Commit Graph

50699 Commits

Author SHA1 Message Date
Daniel Golle
53a7d5d614 ath79: fix RS-485 on Teltonika RUT-955
DTR GPIO isn't actually needed and triggers boot warning.
TX pin was off by one (GPIO 19 instead of GPIO 18).

Reported-by: @tophirsch
Fixes: d1130ad265 ("ath79: add support for Teltonika RUT955")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-17 17:41:24 +00:00
Tony Ambardar
6eca2e40e7 malta: prune subtarget configs
Drop autogenerated kernel config options. These aren't needed to build and
can obscure options relevant to the subtarget.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-17 15:35:33 +01:00
Tony Ambardar
fd1c285040 malta: update kernel 5.10 configs
Update generic config to add missing options that prompt during builds. Run
"make kernel_oldconfig" to refresh malta target config.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-17 15:35:33 +01:00
Tony Ambardar
3e2f42a802 malta: support kernel 5.10
Add linux 5.10 as testing kernel and copy generic config from 5.4.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-17 15:35:33 +01:00
Bjørn Mork
963b2ae702 realtek: enable SerDes NWAY and SGMII negotiation
This allows copper SFPs to negotiate speeds lower than 1gig.

Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-03-17 10:01:21 +01:00
Bjørn Mork
07bf5aaa4c realtek: enabled Marvell and Realtek PHYs
The rtl83xx-phy driver is necessary for proper configuration of the
PHYs if U-Boot hasn't done that.

1000Base-T SFPs often contains a Marvell 88E1111 and will not work
without this driver. Include it by default to support copper SFPs.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-03-17 10:01:21 +01:00
Bjørn Mork
2a912fb63a realtek: enable HWMON for SFP sensors
This adds SFP sensors as a hwmon device, allowing readout of
temperatures, DOM and other sensor readings available from the
SFP.  Example from a ZyXEL GS1900-10HP with a DOM capable
1000Base-SX SFP:

root@gs1900-10hp:~# grep . /sys/class/hwmon/hwmon0/*
/sys/class/hwmon/hwmon0/curr1_crit:90
/sys/class/hwmon/hwmon0/curr1_crit_alarm:0
/sys/class/hwmon/hwmon0/curr1_input:4
/sys/class/hwmon/hwmon0/curr1_label:bias
/sys/class/hwmon/hwmon0/curr1_lcrit:0
/sys/class/hwmon/hwmon0/curr1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/curr1_max:85
/sys/class/hwmon/hwmon0/curr1_max_alarm:0
/sys/class/hwmon/hwmon0/curr1_min:0
/sys/class/hwmon/hwmon0/curr1_min_alarm:0
/sys/class/hwmon/hwmon0/in0_crit:3795
/sys/class/hwmon/hwmon0/in0_crit_alarm:0
/sys/class/hwmon/hwmon0/in0_input:3317
/sys/class/hwmon/hwmon0/in0_label:VCC
/sys/class/hwmon/hwmon0/in0_lcrit:2805
/sys/class/hwmon/hwmon0/in0_lcrit_alarm:0
/sys/class/hwmon/hwmon0/in0_max:3465
/sys/class/hwmon/hwmon0/in0_max_alarm:0
/sys/class/hwmon/hwmon0/in0_min:3135
/sys/class/hwmon/hwmon0/in0_min_alarm:0
/sys/class/hwmon/hwmon0/name:sfp_p10
/sys/class/hwmon/hwmon0/power1_crit:708
/sys/class/hwmon/hwmon0/power1_crit_alarm:0
/sys/class/hwmon/hwmon0/power1_input:259
/sys/class/hwmon/hwmon0/power1_label:TX_power
/sys/class/hwmon/hwmon0/power1_lcrit:89
/sys/class/hwmon/hwmon0/power1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/power1_max:501
/sys/class/hwmon/hwmon0/power1_max_alarm:0
/sys/class/hwmon/hwmon0/power1_min:126
/sys/class/hwmon/hwmon0/power1_min_alarm:0
/sys/class/hwmon/hwmon0/power2_crit:1259
/sys/class/hwmon/hwmon0/power2_crit_alarm:0
/sys/class/hwmon/hwmon0/power2_input:404
/sys/class/hwmon/hwmon0/power2_label:RX_power
/sys/class/hwmon/hwmon0/power2_lcrit:6
/sys/class/hwmon/hwmon0/power2_lcrit_alarm:0
/sys/class/hwmon/hwmon0/power2_max:794
/sys/class/hwmon/hwmon0/power2_max_alarm:0
/sys/class/hwmon/hwmon0/power2_min:10
/sys/class/hwmon/hwmon0/power2_min_alarm:0
/sys/class/hwmon/hwmon0/temp1_crit:100000
/sys/class/hwmon/hwmon0/temp1_crit_alarm:0
/sys/class/hwmon/hwmon0/temp1_input:22547
/sys/class/hwmon/hwmon0/temp1_label:temperature
/sys/class/hwmon/hwmon0/temp1_lcrit:-50000
/sys/class/hwmon/hwmon0/temp1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/temp1_max:85000
/sys/class/hwmon/hwmon0/temp1_max_alarm:0
/sys/class/hwmon/hwmon0/temp1_min:-40000
/sys/class/hwmon/hwmon0/temp1_min_alarm:0
/sys/class/hwmon/hwmon0/uevent:OF_NAME=sfp-p10
/sys/class/hwmon/hwmon0/uevent:OF_FULLNAME=/sfp-p10
/sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_0=sff,sfp
/sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_N=1

Tested-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-03-17 10:01:21 +01:00
Bjørn Mork
e8d391bd46 realtek: re-enable sfp driver for ZyXEL GS1900-10HP
There is no need to define a static link or a phy for the sfp
ports.  Using phy-mode and managed properties to  describe the
link to the sfp phy.

We have to keep the now unconnected virtual "phys" because the
switch  driver uses their "phy-is-integrated" property to figure
out which ports to enable as fibre ports.

Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-03-17 10:01:21 +01:00
Bjørn Mork
785d830e88 realtek: need to handle PHY_INTERFACE_MODE_NA for sfps
From the validate docs in include/linux/phylink.h:

 When state->interface is PHY_INTERFACE_MODE_NA, phylink expects the
 MAC driver to return all supported link modes.

Tested-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-03-17 10:01:21 +01:00
Bjørn Mork
b8e473d18c realtek: fix link-state interrupt
This bug was the root cause for the failing sfp driver.

Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-03-17 10:01:21 +01:00
Álvaro Fernández Rojas
b3f4197139 mtd: fix imagetag compilation
Commit b5b0796a13 added an uint32_t to mtd.h without including stdint, which
results in a compilation error for those files not including stdint.h.

In file included from imagetag.c:36:
mtd.h:15:8: error: unknown type name 'uint32_t'
 extern uint32_t opt_trxmagic;
        ^~~~~~~~
imagetag.c: In function 'trx_fixup':
imagetag.c:180:10: warning: unused variable 'res' [-Wunused-variable]
  ssize_t res;
          ^~~
imagetag.c:177:14: warning: unused variable 'scan' [-Wunused-variable]
  void *ptr, *scan;
              ^~~~
imagetag.c: In function 'trx_check':
imagetag.c:246:27: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
     struct bcm_tag *tag = (const struct bcm_tag *) buf;
                           ^
make[3]: *** [<builtin>: imagetag.o] Error 1

Fixes: b5b0796a13 ("mtd: add option for TRX magic to fixtrx")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-17 08:42:05 +01:00
Rafał Miłecki
e1b4fd52a8 bcm4908: backport recent bcm_sf2 changes
One 5.12 link fix and 5.13 crossbar support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-17 08:10:54 +01:00
Rafał Miłecki
7091e31230 bcm4908: backport recent bcm4908_enet changes
This includes 5.12 fix and 5.13 improvements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-16 23:57:52 +01:00
Paul Spooren
0f7cd97f81 build,ib: add STRIP_ABI option for manifest
The ImageBuilder `make manifest` prints all installed packages. This
function can be used to create a list of package and corresponding
package versions before attempting image creation.

When called with `--strip-abi` OPKG can automatically strip attached
ABIVersions from package names. Make this function accessible for the
ImageBuilder by adding a `STRIP_ABI` variable.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-16 11:00:08 -10:00
Magnus Kroken
dbde2bcf60 mbedtls: update to 2.16.10
This release of Mbed TLS provides bug fixes and minor enhancements. This
release includes fixes for security issues.

Security fixes:
* Fix a buffer overflow in mbedtls_mpi_sub_abs()
* Fix an errorneous estimation for an internal buffer in
mbedtls_pk_write_key_pem()
* Fix a stack buffer overflow with mbedtls_net_poll() and
mbedtls_net_recv_timeout()
* Guard against strong local side channel attack against base64 tables
by making access aceess to them use constant flow code

Full release announcement:
https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.10

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2021-03-16 21:17:02 +01:00
Álvaro Fernández Rojas
34f898ec29 bmips: backport bcm6368-mdio-mux support
This patch has been accepted for linux v5.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-16 20:06:00 +01:00
Álvaro Fernández Rojas
7ec9d95567 bmips: enable CONFIG_B53_MDIO_DRIVER
Some devices have external switches connected by MDIO.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-16 20:00:51 +01:00
Álvaro Fernández Rojas
b434c524b1 bmips: backport b53 spi device tree patch
This patch has been accepted for linux v5.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-16 20:00:51 +01:00
Álvaro Fernández Rojas
be16951494 bmips: dgnd3700-v2: fix ethernet
This is a temporary workaround to get the ethernet working, since external
switch is connected by MDIO and it needs additional work.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-16 20:00:51 +01:00
Ilya Lipnitskiy
680f91d0e5 kernel: backports: mt7530: fix TRGMII mode after reset
Backport upstream patch that fixes TRGMII mode now that mt7530 is
actually resetting the switch on ramips devices.

Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both.

Fixes: 69551a2442 ("ramips: manage low reset lines")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-03-16 19:27:55 +08:00
Tony Ambardar
662ceebc4c x86/legacy: fix subtarget CPU for kernel 5.10
The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit
generic subtarget. However, the legacy subtarget arch wasn't set to the
older 586MMX, defaulting instead to the i686.

Explicitly set the subtarget arch and refresh the subtarget config, as done
already with the old geode subtarget.

Fixes: 8391781389 ("x86: support kernel 5.10")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-15 19:12:03 -07:00
Rafał Miłecki
d7c8ca4d0b bcm4908: backport first PHY 5.13 patches
1. Upstream accepted version of Kconfig change
2. Documentation binding fix

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-15 20:30:21 +01:00
Daniel Golle
c17b1dca60
mediatek: mt7622: drop duplicate DEVICE_PACKAGES
kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part
of the target's default package set. No need to add them again for
buffalo_wsr-2533dhp2.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-15 16:40:31 +00:00
INAGAKI Hiroshi
74f15628dd mediatek: add support for Buffalo WSR-2533DHP2
This adds support for the Buffalo WSR-2533DHP2.

The device uses the Broadcom TRX image format with a special magic. To
be able to boot the images or load them they have to be wrapped with
different headers depending how it is loaded.

There are multiple ways to install OpenWrt on this device.
Boot ramdisk from U-Boot
----------------------------
This will load the image and not write it into the flash.

1. Stop boot menu with "space" key
2. Select "System Load Linux to SDRAM via TFTP."
3. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin
4. The system boots the image

Write to flash from U-Boot
-----------------------------
This will load the image over tftp and directly write it into the flash.

1. Stop boot menu with "space" key
2. Select "System Load Linux Kernel then write to Flash via TFTP."
3. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin
4. The system writes this image into the flash and boots into it.

Write to flash from Web UI
-----------------------------
This will load the image over over the Web UI and write it into the flash

1. Open the Web UI
2. Go to "管理" -> "ファームウェア更新"
3. Select "ローカルファイル指定" and click "更新実行"
4. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin
5. The system writes this image into the flash and boots into it.

Specifications
-------------------
* SoC:       MT7622 (4x4 2.4 GHz Wifi)
* Wifi:      MT7615 (4x4 5 GHz Wifi)
* Flash:     Winbond W29N01HZ 128MB SLC NAND
* RAM        256MB
* Ethernet:  Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s)

Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-15 17:02:17 +01:00
Hauke Mehrtens
58c5e25664 mediatek: support non standard trx magic values
Buffalo uses the TRX format with a different magic, add support for
this.

It is planned to send these patches upstream.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-15 16:57:34 +01:00
INAGAKI Hiroshi
b5b0796a13 mtd: add option for TRX magic to fixtrx
Buffalo uses the TRX header with a different magic and even changes this
magic with different devices. This change allows to specify the header
to use as a command line argument.

This is needed for the Buffalo WSR-2533DHP2 based on mt7622.

Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-15 16:57:34 +01:00
Hauke Mehrtens
4d9f69322c tools: otrx: allow own magic
This allows to specify an own magic instead of using the default magic
value TRX_MAGIC. If no own magic is specified the default one will be
used.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-15 16:57:34 +01:00
Hauke Mehrtens
cb740fbe25 mediatek: fix mtk parallel nand driver
This fixes some bugs in the mtk parallel nand driver introduced in 5.10.

This patch was send upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-15 16:57:34 +01:00
Felix Fietkau
4a79c32fee kernel: replace threaded NAPI implementation in 5.10 with upstream backport
This uses a kthread per NAPI instance instead of the workqueue approach

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-03-15 14:05:43 +01:00
Felix Fietkau
12b5f898f9 mt76: update to the latest version
6a3cf95733e2 mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
ab9045153343 mt76: mt7915: only modify tx buffer list after allocating tx token id
7e1eff676257 mt76: mt7915: fix unused 'mode' variable
8a2e22fcbf69 mt76: mt7921: fix suspend/resume sequence
27a54e8b687f mt76: mt7921: fix memory leak in mt7921_coredump_work
c267322f0bdb mt76: mt7921: switch to new api for hardware beacon filter [v2 update]
fd2c59d9ba46 mt76: mt7921: fixup rx bitrate statistics [v2 update]
bfa8d5a6a9a1 mt76: adjust to upstream API for enabling threaded NAPI
1706fb6c48e8 mt76: mt7663s: fix rx buffer refcounting
c5aca6692c41 mt76: mt7615: enable hw rx-amsdu de-aggregation
9002b0b30aed mt76: mt7615: add rx checksum offload support
8e3f5bfe74f6 mt76: mt7615: add support for rx decapsulation offload
8e3bba8bd3ef mt76: mt7615: fix memory leak in mt7615_coredump_work
760adce29100 mt76: mt7921: fix aggr length histogram
84229a51845a mt76: mt7915: fix aggr len debugfs node
10a95da23cb7 mt76: mt7921: remove unneeded semicolon
2856dc8fb57e mt76: mt7921: fix stats register definitions
1b245e57549d mt76: mt7615: fix TSF configuration
1a2e2965b62b mt76: mt7615: remove hdr->fw_ver check
f60ec1b9473d mt76: mt7615: fix mib stats counter reporting to mac80211
8a5b036af48f mt76: mt7915: fix mib stats counter reporting to mac80211
ee6dbcc64f6d mt76: connac: fix kernel warning adding monitor interface
e46dd240ce72 mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list
ddf95ead3bb3 mt76: mt7921: get rid of mt7921_sta_rc_update routine
fd2a51ea9dc8 mt76: mt7921: fix the base of PCIe interrupt
28f53d074bb0 mt76: mt7921: fix the base of the dynamic remap
8d737632b57f mt76: mt7921: check mcu returned values in mt7921_start
5ff25c915e62 mt76: mt7915: add missing capabilities for DBDC
58dd3f26c099 mt76: mt7615: fix CSA notification for DBDC
76f4959107ac mt76: mt7615: stop ext_phy queue when mac reset happens
7de0a0654054 mt76: mt7915: fix CSA notification for DBDC
e9e418fc7eb0 mt76: mt7915: stop ext_phy queue when mac reset happens
477b78301879 mt76: mt7915: fix PHY mode for DBDC
37b4dc0f7595 mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1
29a04583aecb mt76: mt7915: fix rxrate reporting
a4307e6ba054 mt76: mt7915: fix txrate reporting
256f324f8fcd mt76: mt7915: check mcu returned values in mt7915_ops
638b112188a5 mt76: mt7615: check mcu returned values in mt7615_ops
975cccfa96da mt76: mt7663: fix when beacon filter is being applied
aafe972e95b2 mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation
0d5b1a702715 mt76: mt7663s: fix the possible device hang in high traffic
00628061b546 mt76: mt7615: add missing capabilities for DBDC
2303e1844afd mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy()
6e2b9d258306 mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg
3cf5afc02955 mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure
9af9622df549 mt76: mt7921: introduce mt7921_run_firmware utility routine.
e12c44a7e165 mt76: mt7921: introduce __mt7921_start utility routine
7b56d5bf6ea0 mt76: dma: introduce mt76_dma_queue_reset routine
a80e50098b51 mt76: dma: export mt76_dma_rx_cleanup routine
e0708e296e27 mt76: mt7921: add wifi reset support
87e09e8482cf mt76: mt7921: remove leftovers from dbdc configuration
cc933b3669f7 mt76: mt7921: remove redundant check on type
ca22cc221ae7 linux-firmware: add firmware for MT7921

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-03-15 14:05:43 +01:00
Felix Fietkau
5dc5015072 mac80211: backport upstream patches for driver disconnect
Needed for an mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-03-15 14:05:43 +01:00
Andre Heider
7379f8bd3e build: prereq: drop support for Python 3.5
The final Python 3.5 release was 3.5.10 in September 2020 [0].
This release series is now End-of-Life (EOL).

The only LTS distribution that still only ships Python 3.5 is Ubuntu 16.04,
which will be EOL in April 2021 [1].

The meson build system bumped their python requirement to 3.6 for the 0.57.0
release. This patch ensures that OpenWrt can update meson while still
relying on the host python.

[0] https://www.python.org/dev/peps/pep-0478/#id4
[1] https://ubuntu.com/about/release-cycle
[2] https://mesonbuild.com/Release-notes-for-0-57-0.html#minimum-required-python-version-updated-to-36

Signed-off-by: Andre Heider <a.heider@gmail.com>
[python3.6+ in README.md]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2021-03-15 14:00:44 +01:00
Paul Spooren
bb95be9265 scripts,ipkg-build: use realpath for pkg_dir
This allows manual execution of the ipkg-build script even with
releative path.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-14 19:32:30 -10:00
Paul Spooren
72f481b157 scripts,ipkg-build: apply shellcheck
This commit cleans the `ipkg-build` script via changes suggested by
shellcheck. These are mostly word splitting issues.

Remove the definition of GZIP, this adds three "lookups" of the `gzip`
binary but the rest of the build system doesn't seem to use such
improvements neither.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-14 19:31:43 -10:00
Rosen Penev
6cd13be014 gettext-full: disable nameless locale define
It seems some packages like transmission and json-glib fail with it
enabled.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-03-14 19:25:32 -10:00
Daniel Golle
988ed00802
opkg: update to git HEAD
5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-15 00:48:42 +00:00
Daniel Golle
6a7a1f1c64
opkg: update to git HEAD
d3a63b3 libopkg: add option to strip ABI versions from listed names

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 22:55:17 +00:00
Daniel Golle
8dae189c7e
uboot-mediatek: also install production image to eMMC
Make installation to eMMC more convenient on the BPi-R64 by also
copying the production image (if valid) from SD Card to eMMC.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 22:15:47 +00:00
Daniel Golle
34adb6db1d
mediatek: mt7622: clean up image build
* clean up whitespace to make GPT partitioning more readable
 * don't select packages already part of the target default selection
 * don't select U-Boot variants (breaks ImageBuilder)
 * don't select AHCI on boards without SATA
 * don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices
   work fine with the in-SoC XHCI host having just kmod-usb3 installed.
 * select kmod-btmtkuart for devices with Bluetooth support
 * sort DEVICE_PACKAGES

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 22:00:10 +00:00
Daniel Golle
578c73fea3
uboot-mediatek: select matching U-Boot for board
Instead of building all U-Boot variants by default, build only those
needed by the selected board(s).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 22:00:05 +00:00
Daniel Golle
00a326a736
firmware-utils/ptgen: remove unused variable assignment
Discovered by coverty:

 CID 1473630:  Code maintainability issues  (UNUSED_VALUE)

 Assigning value from "type_to_guid_and_name(type, &name)" to
 "part_guid" here, but that stored value is overwritten before it can
 be used.

Remove the now redundant assignment of part_guid which is also set
conditionally later on.

Fixes: 4a078bd135 ("firmware-utils/ptgen: fix partition guid and name")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 21:59:58 +00:00
Rafał Miłecki
05dbfe616d bcm4908: use accepted 5.13 DTS patches
Some patches were slightly cleaned up. One things worth mentioning is
that adding:
phy-mode = "rgmii"
broke SF2 driver. It made it access random register breaking switch
setup.

That's why this commit also adds a quick sf2 fix.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-14 22:54:45 +01:00
Rafał Miłecki
98d456a14e bcm53xx: backport first 5.13 DTS changes
This adds NVMEM bindings that are needed for proper booting on Linksys
devices.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-14 19:11:05 +01:00
Tony Ambardar
8391781389 x86: support kernel 5.10
Add linux 5.10 as testing kernel, copy generic/subtarget configs and target
patches from 5.4.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

x86: update target patches for kernel 5.10

Refresh all patches while also dropping:
    800-hwmon-w83627ehf-dont-claim-nct677x.patch

which is now upstreamed as:
    3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support")

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

x86: refresh 5.10 target config

Refresh config using "make kernel_oldconfig".

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

x86: refresh and test all subtarget configs

Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget".

Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic.
Build-tested only: x86/geode.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
[squashed commits]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-03-14 17:52:49 +00:00
Tony Ambardar
95a3741d17 kernel: support new mdio_devres.ko module in 5.10
Add kmod-mdio-devres package and kernel config symbol, and update related
kmod-r8169 and kmod-ixgbe package dependencies.

Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-14 17:52:49 +00:00
Tony Ambardar
736edf9dea kernel: add missing config symbols for 5.10
Update generic config to add missing options that prompt during builds.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-14 17:52:49 +00:00
Álvaro Fernández Rojas
ecc058b6a0 bmips: minor ethernet driver cleanups and fixes
Add some minor ethernet driver cleanups and fixes to improve code quality.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-14 16:21:27 +01:00
Álvaro Fernández Rojas
4a81b00a05 bmips: reorganize patches
Rename and reorganize backported patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-14 16:21:27 +01:00
Hauke Mehrtens
e6ba970b6e realtek: Add ZyXEL GS1900-8
The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or
SFP ports, but otherwise similar to the other GS1900 switches.

Specifications
--------------
* Device:    ZyXEL GS1900-8 v1.2
* SoC:       Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash:     Macronix MX25L12835F 16 MiB
* RAM:       Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM
* Ethernet:  8x 10/100/1000 Mbit
* LEDs:      1 PWR LED (green, not configurable)
             1 SYS LED (green, configurable)
             8 ethernet port status LEDs (green, SoC controlled)
* Buttons:   1 on-off glide switch at the back (not configurable)
             1 reset button at the right side, behind the air-vent
               (not configurable)
             1 reset button on front panel (configurable)
* Power      12V 1A barrel connector
* UART:      1 serial header (JP2) with populated standard pin connector on
             the left side of the PCB, towards the back. Pins are labelled:
             + VCC (3.3V)
             + TX (really RX)
             + RX (really TX)
             + GND
             the labelling is done from the usb2serial connector's point of
             view, so RX/ TX are mixed up.

Serial connection parameters for both devices: 115200 8N1.

Installation
------------
Instructions are identical to those for the GS1900-10HP and GS1900-8HP.

* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
  image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
  space bar, and enable the network:
  > rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
  OEM firmware on the backup partition for the time being. OpenWrt can
  only boot off the first partition anyway (hardcoded in the DTS). To
  make sure we are manipulating the first partition, issue the following
  commands:
  > setsys bootpartition 0
  > savesys
* Download the image onto the device and boot from it:
  > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin
  > bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
  > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-14 15:07:30 +01:00
Hauke Mehrtens
c6c8d597e1 realtek: Add generic zyxel_gs1900 image definition
Add a new common device definition for the Zyxel GS1900 line of
switches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-14 15:03:00 +01:00