ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-04-08 11:54:53 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

qualcommax: ipq50xx: Linksys MX remove superfluous properties and fix indentation
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details

Browse Source 
On the ipq50xx platform, the internal GE PHY at phy address 7 on mdio0
must be enabled as it's used to detect the virtual switch in qca-ssdk.
This is a platform wide condition and is therefore part of the dtsi.
However, by enabling the mdio0 bus in board-specific dts files, the ge_phy
is implicitly enabled. So, let's remove the superfluous status property
in the dts files for Linksys MX2000 and MX5500.

While at it, remove the redundant phy-mode property as it's set to sgmii
by default in the ipq5018-ess.dtsi file and fix indentation in the
firmware property of the q5v6_wcss node.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18029
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
George Moussalem 2025-02-19 13:08:49 +04:00 committed by Robert Marko
parent eacc4d8c9b
commit b790989dff
2 changed files with 3 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx2000.dts
View File

@ -49,8 +49,6 @@
&dp2 {
status = "okay";
phy-mode = "sgmii";
nvmem-cells = <&hw_mac_addr 0>;
nvmem-cell-names = "mac-address";
@ -64,13 +62,6 @@
status = "okay";
};
/* IPQ5018 GE Phy -> Not connected
* needs to be enabled for QSDK to identify the IPQ5018 dummy switch
*/
&ge_phy {
status = "okay";
};
&mdio1 {
status = "okay";
@ -159,8 +150,8 @@
memory-region = <&q6_mem_regions>;
firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
"ath11k/IPQ5018/hw1.0/m3_fw.mdt",
"ath11k/QCN6122/hw1.0/m3_fw.mdt";
"ath11k/IPQ5018/hw1.0/m3_fw.mdt",
"ath11k/QCN6122/hw1.0/m3_fw.mdt";
/* The QCN6102 radio should map to UPD ID 2. Without */
/* bootargs, the firmware will expect it to be on UPD ID 3 */

11
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx5500.dts
View File

@ -49,8 +49,6 @@
&dp2 {
status = "okay";
phy-mode = "sgmii";
nvmem-cells = <&hw_mac_addr 0>;
nvmem-cell-names = "mac-address";
@ -64,13 +62,6 @@
status = "okay";
};
/* IPQ5018 GE Phy -> Not connected
* needs to be enabled for QSDK to identify the IPQ5018 dummy switch
*/
&ge_phy {
status = "okay";
};
&mdio1 {
status = "okay";
@ -186,7 +177,7 @@
memory-region = <&q6_mem_regions>;
firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
"ath11k/IPQ5018/hw1.0/m3_fw.mdt";
"ath11k/IPQ5018/hw1.0/m3_fw.mdt";
// IPQ5018
q6_wcss_pd1: pd-1 {