ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 14:13:16 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
58,285 Commits 9 Branches 74 Tags 903 MiB
520ade686b
Commit Graph

20623 Commits

Author SHA1 Message Date
Andre Heider
520ade686b ltq-vdsl-vr11-mei: fix compilation error with kernel 6.1 
Define the old PDE_DATA marco to the new pde_data function.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2023-08-27 19:26:53 +02:00
Andre Heider
63635696dc vrx518_tc: fix compilation error with kernel 6.1 
Define the old PDE_DATA marco to the new pde_data function and
conditionally use the newer APIs.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2023-08-27 19:26:53 +02:00
Andre Heider
e8e5dbc3c9 vrx518_ep: fix compilation error with kernel 6.1 
Unconditionally use the newer APIs, since our oldest supported kernel
contains them too.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2023-08-27 19:26:53 +02:00
Andre Heider
27633cefac ltq-ifxos: fix compilation error with kernel 6.1 
Conditionally use the newer APIs.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2023-08-27 19:26:53 +02:00
Antonio Flores
c0c4efe6f1 uboot-rockchip: fix swig dependency for ROCK64 
Pre build files to fix swig dependency.

Signed-off-by: Antonio Flores <antflores627@gmail.com>
 2023-08-27 19:20:11 +02:00
Antonio Flores
0405e11a71 uboot-rockchip: add support for PINE64 ROCK64 
Add uboot support for PINE64 ROCK64, rockchip rk3328 board.

Signed-off-by: Antonio Flores <antflores627@gmail.com>
 2023-08-27 19:20:11 +02:00
Zoltan HERPAI
53c2f174ad uboot-sunxi: bump to 2023.04 
Compile-tested: all boards
Runtime-tested:
 - Cortex-A8: pcDuino
 - Cortex-A7: Bananapro, Bananapi M3
 - Cortex-A53:Pine64+

Notes:
 - binman tries to add firmware for the SCP (system control processor), which
   we don't build, and is optional for the boot process on 64-bit. Disable this
   via setting the SCP envvar to /dev/null. For further info, see [1] .

[1] https://github.com/u-boot/u-boot/blob/master/board/sunxi/README.sunxi64

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
 2023-08-26 15:04:16 +02:00
Mathew McBride
d188db8aed kernel: add vhost-net module 
vhost-net is used to accelerate traffic to virtualisation
guests that use the virtio-net network card in QEMU.

Generally it is invoked by specifying "vhost=on" to a
QEMU -netdev device:

qemu-system-aarch64 -nographic -M virt -cpu host \
        --enable-kvm -bios u-boot.bin -smp 1 -m 2048 \
        -drive file=openwrt-armsr-armv8.img,format=raw,index=0,media=disk \
        -device "virtio-net,netdev=landev,disable-legacy=off,disable-modern=off" \
        -netdev "tap,id=landev,helper=/usr/lib/qemu-bridge-helper --br=br-lan,vhost=on"

Signed-off-by: Mathew McBride <matt@traverse.com.au>
 2023-08-26 14:08:10 +02:00
Robert Marko
67dacdd652 arm-trusted-firmware-mvebu: bump to v2.9 
We are using the outdated 2.7 TF-A, so lets update to current v2.9 version.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2023-08-26 00:11:48 +02:00
Robert Marko
f6ca36df84 arm-trusted-firmware-mvebu: update CM3 GCC to 12.3rel1 
We are using the outdated 11.2 GCC for CM3, lets update to the current
12.3rel1 version from ARM [1].

[1] https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2023-08-26 00:11:48 +02:00
Robert Marko
84e9d49452 arm-trusted-firmware-mvebu: bump cryptopp to version 8.8 
We are using the outdated Crypto++ version 8.5, so lets update to the
current version 8.8.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2023-08-26 00:11:48 +02:00
Robert Marko
ef82e26d35 arm-trusted-firmware-mvebu: bump mox-boot-builder to current version 
We have to move to use git clone as there are no newer tagged releases.

Changes:
604f8f5 Default CROSS_CM3 to arm-none-eabi- instead of armv7m-softfloat-eabi-
b9b9419 Tidy up license information
0290b2c wtmi: Fix typo
a10b8e9 Makefile: fix a53-firmware.bin generation (maximum size is not optimal)
f654082 wtmi: Add const qualifier to isr_vector
4a43a3b wtmi: Improve detection of ESPRESSObin boards with Topaz
189e629 wtmi: Improve detection of boards with insufficient MDIO pull-up
3dac4fe wtmi: Fix detection of Armada 3720 Devel Board
3ca4dfa Bump mox-imager commit

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2023-08-26 00:11:48 +02:00
Robert Marko
ff671d318c arm-trusted-firmware-mvebu: bump mv-ddr-marvell to current version 
Changes:
1de442d Convert floating point operations to integer operations
ce6770d Modify mv_ddr4_calibration_validate function body to match function header

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2023-08-26 00:11:48 +02:00
Robert Marko
ebbcfd095d arm-trusted-firmware-mvebu: bump a3700-utils to current version 
Changes:
a3e1c67 wtmi: Fix linker output sections
f65e3bf wtmi: Remove usage of non-existant string.h file and memcpy() function

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2023-08-26 00:11:48 +02:00
Jacob Aharon
adcd032679 mac80211: Add ath11k to the help text of ATH_DEBUG 
ATH_DEBUG package is required to debug ath11k.

Fixes: 93ae4353cd ("mac80211: add ath11k PCI support")
Signed-off-by: Jacob Aharon <ah.jacob@gmail.com>
 2023-08-25 23:56:21 +02:00
Robert Marko
96727397ef uboot-envtools: fix parallel building 
Recent envtools update to 2023.07.02 has introduced a breakage when trying
to parallel build with the following error:
/bin/sh: line 1: scripts/basic/fixdep: No such file or directory

Luckily it can easily be reproduced locally via a simple script so it was
not hard to bisect it down to upstream commit [1].

However, its not that commits fault, it just uncovered an issue with the
way we have been building envtools for a long time, maybe even from the
package introduction.

The issue is that we are trying to build envtools as one of the U-Boot
no-dot-config-targets but envtools was newer a valid target for it but
since we were creating the config headers that were not actually used it
was actually building all this time.

Since the blamed commit [1] a tool called printinitialenv is built and
now a proper config is actually required in order for prerequisites to
get built properly.

So, in order to properly fix this (Hopefully for good) lets stop pretending
that envtools are a valid no-dot-config-targets target and use the
tools-only defconfig which is meant exactly for just building the tools.
This will make a minimal config for the U-Boot sandbox target and then
envtools will build just fine in parallel mode (I tested with 32 threads).
We do hovewer need to override the ARCH passed by OpenWrt and set it to
sandbox as otherwise U-Boot will not find the required headers because the
ARCH is being overriden to an incorrect one.

[1] 40b77f2a3a

Fixes: 9db0330052 ("uboot-envtools: update to 2023.07.02")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2023-08-25 23:38:11 +02:00
Felix Fietkau
6b3737be32 mt76: update to the latest version 
bdf7ca5db707 wifi: mt76: mt7921: move common register definition in mt792x_regs.h
ae15d5c6b567 wifi: mt76: mt7921: convert acpisar and clc pointers to void
02515b6b90f0 wifi: mt76: mt7921: rename mt7921_vif in mt792x_vif
6ed8a8bdc7b6 wifi: mt76: mt7921: rename mt7921_sta in mt792x_sta
80234e64e7c5 wifi: mt76: mt7921: rename mt7921_phy in mt792x_phy
2485b4222d3d wifi: mt76: mt7921: rename mt7921_dev in mt792x_dev
c6fd7cde77e0 wifi: mt76: mt7921: rename mt7921_hif_ops in mt792x_hif_ops
1a1a57b5f8c4 wifi: mt76: mt792x: move shared structure definition in mt792x.h
68508aab4241 wifi: mt76: mt7921: move mt792x_mutex_{acquire/release} in mt792x.h
ff306af07e65 wifi: mt76: mt7921: move mt792x_hw_dev in mt792x.h
4b49d659acab wifi: mt76: mt7921: Replace fake flex-arrays with flexible-array members
93f821cce8f5 wifi: mt76: mt792x: introduce mt792x-lib module
de7b90721280 wifi: mt76: mt7921: move mac shared code in mt792x-lib module
c68ee8a64bef wifi: mt76: mt7921: move dma shared code in mt792x-lib module
8d561811f271 wifi: mt76: mt7921: move debugfs shared code in mt792x-lib module
0034ae289046 wifi: mt76: mt7921: move init shared code in mt792x-lib module
8419c4e793a7 wifi: mt76: mt792x: introduce mt792x_irq_map
b7c7fadf228c wifi: mt76: mt792x: move more dma shared code in mt792x_dma
0b1603ce707c wifi: mt76: mt7921: move hif_ops macro in mt792x.h
e07540abe87a wifi: mt76: mt7921: move shared runtime-pm code on mt792x-lib
3d65cd7a8dad wifi: mt76: mt7921: move runtime-pm pci code in mt792x-lib
4551f8c838e6 wifi: mt76: mt7921: move acpi_sar code in mt792x-lib module
bd84b8ebaff8 wifi: mt76: mt792x: introduce mt792x-usb module
7067ea0f1bab wifi: mt76: mt792x: move mt7921_load_firmware in mt792x-lib module
cf752af84c35 wifi: mt76: mt76_connac3: move lmac queue enumeration in mt76_connac3_mac.h
700041dcf773 wifi: mt76: mt792x: move MT7921_PM_TIMEOUT and MT7921_HW_SCAN_TIMEOUT in common code
58b2b90ad89b wifi: mt76: mt7921: move mt7921_dma_init in pci.c
9e4cb87a04cf wifi: mt76: mt7921: move mt7921u_disconnect mt792x-lib
c19b62fe6b68 wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH
4904ab2f87cd wifi: mt76: fix return value check in mt76x02_mac_process_rx
1f0fbbee359c wifi: mt76: mt7915: fix tlv length of mt7915_mcu_get_chan_mib_info
24a54ee3a5ec wifi: mt76: mt7915: fix power-limits while chan_switch
80b8bcf0e3ea wifi: mt76: mt7603: rework/fix rx pse hang check
a8d9553d8fc4 wifi: mt76: mt7603: improve watchdog reset reliablity
c03d84c0d018 wifi: mt76: mt7603: improve stuck beacon handling
85cc58378d25 wifi: mt76: mt7603: add missing register initialization for MT7628
b14c2351ddb8 wifi: mt76: mt7603: disable A-MSDU tx support on MT7628

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-25 21:28:36 +02:00
Daniel Golle
ff2379662c uboot-mediatek: increase max. memory regions on mt7988-rfb 
WED requires a bunch of additional reserved memory regions. As U-Boot's
LMB allocator defaults to a maximum of only 8 regions, this currently
makes using WED impossible.
Raise LMB_MAX_REGIONS to 64 just like for all other MediaTek boards
with a SoC supporting WED.

Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2023-08-24 18:49:49 +01:00
Felix Fietkau
22ca6fdeeb hostapd: fix bringing up AP+STA when the new channel is on a DFS channel 
If a CAC is needed because the channel is not available yet, a full AP
interface restart is needed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-24 18:29:36 +02:00
Felix Fietkau
f3eb998e7e hostapd: in AP/STA, shut down AP interfaces when STA enters scanning state 
When the STA is brought up, it is set to DISABLED before adding the bss to ucode,
so the first trigger to disable the AP is missed.

Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-23 19:05:47 +02:00
Felix Fietkau
aa5f2cb63c hostapd: remove obsolete patch 
It was only needed when hostapd was being started with one instance per PHY

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-23 19:05:46 +02:00
Shiji Yang
ce6ad123e7 mac80211: fix MT7620 Wi-Fi channel scanning function 
During the channel scanning process, the driver will continuously
switch channels. It seems that the full RF calibration step in
rt2800_config_channel() caused the channel scanning function to
timeout. To fix it, move the RF calibration to rt2800_enable_radio()
so that it is only executed once. This commit also includes some
coding format adjustments to follow the Linux recommended style.

Fixes: 2824fa6963 ("mac80211: rework MT7620 PA/LNA RF calibration")
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2023-08-22 19:17:24 +01:00
Stefan Agner
4af06aaf33 mediatek: filogic: wax220: cleanup device tree 
Fix compatible string to match what is supported upstream, fix alignment
and order MTD partitions according to offset.

Signed-off-by: Stefan Agner <stefan@agner.ch>
 2023-08-22 13:37:27 +02:00
David Bauer
c46df4f1e2 hostapd: allow reduced neighbor report configuration 
Reduced neighbor reports can be enabled by setting the "rnr" uci option
to 1.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2023-08-22 13:37:27 +02:00
Linus Walleij
f2a8763587 uboot-bcm53xx: Add U-Boot for NorthStar BCM53xx 
I recently added support for the NorthStar ARM BCM53xx SoCs
to the upstream U-Boot. This is a back port on top of the
2023.04 version already imported to OpenWrt with the 5 necessary
upstream patches.

This is needed to create a small U-Boot for the BCM53xx-based
D-Link DIR-890L and I think also the DIR-885L, so that a
recent (bigger) kernel can be loaded and executed from the
SEAMA partitions on these devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2023-08-20 18:08:13 +02:00
Bjørn Mork
6cc14bf66a filogic: support Telenor branded ZyXEL EX5700 
Telenor quirks
--------------
The operator specific firmware running on the Telenor branded
ZyXEL EX5700 includes U-Boot modifications affecting the OpenWrt
installation.

Notable changes to U-Boot include
- environment is stored in RAM and reset to defaults when power
  cycled
- dual partition scheme with "nomimal" or "rescue" systems, falling
  back to "rescue" unless the OS signals success in 3 attempts
- several runtime additions to the device-tree

Some of these modifications have side effects requiring workarounds
- U-Boot modifies /chosen/bootargs in an unsafe manner, and will crash
  unless this node exists
- U-Boot verifies that the selected rootfs UBI volume exists, and
  refuses to boot if it doesn't. The chosen "rootfs" volume must contain
  a squashfs signature even for tftp or initramfs booting.
- U-Boot parses the "factoryparams" UBI volume, setting the "ethaddr"
  variable to the label mac.  But "factoryparams" does not always
  exist.  Instead there is a "RIP" volume containing all the factory
  data.  Copying the "RIP" volume to  "factoryparams" will fix this

Hardware
--------
SOC:   MediaTek MT7986
RAM:   1GB DDR4
FLASH: 512MB SPI-NAND (Mikron xxx)
WIFI:  Mediatek MT7986 802.11ax 5 GHz
       Mediatek MT7916 DBDC 802.11ax 2.4 + 6 GHz
ETH:   MediaTek MT7531 Switch + SoC
       3 x builtin 1G phy (lan1, lan2, lan3)
       2 x MaxLinear GPY211C 2.5 N-Base-T phy (lan4, wan)
USB:   1 x USB 3.2 Enhanced SuperSpeed port
UART:  3V3 115200 8N1 (Pinout: GND KEY RX TX VCC)

Installation
------------
1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
   reachable at 192.168.1.2/24. Rename the image to C0A80101.img.

2. Connect the TFTP server to lan1, lan2 or lan3. Connect to the serial
   console, Interrupt the autoboot process by pressing ESC when prompted.

3. Download and boot the OpenWrt initramfs image.

   $ env set uboot_bootcount 0
   $ env set firmware nominal
   $ tftpboot
   $ bootm

4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
   using scp and install using sysupgrade.

   $ sysupgrade -n <path-to-sysupgrade.bin>

Missing features
----------------

- The "lan1", "lan2" and "lan3" port LEDs are driven by the switch but
  OpenWrt does not correctly configure the output.
- The "lan4" and "wan" port LEDs are driven by the GPH211C phys and
  not configured by OpenWrt.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
 2023-08-20 01:14:06 +02:00
Bjørn Mork
b2e810f495 kernel: ubootenv-nvram: driver for RAM backed environments 
The vendor U-Boot implementaion on Telenor branded ZyXEL EX5700
devices does not store its environment on flash. It is instead
kept in a memory region.  This is persistent over reboots, but
not over power cycling.

The dual partition failsafe system used by the vendor U-Boot
requires the OS to modify a variable in this memory environment.
This driver allows the ordinary uboot-envtools to access a
memory region like it was a partition on NOR flash.

The specific vendor U-Boot adds a "no-map" /reserved-memory
section and a top level /ubootenv node pointing to the memory
environment.  The driver uses this device specific fact to
locate the region.  The matching and probing code will likely
have to be adjusted for any other devices to be supported.

Example partial device tree:

 / {
    ..
    ubootenv {
        memory-region = <&uenv>;
        compatible = "ubootenv";
    };
    ..
    reserved-memory {
        ..
        uenv: ubootenv@7ffe8000 {
            no-map;
            reg = <0 0x7ffe8000 0 0x4000>;
        };

Signed-off-by: Bjørn Mork <bjorn@mork.no>
 2023-08-20 01:14:06 +02:00
Thomas Kupper
4d79a65d60 ipq807x: add support for Netgear RAX120v2 
Netgear Nighthawk RAX120v2 AX WIFI router with 5 1G and 1 5G ports.

The majority of the code is based on @jewwest's PR #11830.

Specifications:
    * CPU: Qualcomm IPQ8074 Quad core Cortex-A53 2.2GHz
    * RAM: 1024MB of DDR3 (Nanya NT5CC256M16EP-EK × 2)
    * Flash: SPI-NAND 512 MiB (Winbond W29N04GZBIBA)
    * Ethernet: 4x 10/100/1000 Mbps LAN,
                1x 10/100/1000 Mbps WAN (Qualcomm QCA8075),
                1x 10/100/1000/2500/5000 Mbps LAN/WAN (Aquantia AQR111B0 PHY)
    * Wi-Fi:
        * 2.4 GHz: Qualcomm QCN5024 4x4
        * 2x 5 GHz: Qualcomm QCN5054 4x4
    * USB: 2x USB 3.0
    * LEDs: Power, 2.4GHz & 5GHz Radio, WPS, WAN, USB1 & USB2, 5G LAN
    * Keys: LEDs On/Off, Power, Reset, RFKILL, WPS
    * UART: Marked J9003 VCC TX RX GND, beginning from "1". 3.3v, 115200n8
    * Power: 19 VDC, 3.1 A

Installation:
    * Flashing OpenWrt is done in two steps:
        a) Flash *-squashfs-web-ui-factory.img from stock UI (thanks to @wangyu-).
           This writes an initramfs based OpenWrt image onto the RAX120v2
        b) From OpenWrt flash the *-squashfs-sysupgrade.bin using LuCI or the commandline

    * U-Boot allows booting an initramfs image via TFTP:
    - Set ip of your PC to 192.168.1.100
        - At the serial console interrupt boot at "Hit any key to stop autoboot:"
        - In u-boot run `tftpsrv`
        - On your PC send the OpenWrt initramfs image:

          tftp 192.168.1.1 -m binary -c put openwrt-ipq807x-generic-netgear_rax120v2-initramfs-uImage.itb

Make 5G Aquantia phy work:
    For the 5G port labeled 'lan5' to work a firmware is needed. This can be loaded in
    u-boot by writing the firmware to the correct mtd partition.

    The firmware file found in the Netgear stock firmware under /lib/firmware/ named
    'AQR-G3_v4.3.C-AQR_DNI_DR-EQ35AX8-R-prov1_ID23888_VER1311.cld' is needed and has to
    be converted to a MBN file.

    The `mkheader.py` script used here can be found in the Netgear V1.2.8.40 GPL source,
    under 'git_home/u-boot.git/tools/mkheader.py'

    Convert the CLD file to MBN using:
    $ python2 mkheader.py 0x44000000 0x13 <*.cld file> aqr_4.3.C.mbn

    This MBN file can then be flashed to the MTD partition to be used by u-boot.

    The necessary files can also be found in
        https://github.com/boretom/openwrt-fork/tree/rax120v2/aquantia-firmware

    * Write MBN file to MTD partition to be loaded automatically by u-boot:

      U-boot automatically tries to load the firmware from nand at address 0x7e00000 which
      corresponds to `/dev/mtd25` in OpenWrt.

        - find ETHPHYFW partition while running OpenWrt (expected: /dev/mtd25)

          $ fgrep -i 'ethphyfw' /proc/mtd
          mtd25: 00080000 00020000 "ethphyfw

        - copy mbn file to /tmp/ folder of the router

          $ scp aqr-v4.3.C.mbn 192.168.1.1:/tmp/

        - write mbn file to ethphyfw partition

          $ mtd write /tmp/aqr_v4.3.C.mbn /dev/mtd25

Revert to stock firmware:
    * Flash the stock firmware to the bootloader using TFTP/NMRP.

References to RAX120v2 GPL source:
    https://www.downloads.netgear.com/files/GPL/RAX120-V1.2.8.40_gpl_src.zip

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
 2023-08-19 17:12:46 +02:00
John Thomson
c123e4f053 rtl8812au-ct: bump to fix kernel 6.1 compile 
9b2b203 fix usb_recv_tasklet -Wcast-function-type
 a027da5 fix kernel 6.1 80211 link_id
 7a9c802 fix build for kernel 6.1 prandom
 3a3eb24 fix build for kernel 5.17 PDE_DATA
 fe2afbd fix build for kernel 5.17 const netdev->dev_addr
 7275bae fix build for 5.17 kernel complete_and_exit
 c9c2aa7 Update usb_intf.c

revert the upstream 6.1 link_id (depend on kernel version) changes and
force 6.1 link_id

The downstream patch casting const off the direct dev_addr writes
triggers the runtime check from
Linux d07b26f5bbea ("dev_addr: add a modification check")

Fixes: #13261
Fixes: a07566ead8 ("rtl8812au-ct: fix even more compilation error with kernel 6.1")

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
 2023-08-19 16:38:48 +02:00
Arınç ÜNAL
c46ac89ec6 packages: nvram: add asus,rt-ac3100 to set_wireless_led_behaviour quirk 
Add ASUS RT-AC3100 to the set wireless LED behaviour quirk.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
 2023-08-19 11:03:11 +02:00
Stijn Tintel
324673914d hostapd: revert upstream commit to fix #13156 
Commit e978072baaca ("Do prune_association only after the STA is
authorized") causes issues when an STA roams from one interface to
another interface on the same PHY. The mt7915 driver is not able to
handle this properly. While the commits fixes a DoS, there are other
devices and drivers with the same limitation, so revert to the orginal
behavior for now, until we have a better solution in place.

Fixes: #13156
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 2023-08-18 23:45:16 +02:00
Felix Fietkau
a61fd0f0bb hostapd: fix bringing up mesh without supplicant when mcast rate is specified 
The iw command expects a specific command line argument

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-17 17:44:59 +02:00
Felix Fietkau
09fd59938b netifd: update to the latest version 
4711f74479e2 netifd: fix disabling radio via config if reconf is being used

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-17 17:14:59 +02:00
Hauke Mehrtens
e0ea79f3f5 kernel: netsupport: kmod-sched: Add act_skbmod 
This adds act_skbmod.ko to kmod-sched.

Fixes: #13224
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2023-08-15 16:11:45 +02:00
Stefan Kalscheuer
9db0330052 uboot-envtools: update to 2023.07.02 
Update to the latest stable version.

This update changes the default lockfile directory from /var/lock to
/run [1]. In OpenWRT we still use the "legacy" /var/lock and /run might
not even exist, so we add a patch to revert this particular change.

[1] aeb40f1166

Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
 2023-08-15 16:08:55 +02:00
Ivan Pavlov
a87bc138cf uboot-envtools: add u-boot env config for Xiaomi mi-mini 
Add u-boot env config for Xiaomi mi-mini for using fw_printenv and fw_setenv on this board

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
 2023-08-14 20:08:05 +02:00
Hauke Mehrtens
00ce1c0587 linux-firmware: Update Intel AX200 and AX210 firmware 
This updates the Intel iwlwifi firmware for AX200 and AX210 from version
66 to version 72. Version 72 is the latest version supported by iwlwifi
from kernel 6.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
 2023-08-14 19:08:02 +02:00
Daniel Golle
3c2f7bb555 uboot-mediatek: bpi-r3: prepare for larger FIT structures 
Instead of reading only a single 4kiB page, read the first 128kiB to
determine the size of an uImage.FIT using 'imsz' or 'imszb'.
This will be needed once we add more Device Tree Overlays, which may
happen for the BPi-R3 mini.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2023-08-13 15:01:36 +01:00
Felix Fietkau
16c37ba913 arm-trusted-firmware-tools: fix build on macOS/Darwin 
Resolve conflicts with the uuid type from darwin system headers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-12 16:45:47 +02:00
Felix Fietkau
a0a5b97674 hostapd: do not store data in object prototype 
It cannot be properly cloned, since it is attached to the resource type.
Use a separate registry for data. Fixes object confusion issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-12 08:42:12 +02:00
Felix Fietkau
f1c4751ba6 hostapd: restart wifi when the bssid of the first interface changes 
Full restart is necessary, since the bss wdev is not re-created

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-11 23:29:22 +02:00
Felix Fietkau
c1600df91f hostapd: shut down client mode on the same phy while restarting AP 
An active client mode interface could prevent the AP from claiming its channel
and mess up the bringup sequence order

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-11 23:29:22 +02:00
Zoltan HERPAI
80edfaf675 sunxi: add support for Banana Pi M3 
CPU	Allwinner A83t Octa-core Cortex A7 @ 1.2GHz
Memory  2Gb DDR3
Storage	SDcard, SATA (via USB), 8GB eMMC
Network	10/100/1000M ethernet, Ampak AP6212 wifi + BT
USB	2x USB 2.0

Flashing instructions:
 Standard sunxi SD card installation procedure - copy image to SD card,
 insert into SD card slot on the device and boot.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
 2023-08-11 18:04:44 +02:00
Felix Fietkau
c5988f4c01 hostapd: fix center frequency calculation for channel 149 and above 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-11 15:43:43 +02:00
Hauke Mehrtens
ced2854871 firmware: intel-microcode: update to 20230808 
Debian changelog:

intel-microcode (3.20230808.1) unstable; urgency=high

  * New upstream microcode datafile 20230808 (closes: #1043305)
    Mitigations for "Downfall" INTEL-SA-00828 (CVE-2022-40982),
    INTEL-SA-00836 (CVE-2023-23908) and INTEL-SA-00837 (CVE-2022-41804)
    * Updated microcodes:
      sig 0x00050653, pf_mask 0x97, 2023-03-23, rev 0x1000181, size 36864
      sig 0x00050654, pf_mask 0xb7, 2023-03-06, rev 0x2007006, size 44032
      sig 0x00050656, pf_mask 0xbf, 2023-03-17, rev 0x4003604, size 38912
      sig 0x00050657, pf_mask 0xbf, 2023-03-17, rev 0x5003604, size 38912
      sig 0x0005065b, pf_mask 0xbf, 2023-03-21, rev 0x7002703, size 30720
      sig 0x000606a6, pf_mask 0x87, 2023-03-30, rev 0xd0003a5, size 297984
      sig 0x000706e5, pf_mask 0x80, 2023-02-26, rev 0x00bc, size 113664
      sig 0x000806c1, pf_mask 0x80, 2023-02-27, rev 0x00ac, size 111616
      sig 0x000806c2, pf_mask 0xc2, 2023-02-27, rev 0x002c, size 98304
      sig 0x000806d1, pf_mask 0xc2, 2023-02-27, rev 0x0046, size 103424
      sig 0x000806e9, pf_mask 0xc0, 2023-02-22, rev 0x00f4, size 106496
      sig 0x000806e9, pf_mask 0x10, 2023-02-23, rev 0x00f4, size 105472
      sig 0x000806ea, pf_mask 0xc0, 2023-02-23, rev 0x00f4, size 105472
      sig 0x000806eb, pf_mask 0xd0, 2023-02-23, rev 0x00f4, size 106496
      sig 0x000806ec, pf_mask 0x94, 2023-02-26, rev 0x00f8, size 106496
      sig 0x000806f8, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1, size 572416
      sig 0x000806f7, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
      sig 0x000806f6, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
      sig 0x000806f5, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
      sig 0x000806f4, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
      sig 0x000806f8, pf_mask 0x10, 2023-05-15, rev 0x2c000271, size 605184
      sig 0x000806f6, pf_mask 0x10, 2023-05-15, rev 0x2c000271
      sig 0x000806f5, pf_mask 0x10, 2023-05-15, rev 0x2c000271
      sig 0x000806f4, pf_mask 0x10, 2023-05-15, rev 0x2c000271
      sig 0x00090672, pf_mask 0x07, 2023-04-18, rev 0x002e, size 220160
      sig 0x00090675, pf_mask 0x07, 2023-04-18, rev 0x002e
      sig 0x000b06f2, pf_mask 0x07, 2023-04-18, rev 0x002e
      sig 0x000b06f5, pf_mask 0x07, 2023-04-18, rev 0x002e
      sig 0x000906a3, pf_mask 0x80, 2023-04-18, rev 0x042c, size 219136
      sig 0x000906a4, pf_mask 0x80, 2023-04-18, rev 0x042c
      sig 0x000906e9, pf_mask 0x2a, 2023-02-23, rev 0x00f4, size 108544
      sig 0x000906ea, pf_mask 0x22, 2023-02-23, rev 0x00f4, size 104448
      sig 0x000906eb, pf_mask 0x02, 2023-02-23, rev 0x00f4, size 106496
      sig 0x000906ec, pf_mask 0x22, 2023-02-23, rev 0x00f4, size 105472
      sig 0x000906ed, pf_mask 0x22, 2023-02-27, rev 0x00fa, size 106496
      sig 0x000a0652, pf_mask 0x20, 2023-02-23, rev 0x00f8, size 97280
      sig 0x000a0653, pf_mask 0x22, 2023-02-23, rev 0x00f8, size 97280
      sig 0x000a0655, pf_mask 0x22, 2023-02-23, rev 0x00f8, size 97280
      sig 0x000a0660, pf_mask 0x80, 2023-02-23, rev 0x00f8, size 97280
      sig 0x000a0661, pf_mask 0x80, 2023-02-23, rev 0x00f8, size 96256
      sig 0x000a0671, pf_mask 0x02, 2023-02-26, rev 0x0059, size 104448
      sig 0x000b0671, pf_mask 0x32, 2023-06-06, rev 0x0119, size 210944
      sig 0x000b06a2, pf_mask 0xe0, 2023-06-06, rev 0x4119, size 216064
      sig 0x000b06a3, pf_mask 0xe0, 2023-06-06, rev 0x4119
      sig 0x000b06e0, pf_mask 0x11, 2023-04-12, rev 0x0011, size 136192
  * source: update symlinks to reflect id of the latest release, 20230808

intel-microcode (3.20230512.1) unstable; urgency=medium

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2023-08-11 11:40:15 +02:00
Hauke Mehrtens
bfbb5ccf7a linux-firmware: update to 20230804 
7be2766 (tag: 20230804) Merge branch 'rb3-update' of https://github.com/lumag/linux-firmware
66c1db8 Merge https://github.com/pkshih/linux-firmware
5046942 Mellanox: Add new mlxsw_spectrum firmware xx.2012.1012
5c7b67f linux-firmware: Add URL for latest FW binaries for NXP BT chipsets
29f185d rtw89: 8851b: update firmware to v0.29.41.1
742bf57 qcom: sdm845: add RB3 sensors DSP firmware
253cc17 amdgpu: Update DMCUB for DCN314 & Yellow Carp
07f05b0 Merge branch 'dmc-adlp_2.20-mtl_2.13' of git://anongit.freedesktop.org/drm/drm-firmware
5a251ed Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
6c8ce49 ice: add LAG-supporting DDP package
fd6e13c i915: Update MTL DMC to v2.13
41e615c i915: Update ADLP DMC to v2.20
c8424cf cirrus: Add CS35L41 firmware for Dell Oasis Models
b6ea35f copy-firmware: Fix linking directories when using compression
0a51959 copy-firmware: Fix test: unexpected operator
b602d43 qcom: sc8280xp: LENOVO: remove directory sym link
e0bad5e qcom: sc8280xp: LENOVO: Remove execute bits
59fbffa amdgpu: update VCN 4.0.0 firmware
22fb12f amdgpu: add initial SMU 13.0.10 firmware
b3f512f amdgpu: add initial SDMA 6.0.3 firmware
b1a7d76 amdgpu: add initial PSP 13.0.10 firmware
d6d655a amdgpu: add initial GC 11.0.3 firmware
c782458 Merge branch 'v2.0.21961' of https://github.com/yunfei-mtk/linux_fw_10bit
ca9086f Merge branch 'dg2_mtl_guc_70.8' of git://anongit.freedesktop.org/drm/drm-firmware
0bc3126 linux-firmware: Update AMD fam17h cpu microcode
b250b32 linux-firmware: Update AMD cpu microcode
9dfcace amdgpu: update green sardine VCN firmware
b519832 amdgpu: update renoir VCN firmware
5f569aa amdgpu: update raven VCN firmware
868bb36 amdgpu: update raven2 VCN firmware
6fa9a17 amdgpu: update Picasso VCN firmware
cd52460 amdgpu: update DMCUB to v0.0.175.0 for various AMDGPU ASICs
4ef7581 Updated NXP SR150 UWB firmware
2514504 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
45f5ebf wfx: update to firmware 3.16.1
f41d890 mediatek: Update mt8195 SCP firmware to support 10bit mode
6f3a37f i915: update DG2 GuC to v70.8.0
0ee23bd i915: update to GuC 70.8.0 and HuC 8.5.1 for MTL
1a76e8b cirrus: Add CS35L41 firmware for ASUS ROG 2023 Models
d3f6606 Partially revert "amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5"
8917650 linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
7d9af09 linux-firmware: update firmware for MT7922 WiFi device
0bab5df Merge tag 'iwlwifi-fw-2023-06-29' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
3ec3817 linux-firmware: Update firmware file for Intel Bluetooth AX203
7db3ef9 linux-firmware: Update firmware file for Intel Bluetooth AX203
5684048 linux-firmware: Update firmware file for Intel Bluetooth AX211
3f7a24e linux-firmware: Update firmware file for Intel Bluetooth AX211
eb2c745 linux-firmware: Update firmware file for Intel Bluetooth AX210
4a3ff0a linux-firmware: Update firmware file for Intel Bluetooth AX200
1d1bad4 linux-firmware: Update firmware file for Intel Bluetooth AX201
db39dff Fix qcom ASoC tglp WHENCE entry
a687f89 Merge branch 'sc8280xp-audio-fw' of git://git.kernel.org/pub/scm/linux/kernel/git/srini/linux-firmware
9e0343c check_whence: Check link targets are valid
b255f5b iwlwifi: add new FWs from core80-39 release
fa5d30b iwlwifi: update cc/Qu/QuZ firmwares for core80-39 release
f9a35b3 qcom: Add Audio firmware for SC8280XP X13s

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2023-08-11 11:04:37 +02:00
Hauke Mehrtens
d773fe5411 mbedtls: Update to version 2.28.4 
This only fixes minor problems.
Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.4

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2023-08-11 11:03:08 +02:00
Felix Fietkau
9c2c6d19f3 hostapd: add missing #ifdef for non-802.11ax builds 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-11 07:10:23 +02:00
Hauke Mehrtens
d1427863ba uci: update to git HEAD 
3cda251 file: Fix uci -m import command
5781664 remove internal usage of redundant uci_ptr.last

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2023-08-10 23:09:37 +02:00
Felix Fietkau
847984c773 hostapd: reimplement AP/STA support via ucode 
Drop obsolete control interface patches.
This fixes some corner cases in the previous code where the segment 0 center
frequency was not adjusted properly, leading to logspam and non-working AP
interfaces.
Additionally, shutting down the AP was broken, because the next beacon update
would re-enable it, leading to a race condition on assoc.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-08-10 22:33:00 +02:00