The factory uboot of the Turris Omnia boots with "root=b301", and we
instruct new users to sysupgrade from there (e.g. method 1, step 7).
Currently, this will fail with "Unable to determine upgrade device".
Add a new case to export_bootdevice, which parses the hex argument.
Ref: https://github.com/openwrt/openwrt/pull/2340#issuecomment-561317688
Fixes: 2e5a0b81ec ("mvebu: sysupgrade: sdcard: keep user added partitons")
Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 3a4f587c46)
CONFIG_PINCTRL_SUN4I_A10 controls both the A10 and the A20 enablong of
the pinctrl driver, this is necessary since upstream commit
5d8d349618a9464714c07414c5888bfd9416638f ("pinctrl: sunxi: add A20
support to A10 driver") which has been included in v4.13 and onwards.
Fixes: ad2b3bf310 ("sunxi: Add support for kernel 4.14")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 32e4eaef1b)
This update fixes many bugs, and six security vulnerabilities, including
CVE-2019-18840.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit d5ede68f8b)
The mt76 driver does load the firmware for the MT7615 chip from
/lib/firmware/mediatek instead of /lib/firmware. The driver loads the
firmware from this path since mt76 commit
ea3ab68c7589 ("mt76: mt7615: fix mt7615 firmware path definitions").
Fixes: a2e2c40b5e ("mt76: update to the latest openwrt-19.07 version")
Reported-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
The TP-Link Archer C20i previously had a generic Ralink MAC address set
for both radios, as the caldata does only contain a generic MAC address.
Set the MAC address from the vendor firmware for both radios to assign
unique MAC addresses to every device.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 3b013dcdf8)
The TP-Link Archer C2 v1 previously had a generic Ralink MAC address set
for the 5GHz radio (MT7610), as the caldata does only contain a generic
MAC address.
Set the MAC address from the vendor firmware for the 5GHz radio to
assign unique MAC addresses to every device.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit dcc923a4c4)
Use the WPS LED to indicate system status like it is done for the
TP-Link Archer C2 v1 and many other boards.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit a272fafc9c)
This converts all MediaTek MT7620 boards from TP-Link to use the now
supported WiFi throughput LED trigger. This way, the LED state now
covers all VAPs regardless of their name.
Also align all single-WiFi LEDs to represent the state of the 2.4GHz
radio. This was not always the case previously, as later-added support
for the MT7610 altered the phy probing order.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 1e7c6381f0)
330e832 mt76: mt76x0: fix default mac address overwrite
f97c33e mt76: mt7603: fix input validation issues for powersave-filtered frames
875f6d7 mt76: mt7615: increase MCU command timeout
abd7d86 mt76: clear skb pointers from rx aggregation reorder buffer during cleanup
96c7b07 mt76: eeprom: add support for big endian eeprom partition
19c8e20 mt76: fix possible undetected invalid MAC address
df64c56 mt76: Off by one in mt76_calc_rx_airtime()
1702b24 mt76: mt7603: reset STA_CCA counter setting the channel
383a631 mt76: mt76x0u: do not reset radio on resume
2dcfbdd mt76: disable bh in mt76_dma_rx_poll
947d20d mt76: fix rx dma ring descriptor state on reset
f3348f5 mt7615: replace sta_state callback with sta_add/sta_remove
faf5e6f mt76: mt7615: read {tx,rx} mask from eeprom
db78ee0 mt76: move mt76_get_antenna in mt76_core module
7121e16 mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs
5dfb0ec mt76: mt7615: disable radar pattern detector during scanning
e2f90ad mt76: move interface_modes definition in mt76_core module
cfdb751 mt76: mt7615: add ibss support
e0731a8 mt76: move SUPPORTS_REORDERING_BUFFER hw property in mt76_register_device
a85c06c mt76: use mt76_dev in mt76_is_{mmio,usb}
ea19cd7 mt76: Remove set but not used variable 'idx'
3cbaf81 mt76: mt76u: rely on a dedicated stats workqueue
20f0589 mt76: mt76u: rely on usb_interface instead of usb_dev
f2be00b mt76: dma: fix buffer unmap with non-linear skbs
c14d656 mt76: mt76x2e: disable pcie_aspm by default
58e1e96 mt76: mt7615: remove unneeded semicolon
c93a2d1 mt76: mt76x02u: update ewma pkt len in mt76x02u_tx_prepare_skb
1987b74 mt76: mt76x0: remove 350ms delay in mt76x0_phy_calibrate
50b1e9b mt76: refactor cc_lock locking scheme
d868638 mt76: remove obsolete .add_buf() from struct mt76_queue_ops
dc14ac6 mt7615: remove vif sta from poll list on interface remove
2a0a191 mt7603: remove vif sta from poll list on interface remove
d3a5895 mt76: fix a-mpdu boundary detection issue for airtime reporting
391e148 mt76: add sanity check for a-mpdu rx wcid index
01642d8 mt76: mt76x02: fix use-after-free in tx status code handling airtime
c11a4ad mt76: mt76x0: eeprom: add support for MAC address from OF
d94cc81 mt76: drop rcu read lock in mt76_rx_aggr_stop
7d8764d mt76: avoid enabling interrupt if NAPI poll is still pending
5b02a07 mt76: add missing locking around ampdu action
71c2ef0 mt76: fix aggregation stop issue
6f7d0f5 mt76: fix use-after-free bug in airtime fairness code
8f22de0 mt76: do not use devm API for led classdev
e7199f9 mt76: enable airtime fairness
81f2be0 mt76: mt7615: track tx/rx airtime for airtime fairness
2579122 mt76: mt7615: introduce mt7615_mac_wtbl_update routine
d91f7c1 mt76: mt7615: fix survey channel busy time
028071d mt76: mt7615: report tx_time, bss_rx and busy time to mac80211
0e5050e mt76: mt76x02: track approximate tx airtime for airtime fairness and survey
3429cc7 mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_reset
de118bb mt76: unify channel survey update code
fdf0163 mt76: mt7603: switch to a different counter for survey busy time
ee31030 mt76: mt7603: track tx airtime for airtime fairness and survey
f34b1ae mt76: track rx airtime for airtime fairness and survey
a1d6891 mt76: store current channel survey_state in struct mt76_dev
b042987 mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4
2027763 mt76: report rx a-mpdu subframe status
1ddcadb mt76: mt7603: remove q_rx field from struct mt7603_dev
ea3ab68 mt76: mt7615: fix mt7615 firmware path definitions
081926a mt76: mt7603: collect aggregation stats
696c0fc mt76: mt7615: collect aggregation stats
23e8aed mt76: move aggr_stats array in mt76_dev
1118b5e mt76: mt7615: add queue entry in debugfs
fbc59e6 mt76: move queue debugfs entry to driver specific code
0b01ace mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb module
c394887 mt76: mt76x0u: reset counter starting the device
0355b7a mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_start
f3792b5 mt76: mt76x02: move mac_reset_counter in mt76x02_lib module
63e8152 mt76: mt7615: enable SCS by default
b140512 mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smaller
a20c20b mt76: usb: add lockdep_assert_held in __mt76u_vendor_request
0308d75 mt76: remove empty flag in mt76_txq_schedule_list
0efbc5d mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdown
9c5df3c mt76: remove aggr_work field from struct mt76_wcid
8739f87 mt76: mt7615: fix control frame rx in monitor mode
e07407a mt7603: fix build with CONFIG_KERNEL_DYNAMIC_DEBUG=y
c7f8214 mt76: mt7615: add support to read temperature from mcu
6797378 mt76: mt7615: introduce mt7615_txwi_to_txp utility routine
496c78e mt76: mt76x0: remove unneeded return value on set channel
1d2acd5 mt76: mt76x0: remove redundant chandef copy
0167bfa mt76: make mt76_rx_convert static
Signed-off-by: David Bauer <mail@david-bauer.net>
The button events "pressed" and "released" were switched. Tested with v18.06.4.
Signed-off-by: Moritz Warning <moritzwarning@web.de>
(cherry picked from commit 3e1325b219)
This adds an LED trigger for the WAN LED on top of the TP-Link
TL-WR902AC v3. Currently, only the LED on the port itself shows the link
state, while the LED on top of the device stays dark.
The WAN port of the device is a hybrid LAN/WAN one, hence why the LED at
the port was labled LAN.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit c48b571ad7)
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Christoph Krapp <achterin@googlemail.com>
(cherry picked from commit 985ec835ae)
Several devices in mt76x8 subtarget use the following line to set
up wmac in their DTS(I) files:
ralink,mtd-eeprom = <&factory 0x4>
This is strange for several reasons:
- They should use mediatek,mtd-eeprom on this SOC
- The caldata is supposed to start at 0x0
- The parent DTSI mt7628an.dtsi specifies mediatek,mtd-eeprom anyway,
starting from 0x0
- The offset coincides with the default location of the MAC address
in caldata
Based on the comment in b28e94d4bf ("ramips: MiWiFi Nano fixes"),
it looks like the author for this device wanted to actually use
mtd-mac-address instead of ralink,mtd-eeprom. A check on the same
device revealed that actually the MAC address start at offset 4 there,
so the correct caldata offset is 0x0.
Based on these findings, and the fact that the expected location on
this SOC is 0x0, we remove the "ralink,mtd-eeprom = <&factory 0x4>"
statement from all devices in ramips (being only mt7628an anyway).
Thanks to Sungbo Eo for finding and researching this.
Reported-by: Sungbo Eo <mans0n@gorani.run>
Fixes: b28e94d4bf ("ramips: MiWiFi Nano fixes")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 09d38a3bc3)
Only select ath10k-ct-regular when smallbuffers version was not
selected.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 80f06cb601)
According to many bugreports [0][1][2] the default ath10k-ct kernel
module is unusable on devices with just 64 MiB RAM or with 128 MiB and
dual ath10k cards. The target boards boot but eventually oom-killer
starts to interfere with normal operation, so the current state is
effectively broken.
Since the two patches in question have a performance impact (and
possibly some other unexpected side-effects) a dedicated build variant
is added so that users of the low RAM devices can still benefit from all
the ath10k-ct advantages.
According to testing [3] results, the issue can be experienced even with
"a 256MB device with three radios". Measured performance impact of
implementing small buffers was lowering "the maximum 5 GHz throughput on
an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for
TCP transfers (download/upload) to 438/343 Mbit/s"
The patches were apparently inspired by QSDK tweaks used by ODMs for the
affected devices.
[0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html
[1] https://github.com/openwrt/openwrt/pull/1077
[2] https://bugs.openwrt.org/index.php?do=details&task_id=2664
[3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[Remove double CONFIG_ATH10K-CT_LEDS entry]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 1ac627024d)
b4e25d5 libblkid-tiny: fix symbol collision with full libblkid
Fixes: FS#2691, FS#2692
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 5f4244150f)
4327ed4 mkdev: Avoid out of bounds read
9b3eb63 libblkid-tiny: use blkid_probe_set_utf8label for label set
c9d0462 libblkid-tiny: adds blkid_probe_set_utf8label support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 541a321070)
It contains a single change to vlist.h header file: "vlist: add more
macros for loop iteration". This is needed for newer version of fstools
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 51e7624776)
This patch resolves recursive dependency warning on a feed package:
$ make defconfig
Collecting package info: done
tmp/.config-package.in:104721:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:104721:symbol PACKAGE_nfs-kernel-server depends on NFS_KERNEL_SERVER_V4
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
feeds/packages/net/nfs-kernel-server/Config.in:4:symbol NFS_KERNEL_SERVER_V4 depends on PACKAGE_nfs-kernel-server
#
# configuration written to .config
#
19.07 branch uses kernel 4.14 only, so CONFIG_LINUX_4_9 symbol is not
needed anyway.
Ref: https://github.com/openwrt/packages/issues/10490
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
apache mirrors holds only latest releases, to download
older releases, one must use archive.apache.org to get
them.
Signed-off-by: Jiri Kastner <cz172638@gmail.com>
(cherry picked from commit dc34c695c4)
Unloading and reloading the modules fails, as platform_device_put() does not
release resources fully.
root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5
[ 196.860620] Custom GPIO-based I2C driver version 0.1.1
[ 196.871162] ------------[ cut here ]------------
[ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158
[ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0'
...
[ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory.
This patch fixes it by replacing platform_device_put() to
platform_device_unregister().
Fixes: da77408537 ("i2c-gpio-custom: minor bugfix")
Fixes: 3bc81edc70 ("package: fix w1-gpio-custom package (closes#6770)")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit a22b7a60d9)
Several CMake packages such as log4cplus and protobuf(-c) install to
lib64 instead of lib on some hosts. This completely breaks rpath linking.
Override it globally to avoid fixing each package individually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry picked from commit 383abffb11)
The USB descriptor parsing in adb fails to detect SuperSpeed devices
because of the SuperSpeed Endpoint Companion Descriptor. This
cherry-picks the upstream fix for the problem.
Unfortunately there never were a release with this fix before the
conversion to C++, so upgrading to a newer version isn't an option.
This makes adb work with SuperSpeed devices like the Sierra Wireless
EM7565. Tested and verified.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
(cherry picked from commit d034a1f457)
This backports the patch for GCC PR target/89587 (gcc's rs6000
configuration unconditionally sets MULTIARCH_DIRNAME, even when
multiarch is disabled).
This currently affects apm821xx and may cause issues when
cross-compiling packages, e.g. Python 3[1].
This includes patches for GCC 8 (with the changelog diff removed);
this change is already included in GCC 9.2 and 7.5.
[1]: https://github.com/openwrt/packages/issues/10552
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
[Removed patch for GCC 7.4.0, GCC 7.5.0 already contains this]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit c102f702e7)
This fixes gcc build error within clang 11.0, it tweaks the version
string from LLVM to clang.
Signed-off-by: Yorkie Liu <yorkiefixer@gmail.com>
(cherry picked from commit 65a561fd09)
led2l and led2h value is incorrectly set by led3l and led3h.
Bug was introduced in commit: 863e79f8d5
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Fixes: 863e79f8d5 ("lantiq: add support for kernel 4.9")
(cherry picked from commit 692390225d)
The current ethernet MAC address setup of TL-WDR4300 board is different
from the setup of stock firmware:
OpenWrt: lan = label_mac -2, wan = label_mac -2
stock: lan = label_mac, wan = label_mac +1
This patch applies to all devices using TL-WDR4300 board:
TL-WDR3600 v1
TL-WDR4300 v1
TL-WDR4300 v1 (IL)
TL-WDR4310 v1
Mercury MW4530R v1
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit 9b02d32e34)
The current ethernet MAC address setup of TL-WDR4300 board is different
from the setup of stock firmware:
OpenWrt: lan = label_mac -2, wan = label_mac -2
stock: lan = label_mac, wan = label_mac +1
The full address assignment is as follows:
LAN label
WAN label + 1
5G label
2G label - 1
This patch changes all devices using TL-WDR4300 board:
TL-WDR3600 v1 (checked on device)
TL-WDR4300 v1 (checked on device)
TL-WDR4300 v1 (IL)
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rephrase/extend commit title/message, backport]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit a4260eaab7)
Device support for Belkin F9K1109v1 was added using set_usb_led()
although this was removed in 772b27c207 ("ramips: set F5D8235 v1
usb led trigger via devicetree").
Use ucidef_set_led_usbport() instead.
Fixes: f2c83532f9 ("ramips: add support for Belkin F9K1109v1")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rephrase commit title and message, backport]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 1f455418ef)
This update doesn't include:
3b1e0a7bdfee brcmfmac: add support for SAE authentication offload
be898fed355e brcmfmac: send port authorized event for FT-802.1X
due to nl80211 dependencies.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c3aa33bf70)
TL-WDR4300 board uses only green LED names in DTSI.
This patch adds migration for them.
The actual LED colors on the devices have been reported to vary
across subrevisions (v1.x). Despite, the USB LEDs on the back might
have different color than the other LEDs on the front.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[extended commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 01d39cd18c)
Having legacy PTYs enabled causes problems with procd-hotplug.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit e964338110)
Having legacy PTYs enabled causes problems with procd-hotplug.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 2105354968)
Having legacy PTYs enabled causes problems with procd-hotplug.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 414d027ae8)
