Commit Graph

62503 Commits

Author SHA1 Message Date
Hauke Mehrtens
2758e1b21c gdb: Remove MIPS NSIG patch
This bug was fixed in the libc:
https://sourceware.org/bugzilla/show_bug.cgi?id=14523
https://git.busybox.net/uClibc/commit/?id=2da958760f798224065508431787e3a83b7fe2ae
https://git.musl-libc.org/cgit/musl/commit/?id=7c440977db9444d7e6b1c3dcb1fdf4ee49ca4158

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 21:51:25 +02:00
Hauke Mehrtens
c71e53bf9d gdb: Remove upstreamed SIGINT patch
The problem was fixed upstream, see:
https://sourceware.org/bugzilla/show_bug.cgi?id=18945
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4c35c4c6a779c79e456b7a5311f74aafc9026bd5

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 21:51:25 +02:00
Hauke Mehrtens
654983ea11 gdb: Update to version 15.2
See news file for changes:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=gdb/NEWS;hb=gdb-15.1-release

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 21:51:24 +02:00
Hauke Mehrtens
1cd7708eb3 toolchain: gdb: Update to version 15.2
See news file for changes:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=gdb/NEWS;hb=gdb-15.1-release

This requires a C++17 compiler compatible compiler.

Link: https://github.com/openwrt/openwrt/pull/16665
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 21:51:01 +02:00
Aleksander Jan Bajkowski
622be8e3d9 lantiq: ase: disable adm6996 and swconfig
The ase subtarget supports two devices. ALLNET ALL0333CJ has one
Ethernet port and uses only the built-in MAC and PHY. The second
device is the Netgear DGN1000, which uses an AR8216 switch.

The driver for the adm6996 switch was probably accidentally
enabled instead of the ar8216 in commit that restores ase support
9b321bc60d ("lantiq: add Amazon-SE subtarget").

Before removing the ase subtarget, only ar8216 was enabled
c821836395 ("lantiq: remove unmaintained code").

Reduce uncompressed kernel size by 15.6 kB.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/15332
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 21:38:26 +02:00
Aleksander Jan Bajkowski
bb71abb689 lantiq: ase: refresh config
This was done by executing these command:
$ make kernel_oldconfig CONFIG_TARGET=subtarget

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/15332
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 21:38:26 +02:00
Shiji Yang
eb05baff7f ppp: clean up makefile
The latest ppp version seems to no longer require these ancient
build fixes.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 15:53:06 +02:00
Shiji Yang
7eb6bf1ac9 ppp: remove discovery phase timeout hack patch
In the original code, the entire time delay of the discovery phase
is only 5+5x2+5x2x2 = 35s. Increasing timeout may be necessary if
discovery phase fails on first attempt. There is a chance to fix
the "Timeout waiting for PADO packets" issue by removing this patch.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 15:53:06 +02:00
Shiji Yang
8766a92766 ppp: remove uClibc wtmp hack patch
The uClibc library support was removed since commit:
57fe7d5401 ("toolchain: remove uClibc install stuff")

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 15:53:06 +02:00
Shiji Yang
3e668c6d02 ppp: update to 2.5.1
ChangeLog:
https://github.com/ppp-project/ppp/blob/ppp-2.5.1/ChangeLog

Suppressed patches:
010-use_target_for_configure.patch [1]
510-pptp_compile_fix.patch [2]
520-u_int_bsd_fix.patch [3]

Upstreamed patches:
330-retain_foreign_default_routes.patch [4]
521-remove_unused_openssl_dep.patch [5]

[1] e48a9b5de4
[2] Merged into "500-add-pptp-plugin.patch"
[3] 797cdae57c
[4] 9856f47063
[5] 59342ab622

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 15:53:06 +02:00
Sergey Ivanov
9cecf2b16e ppp: update to 2.5.0
ChangeLog:
https://github.com/ppp-project/ppp/blob/ppp-2.5.0/ChangeLog

Upstreamed patches:
120-debian_ipv6_updown_option.patch [1]
133-fix_sha1_include.patch [2]
140-pppd-Fix-compilation-with-older-glibc-or-kernel-head.patch [3]
141-Expand-byte-count-statistics-to-64-bits-298.patch [4]
142-pppd-Add-support-for-registering-ppp-interface-via-L.patch [5]
143-pppd-Workaround-for-generating-ppp-unit-id-on-Linux-.patch [6]
144-pppd-Retry-registering-interface-when-on-rtnetlink-E.patch [7]

Suppressed patches:
200-makefile.patch [8]
201-mppe_mppc_1.1.patch [9]
203-opt_flags.patch [10]
300-filter-pcap-includes-lib.patch [11]
511-pptp_cflags.patch [12]
600-Revert-pppd-Use-openssl-for-the-DES-instead-of-the-l.patch [13]
610-pppd_compile_fix.patch [14]

[1] 7f8c1a1f8e
[2] ba7f7e053d
[3] 98ec18f098
[4] 81ad945630
[5] 4a54e34cf5
[6] 44609bfc97
[7] 089687fbcc
[8] enable_eaptls=no, with_pcap=no, HAVE_CRYPT_H=1 in configure
[9] enable_microsoft_extensions=yes, MPPC support is removed.
[10] fPIC ignored so far
[11] done by autotools
[12] in main patch for pptp plugin
[13] with_openssl=no, already in upstream ppp-des.c
[14] with_static_pcap=yes from patch 310

Signed-off-by: Sergey Ivanov <icegood1980@gmail.com>

* Fix package hash.
* Fix multilink variant build.
* Fix some compile errors.
* Some code format fixes.
* Refactor commit message.
* Rebase git and fix conflicts.

Co-authored-by: Shiji Yang <yangshiji66@qq.com>
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16605
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-12 15:53:06 +02:00
Petr Štetiar
2cea050024
openwrt-keyring: add apk public key for signing of package indexes
apk/openwrt-snapshots.pem contains Elliptic Curve based public key which
is going to be used for signing of apk's package.adb package indexes
after the builds using `apk adbsign --sign-key <key> packages.adb`
command on the buildbot.

References: https://github.com/openwrt/buildbot/pull/46
Link: https://github.com/openwrt/openwrt/pull/16539
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-10-12 08:58:59 +00:00
Markus Stockhausen
3d7040b7d6 realtek: scripts: fix error in belkin-header
For some reason the new belkin-header.py script works without issues
in a local Fedora build environment. In the OpenWrt build pipeline it
produces the following errors:

Traceback (most recent call last):
  File "/builder/shared-workdir/build/scripts/belkin-header.py", line 92, in <module>
    head = create_header(buf, args.belkin_header, args.belkin_model)
  File "/builder/shared-workdir/build/scripts/belkin-header.py", line 68, in create_header
    head[28:29] = VERSION1.to_bytes(1)
TypeError: to_bytes() missing required argument 'byteorder' (pos 2)

This may be related due to different python version. Fix this by
handing over the needed parameters

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16667
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-11 23:37:09 +02:00
Felix Fietkau
6c35333316 mt76: update to Git HEAD (2024-10-11.1)
ecca0e77b4bc wifi: mt76: mt7915: fix omac index assignment after hardware reset

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-11 20:03:42 +02:00
John Audia
16bf650d50 kernel: bump 6.6 to 6.6.56
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.56

No patches needed a rebase

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16655
Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-10-11 19:21:41 +02:00
John Audia
12f12df569 kernel: bump 6.6 to 6.6.55
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.55

Added the following default ksym to target/linux/generic/config-6.6:
	CONFIG_PROC_MEM_ALWAYS_FORCE=y
	# CONFIG_PROC_MEM_FORCE_PTRACE is not set
	# CONFIG_PROC_MEM_NO_FORCE is not set

Removed upstreamed:
	generic/backport-6.6/780-23-v6.12-r8169-Fix-spelling-mistake-tx_underun-tx_underrun.patch[1]
	generic/backport-6.6/780-25-v6.12-r8169-add-tally-counter-fields-added-with-RTL8125.patch[2]
	generic/pending-6.6/684-gso-fix-gso-fraglist-segmentation-after-pull-from-fr.patch[3]
	lantiq/patches-6.6/0025-v6.12-net-ethernet-lantiq_etop-fix-memory-disclosure.patch[4]

Manually rebased:
	bcm27xx/patches-6.6/950-0086-Main-bcm2708-bcm2709-linux-port.patch
	bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=f02fcb7283b1c25f7e3ae07d7a2c830e06eb1a62
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=1c723d785adb711496bc64c24240f952f4faaabf
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=af3122f5fdc0d00581d6e598a668df6bf54c9daa
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=e66e38d07b31e177ca430758ed97fbc79f27d966

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16655
Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-10-11 19:21:41 +02:00
Felix Fietkau
6b7d549dd0 mt76: update to Git HEAD (2024-10-11)
513bd7683746 Revert "wifi: mt76: mt7915: disable the second PCIe link for MT7915"
703c6b78c133 wifi: mt76: mt7915: firmware restart on devices with a second pcie link

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-11 18:50:47 +02:00
Christian Marangi
f9a70a20c5
generic: backport BLOCK OF support patch
Backport BLOCK OF support patch merged upstream and refresh pending
BLOCK patches.

This is a new way to declare partition table for BLOCK device (eMMC
currently supported) with the use of DTS.

Current pending patch are adapted to not cause regression with current
downstream implementation of a similar functionality.

Also enable the new OF_PARTITION config by default.

Link: https://github.com/openwrt/openwrt/pull/16663
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-10-11 17:18:40 +02:00
Shiji Yang
48b8c602d0 ipq40xx: switch to zImage kernel for SKSpruce WIA3300-20
The bootloader can support zImage linux kernel which can decrease
the firmware image size.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16662
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-11 16:32:57 +02:00
Felix Fietkau
7e942c53b2 netifd: update to Git HEAD (2024-10-06)
3c6265fdbd02 wireless: reload wireless device if any vif network bridge changes ifindex

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-11 14:40:09 +02:00
Tianling Shen
e00b6ba0c8 uboot-rockchip: Update to 2024.10
Removed upstreamed patches.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/16647
Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-10-11 00:11:59 +02:00
Thomas Richard
51e083426b scripts/feeds: force kernel package scan after a target installation
When a target is installed from a feed, the linux kernel package is scanned
before the installation of this target.
If some kernel module packages are defined in this feeds at the target
level, there were not parsed during the scan of linux kernel package, as
the target didn't exist yet. So these kernel module packages don't exist.

Once the target is installed, clean the linux kernel packageinfo to force
the scan of the linux kernel package next time this script (or the make
command) is called.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.117548.1727195440.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-10 21:51:43 +02:00
Robert Marko
9b66c7dfa5 realtek: refresh patches
CI is saying that patches need to be refreshed, so refresh them.

Link: https://github.com/openwrt/openwrt/pull/16653
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-10 12:35:33 +02:00
Felix Fietkau
3f6e087b6f mt76: update to Git HEAD (2024-10-10)
86b41a32a5ac wifi: mac80211: don't use rate mask for offchannel TX either
82a452919f52 wifi: mac80211: handle ieee80211_radar_detected() for MLO
02c07fe539b4 wifi: mt76: mt7996: fix rx filter setting for bfee functionality
a902bfa6db2f wifi: mt76: mt7915: disable the second PCIe link for MT7915
a7d48cd3ed34 wifi: mt76: mt7915: reduce the number of command retries
0d8474602a9b wifi: mt76: mt7915: decrease timeout for commonly issued MCU commands
5f6051569639 wifi: mt76: mt7915: add module param to select 5 GHz or 6 GHz on MT7916
f5bccb122305 wifi: mt76: mt7996: fix invalid interface combinations
6a1199463fc8 wifi: mt76: mt7915: Fix an error handling path in mt7915_add_interface()

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-10 10:53:03 +02:00
Rosen Penev
f8ca351936 mpc85xx: handle MSM460 wifi mac in dts
Userspace handling is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-10-10 04:41:04 +02:00
Robert Marko
c3251f5d52
kernel: netdevices: add RmNet MAP support
RmNet driver provides a transport agnostic MAP (multiplexing and
aggregation protocol) support in embedded module. Module provides
virtual network devices which can be attached to any IP-mode
physical device.

This is commonly used on Qualcomm based modems for data aggregation.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2024-10-09 21:21:57 +02:00
Felix Fietkau
fa6bd065dd kernel: backport upstream commit that allows leaving out .ndo_get_stats64
Fixes mac80211 backport device statistics.

Fixes: #16642
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-09 10:44:44 +02:00
Daniel Golle
5281033831 generic: net: phy: use all SerDes MAC interface modes
Instead of forcing 2.5G PHYs into rate-adapter mode which results higher
energy consumption, lack of support for half-duplex modes and typically
worse performance when linked at speeds less than 2.5G, use SGMII mode
which allows the MAC to follow the PHY speed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-09 02:38:25 +01:00
Daniel Golle
69906789e0 generic: net: phy: realtek: various improvements
Follow the advise of Russell King allows to greatly improve the driver
for RealTek's 1G and 2.5G Ethernet PHYs. The results are full/half
duplex as well as Gbit master/slave property being read from PHY
Specific Status Register (PHYSR), and fixes regarding link-partner
advertisement.

Fixes: #14504
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-09 02:36:22 +01:00
Daniel Golle
7d256aff7b mediatek: update MediaTek PHY patchset
The previous iteration of MediaTek's PHY patches caused various weird bugs.
Drop culprit patch 733-10-net-phy-mediatek-Extend-1G-TX-RX-link-pulse-time.patch
and use the most recent iteration of the patchset which has been posted to the
netdev mailing list.

Link: https://patchwork.kernel.org/project/netdevbpf/list/?series=895513&state=*
Fixes: #16448
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-09 01:37:02 +01:00
Thomas Richard
a544b9252b toplevel.mk: add target feeds in 'make distclean'
When 'make distclean' is called, remove the target feeds.
Otherwise the directory target/linux/feeds/ (with broken symlinks) still
exists after a distclean.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.115093.1726741692.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-08 22:50:50 +02:00
Thomas Richard
2760b7c8ec gpio-button-hotplug: skip disabled buttons
Ignore buttons which are disabled in the devicetree.

Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.117522.1727194512.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-08 22:32:43 +02:00
Rosen Penev
15f5c7e365 ubnt-ledbar: fix compilation error
Wrong variable name from copy/paste.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16640
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 22:24:54 +02:00
Hauke Mehrtens
0b792954ff valgrind: Remove unsupported configure options.
These options are not recognized by the valgrind configure script,
remove them.

Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-08 22:23:11 +02:00
Hauke Mehrtens
ffa4be4c14 valgrind: Fix build on ARMv7
The valgrind configure script checks if host_cpu is set to armv7 or arm.
By default --host is set to arm-openwrt-linux and the host_cpu variable
is set to arm. Then the valgrind build tries to compile valgrind for
armv6 and fails. Set it explicitly to armv7 to compile valgrind with
armv7 support.

Fixes: 1a55d90320 ("valgrind: Update to version 3.23")
Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-08 22:23:11 +02:00
Rosen Penev
084665698b ath79: gpio-rb91x-key: use devm for mutex_init
mutex_destroy is not called in any error paths or in _remove. Just use
devm to do so.

Removed a pointless platform_set_devdata call. Not needed with all of
the devm conversions.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16630
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 19:35:56 +02:00
Rosen Penev
a35bfa68d3 ath79: gpio-rb4xx: use devm_mutex_init
Also use devm for gpiochip_add_data.

Allows completely removing the _remove function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16622
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 19:34:38 +02:00
Shiji Yang
b37f3def86 ipq40xx: add support for SKSpruce WIA3300-20
Specification
-------------
- SoC       : Qualcomm IPQ4019
- RAM       : 256 MiB DDR3 (NT5CC128M16JR-EK)
- Flash     : 64 MiB SPI NOR (Winbond W25Q512JVFQ)
- WLAN      : IPQ4019 built-in
  - 2.4 GHz : 2x2 MIMO WiFi4
  - 5 GHz   : 2x2 MIMO WiFi5
- Ethernet  : QCA8075 10/100/1000 Mbps 1x WAN (ETH1, PoE); 1x LAN (ETH2)
- USB       : 1x 2.0 Type-A
- UART      : 3.3V, 115200n8
- Buttons   : 1x Reset
- LEDs      : 1x RUN (lime & red)
              1x WiFi 2.4 GHz (lime)
              1x WiFi 5 GHz (lime)
              2x ETH (lime), controlled by the QCA8075 phy
- Power     : DC 12V & 802.3at PoE
- FCC ID    : 2AHKT-WIA3300-20
- TFTP IP   :
  - client  : 192.168.18.254
  - router  : 192.168.18.1

Installation
------------
1. Open uart console and start TFTP server. Copy initramfs image to
   the TFTP root directory and rename it to 'ipqinitramfs.bin'.
2. Power on and press 'Enter' to exit to the u-boot console according
   to the TTL log prompt.
3. Execute commands to load the initramfs image:
   tftpboot && bootm
4. Enter into OpenWrt to backup the partitions if you want to restore
   the stock firmware one day.
5. Override default 'bootcmd' environment variable in u-boot console:
   env set bootcmd 'sf probe && sf read $loadaddr 0x980000 0x800000 && bootm $loadaddr'
   env save
6. Repeat step 3 and flash 'sysupgrade' image in OpenWrt.

Recovery and return to stock
----------------------------
1. Restore the backup firmware partitions in the installation step 4.
2. Restore `bootcmd` environment variable via commands:
   env set bootcmd bootipq && env save

MAC addresses
-------------
+---------+-------------------+
|         | MAC example       |
+---------+-------------------+
| LABEL   | xx:xx:xx:xx:xx:25 |
| LAN     | xx:xx:xx:xx:xx:26 |
| WAN     | xx:xx:xx:xx:xx:25 |
| WLAN 2g | xx:xx:xx:xx:xx:28 |
| WLAN 5g | xx:xx:xx:xx:xx:29 |
+---------+-------------------+

Notice
-----------
1. Some CH340 USB-TTL module doesn't work on this device.
2. The 'firmware' partition consists of four parts in the vendor
   layout:
     * Name            Start           Size
     * rootfs          0x980000        0x1680000
     * 0:HLOS1         0x2000000       0x800000
     * rootfs_1        0x2800000       0x1400000
     * rootfs_data     0x3c00000       0x350000
3. User can control the USB power supply via commands:
   echo enabled > /sys/devices/platform/output-usb-power/state
   echo disabled > /sys/devices/platform/output-usb-power/state

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 19:33:33 +02:00
Shiji Yang
a48ba7efcc ipq40xx: generic: enable userspace regulator consumer driver
It can be used to control the power on/off status for the fixed
voltage regulator via sysfs.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 19:33:33 +02:00
Shiji Yang
823fd1b166 ipq-wifi: update to latest version 2024-10-08
dcbab62 ipq40xx: add BDFs for SKSpruce WIA3300-20

A new board file package "ipq-wifi-skspruce_wia3300-20" will be
added for the incoming device SKSpruce WIA3300-20.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 19:33:33 +02:00
Rosen Penev
3483f63c56 kernel: ubnt-ledbar: use devm_mutex_init
Allows remove the _remove function as devm calls mutex_destroy
automatically.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16615
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 19:21:43 +02:00
John Thomson
7d33aedd10 generic: platform/mikrotik: add wlan lz77 decompress
A number of new (or with recently updated caldata)
Mikrotik devices are using LZ77 magic for wlan tag hard_config data.
New devices include the Chateau LTE12 [1], and ax devices [2]
Newly factory flashed devices may include the hap ac3 [3]

This can be seen in decoded OEM supout [4] dmesg:
"radio data lz77 decompressed from"…

Investigating an arm RouterOS flash.ko module, and supplied example
hard_config dumps, the format was guessed via decompilation and live
debugging [5]. This decoder was then built from the guessed format
specification.

debug prints can be enabled in a DYNAMIC_DEBUG kernel build via the
kernel cmdline:

        chosen {
-               bootargs = "console=ttyS0,115200";
+               bootargs = "console=ttyS0,115200 dyndbg=\"file drivers/platform/mikrotik/* +p\"";
        };

[1]: https://forum.openwrt.org/t/no-wireless-mikrotik-rbd53ig-5hacd2hnd/157763/4
[2]: https://forum.openwrt.org/t/mikrotik-routeros-v7-x-and-openwrt-sysupgrade/148072/17
[3]: https://forum.openwrt.org/t/adding-support-for-mikrotik-hap-ax2/133715/47
[4]: https://github.com/farseeker/go-mikrotik-rif
[5]: https://github.com/john-tho/routeros-wlan-lz77-decode

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Link: https://github.com/openwrt/openwrt/pull/15774
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-08 10:45:58 +02:00
Hauke Mehrtens
170ecbecfc linux-firmware: Update Intel AX101/AX210 firmware
Use most recent version of the Intel AX101 and AX210 firmware provided
by linux-firmware and supported the driver used in OpenWrt.

Link: https://github.com/openwrt/openwrt/pull/16621
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-07 22:33:10 +02:00
Rosen Penev
78d1689757 ath79: ar7200 usb phy: simplify probe
Even though optional is used, there's are still pointless NULL
assignments.

Use dev_err_probe to avoid manually handling EPROBE_DEFER.

Use devm_platform_iomap_resource. No struct resource needed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Shiji Yang <yangshiji66@qq.com> on NETGEAR R6100.
Link: https://github.com/openwrt/openwrt/pull/16519
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-07 22:21:08 +02:00
Lech Perczak
06791742a0 ipq40xx: fix MAC address on Meraki MR33 and MR74 after nvmem-layout
...conversion.
Commit 20736013e9 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
has causedt he device to no longer correctly read MAC address from its
onboard 24c64 EEPROM, because "at24" driver doesn't support legacy
nvmem-cell bindings [1] - and there was an explicit config option added
to mandate that behaviour in the following patch:

820-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch

But some of the devices, MR33 and MR74 included, weren't converted with
that as well.
Convert the definition to use proper fixed-layout binding to fix it.

The offending change was introduced between v23.05.0 and v23.05.1, and
found by bisection:
git bisect start
# status: waiting for both good and bad commits
# good: [bd4f415efa] OpenWrt v23.05.0: adjust config defaults
git bisect good bd4f415efa
# status: waiting for bad commit, 1 good commit known
# bad: [a58a86693f] OpenWrt v23.05.1: adjust config defaults
git bisect bad a58a86693f
# good: [3d0a78add2] qualcommax: only build initramfs if CONFIG_TARGET_ROOTFS_INITRAMFS is set
git bisect good 3d0a78add2
# bad: [21e5db97c4] build: add CycloneDX SBOM JSON support
git bisect bad 21e5db97c4
# good: [89184b15cf] mediatek: add build for MT7981 RFB
git bisect good 89184b15cf
# bad: [41f27bbb6d] bcm53xx: add the latest fix version of brcm_nvram
git bisect bad 41f27bbb6d
# good: [b649b0bf71] kernel: nvmem: fix "fixed-layout" & support "mac-base"
git bisect good b649b0bf71
# bad: [20736013e9] kernel: backport nvmem v6.6 fixes and v6.7 changes
git bisect bad 20736013e9
# good: [066971615f] kernel: backport v6.6 nvmem changes
git bisect good 066971615f
# first bad commit: [20736013e9] kernel: backport nvmem v6.6 fixes and v6.7 changes

Link: [1] https://github.com/openwrt/openwrt/issues/15393#issuecomment-2212300849
Fixes: 20736013e9 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
Fixes: https://github.com/openwrt/openwrt/issues/15393
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16623
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-07 20:12:25 +02:00
Rosen Penev
d51353db26 ath79: gpio-latch-mikrotik: use devm_mutex_init
Avoids needing to call mutex_destroy in error paths, which is missing
anyway.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16620
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-07 15:15:27 +02:00
Janusz Dziedzic
73d3789e67 mac80211: ath12k: allow country set for WCN7850
Update channels when country set.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16613
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-07 12:47:58 +02:00
Daniel Golle
dae6a871de base-files: don't wipe LED state when adding a single LED
Only replace LED state of a single LED instead of removing the entire
/var/run/led.state file.

Fixes: 511e8f84d0 ("base-files: configure LED when added")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-07 01:41:32 +01:00
Robert Marko
0b05cc7048 tools: libdeflate: bump to 1.22
Bump to the latest 1.22 version which allows dropping our only patch.

Changelog:
Version 1.22
* The CMake-based build system now implements a workaround for gcc being paired
  with a too-old binutils version.  This can prevent build errors.

Version 1.21
* Fixed build error on x86 with gcc 8.1 and gcc 8.2.

* Fixed build error on x86 when gcc 11 is paired with a binutils version that
  doesn't support AVX-VNNI, e.g. as it is on RHEL 9.

* Fixed build error on arm64 with gcc 6.

* Fixed build error on arm64 with gcc 13.1 and later with some -mcpu options.

* Enabled detection of dotprod support in Windows ARM64 builds.

Link: https://github.com/openwrt/openwrt/pull/16617
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-06 23:20:59 +02:00
Robert Marko
cc29e90d0c ath10k-ct: select mac80211 debugfs support
Trying to compile ath10k-ct without mac80211 debugfs support will result in:
openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/ath10k-ct-regular/ath10k-ct-2024.07.30~ac71b14d/ath10k-6.10/wmi.h:8083:2: error: #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware. [-Werror=cpp]
 8083 | #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware.
      |  ^~~~~~~
cc1: all warnings being treated as errors

So, since the driver itself is saying that debugfs is required, then
lets make ath10k-ct select mac80211 debugfs support which is selected
by default anyway.

Fixes: #16302
Link: https://github.com/openwrt/openwrt/pull/16619
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-10-06 23:19:38 +02:00