5 Commits

Author	SHA1	Message	Date
Rosen Penev	3395184825	ramips: mt7621: nix mac-address-increment ... nvmem-layout allows removal Signed-off-by: Rosen Penev <rosenp@gmail.com>	2023-11-26 01:30:32 +01:00
Rosen Penev	f4c33d098f	ramips: mt7621: convert to nvmem-layout ... Allows replacing mac-address-increment with mac-base. Signed-off-by: Rosen Penev <rosenp@gmail.com>	2023-11-26 01:30:32 +01:00
Shiji Yang	65cd6a6fec	ramips: convert MT7613 and MT7615 EEPROM to NVMEM format for MT7621 ... This patch converts MT7613 and MT7615 WiFi calibration data to NVMEM format. The EEPROM size is 0x4da8. Signed-off-by: Shiji Yang <yangshiji66@qq.com>	2023-10-09 11:15:52 +02:00
Felix Baumann	d87482a8db	ramips: fix dts whitespace ... Replace blanks with tabs Remove whitespace from otherwise empty lines Signed-off-by: Felix Baumann <felix.bau@gmx.de>	2023-02-09 03:03:52 +01:00
Ivaylo Ivanov	6afc355b2e	ramips: Add support for D-Link DIR-3060 A1 ... Hardware specification: SoC: MediaTek MT7621AT Flash: Winbond W29N01HVSINA 128MB RAM: Micron MT41K128M16JT-125 256MB Ethernet: 4x 10/100/1000 Mbps WiFi1: MT7615DN 2.4GHz N 2x2:2 WiFi2: MT7615DN 5GHz AC 2x2:2 WiFi3: MT7615N 5GHz AC 4x4:4 Button: WPS, Reset Flash instructions: OpenWrt can be installed via D-Link Recovery GUI: Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. Give it ~30 seconds, to boot the recovery mode GUI Connect your client computer to LAN1 of the device Set your client IP address manually to 192.168.0.2 / 255.255.255.0. Call the recovery page for the device at http://192.168.0.1/ Use the provided emergency web GUI to upload and flash a new firmware to the device Signed-off-by: Ivaylo Ivanov <iivailo@mail.bg>	2022-11-13 22:36:06 +01:00