dnsmasq's dnssec time checking method now uses a ntp hotplug mechanism,
therefore dnsmasq.time is redudant and no longer needs to be explicitly
excluded from sysfixtime.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Change dnsmasq's dnssec time check handling to use time validity
indicated by ntpd rather than maintaining a cross boot/upgrade
/etc/dnsmasq.time timestamp file. This saves flash device wear.
If ntpd client is configured in uci and you're using dnssec, then
dnsmasq will not check dnssec timestamp validity until ntpd hotplug
indicates sync via a stratum change. The ntpd hotplug leaves a status
flag file to indicate to dnsmasq.init that time is valid and that it
should now start in 'check dnssec timestamp valid' mode.
If ntpd client is not configured and you're using dnssec, then it is
presumed you're using an alternate time sync mechanism and that time is
correct, thus dnsmasq checks dnssec timestamps are valid from 1st start.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
V2 - stratum & step ntp changes indicate time is valid
V3 - on initial flag file step signal dnsmasq with SIGHUP if running
V4 - only accept step ntp changes. Accepting both stratum & step could
result in unpleasant script race conditions
V5 - Actually only accepting stratum is the correct thing to do after
further testing
V6 - improve handling of non busybox ntpd
if sysntpd not executable
dnsmasq checks dnssec timestamps
else
sysntp script disabled - look for timestamp file - allows external mechanism to use hotplug flag file
sysntp script enabled & uci ntp enabled - look for timestamp file
sysntp script enabled & uci ntp disabled - dnsmasq checks dnssec
timestamps
fi
/etc/os-release is the standard distribution release information
file, therefore add it (and image configuration options for
fields not previously present in LEDE). Once it is deemed
reasonable the non-standard openwrt_release, openwrt_version,
and device_info files could be removed (that is with this patch
we consider them deprecated in favour of the standard file).
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
puts br2684ctl init after ADSL init instead of before, so that the ESI
is set at the right time, and for consistency with the PTM driver.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Original URL got 303 redirect which then also dropped the commit id
leading to different file revision & MD5 mismatch.
Corrected URL & clarified commit ID use in Makefile
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
/etc/init.d/fstab had some warnings in it to let users know that they
should call "block mount" directly. these ended up in the bootlog.
fix this by splitting the code into boot() and start(). this way the system
will boot without warning but manually starting the script will lead to the
message.
fixes FS#3
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: John Crispin <john@phrozen.org>
The package Makefile was based on work at link [1] with the following
changes
1. Disable minidebuginfo support thus no dependency on liblzma
2. Add 2 patches for building against musl-libc and building with
mips16 enabled
3. Add LICENSE and DEPENDS info, etc.
[1] https://github.com/rpi-openwrt/rpi-packages/tree/master/libs/libunwind
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
ARC port of GDB is not yet upstream so we need to use
sources from Synopsys GitHub repo.
Given Synopys' commitment to upstream ARC support in GDB
in the nearest future it might be simpler to add a separate
package for ARC GDB instead of patching generic GDB package.
This way once ARC GDB stuff gets uptreamed we'll only need
to remove that new "gdb-arc" package.
Note 1 very minor change in generic gdb package was done -
it now depends on !arc (while "gdb-arc" depends on "arc").
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Recent versions of Chrome require this ciphers to successfully handshake with
a TLS enabled uhttpd server using the ustream-polarssl backend.
If `CONFIG_GCM` is disabled, `ssl_ciphersuite_from_id()` will return `NULL`
when cipher `0x9d` is looked up, causing the calling `ssl_ciphersuite_match()`
to fail with `POLARSSL_ERR_SSL_INTERNAL_ERROR`.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Add support for hostid dhcp config entry to dnsmasq. This allows
specification of dhcpv6 hostid suffix and works in the same way as
odhcpd.
Entries in auto generated dnsmasq.conf should conform to:
dhcp-host=mm:mm:mm:mm:mm:mm,IPv4addr,[::V6su:ffix],hostname
example based on sample config/dhcp entry:
config host
option name 'Kermit'
option mac 'E0:3F:49:A1:D4:AA'
option ip '192.168.235.4'
option hostid '4'
dhcp-host=E0:3F:49:A1:D4:AA,192.168.235.4,[::0:4],Kermit
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
- Fix calculation of `$vht_cap` bit field
- Replace wrong reference to `$tx_stbc` variable with proper `$tx_stbc_2by1` one
- Emit proper `RX-STBC-{1,12,123,1234}` tokens for the VHT capability list
See https://dev.openwrt.org/ticket/22535 for reference.
Signed-off-by: Scott Shambarger <devel@shambarger.net>
Daemons that are waiting for a timesync are only triggered when the action is stratum.
As step is the first sync action pass all actions to the ntpd hotplug scripts; it's up
to the ntpd hotplugscript to filter out the actions it is interested in.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
By default dnsmasq uses random ports for outbound dns queries;
when the maxport UCI option is specified the ports used will
always be smaller than the specified value.
This is usefull for systems behind firewalls.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Increase the default system log buffer size
from 16 kB (default both in logd source and in the startup script)
to 64 kB by adjusting the default value in startup script.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Increase the default system log buffer size
from 16 kB (built-in default in ubox logd)
to 64 kB by setting the option in /etc/config/system.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Record the state of any hardware LED configured through UCI and use that
information to revert the state when applying updated settings while
maintaining default behaviour of system LEDs.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The board_detect framework is now able to create the entire system config from
scratch so we can finally drop the copy shipped by base-files.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Now that config_generate is able to generate the entire /etc/config/system
from scratch we can apply the same logic as used for /etc/config/network;
when the configuration file exists already then do not do anything, else
generate it from the values provided by /etc/board.json .
In order to facilitate that move the file existance checking inside
/bin/config_generate and call it unconditionally from /bin/board_detect.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Currently, the uci data model does not provide support for specifying
the minimum TLS version supported in an OpenVPN instance (be it server
or client).
This patch adds support for writing the relevant option to the openvpn
configuration file at service startup.
Signed-off-by: Matteo Panella <morpheus@level28.org>
[Jo-Philipp Wich: shorten commit title, bump pkg release]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Attempt to reset all LED states before applying the UCI configuration to
avoid leaving disabled LEDs behind in lingering glowing state, e.g. when
changing the sysfs entry in the config from one hardware LED to another.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
>From wolfssl/openssl/opensslv.h, and from skimming the contents of what
"--enable-stunnel" actually does, it seems that --enable-opensslextra
doesn't give you the "full" openssl compatibility that you may wish for
these days. Unfortuantely, while wolfssl writes the build time options
into wolfssl/options.h, it doesn't include that file itself. User
applications must include that directly.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Add 'cake' qdisc kernel module package.
V2 - KDB Small update to base on latest cake tc changes (wash option
deprecated)
V3 - KDB Move kmod-sched-cake package to kernel as is kernel related
V4 - KDB Split into individual patches, kmod & tc
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Add cake support to 'tc' in iproute2
- Use a patch to modify tc instead of adding a new tc-adv package.
Patch creates q_cake.c that matches commit 3314230bc4
- Do not include the other things from tc-adv (cake0, cake2, pie etc.).
V2 - KDB Small update to base on latest cake tc changes (wash option
deprecated)
V3 - KDB Move kmod-sched-cake package to kernel as is kernel related
v4 - KDB Split into individual patches, tc & kmod
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
uClibc-ng pretends to be GNU libc 2.2 and then a fallback
scanf check is tried, so that libmount is disabled
afterwards. Add a fix already suggested upstream.
Add librt dependency required for other apps, too.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
It turns out most device vendors don't set the correct country code
in their devices' on-flash-EEPROM sections as they apparently rather
provide a complete per-target-market firmware with patched drivers
instead of just setting the country code.
This results in the driver to incorrectly assume the value stored in
the on-flash-EERPOM (usually US or China) being the regulatory domain
inside which the device is being used.
To work around this issue, OpenWrt introduced the ATH_USER_REGD config
variable to decide during build whether or not to allow the user to
override the regulatory domain setting. This option, however, is not
enabled by default and thus ends up being disabled for snapshots builds
and released binaries.
As we know for a long time that most devices got borked regulatory
domain values set in their EEPROMs we should allow our users to respect
their local law (instead of just assume US or China laws).
Note that also the current default has great potential of users not
ever setting their regulatory domain and thus using inapproriate and
potentially illegal frequencies and/or tx-power settings
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This allows one to select CT firmware for ath10k
if one prefers to try this firmware instead of stock
ath10k firmware.
The 10.1 (988X) firmware can actually be installed beside the
default firmware, but it will not be used as long as the firmware-5.bin
file exists. Users could rename the files and reboot to use different
images.
The 99X0 (wave-2) firmware uses the same firmware-5.bin name as default
firmware, so it cannot be installed at the same time as default firmware.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Kernel module for the OMAP Random Number Generator
found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx
multimedia processors.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
When the gettext-full host build phase finds an `emacs` exectuble during the
build it will launch an `emacs --batch` command to run some Lisp code.
On certain Debian systems the `/usr/bin/emacs` path might point, via
alternatives, to the `/usr/bin/jove` editor which will then launch an
interactive session when invoked by the gettext build.
In order to avoid this problem, explicitely disable emacs handling during
the build through a configure environment variable.
Also remove my now unreachable maintainer address.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.
Major cleanup and addition of brnboot second stage u-boot was done by
me.
The second stage brnboot u-boot is untested, since the brnboot prompt
is secured by a still unknown password. But should work.
The former ram values are replaced with the ram values extracted from
the original brnboot. The old ones didn't worked with the ramboot
image.
Signed-off-by: Mathias Kresin <dev@kresin.me>
The default bootloader partition of some devices is to small for an
u-boot with uncompressed gphy firmware(s).
Instead of increasing the bootloader partition size, in compare to the
stock firmware, compress the firmware. This would allow the bootloader
of at least the FritzBox 3370 as well as the bootloader of the
VGV7510KW22 to fit into the bootloader partition of the stock firmware.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.
Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips.
Signed-off-by: Mathias Kresin <dev@kresin.me>
This makes brcmfmac compatible with mac80211 which uses dev_alloc_name
(and so returns -ENFILE on error).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
LEDE project seems to be using "LEDE" as its acronym everywhere. To keep
things consistent adjust default wireless SSID.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Alexander Couzens <lynxis@fe80.eu>
The igb kmods selects kmod-i2c-algo-bit which in turn is invisible until
kmod-i2c-core gets selected, causing kmod-igb to be hidden from menuconfig
as well.
Let kmod-igb select kmod-i2c-core as well in order to make it visible
in menuconfig right away.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- install correct libs to staging/usr/lib
fixes eudev, nfs-kernel-server
the lib*.a seem broken - use the correct .so files
and remove .a libs
- some build breakage was observed with parallel builds:
text-utils/more-more.o: In function `putstring':
more.c:(.text+0x1f4): undefined reference to `tputs'
text-utils/more-more.o: In function `initterm':
more.c:(.text+0x1b74): undefined reference to `setupterm'
more.c:(.text+0x1f0c): undefined reference to `tparm'
more.c:(.text+0x20ac): undefined reference to `tigetnum'
more.c:(.text+0x20c8): undefined reference to `tigetflag'
more.c:(.text+0x20ec): undefined reference to `tigetstr'
more.c:(.text+0x2148): undefined reference to `PC'
text-utils/more-more.o: In function `reset_tty':
more.c:(.text+0x2630): undefined reference to `tputs'
- fix line length
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Some package postinstall operations, e.g. those emitted by the LuCI build
system, source and delete the uci-defaults themselves upon package insteall,
causing the generic defaults apply code to trigger shell errors like:
.../luci-app-ddns.postinst: .: line 130: can't open './40_luci-ddns'
Rework the generic apply code to check the existence of the uci-defaults
script before trying to source it, use sed to prefilter the list of entries
from the control file and perform the directory change in a subshell,
avoiding the need for cd $OLDPWD.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
reported by reproducible openwrt project[1]:
we package some libtool shell script
- add missing dependencies
- fix paths
- make in InstallDev does not seem to be necessary
tested (cal,dmesg,sfdisk) on x86 qemu VM with allyesconfig
[1]: https://reproducible.debian.net/openwrt/openwrt.html
[Jo-Philipp Wich: fix double slash in sfdisk path, reword commit message]
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Allow path specifications to refer to just '@' or '$' which is useful for
exporting the keys or array indizes of the toplevel object to the shell.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Fix a „semantic typo“ introduced in b78aae793e,
where TARGET_INIT_PATH was used instead of CONFIG_TARGET_INIT_PATH.
Signed-off-by: Dario Ernst <Dario.Ernst@riverbed.com>
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.
The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.
The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Centralize setting all version information in include/version.mk
* Set RELEASE env variable in include/version.mk instead of toplevel.mk.
Stop exporting the variable.
* Remove hardcoded release name from /etc/banner
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The busybox ntpd utility currently uses ntp servers specified in uci.
This patch allows the ntpd utility to use NTP servers received via DHCP(v6)
Following uci parameters have been added:
use_dhcp : enables NTP server config via DHCP(v6)
dhcp_interface : use NTP servers received only on the specified DHCP(v6) interfaces; if empty all interfaces are considered
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Instead of making assumptions about the leasefile and resolv file make sure
we use what the user configures, but fall back to defaults if no configuration
is specified
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Update to dnsmasq2.76. Refresh patches. Add new patch to fix musl
'poll.h' location warning.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Storage of such zones is provided by a nf_ct_ext struct, hence conntrack
memory foot print will not be increased if zones are not used.
Signed-off-by: Alin Năstac <alin.nastac@gmail.com>
According to the author, all SPI related configs are copy & paste
leftovers. Which makes sense since nothing is connected to the SPI bus
on this device.
The NOR SPL isn't required for this board, since the NOR is directly
memory mapped.
Allow to overwrite the env in ram while using brn variant. Do not set
the power GPIO pin twice.
Signed-off-by: Mathias Kresin <dev@kresin.me>
use:
- 00nn for u-boot patches
- 01nn for new boards
While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.
Signed-off-by: Mathias Kresin <dev@kresin.me>
wolfssl has a fine grained feature and compatibility control
for compiling stunnel, lighthttp or (partly) openssl dropin
ustream-ssl uses features that require normally
HAVE_SNI, HAVE_STUNNEL and the openssl compatibility headers
ar71xx ipkg sizes of wolfssl 3.9.0:
- with stunnel: 144022
- this patch (w.o. stunnel): 131712
- without openssl(extra): 111104
- w.o openssl/sni:108515
- w.o openssl/sni/ecc: 93954
so patch 300 saves around 12k compressed ipkg size
v2: keep & rename patch 300 for clarity, fixes ustream-ssl/cyassl
that broke with v1
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Typo, missing space before ] in previous commit caused shell syntax
failure and incorrect restoration of time.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
fixes:
CVE-2016-3739: TLS certificate check bypass with mbedTLS/PolarSSL
- remove crypto auth compile fix
curl changelog of 7.46 states its fixed
- fix mbedtls and cyassl usability #19621 :
add path to certificate file (from Mozilla via curl) and
provide this in a new package
tested on ar71xx w. curl/mbedtls/wolfssl
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
conditionally save dnsmasq.time across sysupgrade
dnsmasq uses /etc/dnsmasq.time as record of the last known good
system time to aid its validation of dnssec timestamps. dnsmasq
updates the timestamp on process start/stop once it considers the system
time as valid. The timestamp file should be preserved across system
upgrade but should not be included as part of normal configuration
backups to prevent restores corrupting the current timestamp.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps. By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past. Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.
In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.
Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
conditionally save dnsmasq.time across sysupgrade
dnsmasq uses /etc/dnsmasq.time as record of the last known good
system time to aid its validation of dnssec timestamps. dnsmasq
updates the timestamp on process start/stop once it considers the system
time as valid. The timestamp file should be preserved across system
upgrade but should not be included as part of normal configuration
backups to prevent restores corrupting the current timestamp.
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps. By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past. Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.
In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.
Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.
Some SSL applications requires a certificates bundle rather
than a directory containing certificates. For thos applications
we build the ca-bundle package
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
Add packaging of it87 hardware monitor kernel module. It is
a common thermal and voltage monitor that is in many x86
(at least) devices, and is just another i2c hwmon module.
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
The patch 300-ath9k-force-rx_clear-when-disabling-rx.patch broke TX99 support
in ath9k. Fix the patch by only applying rx_clear if TX99 mode is not used.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
The libusb package is not parallel build save, a make -j16 reliably breaks it.
Forcibly disable parallel building.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
the recent fixes to make mount_root work during failsafe caused lots of
unwanted side effects. use the new preinit sentinel file to detect if
we are in preinit. this will also work if logged in via ssh.
Signed-off-by: John Crispin <john@phrozen.org>
- Update the terminal window title with the current directory and hostname, if using an xterm-compatible terminal emulator.
- Add ll, an useful alias to ls.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
This was found while investigating why luarocks does not work. It was
traced to a quite old lnum patch for 5.1.3. I compared against the
latest 5.1.4 patch - https://github.com/LuaDist/lualnum and discovered
the lessthan/lessequal evaluation was not falling through to the
call_orderTM (tag methods).
I have tested LuCI (simple tests) and used the following lua code to
validate the patch (both host and target patches supplied): -
> local my_mt = {
> __eq = function(v1, v2)
> print("__eq")
> return false
> end,
> __lt = function(v1, v2)
> print("__lt")
> return false
> end,
> __le = function(v1, v2)
> print("__le")
> return false
> end
> }
>
> function get_my(vstring)
> local my = {}
> my.string = vstring;
> setmetatable(my, my_mt);
> return my;
> end
>
> local a = get_my("1.0")
> local b = get_my("1.0")
>
> local eq_works = a == b;
> local lt_works = a < b;
> local gt_works = a > b;
>
> local lte_works = a <= b;
> local gte_works = a >= b;
Without the patch the following error will be presented: -
“attempt to compare two table values”
Signed-off-by: David Thornley <david.thornley@touchstargroup.com>
Update the dropbear package to version 2016.73, refresh patches.
The measured .ipk sizes on an x86_64 build are:
94588 dropbear_2015.71-3_x86_64.ipk
95316 dropbear_2016.73-1_x86_64.ipk
This is an increase of roughly 700 bytes after compression.
Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The original iperf package is unmaintained. This switches to the "iperf2"
project on sourceforge, a fork that started where the previous iperf left
off.
Version 2.0.8 fixes the issue that patch 002 handled, so that can be dropped.
Due to a faulty check in configure.ac, this version needs _GNU_SOURCE
defined to build properly against musl. Various other obsolete build
options were also removed.
Signed-off-by: Bert Vermeulen <bert@biot.com>
The option --disable-utmpx was deleted by accident in commit 7545c1d;
add it again to the CONFIGURE_ARGS list
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
this patch fixes a bug when using uclibc on MIPS. The bug does not exist when
using musl, so drop the fix.
Signed-off-by: John Crispin <john@phrozen.org>
The json_select call fails when there are no roles or ports objects in board.json. "json_select .." must not be executed after failing.
This fixes for example LEDs not being set up in /etc/config/system.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Remove the udhcpc -R release option as sending a DHCP release
is configurable via the uci option release.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
The patch made sure the ncursesw library was not selected to save space,
but that library doesn't exist in this distribution at all.
Signed-off-by: Bert Vermeulen <bert@biot.com>
Currently system log is always included as a part of ubox.
Add logd as a seperate package and add it to default packages list.
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>
SVN-Revision: 49285
So far fixtrx was calculating checksum over amount of data matching
partition erase size. It was mostly a workaround of checksum problem
after changing anything in initial TRX content (e.g. formatting JFFS2).
Its main purpose was to make bootloader accept modified TRX. This didn't
provide much protection of flash data against corruption.
This new option lets caller request calculating checksum over a bigger
amount of data. It may be used e.g. to include whole kernel data for
checksum and hopefully make bootloader go info failsafe mode if
something goes wrong.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
We plan to adjust usage of the main buffer to allow reading custom
amount of data for CRC32. This means we need another buffer that will be
always block aligned.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
1) Put sanity checks in one place
2) Respect provided offset
3) Read only as much data as needed for MD5 calculation
Thanks to the last change this is a great speedup and memory saver. On
devices with NAND flash we were allocating & reading about 128 MiB while
something about 8 MiB is enough.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
This avoid long (and unneeded) process of reading all data in case of
running on MTD not containig Seama entity.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
On platforms supporting both: TRX and Seama calling "fixtrx" was
resulting in trying to fix Seama as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Packages may install scripts into /etc/uci-defaults to be executed once
after installation, usually at the first boot of the target. This works
fine if the package was installed to the rootfs during build or using
the ImageBuilder.
If the package is installed using opkg during run-time uci-defaults
were applied only after a reboot of the device. Avoid the need to
reboot by evaluting the package's uci-defaults in default-postinst.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Bump to the latest version, fixes several security issues:
* CVE-2016-2107, CVE-2016-2105, CVE-2016-2106, CVE-2016-2109, CVE-2016-2176
More details at https://www.openssl.org/news/openssl-1.0.2-notes.html
Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
Update to latest HEAD in order to fix MARK rule generation for local traffic,
also fix a possible race condition during firewall start.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This patch adds missing ASCII aliases to the libiconv stub in order to avoid conversion errors like https://github.com/openwrt/packages/issues/2373
Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
Patch Lua packet script defines SHRT_MAX which is already defined in <linux/kernel.h> and
is included indirectly by lauxlib.h. Fix the redefintion as it leads to compile failure
on systems which treat macro redefinition as an error
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Remove the public unatteded buildkey from the opkg package to avoid
having hardcoded keys in tree. Use the external keyring package instead
which can be easily updated by users.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Conntrack support reads the connection track mark associated with
incoming DNS queries and sets the same mark value on the upstream
forwarded DNS query. This can be usefull to track traffic generated
by dnsmasq to associate it with the clients who generate the queries,
usefull for bandwidth accouting and firewall.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
A dropbear instance having an interface config won't start if the interface is down as no
IP address is available.
Adding interface triggers for each configured interface executing the dropbear reload script
will start the dropbear instance when the interface is up.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Utmp support tracks who is currenlty logged in by logging info to the file /var/run/utmp (supported by busybox)
Putuline support will use the utmp structure to write to the utmp file
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Make sending a DHCP release configurable when the client exits allowing to clean up
IP/mac state info in intermediate devices.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
lua_packet_segment parameter start has type char pointer; in function lua_tg
it's assigned an uint16 value generating compiler warnings obviously indicating
posssible seg fault problems. Fix the issue by using the correct skb functions
so the parameter points to the position inside the sk_buff
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Stijn Cleynhens <stijn.cleynhens@gmail.com>
Add nonshared flag to package depending on specific targets or subtargets as
there's no guarantee otherwise that they'll be available in the shared repo.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When the same package file is specified multiple times on the opkg install
command line, the name pointer on the argv array becomes stale after the
package structures have been merged, leading to invalid memory accesses
upon install.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Instead of converting the firmware files ourselves, use the files
generated during the normal kernel build process. This fixes packaging
kmod-e100 in the SDK environment.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
