ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 08:21:14 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
59,569 Commits 9 Branches 76 Tags 921 MiB
0561613319
Commit Graph

6 Commits

Author SHA1 Message Date
Christian Marangi
19c45b95db
ramips: convert to new LED color/function format where possible 
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 2024-02-07 14:48:43 +01:00
Rosen Penev
f4c33d098f
ramips: mt7621: convert to nvmem-layout 
Allows replacing mac-address-increment with mac-base.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
 2023-11-26 01:30:32 +01:00
Shiji Yang
2c02a9b9e4
ramips: convert MT7610 and MT7612 EEPROM to NVMEM format for MT7621 
This patch converts MT7610 and MT7612 WiFi calibration data to NVMEM
format. The EEPROM size is 0x200.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2023-10-09 11:15:52 +02:00
Shiji Yang
fb4cea45ec
ramips: convert MT7603 EEPROM to NVMEM format 
This patch converts MT7603 WiFi calibration data to NVMEM format. The
EEPROM size is 0x400.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2023-10-09 11:15:52 +02:00
Felix Baumann
d87482a8db
ramips: fix dts whitespace 
Replace blanks with tabs
Remove whitespace from otherwise empty lines

Signed-off-by: Felix Baumann <felix.bau@gmx.de>
 2023-02-09 03:03:52 +01:00
Lea Teuberth
45255aa0e8 ramips: adding support for Asus RP-AC56 
Specifications:
	CPU:     MT7621A dual-core 880MHz
	RAM:     64MB DDR2
	FLASH:   16MB MX25L12805D NOR SPI
	WIFI:    2.4GHz 2x2 MT7603 b/g/n PCI
	WIFI:    5GHz 2x2 MT7662 a/b/ac PCI
	ETH:     1xLAN 1000base-T integrated
	SWITCH:  MT7530 Port 0: LAN, Port 6: CPU
	LED:     Power, 2.4GHz WiFi, 5GHz WiFi
	BTN:     WPS, Reset
	UART:    Near ETH port, from ETH: 3V3-TxD-GND-RxD 57600 8n1
	MISC:    Audio support

Installation:
	1. Update using recovery mode
	   - while holdig "reset" button, power on the device
	   - keep holding "reset" until power led is flashing yellow
	   - set own IP to 192.168.1.75, subnet mask: 255.255.255.0
	   - push firmware image (can be factory.bin or sysupgrade.bin)
	     using tftp client in binary mode to 192.168.1.1

Notes:
	This board has only two MAC addresses programmed in the "factory" partition:
	- MAC for wlan0 (2.4GHz) at offset 0x0004
	- MAC for wlan1 (5GHz) at offset 0x8004
	- stock firmware re-uses wlan0 MAC for ethernet
	- no valid addresses found in 0x28, 0x2e, 0xe000 and 0xe006

Signed-off-by: Lea Teuberth <lea.teuberth@outlook.com>
 2022-08-06 19:58:46 +02:00