Currently, of_get_ethdev_address() return is checked for any return error
code which means that trying to get the MAC from NVMEM cells that is backed
by MTD will fail if it was not probed before ag71xx.
So, lets check the return error code for EPROBE_DEFER and defer the ag71xx
probe in that case until the underlying NVMEM device is live.
Link: https://github.com/openwrt/openwrt/pull/15752
Signed-off-by: Robert Marko <robimarko@gmail.com>
Since the introduction of out-of-band tagging, writing the outbound tag
had been completely broken: First, in place of a port mask containing
the port number, just the port number itself was set in the register
value. Just after that, the full port mask 0x3e (all 5 external ports)
was set unconditionally.
This remained unnoticed because the switch would then use the FDB to
decide where to send unicast packets; broadcast and multicast packets
were however sent to every port.
Fix the port tag computation and only use the full port mask as a
fallback for non-DSA mode, as it was done in the older driver patches
used on Linux 5.15.
Fixes: cd9c721124 ("ipq40xx: 6.1: use latest DSA and ethernet patches")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Robert Marko <robimarko@gmail.com>
In my previous attempt to solve the PCI problems for the lantiq targets,
I did not pay attention to the fact that the original accesses to the
GPIO took place in RAW mode. As a result, the polarity defined in the
device trees (apart from the initial value) was irrelevant.
In addition, the expected name of the GPIO in the dts has changed due to
the upstream change and therefore no RESET is currently performed.
As discussed in [1] on the linux-mips mailing list, we will now adapt
the dts files accordingly instead of patching the driver:
- dts property will be renamed to "reset-gpios"
- Polarity is set to "GPIO_ACTIVE_LOW".
I have verified this with a TP-Link TD-W8980. The PCI device is now
recognized by the system.
[1] https://patchwork.kernel.org/project/linux-mips/patch/20240607090400.1816612-1-ms@dev.tdt.de/
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> # Tested on AVM 7330 (ar9)
Link: https://github.com/openwrt/openwrt/pull/15731
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport upstream patch for tim->virtual_map flex array warning for
invalid write.
This has been notice with the bump of ath10k-ct to version 6.7.
Link: https://github.com/openwrt/openwrt/pull/15760
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
At some point RPi LEDs were renamed from led0/led1 to PWR/ACT.
This patch fixes this and also automatically detects the status_led without
relying on board_name.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Handling default packages selection is really problematic and error
prone. In all the changes, the SECCOMP config is enabled by default if
supported by the target.
This is problematic for the scenario of the first .config creation where
this option will be enabled by default but the package default are
already being parsed.
This cause the reparsing of the default package on the next command and
the "outdated config" error. To better handle this special case, add
additiona logic to match the dependency in the config and check if
CONFIG_SECCOMP should be enabled by default in the scenario where a
.config needs to be init and doesn't exist.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fix broken link generation for KERNEL projects.
Using $1 in projectsmirrors sub was still referencing the caller $1
instead of the remaining args of projectsmirrors sub.
Use shift and put the second arg of projectsmirrors sub in $append to
correctly handle the sub args.
Fixes: 465cf35888 ("scripts/download.pl: detach mirror URLs from script file")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Old "interface" sections for bridges were mixing layer 2 and layer 3.
That syntax got deprecated and UCI section "device" is used for bridge
configuration now.
Backward compatibility may be dropped from netifd soon now so migrate
old configs using uci-defaults script.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Currently, trying to upgrade on a MikroTik NAND device will force you to
use sysupgrade -n due to:
upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n).
upgrade: NAND images switched to yafut. If running older image, reinstall from initramfs.
So instead of having users manually set the new compat version lets do
what other targets do and set it for all NAND devices after good boot.
Link: https://github.com/openwrt/openwrt/pull/15754
Signed-off-by: Robert Marko <robimarko@gmail.com>
As a side-effect to adding a gnulib module for posix_fallocate(),
there are changes to the input file for fcntl.h which
are not handled here since autoreconf is not ran.
Skip updating the fcntl.h header from gnulib
and use the version shipped with the release.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
In order for linking the static libraries from elfutils to work,
other libraries need to be included to handle the references
to functions made in the library's objects that are not included
as they would already be if the library was a shared object instead.
A shared object library stores this list of libraries when it was made,
so that the dynamic linker can refer to that list at runtime,
but a static library has no such functionality so the list of libraries
for missing functions must be included at link time.
This information was already added to the pc file for libelf
using the definitions in src/Makefile.am,
so extend this to the rest of the pc files in the project.
For situations where the libraries may be used
without pkg-config setting the flags and library list,
this patch and the pc files can serve as a quick reference.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Clang has support for weak aliases
despite no support for strong aliases,
but it only works with the #pragma directive.
Implementing weak aliases instead of none
is likely a more upstream-friendly solution
for supporting building on other platforms.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
The addition of LT_INIT as well as the adjustment of
the BUILD_STATIC and addition of the BUILD_SHARED conditionals
and their usage to block building of shared objects
and adjust the variables for building static libraries
is potentially upstream-friendly.
The use of a manifest file to keep a list
of the objects in each library instead of calling ar
is also potentially upstream-friendly.
Separate these changes from the macOS-specific hacks.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a potentially upstream-friendly conditional
using the libtool configure variable "enable_shared"
in order to block building and installing of shared objects
and adjust the build of static libraries
instead of directly patching lines in or out.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
The use of ar to list the archive members in a library
in order to include them in another library is not portable.
On BSD and macOS, ar will also list
the special archive member "__.SYMDEF"
which is not a compiled object, rather it is
part of the metadata prepended to the library by ranlib.
Fix this by writing the list of unique objects used
to create the library into a separate "manifest" file
when the library is created, which will be read later
when the Makefiles of other subdirectories are ran.
Extend this to all other libraries whether or not they are linked
to another library for a shared object that is installed
so that it is possible for any of the libraries
to be statically built with more objects.
The use of the wildcard function to ignore the
special archive members which are only metadata
is no longer needed to prevent build errors.
Not using the wildcard function is preferred,
since errors should be caught during the build
instead of when linking something else or at runtime.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Importing gnulib in order to have a local portable library
to link against for missing functions currently requires
using libtool to produce the libgnu.la library.
Ideally, linking would be simple if the rest of the libraries
built by elfutils were also built using libtool, as linking
them together would not require any manipulations of library paths.
However, upstream elfutils does not support building the libraries
statically with libtool, so using libtool comes at the cost
of creating a huge patch to introduce that functionality.
For building on macOS, it turns out that libgnu.la is only needed
for building the binaries, and that just one or two objects from libgnu
are needed to build the libraries, so in this case, it would be simple
to add the specific non-libtool-wrapped library and objects
to the link paths as needed, rather than use libtool to link
the libtool wrappers, which greatly reduces the need to patch.
Not using libtool also makes the original Makefile definitions for LIBADD
once again be the right ones to use. However, to be portable,
for libdw the wildcard function needs to be used in order to exclude
special archive members like "__.SYMDEF" which are not compiled objects
because some BSD-like versions of ar include that metadata in the list,
or because the library included may have objects from another subdirectory.
Also, the rest of the subdirectories have custom "LDLIBS" variables
meant for building shared objects only, so define the LIBADD variables
with objects from those existing definitions so that when building only
the static versions of the libraries, those objects can still be included.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
The version of posix_fallocate() patched into elfutils
for macOS using code from Mozilla is now patched into gnulib.
Import the fallocate-posix module and always link
the corresponding object to libraries whenever it is built.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a module to gnulib to support posix_fallocate()
for macOS and other systems that are missing it.
Apple-specific code is sourced from Mozilla,
and the rest from glibc, both licensed under LGPL.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Several changes to the elfutils source files
made during the process of figuring out how to
successfully build elfutils on macOS
turn out to not be necessary to do so,
and were most likely leftover bits during testing.
Remove the line changes that are not needed
and add some line changes to adapt to sources as is:
- Remove now unnecessary bump to autoconf version prereq
- AC_CONFIG_MACRO_DIRS is not necessary to define
as ACLOCAL_AMFLAGS is already defined in Makefiles
- let libtool "enable_static" variable also decide the value
of the local conditional BUILD_STATIC
- override configure variables instead of removing
checks for libraries or additions to LDFLAGS
- only exclude "hidden" attribute for macOS instead of deleting
- preserve original list of sources to build for libelf
- use openwrt Makefile to add gnulib headers
- use openwrt Makefile to add LIBADD variables
- remove deletion of variables and rules for shared objects
- prefer recursively expanded variables over muliple renames
each time that a word is added to its value
- remove changes to subdirectories that are not built
and remove changes to target files of those subdirectories
- prefer basic text rename over variables in cases where
there would be no line number difference
- give LT_INIT forced default values that match upstream
- move gl_EARLY and gl_INIT down relative to compiler checks
- reorganize some line changes to save some lines
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
The gnulib-tool script is written to have a fatal error
whenever the minimum required version of autoconf
for the project that gnulib is being imported into
as defined in configure.ac was less than
the minimum required version required by gnulib.
However, none of this matters if the version of autoconf
that we use is newer than both requirements.
Instead, use functions from the bootstrap script
to check for the version of autoconf being used
and print a warning whenever this case occurs.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Overriding variables used in both the macros and the headers
like setting REPLACE_FCNTL to 0 while invoking Make causes the
function aliases like rpl_fcntl() to not be defined,
however the object may still be built with the fnctl() function.
Usually this is enough for building while avoiding
the need to link the resulting libgnu library
to every single other build target for a project
in order to include the gnulib copy of the function,
because in these cases we don't care which version
of the function is used.
However for functions like fcntl() this doesn't work
as it is designed to use either the alias or standard declaration
from gnulib headers in order to be
a wrapper for the native host copy of fcntl()
by containing recursive calls to fcntl() within itself
after undefining the gnulib function declaration.
Overriding the variables used by the header when invoking Make
causes the header's declarations to be blocked,
and this results in the gnulib version of fcntl()
to call itself recursively and indefinitely
leading to segmentation faults.
Fix this by using macros defined with those variables
in order to exclude the function during preprocessing.
While at it, do the same for reallocarray()
so that the configure option --avoid=reallocarray
and Make variable REPLACE_REALLOCARRAY set to 0
would have a similar effect.
In the future this patch can be expanded to include
more functions and some version of this may be upstreamable.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15690
Signed-off-by: Robert Marko <robimarko@gmail.com>
These devices were already supported. I merely added missing entries to:
1. make them easier to locate in firmware selector
2. allow firmware upgrades to proceed without dire warnings
Sample dire warning contains:
upgrade: Device raspberrypi,model-zero-2-w not supported by this image
upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \
raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \
raspberrypi,3-model-b-plus raspberrypi,3-compute-module \
raspberrypi,compute-module-3 raspberrypi,model-zero-2
With this patch, the firmware upgrade proceeds normally.
Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
netifd supports more accurate "ports" option (instead of "ifname") for
years now. Relevant changes were even backported to OpenWrt 21.02. Add
uci-defaults script that translates config files using deprecated
syntax.
Identical commit f716c30241 ended up reverted back in 2021 by
80be798d4a due to breaking downgrades. With 19.07 support ended it
should no longer be an issue.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Convert line endings from DOS to Unix using dos2unix.
Fixes: 2da2705a44 ("ramips: add support for WINSTARS WS-WN536P3")
Fixes: 5560791bbd ("ramips: add support for OpenFi 5Pro Travel Router")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Detach URL from download script to make it easier to change and update
the URLs.
The mirror list is moved to a JSON file in the scripts directory called
projectsmirrors.json.
Link: https://github.com/openwrt/openwrt/pull/15745
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Instead of backporting select 1.35 fixes to make tar work for us, lets
update to 1.35 now that we have identified the upstream fix for macOS.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15743
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This symbol was removed upstream, but it was present on bcm27xx due to a
malformed upstream RPi patch.
Fixes: 8c405cdccc ("bcm27xx: add 6.6 kernel patches")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y
Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This is preparation for 6.6 kernel support. Copying files makes it easier to
track their git history.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Replace Silicon Labs patch with upstream version as they got merged in
kernel 6.3.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
[ rework commit title and description, use better patch ]
Link: https://github.com/openwrt/openwrt/pull/15300
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport RX timestamp flags patch needed for ath10k-ct to compile with
newer versions.
Link: https://github.com/openwrt/openwrt/pull/15735
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
LEDs support for ath10k has finally merged upstream hence replace it
with the upstream version.
Link: https://github.com/openwrt/openwrt/pull/15735
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
LEDs support for ath10k has finally merged upstream hence replace it
with the upstream version.
Link: https://github.com/openwrt/openwrt/pull/15735
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can pass the desired compression via cmdline, pass ZSTD as the
desired compression algorithm for F2FS.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
F2FS requires the compression algorith to be passed as argument while
mounting, so lets do so for the misc partition.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
In order to prolong the eMMC life and utilize ZSTD compression on Methode
devices, we must format the F2FS rootfs and misc partition with xattr and
compression support feature flags first.
This will only happen if partitions are broken currently, but later
commits will add support to convert existing boards to use compression.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Methode devices require mkfs.f2fs in order to format rootfs and misc
partitions if they have not already been formatted.
fdisk is required if partition table got broke so it can be regenerated.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
We would love to utilize ZSTD compression support in F2FS on the
Methode euroDPU so lets enable the required kernel support.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
This reverts commit dc9c5d1ee7.
Additional file for ath10k-ct slipped in, revert for a better version
pushed later.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
LEDs support for ath10k has finally merged upstream hence replace it
with the upstream version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
