ecf230710f
mvebu: update to 3.8-rc3
...
Signed-off-by: Florian Fainelli <florian@openwrt.org >
SVN-Revision: 35086
2013-01-10 17:20:25 +00:00
548cb59826
brcm47xx: update bgmac driver to the version in mainline kernel
...
SVN-Revision: 35083
2013-01-10 14:22:19 +00:00
885eea1842
kernel: update bcma and ssb to master-2013-01-09 from wireless-testing
...
SVN-Revision: 35080
2013-01-10 14:05:18 +00:00
a2950fabd4
clean up PCI bus topology
...
This makes the PCI bus topology more standard for devices behind a bridge
Signed-off-by: Tim Harvey <tharvey@gateworks.com >
SVN-Revision: 35079
2013-01-10 13:25:12 +00:00
b63b970866
clean up PCI bus topology
...
This makes the PCI bus topology more standard for devices behind a bridge
Signed-off-by: Tim Harvey <tharvey@gateworks.com >
SVN-Revision: 35078
2013-01-10 13:23:33 +00:00
64910f4490
fixes USB reset on ARV7518
...
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
4834d09a3f
fixes none-pci build
...
SVN-Revision: 35062
2013-01-09 09:04:09 +00:00
25475a095e
mvebu: add inital support for Marvell Armada XP/370 SoCs
...
This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:
- Ethernet
- SDIO
- GPIOs
- SATA
Signed-off-by: Florian Fainelli <florian@openwrt.org >
SVN-Revision: 35058
2013-01-08 22:20:16 +00:00
97acd10458
add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org >
SVN-Revision: 35057
2013-01-08 22:20:11 +00:00
9b601b79d0
add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org >
SVN-Revision: 35056
2013-01-08 22:20:06 +00:00
8dbed04ec9
kernel: add support for 3.8-rc2
...
Signed-off-by: Florian Fainelli <florian@openwrt.org >
SVN-Revision: 35055
2013-01-08 22:19:31 +00:00
7b0af8193b
brcm47xx: BGMAC Driver corrections
...
1) Fix what appears to be a logic error in bgmac_phy_advertise.
2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly. I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com >
SVN-Revision: 35052
2013-01-07 22:51:39 +00:00
4ec57bdc06
update to 3.7
...
Signed-off-by: Florian Fainelli <florian@openwrt.org >
SVN-Revision: 35045
2013-01-07 18:16:36 +00:00
ba4de984b9
ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
...
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.
Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.
Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr >.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 35037
2013-01-07 14:30:37 +00:00
251e4608b0
ar71xx: add missing Makefile entry to the 74HC153 GPIO patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 35035
2013-01-07 14:14:41 +00:00
5154270694
orion: debloat the kernel some more
...
SVN-Revision: 35023
2013-01-06 15:09:47 +00:00
75657ff8a9
kernel: add missing config symbol
...
SVN-Revision: 35021
2013-01-06 15:09:39 +00:00
f2f9332350
adds support for Edimax BR-6524N
...
fixes #12754
Signed-off-by: <rq@akl.lt >
SVN-Revision: 35020
2013-01-06 11:11:42 +00:00
d5d2e8b4db
missing underscore in 3.3 regmap patch
...
Signed-off-by: John Crispin <blogic@openwrt.org >
SVN-Revision: 35018
2013-01-06 10:01:53 +00:00
2e8409cce3
kernel: port the regmap fix to 3.6 ( #12749 ), refresh patches for other versions
...
SVN-Revision: 35016
2013-01-05 13:33:44 +00:00
e6aac19237
fix regmap debloat patch
...
SVN-Revision: 35015
2013-01-05 00:20:05 +00:00
e952eaa112
bcm63xx: Add Huawei HG556a support
...
Add Huawei EchoLife HG556a support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com >
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35011
2013-01-04 14:47:57 +00:00
0e58173fa5
bcm63xx: Fix caldata partition mtd patch
...
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com >
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com >
SVN-Revision: 35010
2013-01-04 14:47:50 +00:00
10fc07daac
bcm63xx: remove 3.3 support
...
3.6 is tested enough to be considered stable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org >
SVN-Revision: 35009
2013-01-04 14:47:43 +00:00
96f3911981
kernel: move regmap bloat out of the kernel image if it is only being used in modules
...
SVN-Revision: 34999
2013-01-03 18:39:50 +00:00
a105eea1a1
brcm47xx: various fixes and code cleanups for irq code
...
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com >
SVN-Revision: 34997
2013-01-03 16:56:54 +00:00
4443997fd8
brcm47xx: add bgmac driver
...
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.
Thanks to Rafał Miłecki <zajec5@gmail.com > for writing this driver.
SVN-Revision: 34995
2013-01-03 02:05:22 +00:00
8f6bdcffa1
brcm47xx: build b44 as a module
...
SVN-Revision: 34994
2013-01-03 02:00:25 +00:00
22d62d311a
brcm47xx: run ifup before starting the switch
...
In addition check_module is not needed, nobody checks the return value.
SVN-Revision: 34993
2013-01-03 01:59:43 +00:00
97b2b601c7
brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core
...
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK). IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com >
SVN-Revision: 34990
2013-01-03 01:56:13 +00:00
f74e847301
brcm47xx: improve IRQ handling for bcma based devices
...
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com >
SVN-Revision: 34989
2013-01-03 01:55:34 +00:00
25afeba608
brcm47xx: add a new version of the nvram rewrite patch
...
This is the version like it was send for mainline inclusion.
SVN-Revision: 34988
2013-01-03 01:53:30 +00:00
edc7ab525f
brcm47xx: move patches already in the mainline kernel to the front
...
SVN-Revision: 34987
2013-01-03 01:51:31 +00:00
76c767f122
brcm47xx: remove support for kernel version 3.3
...
SVN-Revision: 34986
2013-01-03 01:48:43 +00:00
7a73c2f91f
generic: add some missing kernel config symbols spotted on x86
...
SVN-Revision: 34981
2013-01-02 19:10:24 +00:00
741f6ba7ef
x86: fix typo in alix2/net5501 default packages
...
SVN-Revision: 34972
2013-01-02 16:09:23 +00:00
569bbe4970
rt5350 switch support fix
...
RT5350 frame engine need reset frame engine and embedded switch together.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru >
SVN-Revision: 34969
2013-01-02 11:28:21 +00:00
373b0b9ad1
generic: fix UBIFS build error if XZ compression is disabled
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34959
2013-01-02 08:53:07 +00:00
d91117459c
adm5120: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34954
2013-01-01 13:15:49 +00:00
f0520f1714
adm5120: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34953
2013-01-01 13:15:44 +00:00
b4315df8e1
adm5120: switch to 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34952
2013-01-01 13:15:41 +00:00
edd36342e5
adm5120: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34951
2013-01-01 13:15:36 +00:00
92cd48e9ea
adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c
...
Also add a compatibility patch for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34950
2013-01-01 13:15:30 +00:00
03e09078dc
adm5120: use mtd_read helper in trxsplit.c
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34949
2013-01-01 13:15:20 +00:00
e1b13e15b2
adm5120: don't include asm/system.h in adm5120-hcd.c
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34948
2013-01-01 13:15:16 +00:00
cbe5d664e1
generic: add missing symbol for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34947
2013-01-01 13:15:11 +00:00
e1965a1d1a
ar71xx: register the NAND flash controller device on the AP135/136 boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34946
2013-01-01 13:10:41 +00:00
66efec6783
ar71xx: allow to register the NAND flash controller on the QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34945
2013-01-01 13:10:36 +00:00
2c77e5d7b3
ar71xxx: allow to select ATH79_DEV_NFC for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34944
2013-01-01 13:10:34 +00:00
d8446d65fe
ar71xxx: allow to build the ar934x_nfc driver for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
SVN-Revision: 34943
2013-01-01 13:10:29 +00:00
