mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
ramips: add support for D-Link DWR-960
The DWR-960 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610 mpcie card) - 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN) - 1x 10/100/1000 Mbps Ethernet (1 LAN) (AR8035) - 2x internal, non-detachable antennas (Wifi 2.4G) - 3x external, detachable antennas (2x LTE, 1x Wifi 5G) - 1x LTE modem - UART (J4) header on PCB (57600 8n1) - 9x LED, 2x button - JBOOT bootloader Known issues: - Flash is extremely slow. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Pawel Dembicki
Daniel Golle
parent
5a5a9b7a75
commit
c948a4782b
190
target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts
Normal file
190
target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts
Normal file
@ -0,0 +1,190 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dwr-960", "ralink,mt7620a-soc";
|
||||
model = "D-Link DWR-960";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status;
|
||||
led-failsafe = &led_status;
|
||||
led-running = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status: status {
|
||||
label = "dwr-960:green:status";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "dwr-960:green:wan";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "dwr-960:green:lan";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sms {
|
||||
label = "dwr-960:green:sms";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal_green {
|
||||
label = "dwr-960:green:signal";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
signal_red {
|
||||
label = "dwr-960:red:signal";
|
||||
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
4g {
|
||||
label = "dwr-960:green:4g";
|
||||
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
3g {
|
||||
label = "dwr-960:green:3g";
|
||||
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "dwr-960:green:wlan5g";
|
||||
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "dwr-960:green:wlan2g";
|
||||
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii2_pins &mdio_pins>;
|
||||
mediatek,portmap = "wllll";
|
||||
|
||||
port@5 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii-txid";
|
||||
phy-handle = <&phy7>;
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
status = "okay";
|
||||
|
||||
phy7: ethernet-phy@7 {
|
||||
reg = <7>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "jboot";
|
||||
reg = <0x0 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
compatible = "amit,jimage";
|
||||
label = "firmware";
|
||||
reg = <0x10000 0xfe0000>;
|
||||
};
|
||||
|
||||
config: partition@ff0000 {
|
||||
label = "config";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
mediatek,mtd-eeprom = <&config 0xe08e>;
|
||||
mtd-mac-address = <&config 0xe50e>;
|
||||
mtd-mac-address-increment = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
default {
|
||||
ralink,group = "i2c", "wled", "spi refclk", "uartf", "ephy";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
@ -279,6 +279,20 @@ define Device/dlink_dwr-922-e2
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dwr-922-e2
|
||||
|
||||
define Device/dlink_dwr-960
|
||||
$(Device/amit_jboot)
|
||||
SOC := mt7620a
|
||||
IMAGE_SIZE := 16256k
|
||||
DEVICE_VENDOR := D-Link
|
||||
DEVICE_MODEL := DWR-960
|
||||
DLINK_ROM_ID := DLK6E2429001
|
||||
DLINK_FAMILY_MEMBER := 0x6E24
|
||||
DLINK_FIRMWARE_SIZE := 0xFE0000
|
||||
DEVICE_PACKAGES += kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
|
||||
kmod-mt76x0e
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dwr-960
|
||||
|
||||
define Device/dovado_tiny-ac
|
||||
SOC := mt7620a
|
||||
IMAGE_SIZE := 7872k
|
||||
|
||||
@ -87,6 +87,9 @@ dlink,dwr-922-e2)
|
||||
ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
|
||||
ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
|
||||
;;
|
||||
dlink,dwr-960)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x2e"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
||||
dovado,tiny-ac)
|
||||
set_wifi_led "$boardname:orange:wifi"
|
||||
;;
|
||||
|
||||
@ -100,6 +100,10 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
|
||||
;;
|
||||
dlink,dwr-960)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0"
|
||||
;;
|
||||
edimax,br-6478ac-v2|\
|
||||
tplink,archer-c2-v1)
|
||||
ucidef_add_switch "switch1" \
|
||||
@ -273,6 +277,7 @@ ramips_setup_macs()
|
||||
dlink,dwr-118-a2|\
|
||||
dlink,dwr-921-c1|\
|
||||
dlink,dwr-922-e2|\
|
||||
dlink,dwr-960|\
|
||||
lava,lr-25g001)
|
||||
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
|
||||
@ -11,6 +11,9 @@ dlink,dir-510l)
|
||||
ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
|
||||
ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
|
||||
;;
|
||||
dlink,dwr-960)
|
||||
ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "0" "1"
|
||||
;;
|
||||
head-weblink,hdrm200)
|
||||
ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
|
||||
ucidef_add_gpio_switch "io1" "I/O 1" "1"
|
||||
|
||||
@ -28,6 +28,7 @@ case "$FIRMWARE" in
|
||||
dlink,dwr-118-a2|\
|
||||
dlink,dwr-921-c1|\
|
||||
dlink,dwr-922-e2|\
|
||||
dlink,dwr-960|\
|
||||
lava,lr-25g001)
|
||||
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
|
||||
wifi_mac=$(macaddr_add "$wan_mac" 1)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user