mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-15 15:07:11 +00:00
ramips: Add support for D-Link DIR-3060 A1
Hardware specification:
SoC: MediaTek MT7621AT
Flash: Winbond W29N01HVSINA 128MB
RAM: Micron MT41K128M16JT-125 256MB
Ethernet: 4x 10/100/1000 Mbps
WiFi1: MT7615DN 2.4GHz N 2x2:2
WiFi2: MT7615DN 5GHz AC 2x2:2
WiFi3: MT7615N 5GHz AC 4x4:4
Button: WPS, Reset
Flash instructions:
OpenWrt can be installed via D-Link Recovery GUI:
Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable.
Give it ~30 seconds, to boot the recovery mode GUI
Connect your client computer to LAN1 of the device
Set your client IP address manually to 192.168.0.2 / 255.255.255.0.
Call the recovery page for the device at http://192.168.0.1/
Use the provided emergency web GUI to upload and flash a new firmware to the device
Signed-off-by: Ivaylo Ivanov <iivailo@mail.bg>
This commit is contained in:
Ivaylo Ivanov
Hauke Mehrtens
parent
794d1645b3
commit
6afc355b2e
241
target/linux/ramips/dts/mt7621_dlink_dir-3060-a1.dts
Normal file
241
target/linux/ramips/dts/mt7621_dlink_dir-3060-a1.dts
Normal file
@ -0,0 +1,241 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dir-3060-a1", "mediatek,mt7621-soc";
|
||||
model = "D-Link DIR-3060 A1";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_power_orange;
|
||||
led-failsafe = &led_power_white;
|
||||
led-running = &led_power_white;
|
||||
led-upgrade = &led_net_orange;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "orange:power";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_white: power_white {
|
||||
label = "white:power";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_net_orange: net_orange {
|
||||
label = "orange:net";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
net_white {
|
||||
label = "white:net";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb2_white {
|
||||
label = "white:usb2";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&ehci_port2>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
usb3_white {
|
||||
label = "white:usb3";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&xhci_ehci_port1>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "white:wlan2g";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wlan5glb {
|
||||
label = "white:wlan5glb";
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
|
||||
wlan5ghb {
|
||||
label = "white:wlan5ghb";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy2radio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "config";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@100000 {
|
||||
label = "factory";
|
||||
reg = <0x100000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "config2";
|
||||
reg = <0x140000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "firmware";
|
||||
compatible = "openwrt,uimage", "denx,uimage";
|
||||
openwrt,padding = <96>;
|
||||
reg = <0x180000 0x2800000>;
|
||||
};
|
||||
|
||||
partition@2980000 {
|
||||
label = "private";
|
||||
reg = <0x2980000 0x2000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4980000 {
|
||||
label = "firmware2";
|
||||
reg = <0x4980000 0x2800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7180000 {
|
||||
label = "mydlink";
|
||||
reg = <0x7180000 0x600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7780000 {
|
||||
label = "reserved";
|
||||
reg = <0x7780000 0x880000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi0: wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
ieee80211-freq-limit = <2400000 6000000>;
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi1: wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
nvmem-cells = <&macaddr_factory_e006>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "uart3", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_e000: macaddr@e000 {
|
||||
reg = <0xe000 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_e006: macaddr@e006 {
|
||||
reg = <0xe006 0x6>;
|
||||
};
|
||||
};
|
||||
@ -547,6 +547,13 @@ define Device/dlink_dir-2660-a1
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-2660-a1
|
||||
|
||||
define Device/dlink_dir-3060-a1
|
||||
$(Device/dlink_dir-xx60-a1)
|
||||
DEVICE_MODEL := DIR-3060
|
||||
DEVICE_VARIANT := A1
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-3060-a1
|
||||
|
||||
define Device/dlink_dir-853-a3
|
||||
$(Device/dlink_dir-xx60-a1)
|
||||
DEVICE_MODEL := DIR-853
|
||||
|
||||
@ -55,6 +55,10 @@ dlink,dir-2640-a1|\
|
||||
dlink,dir-2660-a1)
|
||||
ucidef_set_led_netdev "wan" "wan" "white:net" "wan"
|
||||
;;
|
||||
dlink,dir-3060-a1)
|
||||
ucidef_set_led_netdev "net_white" "WAN Link" "white:net" "wan" "link"
|
||||
ucidef_set_led_netdev "net_orange" "WAN Activity" "orange:net" "wan" "tx rx"
|
||||
;;
|
||||
dlink,dir-853-a3)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:net" "wan"
|
||||
;;
|
||||
|
||||
@ -62,6 +62,7 @@ platform_do_upgrade() {
|
||||
dlink,dir-1960-a1|\
|
||||
dlink,dir-2640-a1|\
|
||||
dlink,dir-2660-a1|\
|
||||
dlink,dir-3060-a1|\
|
||||
dlink,dir-853-a3|\
|
||||
h3c,tx1800-plus|\
|
||||
h3c,tx1801-plus|\
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user