtens
d30f8da466 brcm47xx: add gpio_request_one()
This fixes a compile error with kernel 3.3.

SVN-Revision: 31635
2012-05-06 20:44:37 +00:00
Felix Fietkau
7799c88aa4 atheros: clean up the patches some more
SVN-Revision: 31626
2012-05-06 17:15:00 +00:00
Felix Fietkau
9b20187ad5 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
SVN-Revision: 31625
2012-05-06 17:08:30 +00:00
Jonas Gorski
30362b90af AR7: don't mark as broken
Linux 3.3.4 boots fine on my AR7 device.

SVN-Revision: 31623
2012-05-06 14:04:19 +00:00
Gabor Juhos
28e897845f ar7: remove 2.6.37 support
SVN-Revision: 31617
2012-05-05 17:32:43 +00:00
Gabor Juhos
047a51c4fd ar7: switch to 3.3 and mark the target as broken
SVN-Revision: 31616
2012-05-05 17:32:41 +00:00
Gabor Juhos
dd884a6b73 ar7: add 3.3 support
SVN-Revision: 31615
2012-05-05 17:32:39 +00:00
Gabor Juhos
e85a44f11b ar7: fix kernel_entry extraction
SVN-Revision: 31614
2012-05-05 17:32:36 +00:00
Gabor Juhos
9486904079 ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31610
2012-05-05 17:02:41 +00:00
Gabor Juhos
ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
2012-05-05 17:02:35 +00:00
Gabor Juhos
56f2e08537 ar71xx: update 3.3 patches
SVN-Revision: 31602
2012-05-05 13:56:35 +00:00
Gabor Juhos
8fffc6d6df ar71xx: fix a typo in the db120 mach file
Reported-by: Sven Eckelmann <sven@narfation.org>

SVN-Revision: 31601
2012-05-05 13:56:30 +00:00
Hauke Mehrtens
8c352ff853 brcm47xx: update target to kernel 3.3
SVN-Revision: 31599
2012-05-05 12:53:37 +00:00
Gabor Juhos
2e3f8c480e linux/2.6.32: R.I.P.
SVN-Revision: 31597
2012-05-05 11:43:34 +00:00
Gabor Juhos
e005aed223 rdc: remove 2.6.32 support
SVN-Revision: 31596
2012-05-05 11:43:32 +00:00
Gabor Juhos
0e086cfaf7 rdc: switch to 3.3 and mark the target as broken
SVN-Revision: 31595
2012-05-05 11:43:30 +00:00
Gabor Juhos
787b253859 rb532: remove 2.6.32 support
SVN-Revision: 31594
2012-05-05 11:43:29 +00:00
Gabor Juhos
63a532a472 rb532: switch to 3.3 and mark the target broken
SVN-Revision: 31593
2012-05-05 11:43:26 +00:00
Gabor Juhos
b120e7f22a rb532: add 3.3 support
SVN-Revision: 31592
2012-05-05 11:43:23 +00:00
Gabor Juhos
6caa1aab10 mpc83xx: remove broken flag
SVN-Revision: 31591
2012-05-05 11:43:21 +00:00
Gabor Juhos
257a201b56 mpc83xx: populate network config from an uci-default script
SVN-Revision: 31590
2012-05-05 11:43:19 +00:00
Gabor Juhos
13ce8f8a77 mpc83xx: cleanup rb333.dts
SVN-Revision: 31589
2012-05-05 11:43:16 +00:00
Gabor Juhos
a3d9877518 mpc83xx: fix MAC addresses on the RB333
SVN-Revision: 31588
2012-05-05 11:43:13 +00:00
Gabor Juhos
1a5a9c5dae mpc83xx: fix build warnings in RB333/600 dtb wrappers
SVN-Revision: 31587
2012-05-05 11:43:10 +00:00
Gabor Juhos
7ffa3fe02c linux/2.6.32: fix layer7 patch
SVN-Revision: 31586
2012-05-05 07:20:13 +00:00
Imre Kaloz
9a91dc9f71 upgrade to 3.3, enable framebuffer
SVN-Revision: 31576
2012-05-03 21:51:58 +00:00
Jonas Gorski
b393464fb4 adm5120: add missing NULL terminator to partition parser list
Fixes #11372.

SVN-Revision: 31574
2012-05-03 21:03:50 +00:00
Hauke Mehrtens
22b2e3fbb9 brcm47xx: add support for kernel 3.3
SVN-Revision: 31573
2012-05-03 20:18:41 +00:00
Gabor Juhos
3349cf2691 Fix iptables abuse of kernel header files. Use exported headers instead.
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31566
2012-05-03 09:43:10 +00:00
Gabor Juhos
b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
Gabor Juhos
90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
Gabor Juhos
fb28062182 mpc83xx: remove 2.6.36 support
SVN-Revision: 31555
2012-05-02 18:27:26 +00:00
Gabor Juhos
3269924fed mpc83xx: switch to 3.3
SVN-Revision: 31554
2012-05-02 18:27:25 +00:00
Gabor Juhos
8ee595315d mpc83xx: add support for 3.3
SVN-Revision: 31553
2012-05-02 18:27:22 +00:00
Gabor Juhos
b4b5f2d018 linux/3.3: add more missing symbols
SVN-Revision: 31552
2012-05-02 18:27:19 +00:00
Florian Fainelli
5d9b44d110 use a define for the poll and debounce interval
SVN-Revision: 31550
2012-05-02 15:40:26 +00:00
Gabor Juhos
7a2b3d8a55 linux/3.3: add more missing symbols
SVN-Revision: 31548
2012-05-01 08:00:26 +00:00
Gabor Juhos
70322ba3d1 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
SVN-Revision: 31547
2012-05-01 08:00:25 +00:00
Imre Kaloz
880de62f91 switch to 2.6.38
SVN-Revision: 31546
2012-05-01 07:00:17 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos
e931ffd678 linux: rtl836x: add a generic reset_switch function
SVN-Revision: 31536
2012-04-29 18:29:31 +00:00
Gabor Juhos
1d9400263f linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
SVN-Revision: 31535
2012-04-29 18:29:29 +00:00
Gabor Juhos
badd7a3cf2 linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
SVN-Revision: 31534
2012-04-29 18:29:26 +00:00
Gabor Juhos
3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs
SVN-Revision: 31533
2012-04-29 18:29:24 +00:00
Gabor Juhos
a8d3109208 rb532: remove 2.6.35 support
The generic 2.6.35 support has been remove long time ago.

SVN-Revision: 31532
2012-04-29 16:56:07 +00:00
Gabor Juhos
532b74ff7b linux/3.3: refresh patches
SVN-Revision: 31531
2012-04-29 16:56:03 +00:00
Gabor Juhos
27a1f6652a rdc: add 3.3 support
SVN-Revision: 31530
2012-04-29 15:59:49 +00:00
Gabor Juhos
c59b60fa0b mpc85xx: add support for 3.3
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31529
2012-04-29 15:55:28 +00:00
Gabor Juhos
f687ca2296 orion: add 3.3 support
SVN-Revision: 31528
2012-04-29 15:20:40 +00:00
Gabor Juhos
923ebbac81 linux/3.3: yet another missing symbol
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31527
2012-04-29 15:08:24 +00:00
Gabor Juhos
55fdc18beb linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31525
2012-04-29 15:08:22 +00:00
Gabor Juhos
f6d5998d31 mpc85xx: add kmod-booke-wdt to the default packages
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31523
2012-04-29 15:00:38 +00:00
Gabor Juhos
296086868a mpc85xx: don't override CONFIG_WATHCDOG
SVN-Revision: 31521
2012-04-29 15:00:36 +00:00
Gabor Juhos
77735b5930 linux: move CONFIG_BOOKE_WDT to the generic config
SVN-Revision: 31520
2012-04-29 15:00:34 +00:00
Gabor Juhos
4fa9cf6c33 linux/2.6.36: R.I.P.
SVN-Revision: 31519
2012-04-29 15:00:33 +00:00
Gabor Juhos
3bc2afc384 linux: add broken flag to targets which are using 2.6.36
SVN-Revision: 31518
2012-04-29 15:00:32 +00:00
Gabor Juhos
417185b33c adm5120: create a new subtarget for the RB1xx devices
SVN-Revision: 31513
2012-04-29 07:36:46 +00:00
Gabor Juhos
7925eea45f adm5120: share a common kernel config between the subtargets
SVN-Revision: 31512
2012-04-29 07:36:44 +00:00
Gabor Juhos
e96d52d198 adm5120: merge 3.3 patches
SVN-Revision: 31511
2012-04-29 07:36:43 +00:00
Gabor Juhos
19be4923e0 adm5120: remove 2.6.32 support
SVN-Revision: 31510
2012-04-29 07:36:37 +00:00
Gabor Juhos
aa48f1326b adm5120: switch to 3.3.3
SVN-Revision: 31509
2012-04-29 07:36:36 +00:00
Gabor Juhos
a1a0f67748 adm5120: fix macronix bootloc patch
SVN-Revision: 31508
2012-04-29 07:36:35 +00:00
Gabor Juhos
8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
Gabor Juhos
1a0ef04231 adm8668: merge 3.3 fixes
SVN-Revision: 31497
2012-04-28 10:41:43 +00:00
Gabor Juhos
87ae19eaa3 adm8668: nuke 2.6.36 support
SVN-Revision: 31496
2012-04-28 10:39:47 +00:00
Gabor Juhos
9a7e9e76a3 adm8668: switch to 3.3
SVN-Revision: 31495
2012-04-28 10:38:53 +00:00
Florian Fainelli
e047cf1899 switch to gpio-keys-polled
SVN-Revision: 31491
2012-04-27 16:44:48 +00:00
Gabor Juhos
af2b3518af linux/3.3: yet another missing symbol
SVN-Revision: 31488
2012-04-27 06:31:43 +00:00
Felix Fietkau
34ffb526a2 build: rework verbosity level selection
V=99 and V=1 are now deprecated in favor of a new verbosity class system,
though the old flags are still supported.
You can set the V variable on the command line (or OPENWRT_VERBOSE in the
environment) to one or more of the following characters:

- s: stdout+stderr (equal to the old V=99)
- c: commands (for build systems that suppress commands by default, e.g. kbuild)
- w: warnings/errors only (equal to the old V=1)

SVN-Revision: 31484
2012-04-26 17:53:56 +00:00
Hauke Mehrtens
d7b7b99d6e brcm47xx: BCMA - Modified PCI CFG space access
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch

SVN-Revision: 31481
2012-04-25 20:32:17 +00:00
Gabor Juhos
d8c7ac8a8a adm8668: add support for 3.3
SVN-Revision: 31480
2012-04-25 18:53:49 +00:00
Gabor Juhos
7f09ba740a adm8668: build gzip compressed uImage for testing
SVN-Revision: 31479
2012-04-25 18:53:48 +00:00
Gabor Juhos
15d641eee1 adm8668: use a suffix for initramfs images
SVN-Revision: 31478
2012-04-25 18:53:46 +00:00
Gabor Juhos
a447f1810c ar71xx: enable MIB counters in the built-in switch of the AR934x
SVN-Revision: 31476
2012-04-25 13:02:11 +00:00
Gabor Juhos
cad1fa359d adm5120: remove 2.6.38 support
SVN-Revision: 31475
2012-04-25 12:57:35 +00:00
Gabor Juhos
671361c7ea adm5120: add 3.3 support
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>

SVN-Revision: 31474
2012-04-25 12:57:33 +00:00
Gabor Juhos
43d67fa995 linux/3.3: fix compiler warnings in the plat_nand driver
SVN-Revision: 31473
2012-04-25 12:57:29 +00:00
Gabor Juhos
4319d95842 adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN
SVN-Revision: 31472
2012-04-25 12:57:26 +00:00
Hauke Mehrtens
e90d3f1663 brcm47xx: A couple of other (inconsequential) BCMA patches
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31471
2012-04-24 21:56:42 +00:00
Hauke Mehrtens
b07998cf11 brcm47xx: b44 fix workaround detection on some brcm47xx boards
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.

SVN-Revision: 31470
2012-04-24 20:35:46 +00:00
Jonas Gorski
8a38c62c07 bcm63xx: drop linux 3.2 support
SVN-Revision: 31464
2012-04-24 11:49:27 +00:00
Jonas Gorski
77219290e1 bcm63xx: drop linux 3.0 support
SVN-Revision: 31463
2012-04-24 11:49:24 +00:00
Jonas Gorski
49de6c1714 bcm63xx: switch kernel to 3.3
SVN-Revision: 31462
2012-04-24 11:49:19 +00:00
Gabor Juhos
59b0c1b2b9 ar71xx: TL-WR741NDv4: add WLAN LED config
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 31461
2012-04-24 11:38:44 +00:00
Jonas Gorski
8fd383ae2e kernel: update linux 3.3 to 3.3.3
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
Jonas Gorski
7ccf25f7da kernel: add some more missing kernel config symbols
SVN-Revision: 31458
2012-04-24 09:25:32 +00:00
Jo-Philipp Wich
ed957f7c84 enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack (#11339)
SVN-Revision: 31454
2012-04-24 00:55:57 +00:00
Gabor Juhos
4b6833b176 x86: restore config-default, it is needed for 2.6.39
Reported-by: Thomas Heil <heil@terminal-consulting.de>

SVN-Revision: 31452
2012-04-23 16:56:08 +00:00
Gabor Juhos
1ab80c7817 ramips: rt305x: add support for the UR-336UN board
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
Gabor Juhos
3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
Florian Fainelli
34f4f4a0c5 switch to 3.3
SVN-Revision: 31448
2012-04-23 12:33:30 +00:00
Florian Fainelli
9e054eb21a add support for 3.3
SVN-Revision: 31447
2012-04-23 12:33:27 +00:00
Florian Fainelli
460ef32930 switch to 3.3.2
SVN-Revision: 31446
2012-04-23 12:33:24 +00:00
Florian Fainelli
5eeee1f80e add 3.3 support
SVN-Revision: 31445
2012-04-23 12:33:19 +00:00
John Crispin
d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
Felix Fietkau
dcd185c2f8 ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG)
SVN-Revision: 31441
2012-04-22 19:19:49 +00:00
Claudio Mignanti
858a50b41c flexibity: Cleanup the subtarget config
SVN-Revision: 31440
2012-04-22 16:56:10 +00:00
Claudio Mignanti
6cd35fe3d3 tqma9263: update board definition for 3.x series and fix config choose
SVN-Revision: 31436
2012-04-22 09:09:53 +00:00
Claudio Mignanti
2852345af0 Remove old netus board definition
SVN-Revision: 31435
2012-04-22 09:09:50 +00:00
Gabor Juhos
755b97303e ep93xx: remove 2.6.39 support
SVN-Revision: 31434
2012-04-22 07:20:55 +00:00
Gabor Juhos
631bf82241 amazon: remove 2.6.3{0,2} support
SVN-Revision: 31433
2012-04-22 07:20:53 +00:00
Gabor Juhos
96b5d437d6 omap24xx: remove 2.6.38 support
SVN-Revision: 31426
2012-04-21 17:16:40 +00:00
Gabor Juhos
76448ed5cf xburst: remove 2.6.36 support
SVN-Revision: 31422
2012-04-21 17:03:10 +00:00
Gabor Juhos
0cdd676554 malta: remove 2.6.39 and 3.0 support
SVN-Revision: 31421
2012-04-21 16:56:15 +00:00
Gabor Juhos
0d148cb63b mpc83xx: remove 2.6.32 support
SVN-Revision: 31420
2012-04-21 16:51:59 +00:00
Gabor Juhos
884a4d47f0 octeon: remove 2.6.30 support
SVN-Revision: 31419
2012-04-21 16:45:32 +00:00
Gabor Juhos
26b3cdad1c cns3xxx: remove 2.6.31 support
SVN-Revision: 31418
2012-04-21 16:42:05 +00:00
Gabor Juhos
b2b965a696 au1000: remove 2.6.39 support
SVN-Revision: 31416
2012-04-21 16:30:40 +00:00
Gabor Juhos
f63d216467 x86: remove 2.6.32 support
SVN-Revision: 31415
2012-04-21 16:17:48 +00:00
Gabor Juhos
bc2a7bfa70 ixp4xx: remove 2.6.3{2,8} and 3.0 support
SVN-Revision: 31414
2012-04-21 16:17:46 +00:00
Gabor Juhos
50610aa869 linux/2.6.31: R.I.P.
SVN-Revision: 31412
2012-04-21 15:18:58 +00:00
Gabor Juhos
2e5d3d2795 linux/2.6.30: R.I.P.
SVN-Revision: 31411
2012-04-21 15:18:55 +00:00
Gabor Juhos
c6379f6295 linux: add broken flag to targets which are using 2.6.30
SVN-Revision: 31410
2012-04-21 15:18:54 +00:00
Gabor Juhos
c627479641 linux/3.3: nuke the gpio_buttons patch
It is superseded by the in-kernel gpio-keys-polled driver.

SVN-Revision: 31409
2012-04-21 14:26:35 +00:00
Gabor Juhos
2d91cb94ac mpc52xx: nuke 3.2 config
SVN-Revision: 31408
2012-04-21 12:36:47 +00:00
Gabor Juhos
0a83f90e21 mpc52xx: switch to 3.3.2
SVN-Revision: 31407
2012-04-21 12:36:45 +00:00
Gabor Juhos
e904724726 mpc52xx: add kernel config for 3.3
SVN-Revision: 31406
2012-04-21 12:36:44 +00:00
Gabor Juhos
5024ffb976 ramips: nuke 3.2 suport
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
Gabor Juhos
6c8ca78067 ramips: switch to 3.3.2
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
Gabor Juhos
5c325b0057 ramips: add support for 3.3
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
Gabor Juhos
7f902c962b ramips: rt305x: add OHCI/EHCI registration code for RT3352
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
Gabor Juhos
1645928135 ramips: rt305x: fix CPU clock detection on RT3352
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
Gabor Juhos
fb69e28eaf ramips: rt305x: use different memory size setup for RT3352
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
Gabor Juhos
818aeba960 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
Gabor Juhos
6b677e1d22 ramips: add swconfig to the default package list
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
Gabor Juhos
ced031a0b2 ramips: build initramfs image for the Fonera 2.0N
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
Gabor Juhos
fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
Gabor Juhos
88b5827c52 ramips: remove hardcoded console parameter from kernel configs
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
Gabor Juhos
1ffcaae700 linux/3.3: fix crypto4xx build failure
SVN-Revision: 31394
2012-04-21 10:47:04 +00:00
Mirko Vogt
87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
Gabor Juhos
2624d67c08 ppc40x: nuke 3.2 support
SVN-Revision: 31387
2012-04-20 21:03:15 +00:00
Gabor Juhos
f4833aa075 ppc40x: switch to 3.3.2
SVN-Revision: 31386
2012-04-20 21:03:14 +00:00
Gabor Juhos
cfe4a6cb93 ppc40x: sync 3.3 config
SVN-Revision: 31385
2012-04-20 21:03:12 +00:00
Gabor Juhos
9140d4ee44 ar71xx: remove duplicated AP121 Kconfig entry
SVN-Revision: 31382
2012-04-20 16:50:16 +00:00
Gabor Juhos
ef54b5736d cns21xx: remove 3.2 support
SVN-Revision: 31381
2012-04-20 15:25:00 +00:00
Gabor Juhos
e667eb752b cns21xx: switch to 3.3.2
SVN-Revision: 31380
2012-04-20 15:24:59 +00:00
Gabor Juhos
d1af548557 cns21xx: add support for 3.3
SVN-Revision: 31379
2012-04-20 15:24:57 +00:00
Gabor Juhos
434655d460 linux/3.3: update ARM mach-types
SVN-Revision: 31378
2012-04-20 15:24:54 +00:00
Claudio Mignanti
5c33f4e305 Add a missing symbol for config-3.3
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31373
2012-04-20 13:33:04 +00:00
Claudio Mignanti
701309ec11 Reorganize the subtargets, group subtargets per cpu family
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31372
2012-04-20 13:33:01 +00:00
Claudio Mignanti
3ac08ca653 Update the kernel to 3.3.x series, remove patches that doesn't apply anymore
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31371
2012-04-20 13:32:55 +00:00
Claudio Mignanti
f50231aeb3 Ensure that the bin directory exists before copy the files
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31370
2012-04-20 13:27:16 +00:00
Florian Fainelli
147646fc66 remove some annoying warnings and fix snd modules build
SVN-Revision: 31365
2012-04-20 13:25:26 +00:00
Florian Fainelli
eadf592371 add missing config symbol
SVN-Revision: 31364
2012-04-20 13:25:23 +00:00
Gabor Juhos
da2cc2c79a ar71xx: nuke 3.2 support
SVN-Revision: 31360
2012-04-19 21:32:05 +00:00
Gabor Juhos
9854d6fb7f ar71xx: switch to 3.3.2
SVN-Revision: 31359
2012-04-19 21:31:58 +00:00
Gabor Juhos
a6b4b5fd6e ar71xx: sync 3.3 config
SVN-Revision: 31358
2012-04-19 21:31:53 +00:00
Gabor Juhos
ef97415b92 ar71xx: merge/reorganize 3.3 patches
SVN-Revision: 31357
2012-04-19 21:31:50 +00:00
Gabor Juhos
408de85883 ar71xx: use ap91_pci_init for RB751{,G}
SVN-Revision: 31356
2012-04-19 21:31:48 +00:00
Gabor Juhos
0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup
SVN-Revision: 31355
2012-04-19 21:31:43 +00:00
Gabor Juhos
78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper
SVN-Revision: 31354
2012-04-19 21:31:42 +00:00
Gabor Juhos
5c9ca38e47 ar71xx: add sanity checks to decode_rle
Also use -EINVAL instead of -1.

SVN-Revision: 31353
2012-04-19 21:31:40 +00:00
Gabor Juhos
8f921175ba avr32: remove old kernel support
SVN-Revision: 31352
2012-04-19 21:23:07 +00:00
Gabor Juhos
80705b9fb1 avr32: switch to 3.3.2
uClibc-0.9.33 causes segfaults at least in iptables.
The segfaults are present with 2.6.39 as well, so it
makes no sense to stick to that version.

SVN-Revision: 31351
2012-04-19 21:23:02 +00:00
Gabor Juhos
abb57ea96f avr32: sync kernel config
SVN-Revision: 31350
2012-04-19 21:22:50 +00:00
Gabor Juhos
3108a4bb4b avr32: fix atomic64_t related kernel build errors
SVN-Revision: 31349
2012-04-19 21:22:48 +00:00
Florian Fainelli
26b3c31634 switch to 3.2.15
SVN-Revision: 31345
2012-04-18 15:36:33 +00:00
Florian Fainelli
2e641b13c0 fix 335-mips-kexec patch for all 3+ kernels
SVN-Revision: 31344
2012-04-18 15:36:30 +00:00
Jonas Gorski
d0bfc67e2e kernel: x86: also update subtarget kernel versions
SVN-Revision: 31338
2012-04-17 21:01:43 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski
3a9b6dc313 kernel: update linux 3.3 to 3.3.2
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
Jonas Gorski
ee4c47a134 kernel: update linux 3.2 to 3.2.15
SVN-Revision: 31335
2012-04-17 12:50:54 +00:00
Jo-Philipp Wich
cfe30549a1 don't overwrite version.mk, substitute REVISION instead
SVN-Revision: 31327
2012-04-17 09:31:16 +00:00
Jo-Philipp Wich
a0f0213462 bump to Linux v3.3.1
SVN-Revision: 31314
2012-04-16 15:04:47 +00:00
Jo-Philipp Wich
9d11e3395a Fix bufferbloat in PPPoATM TX queue
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31313
2012-04-16 15:04:45 +00:00
Jo-Philipp Wich
2036c23faa Update ppp TX restart patch to avoid race condition
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31312
2012-04-16 15:04:44 +00:00
John Crispin
83948d6385 adds 3.3 patches and files
SVN-Revision: 31307
2012-04-16 12:31:48 +00:00
Florian Fainelli
fb2b2b958e backport missing platform data members for gpio-keys
SVN-Revision: 31306
2012-04-16 12:09:15 +00:00
Florian Fainelli
e4f3867650 backport a missing eeprom 93cx6 define for building rt2x00
SVN-Revision: 31305
2012-04-16 12:09:13 +00:00
Florian Fainelli
db728b6583 add missing debugging symbols
SVN-Revision: 31302
2012-04-16 11:38:35 +00:00
Florian Fainelli
bb7cea7e65 add missing debugging symbols
SVN-Revision: 31301
2012-04-16 11:38:33 +00:00
Florian Fainelli
c0ca7aed8e mark set but unused variables as such
SVN-Revision: 31296
2012-04-15 18:53:48 +00:00
Florian Fainelli
a70ad13a79 refresh 2.6.32 patches
SVN-Revision: 31295
2012-04-15 18:53:45 +00:00
Florian Fainelli
47c8473475 refresh 2.6.32 patches
SVN-Revision: 31294
2012-04-15 18:53:42 +00:00
Florian Fainelli
f2f5820d13 silence an annoying x86 warning
SVN-Revision: 31293
2012-04-15 18:53:39 +00:00
Hauke Mehrtens
eb2191f5b0 at91: Missing kernel config symbols for AT91 target platform
I looked into buildbot snapshots and noticed that some platforms have
not successfully compiled for a long time. One example is at91, which
seems to be missing device-related kernel config symbols and the
snapshot build crashes already there.

Please find attached a patch that makes the at91 kernel config and
build to succeed again.

Signed off by: hannu.nyman@iki.fi

SVN-Revision: 31288
2012-04-15 09:50:51 +00:00
Hauke Mehrtens
7475bb3dc6 brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs.
bcma: use fallback sprom if no on chip sprom is available

SVN-Revision: 31285
2012-04-14 12:12:22 +00:00
Hauke Mehrtens
62f0c3793b kernel: refresh patches
SVN-Revision: 31279
2012-04-13 19:37:15 +00:00
Hauke Mehrtens
6af575967c kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing
SVN-Revision: 31278
2012-04-13 19:35:40 +00:00
Hauke Mehrtens
c75e700d42 brcm47xx: remove support for kernel 3.0
SVN-Revision: 31276
2012-04-13 16:53:16 +00:00
Felix Fietkau
99768ccb7c ixp4xx: add support for linux 3.3.1
SVN-Revision: 31275
2012-04-13 13:38:49 +00:00
Felix Fietkau
ec667208e6 kernel: fix arm compressed images build on mac os x
SVN-Revision: 31274
2012-04-13 13:38:45 +00:00
Jo-Philipp Wich
93b8648b15 don't overwrite version.mk, substitute REVISION instead
SVN-Revision: 31271
2012-04-13 10:47:45 +00:00
Jo-Philipp Wich
4b230e19fc PATCH: Disable console terminal in Grub for alix2 target
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 31270
2012-04-12 23:30:27 +00:00
Jo-Philipp Wich
3cb72f38fd populate repositories.conf from version.mk
SVN-Revision: 31268
2012-04-12 23:08:13 +00:00
John Crispin
e3889bcf7c update 3.2 patches
sync with lantiq kernel series

SVN-Revision: 31260
2012-04-12 12:33:56 +00:00
Jo-Philipp Wich
60a708edf1 remove preconfig variables
SVN-Revision: 31257
2012-04-12 09:43:43 +00:00
Jo-Philipp Wich
d558632955 remove preconfig variables
SVN-Revision: 31256
2012-04-12 09:43:41 +00:00
Jo-Philipp Wich
fcfdbd4961 add missing Kernel symbol spotted by buildbot
SVN-Revision: 31232
2012-04-10 10:09:27 +00:00
Imre Kaloz
ed5abd5e4a add missing symbols
SVN-Revision: 31231
2012-04-09 17:03:02 +00:00
Jonas Gorski
50eba35cd3 kernel: update linux 3.3 to 3.3.1
SVN-Revision: 31223
2012-04-09 14:48:56 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
Jonas Gorski
1a57b05f47 kernel: add some more additional missing config symbols for 3.2 and 3.3
SVN-Revision: 31221
2012-04-09 14:48:46 +00:00
Mirko Vogt
b0971e69f2 level up target xburst to linux kernel version 3.2.1
Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu

SVN-Revision: 31218
2012-04-08 12:09:52 +00:00
Gabor Juhos
f14fd53e3c ar71xx: image: build initramfs images for the WHR boards
SVN-Revision: 31209
2012-04-06 06:45:08 +00:00
Gabor Juhos
e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
2012-04-06 06:45:07 +00:00
Gabor Juhos
fe6d66afe2 ar71xx: add rb750 to diag.sh
Support status led in diag.sh for RB750

Patch from: Evangelos Arkalis <arkalis.e@gmail.com>

SVN-Revision: 31207
2012-04-06 06:45:04 +00:00
John Crispin
da3f3f8f9d add Easybox 802 - ARV752DPW
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

SVN-Revision: 31206
2012-04-05 20:03:21 +00:00
John Crispin
94af65db49 enable usb on dgn3500
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

SVN-Revision: 31205
2012-04-05 20:03:19 +00:00
Florian Fainelli
b545c4b4fe generic: use magic_long in sysupgrade
Signed-off-by: Matthias Bücher <mail@maddes.net>

SVN-Revision: 31200
2012-04-04 16:06:29 +00:00
Florian Fainelli
930a820172 update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic
Signed-off-by: Matthias Bücher <mail@maddes.net>

SVN-Revision: 31199
2012-04-04 16:06:25 +00:00
Florian Fainelli
b47fc0f936 add support for D-Link DNS-323
this patch adds support for D-Link DNS323 storage device.
You can find more info here:

http://dns323.lukaperkov.net/

Currently you need serial cable to flash OpenWrt on DNS-323.

Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >

SVN-Revision: 31198
2012-04-04 15:53:55 +00:00
Florian Fainelli
90e89bf4a9 add missing DM/MD config symbols
SVN-Revision: 31197
2012-04-04 15:53:52 +00:00
Florian Fainelli
152f38a615 fix typos in adm5120 switch driver (#4241)
SVN-Revision: 31196
2012-04-04 15:53:15 +00:00
Florian Fainelli
09ade17a15 add Edimax specific MAGIC_MAC_BASE to read MAC from flash (#4241]
SVN-Revision: 31195
2012-04-04 15:53:12 +00:00
Florian Fainelli
b180e0fb3b fix support for 2.6.38 kernel
This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP:
    - kernel comes up with machine selection during build, even though everything was properly set in menuconfig
    - USB api changes
Successfully built and tested with r29755.

Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de>

SVN-Revision: 31194
2012-04-04 15:53:09 +00:00
Florian Fainelli
f087e07b5c refresh 2.6.38 patches
SVN-Revision: 31193
2012-04-04 15:53:07 +00:00
Florian Fainelli
db04bcb8e7 fix gcc-4.6 set but unused warnings
SVN-Revision: 31192
2012-04-04 15:53:04 +00:00
Florian Fainelli
30f0cb476f refresh patches
SVN-Revision: 31191
2012-04-04 15:53:01 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Jonas Gorski
1a395bd290 kernel: add some more missing kernel symbols for 3.2 and 3.3
SVN-Revision: 31157
2012-04-01 07:56:49 +00:00
Jonas Gorski
400ab1802f kernel: add some more missing serial 8250 config symbols
SVN-Revision: 31149
2012-03-30 08:11:01 +00:00
Jo-Philipp Wich
e9c4d3d1f2 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
Hauke Mehrtens
de0527a354 brcm47xx: fix memory leak, backport from the mainline kernel
SVN-Revision: 31143
2012-03-29 15:44:06 +00:00
Hauke Mehrtens
9992ce3a51 brcm47xx: add missing breaks into the nvram read code in the switch case statements
SVN-Revision: 31142
2012-03-29 15:43:16 +00:00
Felix Fietkau
5f87ce9150 kernel: restore ebtables functionality by running netfilter hooks when the ebtables module is loaded
SVN-Revision: 31141
2012-03-29 14:15:54 +00:00
Jonas Gorski
f7df1eafc4 bcm63xx: enable bcm6368 for linux 3.3 and build images
Only build bcm6368 images when building for linux 3.3.

SVN-Revision: 31133
2012-03-28 20:42:37 +00:00
Jonas Gorski
c7ae2fccb6 bcm63xx: add initial support for bcm6368 boards
SVN-Revision: 31132
2012-03-28 20:42:34 +00:00
Jonas Gorski
68f268a5eb bcm63xx: add driver for the internal hw trng on bcm6368
SVN-Revision: 31131
2012-03-28 20:42:30 +00:00
Jonas Gorski
78fb818f7c bcm63xx: replace SPI driver with latest upstream version
SVN-Revision: 31130
2012-03-28 20:42:25 +00:00
Jonas Gorski
a2adca6ee9 bcm63xx: add ethernet support for bcm6368
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.

Also drop the ethernet patch for bcm6345 for now, it needs rework.

SVN-Revision: 31129
2012-03-28 20:42:20 +00:00
Jonas Gorski
0876972850 bcm63xx: add missing bits from extirq support
Add missing external IRQ code parts for older chips in the new code.

SVN-Revision: 31128
2012-03-28 20:42:15 +00:00
Jonas Gorski
44d546290a bcm63xx: reorder patches
Reorder patches for a clearer distinction between the purposes of
the different patches.

SVN-Revision: 31127
2012-03-28 20:42:09 +00:00
Hauke Mehrtens
13b6ec1d05 brcm47xx: update flash drivers
SVN-Revision: 31126
2012-03-28 17:03:18 +00:00
Mirko Vogt
0ad9a02b9b Revert commit 31091 - "[target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0"
'set-but-unused-variable'-issues are dealt with in a generic way now

SVN-Revision: 31124
2012-03-28 15:28:21 +00:00
Mirko Vogt
b4508ce183 deal with 'set-but-unused-variables' in a more generic way
SVN-Revision: 31123
2012-03-28 15:28:13 +00:00
Hauke Mehrtens
2f6e19e203 brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name
Eliminate unneeded procedure by incorporating code into bcma_device_name

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31120
2012-03-28 09:36:50 +00:00
Hauke Mehrtens
a31a9b8650 brcm47xx: BCMA - Always map 4 bytes
This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes.

Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31119
2012-03-28 09:35:01 +00:00
Gabor Juhos
b77217d963 ar71xx: boost SPI flash read performance
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

SVN-Revision: 31118
2012-03-27 19:38:17 +00:00
Gabor Juhos
102c6df148 ar71xx: improve SPI flash read/write performance
mtd_speedtest results:

                        page write speed
                    old         new       delta
DB120            209 KiB/s   226 KiB/s     +8.13%
TL-WR1043ND v1   122 KiB/s   148 KiB/s    +21.31%
TL-WR703N v1     153 KiB/s   194 KiB/s    +26.80%
TL-MR3220 v1     130 KiB/s   156 KiB/s    +20.00%
TL-WR2543ND v1   158 KiB/s   202 KiB/s    +27.85%
TL-WR741ND v2    122 KiB/s   152 KiB/s    +24.59%
ALFA AP96        229 KiB/s   260 KiB/s    +13.54%
WNDR3700         202 KiB/s   223 KiB/s    +10.40%

                         page read speed
                    old        new       delta
DB120            691 KiB/s   929 KiB/s    +34.44%
TL-WR1043ND v1   372 KiB/s   754 KiB/s   +102.69%
TL-WR703N v1     375 KiB/s   745 KiB/s    +98.67%
TL-MR3220 v1     372 KiB/s   752 KiB/s   +102.15%
TL-WR2543ND v1   307 KiB/s   564 KiB/s    +83.71%
TL-WR741ND v2    315 KiB/s   525 KiB/s    +66.67%
ALFA AP96        515 KiB/s   702 KiB/s    +36.31%
WNDR3700         515 KiB/s   697 KiB/s    +35.34%

SVN-Revision: 31117
2012-03-27 19:38:15 +00:00
Gabor Juhos
6455178a6a ar71xx: image: build initramfs images for more boards
SVN-Revision: 31116
2012-03-27 19:38:13 +00:00
Gabor Juhos
e2bd975a2a ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers
SVN-Revision: 31115
2012-03-27 19:38:11 +00:00
Gabor Juhos
c7966a12b5 ar71xx: image: pass mtdlayout variables by value
SVN-Revision: 31114
2012-03-27 19:38:10 +00:00
Gabor Juhos
692e47f49f ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs
SVN-Revision: 31113
2012-03-27 19:38:08 +00:00
Gabor Juhos
6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
2012-03-27 19:38:07 +00:00
Gabor Juhos
61ee283899 ar71xx: remove the built-in MTD map of the PB92 board
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
2012-03-27 19:38:05 +00:00
Gabor Juhos
1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
2012-03-27 19:38:04 +00:00
Gabor Juhos
24554ef187 ar71xx: reclaim the 'user_property' partition on WHR-* boards
SVN-Revision: 31109
2012-03-27 19:38:02 +00:00
Gabor Juhos
87e4ec687b ar71xx: remove the built-in MTD maps of several boards
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

SVN-Revision: 31108
2012-03-27 19:38:01 +00:00
Gabor Juhos
e6b685650b ar71xx: use modules for LED triggers
SVN-Revision: 31107
2012-03-27 19:37:59 +00:00
Gabor Juhos
e28cd648b7 ar71xx: disable CONFIG_{I2C,SPI}_GPIO
SVN-Revision: 31104
2012-03-27 19:37:53 +00:00
Gabor Juhos
6627f45a87 ar71xx: sync 3.3 config
SVN-Revision: 31103
2012-03-27 19:37:52 +00:00
Gabor Juhos
f4d1e3d147 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
SVN-Revision: 31102
2012-03-27 19:37:51 +00:00
Gabor Juhos
d495277d9f ramips: rt305x: build image for the DIR-615 rev D boards
Patch from #10105.

SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
Gabor Juhos
e4e24c5512 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
Florian Fainelli
af2c5df66a ppp: Fix high softirq utilization with pppoa
Users of the Geos platform are reporting high CPU utilization.
This seems to be rooted in a problem with the TX queue restart in PPP.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 31096
2012-03-27 17:47:44 +00:00
Florian Fainelli
8de1475a27 add missing INET_UDP_DIAG symbol
SVN-Revision: 31095
2012-03-27 17:47:41 +00:00
Florian Fainelli
60e195d399 geos: add 'tc' and kmod-sched for bonding
The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 31094
2012-03-27 17:47:37 +00:00
Hauke Mehrtens
a5abb08100 brcm47xx: update sprom patches like they are in the mainline kernel
SVN-Revision: 31093
2012-03-27 17:07:28 +00:00
Mirko Vogt
ed8902d686 remove set but unused variable which leads into compiling errors with GCC >= 4.6.0
SVN-Revision: 31091
2012-03-27 16:29:19 +00:00
Hauke Mehrtens
6fd915ba37 brcm47xx: update usb driver to the version send for mainline kernel integartion
SVN-Revision: 31089
2012-03-27 15:38:56 +00:00
Felix Fietkau
5f799a0e97 ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
John Crispin
b982e8166b cleanup atheros wifi handling
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31064
2012-03-25 08:50:38 +00:00
John Crispin
5ea100c39b cleanup image makefile
SVN-Revision: 31063
2012-03-25 08:50:32 +00:00
John Crispin
f27c030141 update /etc/uci-defaults/*
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
John Crispin
ba4a7fca7b update profiles
SVN-Revision: 31061
2012-03-25 08:50:27 +00:00
John Crispin
0f6a9d5c7c bump kernel to 3.2.12
SVN-Revision: 31060
2012-03-25 08:50:09 +00:00
John Crispin
f35b9a9a4c fixes breakage introduced in 776722ce36ac95877efb7fd771dde2f6ffc96433
SVN-Revision: 31054
2012-03-22 13:07:34 +00:00
Jens Muecke
1d2b19c4bf Disable keyboard for x86 default config - revoke patch 30966
This was already fixed by commit 30309 and is part of generic x86 target.

SVN-Revision: 31052
2012-03-21 19:10:02 +00:00
Gabor Juhos
ff5b7ef713 linux: refresh patches against 3.3
SVN-Revision: 31047
2012-03-20 15:55:07 +00:00
Gabor Juhos
32e4801fb0 linux/3.{2,3}: yet another missing NET_VENDOR symbol
SVN-Revision: 31045
2012-03-20 15:55:04 +00:00
Gabor Juhos
c8bf90d414 ar71xx: fix IRQ number for the AR7240 OHCI controller
SVN-Revision: 31044
2012-03-20 15:02:48 +00:00
Jo-Philipp Wich
bf96743548 base-files: gracefully handle empty variables in preinit (#11155)
SVN-Revision: 31030
2012-03-19 20:37:12 +00:00
Gabor Juhos
c1dc6df8bd kernel: update linux 3.2 to 3.2.12
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
Gabor Juhos
f86e412389 ar71xx: disable unused file system drivers in the nand subtarget
SVN-Revision: 31027
2012-03-19 15:57:07 +00:00
Gabor Juhos
b50cfe077c ar71xx: sync kernel configs
SVN-Revision: 31026
2012-03-19 15:57:06 +00:00
Gabor Juhos
8a2e4b49de ar71xx: add initial support for RB750GL
SVN-Revision: 31025
2012-03-19 15:57:04 +00:00
Gabor Juhos
d19f3dd512 ar71xx: make rb750_latch_change 'static void'
SVN-Revision: 31024
2012-03-19 15:57:03 +00:00
Gabor Juhos
5348f46c80 ar71xx: add latch_change field to rb750_led_platform_data
SVN-Revision: 31023
2012-03-19 15:57:01 +00:00
Gabor Juhos
8a471efe01 ar71xx: add platform data for the RB750 NAND driver
SVN-Revision: 31022
2012-03-19 15:56:59 +00:00
Imre Kaloz
cb41fa7655 upgrade to 3.2, disable ppp by default until we figure out why ppp_generic breaks bootup
SVN-Revision: 31020
2012-03-19 11:27:34 +00:00
Imre Kaloz
3fd38d99f2 add missing Kconfig symbols
SVN-Revision: 31019
2012-03-19 11:26:15 +00:00
Gabor Juhos
e89df99083 ar71xx: use a different pll value on DB120
SVN-Revision: 31018
2012-03-19 11:11:22 +00:00
Gabor Juhos
e9b45ebaba ar71xx: add AR934x specific interface speed setup for ge0
SVN-Revision: 31017
2012-03-19 11:11:20 +00:00
Gabor Juhos
6028889727 ar71xx: remove static MTD maps from AP121/DB120 boards
SVN-Revision: 31016
2012-03-19 11:11:19 +00:00
Felix Fietkau
db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Gabor Juhos
6ac12fbb3c ar71xx: use AR8327 on the DB120 board
SVN-Revision: 31012
2012-03-18 22:06:58 +00:00
Gabor Juhos
faf82f3e10 generic: ar8216: add support for the AR8327 chip
SVN-Revision: 31011
2012-03-18 22:06:55 +00:00
Gabor Juhos
fa7a83df4b generic: ar8216: allow to use more ports
SVN-Revision: 31010
2012-03-18 22:06:51 +00:00
Gabor Juhos
2ddbcb98ee generic: ar8216: reorder chip specific functions
SVN-Revision: 31009
2012-03-18 22:06:48 +00:00
Gabor Juhos
552cffd97a generic: ar8216: reorder switch_dev specific functions
SVN-Revision: 31008
2012-03-18 22:06:45 +00:00
Gabor Juhos
71e356029e generic: ar8216: use ar8216_sw_ prefix for switchdev related functions
SVN-Revision: 31007
2012-03-18 22:06:42 +00:00
Gabor Juhos
9a01936724 generic: ar8216: use switch_dev->ports in for loops
SVN-Revision: 31006
2012-03-18 22:06:40 +00:00
Gabor Juhos
2ce9e4753c generic: ar8216: add read_port_status field to ar8xxx_chip
SVN-Revision: 31005
2012-03-18 22:06:39 +00:00
Gabor Juhos
01cad79e03 generic: ar8216: add init_globals field to ar8xxx_chip
SVN-Revision: 31004
2012-03-18 22:06:36 +00:00
Gabor Juhos
56cacb3b21 generic: ar8216: add caps field to ar8xxx_chip
SVN-Revision: 31003
2012-03-18 22:06:33 +00:00
Gabor Juhos
d1c585d4b1 generic: ar8216: add vtu_load_vlan field to ar8xxx_chip
SVN-Revision: 31002
2012-03-18 22:06:30 +00:00
Gabor Juhos
332310fba2 generic: ar8216: add vtu_flush field to ar8xxx_chip
SVN-Revision: 31001
2012-03-18 22:06:26 +00:00
Gabor Juhos
d964410cbc generic: ar8216: add init_port field to ar8xxx_chip
SVN-Revision: 31000
2012-03-18 22:06:23 +00:00
Gabor Juhos
006b3b846e generic: ar8216: add setup_port field to ar8xxx_chip
SVN-Revision: 30999
2012-03-18 22:06:19 +00:00
Gabor Juhos
eb5f0067b6 generic: ar8216: add hw_init field to ar8xxx_chip
SVN-Revision: 30998
2012-03-18 22:06:15 +00:00
Gabor Juhos
a8371ad566 generic: ar8216: add a separate structure for chip specific stuff
Also add a hw_init function into that.

SVN-Revision: 30997
2012-03-18 22:06:12 +00:00
Gabor Juhos
d18133b32d generic: ar8216: rename chip field of struct ar8216
SVN-Revision: 30996
2012-03-18 22:06:08 +00:00
Gabor Juhos
6e143e467f generic: ar8216: move ar8216_id_chip function
Also remove the inline annotation.

SVN-Revision: 30995
2012-03-18 22:06:05 +00:00
Gabor Juhos
1c99979b2c generic: ar8216: rename ar8216_ops to ar8216_sw_ops
SVN-Revision: 30994
2012-03-18 22:06:03 +00:00
Jo-Philipp Wich
884f964e62 alix2: add require crypto kmods (#10410)
SVN-Revision: 30980
2012-03-18 18:56:02 +00:00
Gabor Juhos
36e9a33df7 cns21xx: build uImage for the NS-K330
SVN-Revision: 30974
2012-03-18 12:07:56 +00:00
Gabor Juhos
89babcf633 cns21xx: remove 2.6.3x support
SVN-Revision: 30973
2012-03-18 12:07:51 +00:00
Gabor Juhos
776172531f cns21xx: switch to 3.2.9
SVN-Revision: 30972
2012-03-18 12:07:50 +00:00
Gabor Juhos
6dbe40f7d4 cns21xx: add support for 3.2
SVN-Revision: 30971
2012-03-18 12:07:48 +00:00
Jens Muecke
deac1c16a1 Enable keyboard for x86
This is required for qemu like descripted in
here http://wiki.openwrt.org/doc/howto/qemu

SVN-Revision: 30966
2012-03-17 21:32:08 +00:00
Felix Fietkau
7b609a31be kernel: improve profiling support, keep static symbols when profiling is enabled
SVN-Revision: 30964
2012-03-17 13:03:14 +00:00
Florian Fainelli
9b60eb478a remove support for old kernels
SVN-Revision: 30963
2012-03-17 11:55:59 +00:00
Florian Fainelli
a2a18fe1ea switch to 3.2
SVN-Revision: 30962
2012-03-17 11:55:56 +00:00
Florian Fainelli
6e2c0fbe9f add support for 3.2
SVN-Revision: 30961
2012-03-17 11:55:53 +00:00
Florian Fainelli
9ef8de0e0a add some more missing symbols
SVN-Revision: 30960
2012-03-17 11:55:49 +00:00
Gabor Juhos
f601339e79 ar71xx: add profile and generate image for the JA76PF2 board
SVN-Revision: 30958
2012-03-16 18:00:40 +00:00
Gabor Juhos
6036151187 ar71xx: add support for the jjPlus JA76PF2 board
SVN-Revision: 30957
2012-03-16 18:00:34 +00:00
Gabor Juhos
a680662391 ar71xx: change LED name prefix on the jjplus boards
SVN-Revision: 30956
2012-03-16 18:00:26 +00:00
Gabor Juhos
90279757bb mpc52xx: switch to 3.2.9
SVN-Revision: 30955
2012-03-16 15:35:00 +00:00
Felix Fietkau
dd0f928b14 kernel: optimize out remaining netfilter hooks in the bridging code if bridge filtering is disabled
SVN-Revision: 30954
2012-03-16 09:21:59 +00:00
Felix Fietkau
b957208807 swconfig: use a mutex instead of a spinlock, many swconfig calls sleep
SVN-Revision: 30952
2012-03-15 19:32:31 +00:00
Felix Fietkau
404a4c1fcd ar8216: fix a MTU related regression
Switch reset on AR8316 appears to clobber the MTU configuration register
and possibly other global config registers. Move global configuration
register init writes back to the reset callback.

SVN-Revision: 30951
2012-03-15 16:57:27 +00:00
Gabor Juhos
c00b53f3d0 ar71xx: move micrel PHY driver to the generic linux target
SVN-Revision: 30946
2012-03-15 09:25:53 +00:00
Gabor Juhos
0011804302 linux/3.3: build mdio_register_board_info into the kernel if PHYLIB is selected
SVN-Revision: 30945
2012-03-15 09:25:49 +00:00
Gabor Juhos
eb096bca59 linux/3.2: build mdio_register_board_info into the kernel if PHYLIB is selected
SVN-Revision: 30944
2012-03-15 09:25:47 +00:00
Hauke Mehrtens
cee31ca238 brcm47xx: add support for NAND flash on devices using bcma
This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2.

Thank you Tathagata Das <tathagata@alumnux.com> for the patch

SVN-Revision: 30943
2012-03-14 22:59:39 +00:00
Hauke Mehrtens
7fee567dc0 brcm47xx: move and rename the patches
The patches are now grouped by the part what they are doing and are using three digest numbers.

This does not remove or adds anything

SVN-Revision: 30942
2012-03-14 21:48:23 +00:00
Jonas Gorski
fab5be9b4f lantiq: load dwc_otg early
Needed for using external rootfs on usb sticks.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 30940
2012-03-14 10:59:52 +00:00
Gabor Juhos
e3af7c82f8 generic: ar8216: merge multiple if statements in ar8216_hw_apply
SVN-Revision: 30928
2012-03-13 17:33:12 +00:00
Gabor Juhos
6a57a1fbdb imagebuilder: fix parallel building (closes #11117)
SVN-Revision: 30927
2012-03-13 17:29:40 +00:00
Gabor Juhos
ff909edf94 ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports
SVN-Revision: 30926
2012-03-13 17:29:38 +00:00
Gabor Juhos
cd6a4cde13 ar71xx: ag71xx: start aneg on switch PHYs after reset
SVN-Revision: 30925
2012-03-13 17:29:37 +00:00
Gabor Juhos
7c9534cfd7 ar71xx: ag71xx: poll PHY status of all available switch ports
SVN-Revision: 30924
2012-03-13 17:29:36 +00:00
Gabor Juhos
8449eecf5f ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch
SVN-Revision: 30923
2012-03-13 17:29:34 +00:00
Gabor Juhos
1c5ac02a29 ar71xx: reset the switch on AR934x before ethernet device registration
SVN-Revision: 30922
2012-03-13 17:29:33 +00:00
Gabor Juhos
17d3131d3c ar71xx: fix a typo in ar71xx_regs.h
SVN-Revision: 30921
2012-03-13 17:29:31 +00:00
Florian Fainelli
07486c4d96 remove udc patch since it is unused
SVN-Revision: 30920
2012-03-13 14:06:44 +00:00
Felix Fietkau
b387cfd6e4 kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config
SVN-Revision: 30917
2012-03-13 10:06:45 +00:00
Gabor Juhos
66df117d1b ar71xx: use a dummy callback for interfaces with fixed speed
SVN-Revision: 30913
2012-03-12 20:38:58 +00:00
Gabor Juhos
8b2b37ae58 ar71xx: merge ar934x_bo_ddr_flush patch
SVN-Revision: 30912
2012-03-12 20:38:57 +00:00
Gabor Juhos
b0bb0793b9 ar71xx: enable UART function for early_printk/console
SVN-Revision: 30909
2012-03-12 17:32:39 +00:00
Gabor Juhos
727a8c20c0 linux/3.3: refresh patches against 3.3-rc7
SVN-Revision: 30908
2012-03-12 17:32:38 +00:00
Gabor Juhos
18f7081e17 ramips: rt305x: add profile for the AZtech HW-5503G board
Patch from #11085.

SVN-Revision: 30907
2012-03-12 17:29:06 +00:00
Gabor Juhos
fdb175f909 linux/3.3: allow to set platform_data for phy devices
SVN-Revision: 30906
2012-03-12 16:28:01 +00:00
Gabor Juhos
1f79bfec0b linux/3.2: allow to set platform_data for phy devices
SVN-Revision: 30905
2012-03-12 16:28:00 +00:00
Gabor Juhos
2c2c288a3c linux/3.3: add missing config symbol
SVN-Revision: 30904
2012-03-12 16:27:58 +00:00
Gabor Juhos
ccc939ebc0 ar71xx: remove a 3.3 patch, it is already in 3.3-rc7
SVN-Revision: 30903
2012-03-12 16:27:57 +00:00
Gabor Juhos
0814e61841 ar71xx: fix Compex WPE72 detection
SVN-Revision: 30902
2012-03-12 16:27:56 +00:00
Gabor Juhos
0f77d0b2ba ramips: add RT3350 detection
SVN-Revision: 30900
2012-03-12 16:12:13 +00:00
Jo-Philipp Wich
2dedd94d66 expose CONFIG_NETFILTER_NETLINK for external kmods
SVN-Revision: 30894
2012-03-12 00:09:23 +00:00
Gabor Juhos
05d3f559f5 ramips: rt305x: rewrite SoC detection
SVN-Revision: 30890
2012-03-11 19:05:59 +00:00
Gabor Juhos
8cf8ee8f9d ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
SVN-Revision: 30889
2012-03-11 19:05:57 +00:00
Gabor Juhos
acb4ad86e5 ramips: replace RALINK_SOC_* macros with global variables
SVN-Revision: 30888
2012-03-11 19:05:56 +00:00
Gabor Juhos
8cff770eb3 ramips: introduce ramips_soc_prom_init and move SoC detection into that
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
Gabor Juhos
2149facb53 generic: ar8216: use usleep_range in ar8216_mii_{read,write}
msleep(1) can sleep for up to 20ms.

SVN-Revision: 30885
2012-03-11 17:19:14 +00:00
Gabor Juhos
77d0a8ca85 generic: ar8216: add a helper function for writing PHY debug registers
SVN-Revision: 30884
2012-03-11 16:49:35 +00:00
Gabor Juhos
dad19ac8b2 generic: ar8216: add lockep assertion to ar8216_rmw
SVN-Revision: 30883
2012-03-11 16:49:33 +00:00
Gabor Juhos
6c51c47962 ramips: build initramfs image for DIR-{3,6}00 boards
SVN-Revision: 30882
2012-03-11 16:39:31 +00:00
Gabor Juhos
f400a9cdd9 linux/3.3: show correct name for MIPS 24KEc in /proc/cpuinfo
SVN-Revision: 30881
2012-03-11 16:39:30 +00:00
Gabor Juhos
c9d71c8387 linux/3.2: show correct name for MIPS 24KEc in /proc/cpuinfo
SVN-Revision: 30880
2012-03-11 16:39:28 +00:00
Gabor Juhos
4e15457e0e ramips: allow to use DSP ASE on RT3xxx
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
Gabor Juhos
088dd4e879 ar71xx: stop image building if a loader is missing
SVN-Revision: 30877
2012-03-11 14:03:28 +00:00
Hauke Mehrtens
067a065305 brcm47xx: make patch apply
SVN-Revision: 30876
2012-03-11 13:36:46 +00:00
Hauke Mehrtens
7dcdf69388 brcm47xx: BCMA - Find names of non BCM cores
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 30875
2012-03-11 12:55:20 +00:00
Hauke Mehrtens
d6d40b2d60 BCMA - Account for variable PCI memory base/size
Thank you Nathan Hintz for the patch

SVN-Revision: 30874
2012-03-11 12:52:43 +00:00
Hauke Mehrtens
bbf739a59f BCMA - Reorder SPROM fill
The SPROM is initialized in bcm47xx_fill_sprom, so move the call to bcm47xx_fill_sprom_ethernet after it.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 30873
2012-03-11 11:50:59 +00:00
Gabor Juhos
1ad06d4c3a generic: ar8216: coding style cleanup
SVN-Revision: 30857
2012-03-08 10:21:14 +00:00
Gabor Juhos
e2d3cb69a1 generic: ar8216: don't use static variable in ar8236_hw_init
SVN-Revision: 30856
2012-03-08 10:21:12 +00:00
Gabor Juhos
291e2dd583 generic: ar8216: move register inititalization into hw_init
SVN-Revision: 30855
2012-03-08 10:21:11 +00:00
Gabor Juhos
e3538fa852 generic: ar8216: set chip type directly in ar8216_id_chip
SVN-Revision: 30854
2012-03-08 10:21:10 +00:00
Gabor Juhos
a6c69e63b6 generic: ar8216: simplify ar8216_config_init
SVN-Revision: 30853
2012-03-08 10:21:08 +00:00
Gabor Juhos
31584880bf ar71xx: add watchdog driver to the default package list
SVN-Revision: 30852
2012-03-08 09:00:17 +00:00
Gabor Juhos
127a2b1a4d linux/3.{2,3}: even more NAND symbols
SVN-Revision: 30850
2012-03-07 22:32:54 +00:00
Gabor Juhos
2d89fa7f43 ar71xx: fix WPS button polarity on TL-WR2543N
SVN-Revision: 30849
2012-03-07 19:50:53 +00:00
Gabor Juhos
52a89cd95c generic: ar8216: move port initialization into a separate function
SVN-Revision: 30848
2012-03-07 16:32:46 +00:00
Gabor Juhos
0097cf7161 generic: ar8216: improve ar8216_wait_bit function
SVN-Revision: 30847
2012-03-07 16:32:45 +00:00
Gabor Juhos
2370828599 generic: ar8216: use ar8216_read_port_link to get the CPU port link parameters
SVN-Revision: 30846
2012-03-07 16:32:43 +00:00
Gabor Juhos
d8a8df51ca generic: ar8216: use the generic get_port_link implementation
SVN-Revision: 30845
2012-03-07 16:32:42 +00:00
Gabor Juhos
215e07177e generic: rtl8367: use the generic get_port_link implementation
SVN-Revision: 30844
2012-03-07 16:32:40 +00:00
Gabor Juhos
9e1be3b809 generic: rtl8366s: use the generic get_port_link implementation
SVN-Revision: 30843
2012-03-07 16:32:38 +00:00
Gabor Juhos
e2f0264afe generic: rtl8366rb: use the generic get_port_link implementation
SVN-Revision: 30842
2012-03-07 16:32:37 +00:00
Gabor Juhos
c455a0f7be ar71xx: ag71xx: fix get_port_link callback
SVN-Revision: 30841
2012-03-07 16:32:35 +00:00
Gabor Juhos
5a83b3a5c7 ar71xx: ag71xx: use the generic get_port_link implementation
SVN-Revision: 30840
2012-03-07 16:32:34 +00:00
Gabor Juhos
759c341e68 generic: swconfig: add a generic get_port_link implementation
SVN-Revision: 30839
2012-03-07 16:32:33 +00:00
Gabor Juhos
fc9db6f410 generic: ar8216: use mdiobus_write in ar8236_hw_init
SVN-Revision: 30838
2012-03-07 16:32:31 +00:00
Gabor Juhos
7112130105 generic: ar8216: use bus->mdio_lock directly in ar8216_mii_{read,write}
SVN-Revision: 30837
2012-03-07 16:32:30 +00:00
Gabor Juhos
a31e090255 generic: ar8216: fix phy driver name
SVN-Revision: 30836
2012-03-07 16:32:28 +00:00
Jo-Philipp Wich
9a047b52d4 enable EFI partition support by default, adds ca. 8K uncompressed on ar71xx (#8672)
SVN-Revision: 30835
2012-03-07 14:14:52 +00:00
Gabor Juhos
f03e7f2c7a linux/3.2: fix crypto4xx build failure
SVN-Revision: 30834
2012-03-07 11:57:49 +00:00
Gabor Juhos
43a20aa4c6 linux/3.1: add missing NAND symbols
SVN-Revision: 30827
2012-03-05 18:01:54 +00:00
Gabor Juhos
bdcbf426ee linux/3.0: add missing NAND symbols
SVN-Revision: 30826
2012-03-05 18:01:52 +00:00
Florian Fainelli
1029786936 remove 3.1 support
SVN-Revision: 30823
2012-03-05 16:50:42 +00:00
Florian Fainelli
75b5f4a6b4 rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic
SVN-Revision: 30822
2012-03-05 14:49:34 +00:00
Florian Fainelli
c327915156 generate generic images for BCM96358VW and BCM96358VW2 (#10666)
SVN-Revision: 30821
2012-03-05 14:49:31 +00:00
Florian Fainelli
ca1e59660e wire bcm96348gw-10 reset button (#10854)
SVN-Revision: 30820
2012-03-05 14:23:45 +00:00
Florian Fainelli
631a035a76 Merge branch 'bcm63xx'
SVN-Revision: 30819
2012-03-05 13:29:54 +00:00