Commit Graph

888 Commits

Author SHA1 Message Date
Petko Bordjukov
1e2e5c66ed kernel: package Broadcom BNX2X driver
bnx2x driver support for the x86 architecture. Includes module and
firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet
adapters.

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[added +kmod-lib-zlib-inflate as well]
2019-06-20 20:02:29 +02:00
Petr Štetiar
f342ffd300 treewide: kernel: bump some targets to 4.19
Lets bump kernel to 4.19 on targets which were run tested or got ACKed
so we've enough time to make it ready for next release:

 armvirt/32 (runtested in qemu)
 armvirt/64 (runtested in qemu)
 ath79/generic (runtested on Carambola2)
 gemini/generic (runtested on DIR-685, DNS-313, SQ201, SL93512R)
 imx6/generic (runtested on Apalis)
 ipq40xx/generic (runtested on nbg6617)
 malta/be64 (runtested in qemu)
 malta/be (runtested in qemu)
 malta/le (runtested in qemu)
 malta/le64 (runtested in qemu)
 mpc85xx/generic (runtested on TL-WDR4900)
 mpc85xx/p2020 (runtested on P2020RDB)
 mvebu/cortexa53
 mvebu/cortexa72
 mvebu/cortexa10
 octeon/generic (runtested on EdgeRouter Lite)
 sunxi/cortexa53 (build tested only)
 sunxi/cortexa7 (runtested on Lime2-K)
 sunxi/cortexa8 (build tested only)
 tegra/generic
 x86/64 (runtested in qemu)

Acked-by: Zoltan HERPAI <wigyori@uid0.hu> [sunxi]
Tested-by: Linus Walleij <linus.walleij@linaro.org> [gemini]
Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [mvebu, tegra]
Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [octeon]
Tested-by: Pawel Dembicki <paweldembicki@gmail.com> [mpc85xx/generic mpc85xx/p2020]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-18 16:08:55 +02:00
Alexander Couzens
c4abaa345c
Revert "base-files: add console to inittab"
This reverts commit cde52cb486.
When using OpenWrt in qemu, the shell is unsuable

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2019-05-25 08:13:20 +02:00
Paul Spooren
cde52cb486
base-files: add console to inittab
When running OpenWrt inside an LXC container no shell is opend as LXC
defaults to a virtual /dev/console.

This patch allows to enter a shell after starting the container via
`lxc-start`, without it is only posible to access a shell on tty1 via
`lxc-console`.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-05-21 14:54:15 +02:00
Koen Vandeputte
8eb7cf0cd7 kernel: bump 4.19 to 4.19.44
Refreshed all patches.

Remove upstreamed:
- 103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-05-21 09:45:15 +02:00
Koen Vandeputte
f442b306f9 kernel: bump 4.14 to 4.14.120
Refreshed all patches.

Remove upstreamed:
- 103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
- 060-fix-oxnas-rps-dt-match.patch

Altered patches:
- 0067-generic-Mangle-bootloader-s-kernel-arguments.patch
- 006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
- 996-generic-Mangle-bootloader-s-kernel-arguments.patch

Compile-tested on: ar71xx, cns3xxx, imx6, mvebu, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-05-21 09:45:15 +02:00
Hauke Mehrtens
2164a7bf15 x86: Activate CONFIG_X86_SMAP
This activates "Supervisor Mode Access Prevention". modern CPUs will
prevent the kernel code from accessing any data from the userspace
without the usage of copy_to_user() or copy_from_user()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-05-11 17:15:41 +02:00
Hauke Mehrtens
75eb8a146d kernel: Deactivate CONFIG_BINFMT_MISC
CONFIG_BINFMT_MISC allows it to add support for new executable formats
to the kernel from user space, the kernel will then detect for example a
java binary and call the java execution program automatically. I am not
aware that this feature is used in OpenWrt and this could be used to
exploit something. Deactivate it for all targets for now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-05-11 17:15:41 +02:00
Felix Fietkau
85017c40f4 build: add a config option for enabling a testing version of the target kernel
If the target supports a newer kernel version that is not used by default
yet, it can be enabled with this option

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-11 11:37:10 +02:00
Lucian Cristian
e711fd48be x86: video: disable buildtin amdgpu DRM driver
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-02-17 19:22:39 +01:00
Lucian Cristian
cb3798cf3f x86: DRM: add x64 subtarget support
copy settings from generic subtarget

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-02-17 19:22:39 +01:00
Lucian Cristian
edb21ee3d2 x86: video: disable builtin radeon DRM driver
builtin driver can't access the /lib/firmware while booting,
module driver will be able to read and load the firmware files

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-02-17 19:22:39 +01:00
Tomasz Maciej Nowak
55b808e0c4 x86: image: add test module to bootloader
It was previously added in 546fced, which was part of "intel-microcode:
load as early as possible" series.
Unfortunately the conditionals added to GRUB config caused error on boot,
because on sysupgrade, bootloader is not updated and is left with old
features/modules. Since this module is needed for early microcode load
and transition to this needs to be done step by step, enable the test
module now, so that every newly created image has it already embedded.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-02-17 18:22:40 +01:00
Tomasz Maciej Nowak
bb0e4f9fb0 build: remove leftovers from previous x86 commits
VBoxManage is not used and the image is created with proper permisions:
0f5d0f6  image: use internal qemu-img for vmdk and vdi images drop host
         dependencies on qemu-utils and VirtualBox

Unreachable config symbols:
9e0759e  x86: merge all geode based subtargets into one

No need to define those symbols since x86_64 is subtarget of x86:
196fb76  x86: make x86_64 a subtarget instead of a standalone target

Unreachable config symbols, so remove GRUB_ROOT:
371b382  x86: remove the xen_domu subtarget

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-02-17 18:22:40 +01:00
Hauke Mehrtens
75fdf3ba01 x86: Add support for kernel 4.19
This adds initial support for kernel 4.19 to the x86 target.
The patches and the kernel configurations were copied from kernel 4.14
and then refreshed.

The legacy and the genode target will not support PAE any more because
they use a CPU type which does not support PAE, the generic sub target
still supports PAE.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-12 22:40:36 +01:00
Hauke Mehrtens
f6e0ecdceb x86: Refresh kernel 4.14 configuration
This refreshes the kernel configuration for kernel 4.14.
First this was run for the legacy target:
	make kernel_oldconfig
Then for all targets including the legacy target this was run:
	make kernel_oldconfig CONFIG_TARGET=subtarget
The option CONFIG_104_QUAD_8 was added to the generic configuration
because it would have been automatically removed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-12 22:40:12 +01:00
Hauke Mehrtens
0ea7160abe x86: Use kernel specific subtarget configurations
This makes it possible to use different sub target configurations for
kernel 4.19 for example.
To support kernel 4.9 and kernel 4.14 with the same configuration file
already needed some extra work this will not be needed for kernel 4.19
any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-12 22:39:41 +01:00
Alberto Bursi
9c4f903999 x86: enable kmod-bnx2 on 64-bit by default
Gigabit ethernet adapters using BCM5706/5708/5709/5716 chipset are
common on servers and as easy/cheap to get as Intel based ones.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2019-01-02 22:12:19 +01:00
Tomasz Maciej Nowak
c288ad9c2b x86: make sysupgrade.tgz reachable again
Moving binding mount before check for saved sysupgrade configuration
made it unreachable. Fix it by moving binding mount after the check.

Fixes: f78b2616 (x86: mount writable bootfs)
Reported-by: Lucian Cristian <luci@powerneth.ro>
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-12-03 07:38:20 +01:00
John Crispin
c6aa4f53e8 Revert "x86: add intel microcode entries to grub config"
This reverts commit 546fced2a2.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:38 +01:00
John Crispin
8ead5a735d Revert "x86: add amd microcode entries to grub config"
This reverts commit a822283c7e.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:35 +01:00
Tomasz Maciej Nowak
a822283c7e x86: add amd microcode entries to grub config
Create initrd enries for x86 images, that'll load amd microcode as early
as possible. Also remove the preinit script responsible for late load of
microcode.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-11-26 12:05:45 +01:00
Tomasz Maciej Nowak
546fced2a2 x86: add intel microcode entries to grub config
Create initrd enries for x86 images, that'll load intel microcode as
early as possible. To achieve that the test module for grub is enabled
which provides shell-like conditionals. Also restrict the late load of
microcode to AMD processors.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-11-26 12:05:44 +01:00
Tomasz Maciej Nowak
51e199fbe8 x86: add packages files to image bootfs
Add files to bootfs image from selected as built-in packages, which want
to install files to targets boot file system.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-11-26 12:05:44 +01:00
Tomasz Maciej Nowak
f78b261637 x86: mount writable bootfs
Mount boot file system with rw option to allow installation of packages
which install files to /boot directory.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-11-26 12:05:44 +01:00
Mathias Kresin
80c61c161a treewide: use wpad-basic for not small flash targets
Add out of the box support for 802.11r and 802.11w to all targets not
suffering from small flash.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Mathias did all the heavy lifting on this, but I'm the one who should
get shouted at for committing.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 15:07:41 +01:00
Felix Fietkau
212aa33226 kernel: enable memory compaction
Compaction is the only memory management component to form high order (larger
physically contiguous) memory blocks reliably. The page allocator relies on
compaction heavily and the lack of the feature can lead to unexpected OOM
killer invocations for high order memory requests. You shouldn't disable this
option unless there really is a strong reason for it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz>
2018-10-09 14:29:55 +02:00
Felix Fietkau
1e8882585c kernel: support gcc-optimized inlining on all architectures
Optimized inlining was disabled by default when gcc 4 was still
relatively new. By now, all gcc versions handle this well and there
seems to be no real reason to keep it x86-only.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-09 14:15:53 +02:00
Felix Fietkau
911cacfc35 x86: remove linux 4.9 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-29 18:09:45 +02:00
Hauke Mehrtens
0f2787b9ff x86: geode: Add missing config options
This adds a configuration options which is needed now.
Without this patch the geode build will fail.

Fixes: 4eda2fddf2 ("x86/geode: enable X86_INTEL_LPSS to select PINCTRL")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-08-26 12:32:26 +02:00
Martin Schiller
17f30bfcf7 x86/64: enable X86_INTEL_LPSS to select PINCTRL
This makes it possible to use the MCP23S08 i/o expander
on x86_64 platforms with linux 4.14.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2018-08-25 15:33:51 +02:00
Martin Schiller
4eda2fddf2 x86/geode: enable X86_INTEL_LPSS to select PINCTRL
This makes it possible to use the MCP23S08 i/o expander
on geode platforms with linux 4.14.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2018-08-25 15:33:51 +02:00
Alex Maclean
894a95fa2d x86: add UHCI and XHCI USB host drivers to 4.14
Without UHCI a non-trivial number of machines will have no keyboard
without BIOS assistance.

Add XHCI as well in case there are chipsets which don't support legacy
interfaces, and support PCI OHCI controllers also.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-25 13:18:35 +02:00
Kjel Delaey
8492ad0cc1 x86: add support to set GRUB menu entry title
$ make menuconfig

        Target Images -> Title for the menu entry in GRUB

Signed-off-by: Kjel Delaey <kjel_delaey@hotmail.com>
2018-07-30 15:55:21 +02:00
Koen Vandeputte
2792ef55ab kernel: bump 4.9 to 4.9.106
Refreshed all patches

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-06-07 09:04:46 +02:00
Sergey Ryazanov
67a3cdcbb0 kernel: enable THIN_ARCHIVES by default
THIN_ARCHIVES option is enabled by default in the kernel configuration
and no one target config disables it. So enable it by default and remove
this symbol from target specific configs to keep them light.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:20 +02:00
Sergey Ryazanov
bdc2b58c4b kernel: enable FUTEX_PI by default
New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols
are enabled. Both of these symbols are enabled by default in the
generic config, so enable FUTEX_PI by default too to keep platform
specific configs minimal.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:12 +02:00
Sergey Ryazanov
a08b0d0c31 kernel: enable EXPORTFS by default
OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have
OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config
of 4.14 and remove this option from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:05 +02:00
Sergey Ryazanov
978543a246 kernel: disable DRM_LIB_RANDOM by default
DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST
which is disable by default, so disable DRM_LIB_RANDOM by default too.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:57 +02:00
Sergey Ryazanov
ead26e9db6 kernel: disable DMA_{NOOP|VIRT}_OPS by default
These options do not used by any supported arch, so disable them by
default to make arch configs a bit more clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:49 +02:00
Sergey Ryazanov
f928c338ad kernel: disable ARCH_WANTS_THP_SWAP by default
Only one arch (x86_64) enables this option. So disable
ARCH_WANTS_THP_SWAP by default and remove referencies to it from all
configs (except x86_64) to make them clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:42 +02:00
Alif M. Ahmad
b0a51dab8c x86: disable CONFIG_EFI_VARS
Disable CONFIG_EFI_VARS, since it suffers from sysfs limitation (no
support for variable longer than 1024 bytes).

kmod-fs-efivarfs is the replacement of this, which enables mounting
efivarfs file system and doesn't suffer from 1024 bytes limitation.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2018-05-18 11:19:00 +02:00
Kristian Evensen
8f9baf5e1a x86: Add APU3 reference to x86 board.d
There is a new APU-model available, APU3. The device is configured in
the same way as the APU1 and APU2, so the same LED/network setup can be
used.

I considered changing the case to pc-engines-apu*, but I chose to follow
the existing pattern and add the full board name.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2018-05-18 09:17:24 +02:00
Hauke Mehrtens
b377a908bf x86: Use kernel 4.14 by default
Support for kernel 4.14 was added 2 months ago, make it now the default
kernel to use for the x86 target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Stijn Segers <francesco.borromini@inventati.org>
2018-02-18 19:51:58 +01:00
Zoltan HERPAI
1ba6d59f2b x86: add preinit hook to reload microcode
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-11 14:39:24 +01:00
Zoltan HERPAI
72d949e7ba x86: enable microcode loading for Intel and AMD
Enable for 4.9 and 4.14.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-11 14:39:12 +01:00
Hauke Mehrtens
e390756eff x86: Add CONFIG_RETPOLINE to fix build
This adds support for the new configuration option CONFIG_RETPOLINE and
refreshes the configuration.

Fixes: d8565a06dc ("kernel: bump 4.9 to 4.9.77")
Fixes: 9ddfac8015 ("kernel: bump 4.14 to 4.14.14")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-20 22:46:34 +01:00
Stijn Tintel
d6679090b4 kernel: add missing config symbol
The KEXEC_FILE symbol exists for X86 since kernel 3.17, and since 4.10
for PPC64. Add it to x86/config-4.9 and to generic/config-4.14.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-01-14 21:27:33 +02:00
Stijn Tintel
34e319dd30 kernel: move DRM_DEBUG_* symbols to generic config
While working on a new target (meson), the kernel build failed due to
missing DRM_DEBUG_MM_SELFTEST symbol. This can potentially happen on all
targets that enable DRM drivers in the kernel config or via kmod
packages, so add it to the generic config and remove it from x86
subtarget configs, together with DRM_DEBUG_MM.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-01-14 20:15:01 +02:00
Kevin Darbyshire-Bryant
1d2590f838 kernel: bump 4.9 to 4.9.75
Refresh patches

Fixes:  CVE-2017-5754 aka Meltdown

Tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[fix conflict after 4.14 bump]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-01-10 00:11:39 +02:00
Philip Prindeville
d280c03a1d x86: preinit: use board_name on Sm Super Servers
Supermicro puts "Super Server" into their product_name DMI value
for a whole slew of products, making this value about as useful
as not having been filled in at all.  Instead, fall back on the
board_name instead.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-01-04 13:44:42 +01:00
Philip Prindeville
445f980a38 x86: preinit: make name rewrite into reusable function
There might be other places (such as vendor-supplied preinit scripts)
where we wish to take a DMI name and clean it up in a consistent way,
so make the sed command into a function.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-01-04 13:44:42 +01:00
Stijn Tintel
c5ca1c9ab6 kernel: bump 4.14 to 4.14.11
Rename unwinder config symbols to match upstream changes.
Refresh patches.
Update patch that no longer applies: 202-reduce_module_size.patch

Also enable CONFIG_PAGE_TABLE_ISOLATION. This feature was backported
from 4.15 to the 4.14 stable series. It is enabled by default, so enable
it in OpenWrt as well.

Compile-tested on x86/64.
Runtime-tested on x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-01-03 00:07:10 +02:00
Philip Prindeville
2e23733838 x86: add NVMe support for motherboards w/ M.2 slot
A lot of 1U x86_64 servers have NVMe support, which is lower-power
and higher speed than SSD or CFast drives, etc.  The drivers
required to make this work are trivial.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-12-26 23:31:00 +01:00
Tomasz Maciej Nowak
cb2c0649ee kernel: move console loglevel to generic
Move CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 to generic, to make it consistent
across all targets.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2017-12-23 14:24:40 +01:00
Hauke Mehrtens
481e1f23f5 x86: Add support for kernel 4.14
This adds basic support for kernel 4.14, this was tested in qemu only.
The subtarget configuration was refresh with kernel 4.14 and the
options needed to make it compile on kernel 4.9 were added manually.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-16 22:16:07 +01:00
Hauke Mehrtens
a362df6f25 x86: refresh configuration
Just refresh the kernel configuration, some options are removed because
they are now in the generic kernel configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-16 22:11:05 +01:00
Philip Prindeville
f96085b35d x86: add on-chip thermal sensors and cpuid support
Cover temperature sensors for all mainstream 64-bit processors, including
AMD 10h and 15h families, Intel iCore, Xeon, Atom, and Via Nano.  Also
add CPUID support for user-space applications to detect CPU type.

Include the on-chip sensors for 64-bit CPU's in the generic profile
in case someone builds a 32-bit kernel to run on a Xeon SoC, etc.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-12-16 14:41:37 +01:00
Philip Prindeville
9868eba5a0 x86: refresh settings for 4.9.59
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-12-16 14:41:37 +01:00
Zoltan HERPAI
7b5c989ab9 merge: targets: update image generation and targets
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Lucian Cristian
9f13f98c8c kernel: Hyper-V PCI pass through
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-11-22 22:36:20 +01:00
Lucian Cristian
551de61ddc kernel: add 32bit x86 HYPER-V support
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[refresh config]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-22 22:36:02 +01:00
Koen Vandeputte
62ede4f783 kernel: bump 4.9 to 4.9.63
Refreshed all patches.

Removed upstreamed parts.

Compile-tested: cns3xxx, imx6, mvebu, layerscape
Run-tested: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-11-22 20:45:52 +01:00
Felix Fietkau
20f365d70f x86: fix reboot on apu2 boards
PC Engines apu2 needs to use the PCI reboot method, otherwise it can
hang.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-10-05 21:14:43 +02:00
Philip Prindeville
344fde35e3 kernel: add packaging for Xeon iTCO watchdog timer
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-09-17 00:08:00 +02:00
Baptiste Jonglez
cd10577350 x86: Fix xen serial console by removing conflicting PATA driver
The Xen serial console has been broken since the xen_domu subtarget
was merged in the generic x86 subtarget (commits 1d6879ee and 371b382a).

The reason for the broken serial console seems to be an IRQ conflict
between the serial console driver and the PATA_LEGACY driver:

[    1.330125] genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (platform[pata_legacy.4])
[    1.330134] hvc_open: request_irq failed with rc -16.
[    1.330148] Warning: unable to open an initial console.

Just drop the PATA_LEGACY driver from the x86/generic and x86_64
subtargets, since this driver is marked experimental and only supports
very old ISA devices anyway.  It is still included in the x86/legacy
subtarget where it rightfully belongs.

Fixes: FS#787

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
2017-07-16 11:31:52 +02:00
Baptiste Jonglez
6548b34c3f x86/64: add xen DomU support
Xen support for x86/generic was added in 1d6879ee.  This commit also
enables it for x86/64.

This was successfully tested with Xen 4.5, although the serial console
is broken in the same way as x86/generic (see FS#787)

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
2017-07-16 02:29:05 +02:00
Baptiste Jonglez
de8370fcf2 x86: Move USB support from subtargets to target config
All x86 subtargets enable USB support, so it makes sense to enable it
in the target config instead, to avoid duplication.

Also refresh subtarget configs accordingly.

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
2017-07-16 02:29:05 +02:00
Baptiste Jonglez
609f169ff4 x86: Refresh subtargets kernel config
This was done by simply running `make kernel_menuconfig CONFIG_TARGET=subtarget`
and then saving without changing any option.

Most of the removed options can be explained because they are already
present in the target config or in the generic 4.9 config:

- PAE-related options, enabled by default on x86 by 961c0eac
- LZO-related options, enabled by default since 4.9

As far as I understand the build system, this shouldn't have any
user-visible impact, because the build system already merges the
various kernel configs during build.

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
2017-07-16 02:29:04 +02:00
Baptiste Jonglez
31ba457416 x86: Drop stray subtarget "epia"
This subtarget was added by 961c0eac, probably by mistake.  It does
not contain anything beside a kernel config.

Acked-by: Daniel Golle <daniel@makrotopia.org>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
2017-07-16 02:28:50 +02:00
Mathias Kresin
e4e984f2a0 treewide: use only board_name function to get name
Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree
compatible string directly. Always use the board_name function to get
the board name.

The admswconfig package still reads /proc/cpuinfo directly. The code
looks somehow broken and the whole adm5120 which uses this package
looks unmaintained. Leave it as it is for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
ac3e05c5d7 treewide: populate boardname and model earlier
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Stijn Tintel
a576ed5437 scripts/gen_image_generic.sh: move from x86/image
The script can also be useful for other targets.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-07-14 04:09:16 +02:00
Felix Fietkau
7887a46f45 build: enable gzipping of images on x86 even if ext4 is disabled
There is lots of padding between the boot partition and the rootfs, so
gzipping is helpful here

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-07-06 11:30:33 +02:00
Stijn Tintel
880f73c327 kernel: cleanup CONFIG_SCHED_HRTICK
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd76563.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-29 04:46:59 +02:00
Sergey Ryazanov
68e7a2a0b7 kernel: disable CONFIG_SG_POOL by default
CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last
one is disabled by default then disable CONFIG_SG_POOL by default too.
And explicitly enable it only for platforms that use CONFIG_SCSI.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-06-07 18:31:10 +02:00
Lucian Cristian
cdedb24ef8 x86: include USB HID by default
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-06-07 18:31:10 +02:00
Kristian Evensen
1898f7339f Add missing APU1 reference to x86 board.d
x86 board.d only contains a case for the APU2, not the APU1. This
causes, for example, network configuration not to be created correctly.
Even though the APU1 seems to reaching EOL, there a still a lot of them
out there.

The APU1 and APU2 is configured in the same way and this patch should
also be considered for stable, as the error also exists there.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-06-06 23:01:53 +02:00
Jo-Philipp Wich
1893b5622d x86: disable X2APIC support for legacy subtargets
Explicitely disable X2APIC support on legacy targets since the targeted
processor types do not support it anyway there.

Fixes FS#285.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-02 01:51:03 +02:00
Matthias Schiffer
dac07ca05b
x86: sysupgrade: explicitly rescan disk after writing partition table
This should ensure that the kernel partition can be mounted in
platform_copy_config when its size has changed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
a77633d36d
x86: sysupgrade: refactor platform_do_upgrade
By returning early when no upgrade device can be found and handling the
SAVE_PARTITIONS=0 case differently, we can get rid of two levels of if.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
19b84cfff2
x86: sysupgrade: move partition table change check to platform_check_image
The staged sysupgrade will prevent us from using ask_bool in
platform_do_upgrade; therefore, the check is moved to platform_check_image.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Hauke Mehrtens
2be8d34085 x86: fix build of geode target
The build bot complained that the OLPC option was not set.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-27 11:31:10 +02:00
Daniel Golle
62d0b1a444 x86/legacy: disable PAE again
commit 961c0eacea ('x86: fix lifting kernel CPU requirements and always
enable PAE') broke some older geode boards such as Soekris net4826.
Hence disable PAE on x86/legacy again in order to still support those
very old non-PAE capable CPUs.

Fixes FS#773 - PAE broke Soekris net4826

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-05-25 23:50:48 +02:00
Philip Prindeville
910df3f06c x86_64: add drivers for Xeon controller hub based GPIO
These drivers are in many reference-design Xeon, iCore, or
Atom64 based server boards.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-05-25 19:01:07 +02:00
Koen Vandeputte
e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00
Philip Prindeville
0dcc36fc7d kernel: add hwmon for W83627EHF and family
Remove support for NCT6775/6 from W83627EHF driver so the NCT6775
driver will still be used for those chips.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-05-17 00:06:52 +02:00
Daniel Golle
961c0eacea x86: fix lifting kernel CPU requirements and always enable PAE
commit 89878f60f4 x86: lift kernel minimum CPU requirement to Pentium MMX
caused kconfig havoc. Fix this and make sure PAE is enabled even on legacy
CPUs as the minimum required CPU has been Pentium MMX for a while now and
hence PAE is supported even on the x86_legacy target.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-05-05 15:05:30 +02:00
Jo-Philipp Wich
bf58e39b9b x86/legacy: add missing config symbol
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-05 10:20:52 +02:00
Daniel Golle
89878f60f4 x86: lift kernel minimum CPU requirement to Pentium MMX
Anything older than that isn't supported since commit f4f8f4a180,
hence also switch to Pentium MMX when building the kernel.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-05-05 09:53:44 +02:00
Daniel Golle
641a65fd06 x86: generic: use HIGHMEM64G instead of HIGHMEM4G
commit 4b4f739373 switched on HIGHMEM4G which implicitely disabled
PAE and hence also NX and other useful and security-relevant features.
Re-enable PAE by switching to HIGHMEM64G.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-05-05 09:51:17 +02:00
Daniel Golle
63571cb56c x86: keep /boot mounted for kexec
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-05-05 07:12:47 +02:00
Jo-Philipp Wich
4b4f739373 x86: enable 4G high memory support for generic (32bit) subtarget
This is required to fully support a number of 32bit x86 systems equipped
with more than one GB ram, e.g. certain Atom CPU machines.

Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-04-27 15:19:18 +02:00
Philip Prindeville
7fe5963be0 build: allow specifying flow-control to grub on serial console
On the more sophisticated (i.e. deeper FIFO) serial controllers,
flow-control might be needed to avoid dropping output.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-04-03 08:51:02 +02:00
Felix Fietkau
9b940fe80d x86: enable ACPI support for the Geode subtarget
Most or all newer Geode device have ACPI hardware support
Should fix FS#577

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:51:24 +01:00
Rafał Miłecki
425f958830 x86: image: drop duplicated copy of bzImage into vmlinuz
It's already done once few lines earlier in the Image/Build/iso.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-16 11:28:33 +01:00
Michael Marley
51130b9927 kernel: Add intel_idle driver to x86_64 build
This driver supports CPU-specific idle features on recent Intel
processors.  It does not conflict with the ACPI idle driver and
that driver will continue to be used for unsupported and non-Intel
processors.

Signed-off-by: Michael Marley <michael@michaelmarley.com>
2017-03-14 13:28:04 +01:00
Michael Marley
39df43b9e5 kernel: Add coretemp driver to x86_64 build
The x86_64 build already has the k10temp driver for AMD processors
built in, so this patch adds the coretemp driver for the same
functionality on Intel processors.

Signed-off-by: Michael Marley <michael@michaelmarley.com>
2017-03-14 13:28:04 +01:00
Rafał Miłecki
f5d403488e x86: image: drop unneeded grub call
It appears there isn't any Image/Build/grub/* define so this step looks
redundant.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-12 15:06:52 +01:00
Rafał Miłecki
9a267e6a4b x86: image: drop unused ROOTDELAY variable
It's unused since commit 7427007193 ("x86: remove the olpc subtarget,
it has been unmaintained for a long time").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-12 15:06:52 +01:00
Felix Fietkau
b24d91faf1 kernel: enable hwmon-k10temp in the x86/64 kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-26 13:31:51 +01:00
Alif M. Ahmad
2712497442 x86_64: Add support for EFI framebuffer (FS#515)
CONFIG_FB_EFI and CONFIG_FB_SIMPLE are needed to display console text on
EFI framebuffer.

CONFIG_FB_EFI is needed when the kernel is directly launched via EFI
shell or EFI startup.nsh script.

CONFIG_FB_SIMPLE is needed when launching the kernel via grub2 efi. In
this case, grub2 has prepared a gfxterm framebuffer and the kernel just
need to use the already prepared grub's gfxterm framebuffer to display
console text.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-02-21 16:07:09 +01:00
David Woodhouse
d16f433e42 x86: Add Geos profile for Geode subtarget
This makes the Geode images actually useful again. The Geos profile
should include the relevant hardware for that board, and the Default
profile adds the via-rhine adapter which seems to have been present in
the net5501 and alix targets killed in commit 9e0759ea26 ("x86: merge
all geode based subtargets into one").

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2017-02-17 10:30:38 +01:00
Chris Blake
9a6c932556 x86: Add board configs for the PC Engines APU2
This adds the default LED and network settings for the PC Engines APU2
when running under the x86 target.

[dwmw2: Change Ethernet port setup]
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-02-15 07:52:28 +01:00
David Woodhouse
add465f1be x86: Enable DIAG LED on Geos
Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's
do it by using the LED configuration instead of hard-coding it for each
board type. And try using /bin/board_detect to do the default behaviour,
on the first boot where the config hasn't yet been generated.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2017-02-15 07:52:28 +01:00
Chris Blake
27a635f0b4 x86: Move Traverse Geos configs into x86 base-files
This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-02-15 07:52:28 +01:00
David Woodhouse
657418db68 x86: Add configuration back for Traverse Geos
When we merged all the Geode boards into one generic target, the default
network and LED configuration was lost. Put it back.

Fixes: 9e0759ea26 ("x86: merge all geode based subtargets into one")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2017-02-11 20:34:07 +01:00
Felix Fietkau
83ab1982b4 x86: remove linux 4.4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-07 17:30:39 +01:00
Felix Fietkau
92bda4ae5c x86: switch to Linux 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-07 17:30:35 +01:00
Stijn Segers
20996edd68 Kernel: bump to 4.4.44
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-01-27 11:18:27 +01:00
Chris Blake
e3271d545d x86/64: Enable GPIO sysfs & GPIO LED support
The following changes enables GPIO sysfs as well as the LEDS_GPIO option
within the kernel. This is required to enable LEDs over a GPIO
interface.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-27 11:18:27 +01:00
Felix Fietkau
b02c381b4b x86: fix sysupgrades on disks with 4k block size
Even when the disk uses 4k blocks, the partition table still uses units
of 512 byte sectors. Always use ibs=512 for the offsets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 08:13:15 +01:00
Felix Fietkau
f4f8f4a180 x86: unify CPU_TYPE for legacy and geode
According to some reports, -march=pentium-mmx is a better choice for
older Geode CPUs than -march=geode anyway.

Bump the minimum architecture of the legacy target from i486 to
pentium-mmx. Anything older is not worth supporting anyway.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
Chris Blake
0d9f922230 x86: add kernel module for sp5100_tco watchdog
This change adds the sp5100_tco driver as a kernel module for the x86
target. Specifically, this can be used by the PCEngines APU2/APU3. The
reason for having this as a kernel module is to allow users to
load/unload it on demand, as the I2C interface on the APU2/APU3 will not
work while this module is loaded. More info can be found on GitHub at
https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Chris Blake
4fab08183b x86: Add sp5100_tco AMD patches
This adds the following patches to the x86 target:

sp5100_tco: Add AMD Mullins platform support
sp5100_tco: Add AMD Carrizo platform support
sp5100_tco: fix the device check for SB800 and later chipsets
watchdog: sp5100_tco: properly check for new register layouts

With these added, the sp5100_tco driver can then be used on newer AMD
platforms, such as the PCEngines APU2/APU3 boards.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Felix Fietkau
371b382a40 x86: remove the xen_domu subtarget
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau
1d6879eedd x86/generic: add xen DomU support
Copy the relevant config options from the xen_domu subtarget

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau
749918911d x86: disable crashlog
It could cause crashes with some forms of virtualization, and it is
unlikely to work properly with most systems.
It's safer to just disable it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 15:15:09 +01:00
Felix Fietkau
e38fd1eced x86: disable a workaround for a buggy glibc version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 15:13:59 +01:00
Felix Fietkau
83eef37400 x86/64: enable the fusion scsi driver
Is it used by VMware Fusion by default. This allows images to boot
without further config changes in VMware.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 10:23:42 +01:00
Cezary Jackiewicz
4235cd0d95 x86: add kernel module for AMD CS5535/CS5536 audio chipset
Add support for the integrated AC97 sound device on motherboards
with AMD CS5535/CS5536 chipsets.
Tested on Wyse Winterm S30.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2017-01-06 15:35:20 +01:00
Yousong Zhou
6f61d8511e base-files: export x86 platform upgrade functions to common.sh
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Yousong Zhou
fa37bdc05a x86: move sysupgrade.tgz only if it exists
To squash error messages at boot time

    mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:13 +01:00
Stijn Tintel
301301da2b x86/64: enable AES-NI support in kernel
The kernel will detect if the host supports this, so we can just enable
it in the kernel config.

Tested on an APU2 with AES-NI support and a KVM VM on a Xeon E5520 host
without AES-NI support.

Throughput over an IPsec tunnel between these 2 hosts increased from
~63Mbps to ~140Mbps. Ciphers: AES_GCM_16_256/PRF_HMAC_SHA2_512/ECP_521.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:19:58 +01:00
Sven Roederer
19059d84a4 linux: correct deps for x86-xen-domu target
depending packages have been moved to kernel-config
- kmod-xen-kbddev in 9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in 018807d

this will also fix imagebuilder

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2016-12-28 10:35:02 +01:00
Tedaz
1831e61699 x86/64: enable Hyper-V support in the x86_64 kernel config
Enabled Hyper-V network interface card driver, display adapter driver,
storage driver, keyboard driver, mouse driver and Hyper-V utility and
EFI boot support in the kernel for subtarget x86/64.
Convert the img file to vhd by Ubuntu qemu-img, rather than by the buildroot's
built-in qemu-img.

Tested on Windows Server 2008 r2 and 2012 r2 Gen1 and Gen2 VMs.

Signed-off-by: Tedaz <tedaz99999@hotmail.com>
2016-12-22 16:42:19 +01:00
Alexandru Ardelean
81a2f9d6f8 target/linux/x86/image: add explicit prefix to grub-mkimage command
In the latest version of grub-mkimage, the prefix option is mandatory.
Not supplying it fails with:
```
Prefix not specified (use the -p option).
```

In grub-2.02-beta2 a DEFAULT_DIRECTORY was defined
in `include/grub/osdep/hostfile_unix.h` as:
```
 #if defined (__NetBSD__)
 /* NetBSD uses /boot for its boot block.  */
 # define DEFAULT_DIRECTORY  "/"GRUB_DIR_NAME
 #else
 # define DEFAULT_DIRECTORY  "/"GRUB_BOOT_DIR_NAME"/"GRUB_DIR_NAME
 #endif
```

Where:
* GRUB_BOOT_DIR_NAME == boot
* GRUB_DIR_NAME == grub

This was used if the -p option was omitted.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Wilfried Klaebe
81e3c022e0 x86: fix GRUB_ROOT for Xen subtarget
Change grub's root device to xen/xvda,msdos1 for the x86_xen_domu
target so that it will boot without further changes.

Signed-off-by: Wilfried Klaebe <w+lede-project@chaos.in-kiel.de>
[Jo-Philipp Wich: fixed and rebased patch from FS#264, added subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-19 11:45:29 +01:00
Andreas Ziegler
40a16fec6a
x86-generic: add MMC support to boot off SD cards
MMC support has been added to x86-64 a while ago, there is no reason not
to support it in x86-generic as well.

Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
[Matthias Schiffer: add commit message]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-16 01:48:19 +01:00
Andreas Ziegler
cf8aa18040
x86: add PATA support to generic and 64 subtargets
PATA support has been removed from x86-generic without any note in LEDE
r538. Not including them makes the generated images incompatible with older
(and some newer) hardware without any significant gain.

Add it back, and also add the same drivers (as far as available) to x86-64.

Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
[Matthias Schiffer: add back x86-generic, update commit message]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-16 01:48:19 +01:00
Matthias Schiffer
fe6a3415e0
x86: refresh generic subtarget config
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-16 01:48:19 +01:00
Yousong Zhou
d1000f81a8 x86: 64: enable pci hotplug and acpipnp
This will allow dynamically adding/removing at least virtio-net pci
devices which are quite the norm in cloud environment with QEMU/KVM

    netdev_add bridge,id=wan2,br=br-wan,helper=/home/yousong/.usr/libexec/qemu-bridge-helper
    device_add virtio-net-pci,id=devwan2,netdev=wan2,mac=11:22:33:22:11:00

The config was formed by selecting target x86/64 first, then select
CONFIG_HOTPLUG_PCI and CONFIG_HOTPLUG_PCI_ACPI with

    make kernel_menuconfig CONFIG_TARGET=subtarget

The following text tries to explain how the current config was formed

 1. CONFIG_PCI_LABEL and CONFIG_ATA_PIIX were removed because they were
    already enabled in x86 platform config
 2. CONFIG_ATA_SFF was removed because it was enabled in generic config
 3. CONFIG_NLS was removed because it will be selected by CONFIG_PCI_LABEL

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-10-13 17:04:26 +02:00
Mathias Kresin
92eaf27c62 use immediate set in target Makefiles
No functional change, it's just to have the same style everywhere. This
way I don't need to use any regex magic to extract all subtargets for
compile tests.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-10 15:30:38 +02:00
Felix Fietkau
ca356887ed x86: disable MTD support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau
be59b1718d x86: drop the use of block2mtd, use ext4/f2fs as overlay filesystem
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau
c6eb09d5a3 x86: enable mkf2fs and e2fsprogs by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau
580f24bc96 x86: enable f2fs and loopback device support in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau
056ce2474d x86: enable fpu for all subtargets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-30 10:51:21 +02:00
Lucian Cristian
d3b21bb2bb x86: enable CPU frequency scaling
CPU frequency scaling enables the operating system to scale the CPU
frequency up or down in order to save power. CPU frequencies can be
scaled automatically depending on the system load, in response to ACPI
events, or manually by userspace programs.

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2016-08-03 15:30:13 +02:00
Felix Fietkau
eceb6b924a x86: remove obsolete reference to $(PROFILE)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Florian Klink
4221288db7 x86/generic: enable CONFIG_SATA_VIA
This enables support for VIA SATA.
2016-07-19 14:26:32 +02:00
Lucian Cristian
2ea76bdf04 x64: add legacy IDE, fix VirtualBox bug #84 and Fujitsu Futro S550-2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2016-07-12 15:44:34 +02:00
Felix Fietkau
e892472b1e x86: enable kmod-igb on 64-bit by default
It is used on APU2 devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 19:43:18 +02:00
Felix Fietkau
d5ee23ee27 x86: stop relying on hexdump for image build signature
Use perl to generate random number instead.
See https://github.com/freifunk-gluon/gluon/issues/811

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 18:39:11 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Daniel Golle
febc6cc5bf x86: lift generic x86-32 target
* build for pentium4 instead of i486
* enable PAE
* enable EFI support
* enable KVM guest and host support

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-07 08:58:40 +02:00
Daniel Golle
6c2fc113f3 x86: reorganize x86_32 support
copy current 'generic' target to new 'legacy' target.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-07 08:58:40 +02:00
Jo-Philipp Wich
699f7ecd15 x86: use sysfs DMI information to populate sysinfo
Use the DMI data available in sysfs to extract manufacturer and model info
and write it to /tmp/sysinfo/.

The data will be picked up by board_detect and can be used by e.g. LuCI to
display a more appropriate model description.

On an APU board the files will contain the following values:

    # cat /tmp/sysinfo/model
    PC Engines APU

    # cat /tmp/sysinfo/board_name
    pc-engines-apu

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-06 15:18:11 +02:00
Jo-Philipp Wich
b8b23e0e64 x86: enable DMI and DMI_SYSFS
Enable support for DMI decoding in the kernel so that we can access
manufacturer and model information via sysfs.

Also remove redundant per-subtarget DMI overrides and preset a few
previously unset symbols popping up due to the now enabled DMI support.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-06 15:18:03 +02:00
Jo-Philipp Wich
1012701014 x86: generalize partition discovery for sysupgrade
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 13:30:58 +02:00
Russell Senior
0fd183c155 x86_64: enable mmc to support booting off sd
Improved support for PCEngines APU

Signed-off-by: Russell Senior <russell@personaltelco.net>
2016-05-23 12:17:55 +02:00
Felix Fietkau
98010ab489 kernel: remove ocf support, cryptodev-linux should be used instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 19:35:32 +02:00
Felix Fietkau
825ef34f15 x86: remove defunct etherboot image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:46:39 +02:00
Felix Fietkau
900b4865b8 x86: remove obsolete Config.in file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:46:14 +02:00
Felix Fietkau
cebc410d02 x86: remove rdc specific kernel patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:42:55 +02:00
Felix Fietkau
2e5f84fc10 x86: remove legacy script/makefile code for rdc devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:39:04 +02:00
Felix Fietkau
ca12fd431d x86: remove obsolete modules.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:36:34 +02:00
Felix Fietkau
018807ded3 x86/xen_domu: enable xen drivers in the kernel config instead of packaging them as modules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:35:46 +02:00
Felix Fietkau
303a241478 x86: enable grub at_keyboard support for x86_64
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:00:53 +02:00
Felix Fietkau
7d7fb75df5 x86: remove the kvm_guest subtarget
32-bit only hardware that supports kvm is very rare.
It's not worth keeping a separate subtarget for this.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:00:53 +02:00
Felix Fietkau
959bc143a0 x86/64: add more hardware RNG drivers, including for virtio
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:00:53 +02:00
Felix Fietkau
167404ceb5 x86/64: enable virtualization support for spinlocks to improve kvm performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:00:53 +02:00
Felix Fietkau
bc0ea9c273 x86: remove maintainer override for x86_64
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 16:20:36 +02:00
Felix Fietkau
dee8986b95 x86: remove the ep80579 subtarget, it has been unmaintained for a long time
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 16:09:47 +02:00
Jo-Philipp Wich
ec5680a73d x86: remove old references to kmod-acpi-button
The kmod-acpi-button functionality is included in the kernel where needed
and the corresponding kmod package has been deleted long ago, therfor drop
the remaining references now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-25 14:14:47 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
Jo-Philipp Wich
e885286834 target: globally remove ARCH_PACKAGES overrides
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-17 19:55:09 +02:00
Jo-Philipp Wich
924fb794bd x86: search PARTUUID in any block device
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-03-30 03:19:23 +02:00
Jo-Philipp Wich
9f422eba7c x86: make sysupgrade work without partx
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-03-30 03:10:51 +02:00
John Crispin
fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
Hauke Mehrtens
8a7b28071f x86: fix platform_export_bootpart() for Xen virtual disks
Virtual disk devices in a Xen virtual machine (DomU) can be /dev/xvda,
/dev/xvdb and so on with partitions like /dev/xdva1. Devices named like
this where not considered before. This resulted in a non working
sysupgrade, because the boot partition could not be found.

Signed-off-by: Alexander Dahl <alex@netz39.de>
Suggested-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49190
2016-04-17 13:24:30 +00:00
Hauke Mehrtens
683c046673 kernel: add missing config options
The buildbots complained about these config options being missing for arm64:
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48929
2016-03-05 16:22:45 +00:00
Jo-Philipp Wich
4aeeead303 x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48682
2016-02-09 12:33:17 +00:00
Jo-Philipp Wich
6ec31a8487 x86: remove unrelated config override
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48668
2016-02-08 10:58:27 +00:00
Felix Fietkau
ad3220aa8b x86: remove redundant default network config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48530
2016-01-28 18:19:59 +00:00
Hauke Mehrtens
495badf6d1 x86: add BACKLIGHT_APPLE configuration option
This closes #21713.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48502
2016-01-25 23:29:18 +00:00
Hauke Mehrtens
1c7c997019 kernel: add some missing kernel config options
The built bots found these missing kernel configuration options.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48477
2016-01-24 18:00:53 +00:00
Jo-Philipp Wich
1865710fc8 x86/64: add missing kernel symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48476
2016-01-24 15:36:10 +00:00
Felix Fietkau
c28fb1f4fc x86_64: Add missing symbols
Update to kernel 4.4 missed some symbols, fix that.

SVN-Revision: 48453
2016-01-22 12:02:07 +00:00
Felix Fietkau
57690041fa kernel: clean up redundant SLUB/SLAB related defines for 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48443
2016-01-21 16:08:19 +00:00
Felix Fietkau
c26dec971e x86: fix kernel crash on geode devices (#21667)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48428
2016-01-21 13:28:25 +00:00
Hauke Mehrtens
ba3a749f9b kernel: refresh patches for kernel 4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48222
2016-01-12 20:50:41 +00:00
Felix Fietkau
2172d7dbbf x86: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48216
2016-01-12 10:04:55 +00:00
Felix Fietkau
fed29fa36b x86: remove obsolete patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48190
2016-01-10 17:19:51 +00:00
Felix Fietkau
b34a86691f x86: remove the rdc subtarget, it was broken for ages and nobody cared
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48189
2016-01-10 17:19:46 +00:00
Felix Fietkau
23fbd97649 x86: add generic profiles to x86_64, kvm_guest and xen_domu
The imagebuilder requires a profile for every subtarget to work.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47421
2015-11-08 20:39:24 +00:00
Hauke Mehrtens
55a912f43e kernel: update kernel 3.18 to version 3.18.23
Changelog:
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47334
2015-11-01 13:45:57 +00:00
Felix Fietkau
9cd525a7fa x86/generic: enable radeon drm driver
This enables modesetting for radeon based boards.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 47305
2015-10-30 22:32:41 +00:00
Felix Fietkau
63f2b8afbf x86/generic: enable pata_atiixp driver
This enables booting from devices that use an ATI PATA controller for
the boot device, such as the embedded CF cards in Fujitsu-Siemens Futro
thin-clients.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 47304
2015-10-30 22:32:19 +00:00
Felix Fietkau
05d6b87cfb x86/generic: refresh subtarget kernel config
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 47303
2015-10-30 22:32:12 +00:00
Felix Fietkau
d6408aa9b4 x86/geode: enable DMI and Geos support (fixes #20512)
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 46986
2015-09-17 10:15:52 +00:00
Felix Fietkau
ef447c9a5f x86: fix Geode LX timekeeping (#20531)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46985
2015-09-17 10:15:45 +00:00
John Crispin
74bbc08651 x86: add missing symbol
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46973
2015-09-16 08:33:18 +00:00
Felix Fietkau
5b76e57dc2 kernel: remove kmod-crypto-aes, AES crypto support is always built into the kernel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46483
2015-07-24 15:36:08 +00:00
John Crispin
4a1021de87 x86: add kmod-acpi-button and kmod-button-hotplug to default packages
Since r40909 openwrt can automatically shutdown when you press the
power button or try to shutdown a kvm virtual machine.
When booting a recent CC-rc2 or trunk image, it doesn't work,
as two kernel modules are missing.

Add these two kernel modules to the default packages, so users
don't need to install them manually.

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>

SVN-Revision: 46366
2015-07-14 16:24:02 +00:00
John Crispin
096b3759a9 build: Prevent more gzip timestamps
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 46361
2015-07-14 09:57:45 +00:00
Hauke Mehrtens
e914c31d4c x86: Make virtualization guests built for pentium4 with SMP
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 46314
2015-07-12 19:26:48 +00:00
John Crispin
f8eaad100b x86/xen_domu: enable image generation
Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.

This fixes #18074.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

SVN-Revision: 46233
2015-07-07 13:46:26 +00:00
Jo-Philipp Wich
6f197501b7 x86/64: enable VirtIO block and console support
This is required to use x86/64 in KVM containers with VirtIO disks

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46017
2015-06-17 11:31:45 +00:00
Jo-Philipp Wich
ae1f0d3eb4 x86/64: add e1000e to the default packages
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45814
2015-05-29 08:20:58 +00:00