4 Commits

Author	SHA1	Message	Date
Tobias Welz	d40ce8b32d	ramips: correct WizFi630S pin mappings ... WizFi630S had some pins changed in the release version of the board. The run led, wps button and a slide switch where affected. This patch is correcting this. i2c is removed as it is sharing a pin with the run (system) led. uart2 is enabled as it is also enabled in the OEM firmware. Signed-off-by: Tobias Welz <tw@wiznet.eu> (backported from commit d0b229f553) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>	2020-08-08 16:36:32 +02:00
Tobias Welz	4212b6a01e	ramips: remove doublet entry in WizFi630S dts file ... &wmac entry in WIZnet WizFi630S dts file was existing two times. This is removing one of them. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit b735bbcb18)	2020-08-08 16:36:15 +02:00
Tobias Welz	a81c459d99	ramips: disable unused phy ports of WizFi630S ... WIZnet WizFi630S is using only 3 of the phy ports. The unused phy ports draw unnecessarily power. This is disabling the unused phy ports. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit 36d4c2272e)	2020-08-08 16:36:08 +02:00
Tobias Welz	7c4b85ee27	ramips: add support for WIZnet WizFi630S board ... The WIZnet WizFi630S board is in the miniPCIe form factor. SoC: Mediatek MT7688AN RAM: 128MB Flash: 32Mb WiFi: 2.4GHz Ethernet: 3x 100Mbit USB: 1 (USB 2.0) serial ports: 2 (1x full, 1xlite) Flash and recovery instructions: Use the factory installed u-boot boot loader. It is available on UART2 (115200,8,n,1). Then get the sysupgrade image from a tftp server. Signed-off-by: Tobias Welz <tw@wiznet.eu> [whitespace and device name in makefile fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>	2019-03-29 07:33:59 +00:00