Commit Graph

23203 Commits

Author SHA1 Message Date
Hauke Mehrtens
22d62d311a brcm47xx: run ifup before starting the switch
In addition check_module is not needed, nobody checks the return value.

SVN-Revision: 34993
2013-01-03 01:59:43 +00:00
Hauke Mehrtens
d8f1fa1e38 switch: ROBO Switch Gigabit MII Support
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD.  This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.

In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex.  I was not able to isolate the source of the problem
(this patch, driver or H/W limitation).  The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).

I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34992
2013-01-03 01:58:01 +00:00
Hauke Mehrtens
63ec34612c switch: improve error messages
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34991
2013-01-03 01:57:19 +00:00
Hauke Mehrtens
97b2b601c7 brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK).  IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34990
2013-01-03 01:56:13 +00:00
Hauke Mehrtens
f74e847301 brcm47xx: improve IRQ handling for bcma based devices
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34989
2013-01-03 01:55:34 +00:00
Hauke Mehrtens
25afeba608 brcm47xx: add a new version of the nvram rewrite patch
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
2013-01-03 01:53:30 +00:00
Hauke Mehrtens
edc7ab525f brcm47xx: move patches already in the mainline kernel to the front
SVN-Revision: 34987
2013-01-03 01:51:31 +00:00
Hauke Mehrtens
76c767f122 brcm47xx: remove support for kernel version 3.3
SVN-Revision: 34986
2013-01-03 01:48:43 +00:00
Steven Barth
965afef317 ipv6-support: Update iteration * Add support for blocking forwarding while address assignments * Fix relay restarting function
SVN-Revision: 34985
2013-01-02 23:05:44 +00:00
Steven Barth
c7d9d7c952 odhcp6c: Add support for SNTP and SIP options
SVN-Revision: 34984
2013-01-02 23:05:39 +00:00
Steven Barth
4a2e55f30f 6relayd: Announce RDNSS and DNSSL via RA
SVN-Revision: 34983
2013-01-02 23:05:35 +00:00
Jo-Philipp Wich
1683a146f4 iwinfo: replace more wext calls with nl80211 equivalents, attempt to infer nl80211 tx power from debugfs before querying wext
SVN-Revision: 34982
2013-01-02 19:10:29 +00:00
Jo-Philipp Wich
7a73c2f91f generic: add some missing kernel config symbols spotted on x86
SVN-Revision: 34981
2013-01-02 19:10:24 +00:00
Felix Fietkau
8447af36e3 ath9k: disable TX_IQ_ON_AGC_CAL on AR934x, should improve stability
SVN-Revision: 34979
2013-01-02 17:37:30 +00:00
Jo-Philipp Wich
70b0ef6322 sysupgrade: clarify online help
Fixes #12346.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 34975
2013-01-02 16:21:30 +00:00
Jo-Philipp Wich
58070b0083 sysupgrade: do not require an extra argument after --restore-backup
Neither --create-backup nor --restore-backup need an image name (following
the backup filename). Treat them in uniform way.

Mostly fixes #12346.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 34974
2013-01-02 16:21:26 +00:00
Felix Fietkau
741f6ba7ef x86: fix typo in alix2/net5501 default packages
SVN-Revision: 34972
2013-01-02 16:09:23 +00:00
Jo-Philipp Wich
54c0b40427 dnsmasq: allow dhcp host entries without mac addresses (#11928)
SVN-Revision: 34971
2013-01-02 15:14:19 +00:00
Jo-Philipp Wich
c8a8f8fd55 lldpd: various enhancements
- introduce "list interface" options to specify the ifaces to listen on, takes uci- or network device name
	- set the default system description to distrib @ hostname, e.g. "OpenWrt Barrier Breaker r34744 @ vbox"
	- introduce "option lldp_description" to override the automatically generated description

SVN-Revision: 34970
2013-01-02 14:35:43 +00:00
John Crispin
569bbe4970 rt5350 switch support fix
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
2013-01-02 11:28:21 +00:00
John Crispin
a730e96569 Remove remaining etrax references
SVN-Revision: 34968
2013-01-02 11:28:11 +00:00
John Crispin
075ea0d52e fix typo in HFS kernel module
Signed-off-by: Ian Leonard <antonlacon@gmail.com>

SVN-Revision: 34963
2013-01-02 10:29:45 +00:00
John Crispin
15e29f3d9b fixes libertas firmware install path
fixes #12712

SVN-Revision: 34961
2013-01-02 10:08:54 +00:00
John Crispin
12f36652e6 fix video modules package generation
The folder layout changed between 3.6 and 3.7

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 34960
2013-01-02 09:43:07 +00:00
Gabor Juhos
373b0b9ad1 generic: fix UBIFS build error if XZ compression is disabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34959
2013-01-02 08:53:07 +00:00
Steven Barth
7a25be66c3 6relayd: Detect changes of default routes for RAs
SVN-Revision: 34958
2013-01-01 21:41:37 +00:00
Steven Barth
def80bbecf ipv6-support: Remove unnecessary code
SVN-Revision: 34957
2013-01-01 21:41:32 +00:00
Gabor Juhos
cbc9dfc56a package/kernel: select crypto-sha256 for cifs on 3.7+
Based on a patch from #12711

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34956
2013-01-01 19:04:20 +00:00
Gabor Juhos
ab4ea8ad16 package/kernel: create separate package for the sha256 crypto module
Based on a patch from #12711

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34955
2013-01-01 19:04:17 +00:00
Gabor Juhos
d91117459c adm5120: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34954
2013-01-01 13:15:49 +00:00
Gabor Juhos
f0520f1714 adm5120: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34953
2013-01-01 13:15:44 +00:00
Gabor Juhos
b4315df8e1 adm5120: switch to 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34952
2013-01-01 13:15:41 +00:00
Gabor Juhos
edd36342e5 adm5120: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34951
2013-01-01 13:15:36 +00:00
Gabor Juhos
92cd48e9ea adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c
Also add a compatibility patch for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34950
2013-01-01 13:15:30 +00:00
Gabor Juhos
03e09078dc adm5120: use mtd_read helper in trxsplit.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34949
2013-01-01 13:15:20 +00:00
Gabor Juhos
e1b13e15b2 adm5120: don't include asm/system.h in adm5120-hcd.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34948
2013-01-01 13:15:16 +00:00
Gabor Juhos
cbe5d664e1 generic: add missing symbol for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34947
2013-01-01 13:15:11 +00:00
Gabor Juhos
e1965a1d1a ar71xx: register the NAND flash controller device on the AP135/136 boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34946
2013-01-01 13:10:41 +00:00
Gabor Juhos
66efec6783 ar71xx: allow to register the NAND flash controller on the QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34945
2013-01-01 13:10:36 +00:00
Gabor Juhos
2c77e5d7b3 ar71xxx: allow to select ATH79_DEV_NFC for QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34944
2013-01-01 13:10:34 +00:00
Gabor Juhos
d8446d65fe ar71xxx: allow to build the ar934x_nfc driver for QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34943
2013-01-01 13:10:29 +00:00
Gabor Juhos
93c322cacc ar71xx: fix NAND controller base for QCA955x SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34942
2013-01-01 13:10:26 +00:00
Gabor Juhos
b57cc9a538 ar71xx: fold AP135 patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34941
2013-01-01 13:10:22 +00:00
Steven Barth
4c09d5dde3 ipv6-support: Fix typo in dhcpv6-script * thanks to KarlHegbloom for reporting
SVN-Revision: 34940
2012-12-31 09:38:59 +00:00
John Crispin
624eb36fff adds missing symbol
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
Hauke Mehrtens
1d50d60fc0 rtc-rv5c386a: fix compilation for kernel >= 3.4
SVN-Revision: 34938
2012-12-30 15:32:53 +00:00
Hauke Mehrtens
190c566210 acx-mac80211: fix compilation
Some header files from mac80211 are now moved to the uapi dir.

SVN-Revision: 34937
2012-12-30 15:28:28 +00:00
Felix Fietkau
fc760260dd uci: disable parallel builds again, the lua<->libuci dependency is not safe
SVN-Revision: 34936
2012-12-30 14:58:37 +00:00
John Crispin
ce57efa3ea fixes usb port on arv 4518
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
Gabor Juhos
fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
2012-12-30 08:23:48 +00:00