31365 Commits

Author SHA1 Message Date
Daniel Golle
36bde27e79 mediatek: add work-around for ASUS bootloader MTD behavior
ASUS makes use of U-Boot's fdt_fixup_mtdparts() function which applies
the partitions defined in U-Boot's mtdparts and mtdids environment
variables to the devicetree passed over to Linux.

The undesired side-effect is that in this way also all additional
properties and child nodes get wiped, preventing NVMEM cells to be
defined for MTD partitions or UBI volumes.

To work-around this issue, add an additional compatible string
'u-boot-dont-touch-spi-nand' which can be used instead of 'spi-nand' in
case the replacement of the MTD partitions by U-Boot should be skipped
alltogether.

In practise this is mostly relevant for SPI-NAND which anyway comes only
with two partitions nowadays: 'Bootloader' and 'UBI_DEV'. Hence this
work-around is applicable for SPI-NAND only. Similar work-arounds for
other MTD devices can be created as well should they actually be needed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit c48afca32ca875c4176b4c41be94335e61556783)
2025-02-16 20:43:53 +00:00
Paweł Owoc
4c9cae1906 qualcommax: ipq807x: add support for Linksys MX4300 (LN1301)
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Hardware specification:
========
SoC: Qualcomm IPQ8174
Flash: 1GB (Micron MT29F8G08ABBCAH4 or AMD/Spansion S34MS08G2)
RAM: 2GB (2x Kingston B5116ECMDXGJD or ESMT M15T2G16128A DDR3L)
Ethernet: 4x 10/100/1000Mbps (Qualcomm QCA8075)
WiFi1: 5GHz ax 2x2 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64 (low band)
WiFi2: 2.4GHz ax 2x2 (Qualcomm QCN5024 + Skyworks SKY85340-11)
WiFi3: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 100-177 (high band)
LED: 1x RGB status (NXP PCA9633)
USB: 1x USB 3.0
Button: WPS, Reset

Flash instructions:
========
1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin image.
More details can be found here: https://support.linksys.com/kb/article/6564-en/
After first boot check actual partition:
- fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
- mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin kernel
and in case of 1:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin alt_kernel

2. Installation using serial connection from OEM firmware (default login: root, password: admin):
- fw_printenv -n boot_part
In case of 2:
- flash_erase /dev/mtd21 0 0
- nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin
or in case of 1:
- flash_erase /dev/mtd23 0 0
- nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin
After first boot install firmware on second partition:
- mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin kernel
or:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin alt_kernel

3. Installation from initramfs image using USB drive:
Put the initramfs image on the USB drive:
- dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx4300-initramfs-uImage.itb of=/dev/sdX
Stop u-boot and run:
- usb start && usbboot $loadaddr 0 && bootm $loadaddr
Write firmware to the flash from initramfs:
- mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin kernel
and:
- mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin alt_kernel

4. Back to the OEM firmware:
- mtd -e kernel -n write FW_MX4300_1.0.4.215382_prod.img kernel
and:
- mtd -r -e alt_kernel -n write FW_MX4300_1.0.4.215382_prod.img alt_kernel

5. USB recovery:
Put the initramfs image on the USB:
- dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx4300-initramfs-uImage.itb of=/dev/sdX
Set u-boot env:
- fw_setenv bootusb 'usb start && usbboot $loadaddr 0 && bootm $loadaddr'
- fw_setenv bootcmd 'run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi'

Co-authored-by: Qiyuan Zhang <zhang.github@outlook.com>
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16070
(cherry picked from commit 4d310b176be9eea162159f2501e650ebbd6605e9)
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17889
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-02-16 13:03:23 +01:00
Qiyuan Zhang
45ce95a9b3 qualcommax: add kernel cmdline replacement hack
Add kernel command line replacement hack to qualcommax. Now we can
find and replace arguments in the kernel command line by setting
bootargs-find-1, bootargs-replace-1, bootargs-exact-match-1
and bootargs-find-2, bootargs-replace-2, bootargs-exact-match-2
under the chosen node in the device tree.

This hack replaces the first occurence of bootargs-find-X with
bootargs-replace-X. When bootargs-exact-match-X is set to "y",
then the replacement happens only if the kernel command line is
identical to bootargs-find-X.

Signed-off-by: Qiyuan Zhang <zhang.github@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/16070
(cherry picked from commit 337f6f76ca5361f45e76facd52396936b9fc25c0)
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17889
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-02-16 13:03:23 +01:00
Paweł Owoc
b02cdced3f qualcommax: ipq807x: fix mac setup for Linksys MX4200v2
Currently for Linksys MX4200v2 all u-boot ethXaddr variables share the same MAC address
and there is no need to check them one by one.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16070
(cherry picked from commit 80c867815636cbf32e85b431c5d06c531e4a371e)
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17889
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-02-16 13:03:23 +01:00
Paweł Owoc
1252e16f77 qualcommax: ipq807x: define configuration for Linksys MX4x00 devices
Define shared configuration for Linksys MX4x00 devices.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16070
(cherry picked from commit 73fc1e0aa2d9956561915e342d098a6881ec85a3)
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17889
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-02-16 13:03:22 +01:00
Paweł Owoc
deccf0e37b qualcommax: ipq807x: create generic Linksys MX4x00 dts
Create a generic Linksys MX4x00 dts file and extract the specific configuration
for MX4200v1/v2 to a new file.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16070
(cherry picked from commit ff85f883ea94f562af618fb26ba8b5e85e572d64)
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17889
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-02-16 13:03:22 +01:00
Paweł Owoc
708a81fb8b qualcommax: ipq807x: remove unnecessary bootargs-append for MX4200
The default value for the "root" parameter is "/dev/ubiblock0_0"
and there is no need to append it to bootargs.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16070
(cherry picked from commit fee2d93b276f3c44dad83849f9959638ce495de7)
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17889
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-02-16 13:03:22 +01:00
Shiji Yang
cc5bc05a0e Revert "Revert "ramips: mt7620: fix patching mac address in caldata""
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
This reverts commit f628467dfd6b32ead172d33a2593f04901395343.

The initial fix was correct. However, a recently introduced bug in
base-files can cause some unexpected byte overwriting in eeprom.
Since it has been fixed, let's accept this patch again.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17892
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 43bc5e6e122b06eb9bfd22cf0bdf3212b84073f3)
2025-02-13 00:32:30 +01:00
Shiji Yang
9b05ca988c ramips: mt7620: add missing PA/LNA pinctrl for Linksys E1700
This device has high-power external PA and LNA[1]. So we must
configure PA/LNA pins to make the wireless work properly.

[1] https://fccid.io/Q87-E1700/Internal-Photos/Internal-Photos-pdf-2135639.pdf
Fixes: https://github.com/openwrt/openwrt/issues/7959
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17892
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 3aa9b708364fd4a46c8466750f51069e22f3dde7)
2025-02-13 00:32:30 +01:00
Lech Perczak
424d758d1f ath79: mikrotik: fix reference clock of Routerboard 911G
When support for Routerboard 911G was introduced, Routerboad 912UAG
device tree was used as a base, and the common part. This led to use of
40MHz as the reference clock frequency for both [1], while RB911G uses 25MHz
crystal on the board, causing heavy system clock drift.

Split the definition, and set the reference clock frequency for RB911G
back to 25MHz.

[1] a716ac556497 ("ath79: fix reference clock for RouterBoard 912UAG")

Fixes: bcc44b1212b2 ("ath79: support for MikroTik RouterBOARD 911G-(2,5)HPnD")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17944
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 40fc6bd5cc679875e38ea1769527affdb5be12ba)
2025-02-13 00:32:30 +01:00
Pietro Ameruoso
5b78205343 mediatek: filogic: fix mt7986a-zyxel-ex5601-t0-stock.dts model name and eth1 wan definition
Fix the model name to reflect the stock partitioning and the wan eth1 detection in the 02_network script.

Fixes: https://github.com/openwrt/openwrt/issues/14432
Fixes: b5df398a36f1 ("mediatek: add Zyxel EX5601-T0 with uboot custom partition")
Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it>
Link: https://github.com/openwrt/openwrt/pull/17859
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit d023ee7439f6d5c9bffa6f6e10b3b90f5782e84d)
2025-02-13 00:32:30 +01:00
Felix Fietkau
f47125f664 build: fix building llvm tarball
Add missing select NEED_BPF_TOOLCHAIN in order to ensure that the toolchain
actually gets built.

Fixes: https://github.com/openwrt/openwrt/issues/17926
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 04570f5ee2dfe6609c22d2d21678b14cd3314309)
2025-02-10 22:12:06 +01:00
Tim Harvey
c4f5028bdf imx: coretexa53: add network configuration for gw82xx-2x
Some checks failed
Build all core packages / Build all core packages for selected target (push) Waiting to run
Build Kernel / Build all affected Kernels (push) Has been cancelled
The GW82xx-2x has two network ports. By convention, the first
port (eth0) should be the WAN port and the second port (eth1)
should be the LAN port.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/17717
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17762
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit d2eaaa90d502fa418d7d9bb8d4e6ccbe0131c832)
2025-02-09 23:27:02 +01:00
Tim Harvey
7feb8be5e4 imx: 6.6: add a patch to work around a PCI init hang on IMX8M{M,P}
The act of attempting link at gen1 then trying to link at higher speeds
causes a hang with the specific PCIe switch used on the Gateworks Venice
boards. Work around this by linking at the highest speed first as is
common with all other PCI controller drivers.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/17717
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17762
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 23a18a57cf750d9081353cdd34e44982ea10e191)
2025-02-09 23:26:39 +01:00
Tim Harvey
e2b064f5a4 imx: 6.6: add some backported kernel patches for Gateworks Venice
Add several dt backports for the Gateworks Venice product family.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/17717
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17762
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 1ce87cf25c19f030b81954639545db2ab7f17062)
2025-02-09 23:26:13 +01:00
Tim Harvey
fa64175e1a generic: 6.6: add backported btsdio patch for cyw437
Add a backport of a btsdio patch for the cyw437 bluetooth controller.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/17717
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17762
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit c9f11523dd5b8639b24b97043d70f2a197a00a84)
2025-02-09 23:25:46 +01:00
Mikhail Zhilkin
db30b60bf1 mediatek: fix nmbm configuration mismatch (Xiaomi AX3000t)
This commit fixes nmbm configuration mismatch error on Xiaomi AX3000t
with Winbond W25N01KVZEIR spi-nand:
'''
[    0.786783] NMBM configuration mismatch
'''

Root cause:
1. U-Boot W25N01KV spi-nand driver ia compiled with 64B OOB size for the
   chip and store this size in the nmbm signature;
2. Linux W25N01KV driver use 96B OOB.

The change doesn't affect AX3000t variants with other spi-nand chips
(ESMT, Foresee) because their Linux drivers use 64B OOB.

Fixes: openwrt#16972
Tested-by: Aleksandr Danilov <sc16me@gmail.com>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17549
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 3299d19c01080c3320e3ff6964d7825da81bb8b4)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17898
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-02-09 23:19:11 +01:00
Mikhail Zhilkin
37cc725b1a kernel: nmbm: add mediatek,bmt-mtd-overridden-oobsize property
This commit adds new "mediatek,bmt-mtd-overridden-oobsize" property. The
property helps avoid "NMBM configuration mismatch" error if mtd "OOB size"
is not equal to the "spare size" which is stored in the nmbm signature.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17549
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit e585ae70d4f2a563b3b0e430e15ee19ad25caeb5)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17898
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-02-09 23:19:11 +01:00
Álvaro Fernández Rojas
e4d840b312 generic: 6.6: backport upstream r8169 patches
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
b11bff90f2ad r8169: add support for RTL8125BP rev.b
b3593df26ab1 r8169: add support for RTL8125D rev.b
b299ea006928 r8169: adjust version numbering for RTL8126
bb18265c3aba r8169: remove support for chip version 11
2e20bf8cc057 r8169: remove unused flag RTL_FLAG_TASK_RESET_NO_QUEUE_WAKE
e340bff27e63 r8169: copy vendor driver 2.5G/5G EEE advertisement constraints

The EEE advertisement patch has been reworked for linux v6.6 because
phy_set_eee_broken() is only present on linux >= v6.13 and eee_broken_modes
declaration has been converted to a bitmap, so linkmode_set_bit() can't be
used either.
e340bff27e
ed623fb8e3
721aa69e70

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 084618f8db7d0e413b47bab3e0ea70804bf84ee2)
2025-02-04 07:30:39 +01:00
Hauke Mehrtens
6df0e3d02a Revert "ramips: mt7620: fix patching mac address in caldata"
This reverts commit 3295f6f1c254cd7e5e5285a05581bf6abbde8999.

It looks like the eeprom gets broken after this change.
I think this change was not tested on a real device before it was
merged.
The MAC addresses will be broken again after this revert.

Fixes: #17818
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit f628467dfd6b32ead172d33a2593f04901395343)
2025-02-04 00:09:37 +01:00
Christian Marangi
cd747cb3aa
ipq806x: fix broken WAN on Linksys EAX and Asrock G10
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Fix broken WAN on Linksys EAX and Asrock G10 by incrementing the WAN
interface MAC address + 1. This caused conflicting entry in the FDB
table and caused the WAN port to malfunction with the DSA conversion.

Fixes: #17157
Fixes: #15585
Fixes: #16604
Link: https://github.com/openwrt/openwrt/pull/17839
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit eba2fbf63814bbcf8c99c98177818476fca808a7)
2025-02-03 01:55:01 +01:00
Shiji Yang
4d213b2ae2 ramips: fix xtal clock registration issue on RT3883
The redundant xtal clock source caused clock registration failure.

Link: https://lore.kernel.org/all/20250108093636.265033-1-sergio.paracuellos@gmail.com/
Fixes: https://github.com/openwrt/openwrt/issues/17677
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17830
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit cfca9d689459426a119edbc02ecb7c778a3c2b77)
2025-02-02 20:36:41 +01:00
Daniel Golle
c1d5de0c59 mediatek: mt7622: fix SATA on BPi-R64
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Two commits which made their way into Linux stable broke the SATA
support on the BPi-R64.

Fix this by reverting a node rename which broke DT-overlay application
and import a (still pending) patch re-adding the 'syscon' compatible to
the pciesys clock-controller which also contains phy-mode bits
referenced by the ahci_mtk driver expecting to access them using
syscon_regmap_lookup_by_phandle().

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 69890e16b37d59b55ba64633522c727f957cb2fd)
2025-02-01 05:10:37 +00:00
Daniel Golle
81db307748 generic: net: phy: realtek: work-around hang on SerDes setup
Some checks failed
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Has been cancelled
On some but not all devices using the RTL8221B 2.5GBit/s PHY the SerDes
setup sequence may hang under some circumstances (eg. <2500M link
partner present during boot).

RTL8221B-VB-CG 2.5Gbps PHY (C45) mdio-bus:01: rtl822xb_config_init failed: -110

Work-around the issue by performing a hardware reset and subsequent
retry of the SerDes setup, which seems to always succeed.

Doing this requires moving ALDPS setup to config_init (which is anyway
the better place for that) as it otherwise doesn't survive the reset.

Also disable listening on MDIO address 0 which may be used by other PHYs
despite being spec'ed as "broadcast address", as bus activity on address
0 may otherwise confuse the RealTek PHY for good reasons.

Tested-by: Luis Mita <luis@luismita.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit c87a767801ef375feadb0a5c41d5a674ad3a7d2c)
Link: https://github.com/openwrt/openwrt/pull/17790
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-01-31 21:38:34 +01:00
Hauke Mehrtens
7a916c75e8 x86: Add kmod-drm-i915 as default package
Add kmod-drm-i915 to the default packages. It was build into the kernel
before and is now build as a kernel module.

Fixes: 77cfe8fd15d3 ("x86: make i915 as a kmod with required firmware")
Link: https://github.com/openwrt/openwrt/pull/17781
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 8390599c9a29dbb0019447df9086cb8667bfd3d7)
Link: https://github.com/openwrt/openwrt/pull/17792
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-01-31 21:37:05 +01:00
Shiji Yang
1a75172721 ramips: pinctrl: allow mux SDXC pins for mt76x8
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
The mt76x8 SDXC pin register definition is incompatible with the
mtmips generic pinctrl driver structure. This hack allows us to
mux the SDXC IO to different pin groups in device tree.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17446
(cherry picked from commit 05ec3b50a8e673786dda0224b23f18b5d96a4a65)
Link: https://github.com/openwrt/openwrt/pull/17754
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-01-29 22:37:05 +01:00
Álvaro Fernández Rojas
e2c2a6ed7f bmips: shg2500: add missing led controller cells
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Fixes the following DT warnings:
../dts/bcm63168-sercomm-shg2500.dts:76.4-14: Warning (reg_format): /ubus/spi@10001000/led-controller@1/led@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/bcm63168-sercomm-shg2500.dts:75.9-78.5: Warning (avoid_default_addr_size): /ubus/spi@10001000/led-controller@1/led@1: Relying on default #address-cells value
../dts/bcm63168-sercomm-shg2500.dts:75.9-78.5: Warning (avoid_default_addr_size): /ubus/spi@10001000/led-controller@1/led@1: Relying on default #size-cells value

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit fbe0bd5f6453a61fab871bee56883afc5c6308cf)
2025-01-28 08:35:57 +01:00
Hauke Mehrtens
50cb934142 apm821xx: NETGEAR WNDR4700: Fix compat version
The definition for the netgear_wndr4700 had two different
DEVICE_COMPAT_VERSION definitions.

In commit 5815884c3a2 ("apm821xx: migrate to DSA"), an additional
DEVICE_COMPAT_VERSION := 3.0 attribute was added to the device
definition. The old one with version 2.0 stayed and was defined later
overwriting the new one.

Replace the old version 2.0 with the new version 3.0

Fixes: 5815884c3a2a ("apm821xx: migrate to DSA")
Link: https://forum.openwrt.org/t/openwrt-24-10-0-rc6-sixth-release-candidate/222466/43
Link: https://github.com/openwrt/openwrt/pull/17741
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit dab52c00d712a421d6e61eebc51359e5d38ad347)
2025-01-27 23:53:29 +01:00
Thomas Richard
d0289daa69 stm32: enable CONFIG_SMSC_PHY
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
The STM32MP135F-DK board uses the LAN8742 PHY.
Enable CONFIG_SMSC_PHY to have full PHY support.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/17745
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit d981f28f762a559ae50386fa089b050aaaa78555)
2025-01-27 15:14:50 +01:00
Anders Melchiorsen
a5eb5ee1a6 ramips: restore full switch performance for USW-Flex
Since commit f1c9afd80138 ("ramips: mt7621-dts: mux phy0/4 to gmac1") the
USW-Flex lan1 port has been attached directly to the CPU. This improves
routing performance but hinders switching.

This is a generally accepted trade-off in that commit but for USW-Flex it
is a questionable choice. This switch is designed to deliver PoE to remote
places and using it as a router is unlikely. Meanwhile, the lan1 port is
also PoE-in and will often be the uplink, carrying most of the traffic.

Reverting f1c9afd80138 for USW-Flex restores full 1 Gbps switching
performance on all ports.

Signed-off-by: Anders Melchiorsen <amelchio@nogoto.net>
Link: https://github.com/openwrt/openwrt/pull/17703
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 62872f8bfd5c8bc80bb014417c6ed8057bbeb773)
2025-01-27 12:56:29 +01:00
Christian Marangi
2bff6e490a
airoha: an7581: replace clock patch with upstream version
Replace clock patch for eMMC with upstream version to add the tag and
flag them as upstreamed.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit a9b408a97f7bf8b1f98f355fefe3c9bfc959d5a6)
2025-01-27 12:15:46 +01:00
Christian Marangi
077a869034
airoha: an7581: replace eMMC support with upstream version
Replace eMMC support with upstream version where we declare dummy clock
and dummy regulator instead of a specific compatible. Also drop the
downstream patch for it.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit b7edf88b0fe15b32be802c7de54036ff8e66dcc1)
2025-01-27 12:04:15 +01:00
Christian Marangi
ea66541032
airoha: an7581: refresh and fix cpufreq patch
Refresh cpufreq with merged upstream version. Also fix the PM Domain
rebased patch to correctly expose the symbol for non Mediatek target.

Update dtsi with new pm domain name.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit fbbfcbf150cd7c72f49c149e7f9b9f4d0bf43e4b)
2025-01-27 11:11:39 +01:00
Eric Fahlgren
e1ba6e407b octeon: ubnt-usg: add board name to supported devices
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
The on-device board name reported by 'ubus call system board' is not present
in the generated profiles.json.  This results in upgrade tools being unable
to match the image with the proper device.  Let's add a 'SUPPORTED_DEVICES'
entry for the board name to fix this.

Links: https://forum.openwrt.org/t/owut-openwrt-upgrade-tool/200035/441
Links: 2a07270180
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17736
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7165937c3b6ebe5ac692fcde1cc69ba1c7a3d9c9)
2025-01-27 02:10:46 +01:00
Paweł Owoc
150aa9aeee ramips: mt7620: fix patching mac address in caldata
Fix usage of non-existent 'caldata_patch_mac' function
by using the 'caldata_patch_data' function.

Fixes: #17734
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17737
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 3295f6f1c254cd7e5e5285a05581bf6abbde8999)
2025-01-27 02:05:02 +01:00
Daniel Golle
d30773abe8 generic: fix probe issues with RealTek RTL8221B PHYs
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Import patch "net: phy: realtek: mark existing MMDs as present"

    When using Clause-45 mode to access RealTek RTL8221B 2.5G PHYs some
    versions of the PHY fail to report the MMDs present on the PHY.
    Mark MMDs PMAPMD, PCS and AN which are always existing according to
    the datasheet as present to fix that.

Fixes: #16823, #17183, #17232
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Tested-by: Juan Pedro Paredes Caballero <juanpedro.paredes@gmail.com>
(cherry picked from commit 730db6b893748517949b1d3a0c0cb8b6c1288040)
2025-01-26 01:12:36 +00:00
Chukun Pan
a296d09dc4 mediatek: cleanup device tree for cudy devices
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Fixes typo for led properties.
Delete the unused rfb compatible.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 64d1b1089c25d778f5f22bfc0c1590a2e83b664e)
2025-01-24 22:43:13 +01:00
Chukun Pan
95dffe39f8 mediatek: update status led for Cudy TR3000
Use white led when running, consistent with the stock firmware.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 87632219d4b8f0c96ea053e375f6f324fab0806f)
2025-01-24 22:42:56 +01:00
Chukun Pan
e5f3704f9a mediatek: cudy: fixes 2.5G PHY interrupt support
Fixed interrupt support for 2.5G PHY.
Removed useless phy-mode on phy node.

Tested on Cudy TR3000.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 82b69dfaf6ca92eeffb7523295d3d81a1d54323a)
2025-01-24 22:42:42 +01:00
Chukun Pan
d6fe142161 mediatek: cudy: fixes typo for spi and mtd properties
Same as commit 3674689, correct 'buswidth' to 'bus-width'.
Move the nmbm properties outside the partition definition.
Change uppercase to lowercase, add missing read-only flag.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit ab375a3484db67857450ced461498ad3d7942e05)
2025-01-24 22:42:39 +01:00
Sergey Ryazanov
a96eaa6456 ipq40xx: fix compatibility with linux-atm tools
atm_qos struct should be the same both for user and kernel spaces. Via
the __SO_ENCODE() macro it is used to define the SO_ATMQOS socket IOC.

During the VRX518 support introduction, the atm_trafprm sturct nested
into the atm_qos stucture was update with newer fields that are
referenced by the ATM TC layer of the VRX518 TC driver. These new fields
are intended to communicate information for extra traffic classes
supported by the driver. But we are still using vanilla kernel headers
to build the toolchain. Due to the atm.h header incoherency br2684ctl
from linux-atm tools is incapable to configure the ATM bridge netdev:

  br2684ctl: Interface "dsl0" created sucessfully
  br2684ctl: Communicating over ATM 0.1.2, encapsulation: LLC
  br2684ctl: setsockopt SO_ATMQOS 22 <-- EINVAL errno
  br2684ctl: Fatal: failed to connect on socket; File descriptor in bad state

There are two options to fix this incoherency. (a) update the header
file in the toolchain to build linux-atm against updated atm_trafprm and
atm_qos structures, or (b) revert atm_trafprm changes.

Since there are no actual users of the extra ATM QoS traffic classes,
just drop these extra traffic classes from vrx518_tc ATM TC layer and
drop the kernel patch updating atm.h.

Besides fixing the compatibility with linux-atm tools, removing the
kernel patch should simplify kernel updates removing unneeded burden of
maintenance.

Run tested with FRITZ!Box 7530 with disabled extra traffic classes and
then removed them entirely before the submission.

CC: John Crispin <john@phrozen.org>
Fixes: cfd42a0098 ("ipq40xx: add Intel/Lantiq ATM hacks")
Suggested-by: Andre Heider <a.heider@gmail.com>
Reported-and-tested-by: nebibigon93@yandex.ru
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250122222654.21833-4-ryazanov.s.a@gmail.com/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 6d6dc3a3c967174598a44503f4af281574660356)
2025-01-24 22:26:20 +01:00
Florian Maurer
0ba00ec205 mediatek-mt7622: netgear-wax206 fix wifi leds
the wifi leds of the wax206 were not reacting.
This patch enables the green leds to show activity, as the blue ones are very bright.
Also set the label-mac to the gmac0

Signed-off-by: Florian Maurer <f.maurer@outlook.de>
Link: https://github.com/openwrt/openwrt/pull/17694
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9ada8578fd2768d077607b189987972ad600a804)
2025-01-24 22:25:43 +01:00
Sander Vanheule
7a1da5486f realtek: Fix old compatible for HPE 1920-8G PoE
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Supported devices are listed in the metadata as the first part of the
DTS compatible. This normally follows the format "vendor,device".

When updating the device name of the 180W 1920-8G PoE an underscore was
used, instead of a comma, to join the vendor and device name. This will
lead to warnings for users wanting to sysupgrade a device with an older
compatible, as the device's info does not match the one the metadata.

Fixes: 987c96e88927 ("realtek: rename hpe,1920-8g-poe to match hardware")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
(cherry picked from commit 6a7fa68569ac11bb2c2abb14026e8b84acd3a12f)
2025-01-24 17:16:15 +01:00
Ivan Deng
bf0a1296a5 qualcommax: add missing WAN LED support to Spectrum SAX1V1K routers
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Fixed an issue where both WAN LEDs light up before plugging in the
ethernet cable and no blinking regardless of WAN network activity.

Updated the LED configuration to reflect proper status:
Green indicates 2.5Gb connection speed.
Yellow indicates other connection speed and traffic activity.

This resolves inconsistent WAN LED behavior on Spectrum SAX1V1K routers.

Signed-off-by: Ivan Deng <hongba@rocketmail.com>
Link: https://github.com/openwrt/openwrt/pull/17623
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 8e78bc39a38d2a82818bcae467d3bcbbbe8531f3)
2025-01-24 11:53:42 +01:00
Dim Fish
8290303ea4
mediatek: add Airoha AN8855 gigabit switch driver
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
New revisions of Xiaomi AX3000T with 1.0.84+ stock firmware contain new hardware.
This commit add support for Airoha AN8855 gigabit switch driver with 6.6 kernel patches

Based on https://patchwork.kernel.org/project/netdevbpf/cover/20241209134459.27110-1-ansuelsmth@gmail.com/

Signed-off-by: Dim Fish <dimfish@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16709
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 0fd9d00cd6fc285b2a925eb03e6350a4b00fc279)
2025-01-23 15:28:08 +01:00
Álvaro Fernández Rojas
58d0057481 generic: backport pending gpio-regmap ops patch
Some checks failed
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Has been cancelled
This patch has been accepted for linux v6.14 so we can move it from pending
to backport.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 2f2e21a52bdfdcf83868e3169768fda134aa883b)
2025-01-22 20:52:54 +01:00
Álvaro Fernández Rojas
9d9e06a30a generic: fix version number on realtek phy patches
These patches have been accepted in linux v6.14 instead of v6.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 12a07e934c013c87ea96ddda8ec18c9af0362c53)
2025-01-22 20:52:34 +01:00
Daniel Golle
a872a245a2 generic: net: phy: realtek: expose temperature sensors
Expose the temperature sensor built-into RTL822x 2.5G and 5G PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 3a189e38317e3390ba5b17523f55bd2fb1b72327)
2025-01-22 20:52:06 +01:00
Mieczyslaw Nalewaj
eff00e2fb1 generic: refresh hack patches
Refresh hack patches with make target/linux/refresh.

Fixes: 9508ca44eb57 ("kernel: backport improvement to page pool fragment handling from 6.7")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit ee730a66e9c670ec2ee37ee2b207accd539e1d15)
2025-01-22 20:51:39 +01:00
Felix Fietkau
419ef19dba kernel: backport improvement to page pool fragment handling from 6.7
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Makes it easier to keep drivers like mt76 in sync with newer versions

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 9508ca44eb577a13e795e0a6c5683689efc61475)
(cherry picked from commit 478041997f068c87c6356108cf3dc3b667666dd5)
2025-01-22 12:41:43 +01:00