ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-04-09 04:15:47 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

qualcommax: ipq50xx: use ascii-env driver to set mac address for Linksys MX devices

Browse Source 
The ascii-env driver enables reading name pair values from nand in ascii layout.
So, let's pick up and set the mac address accordingly.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18029
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
George Moussalem 2025-02-06 12:14:27 +04:00 committed by Robert Marko
parent ab80e6c684
commit eacc4d8c9b
6 changed files with 26 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/qualcommax/config-6.6
View File

@ -278,6 +278,7 @@ CONFIG_NR_CPUS=4
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_NVMEM=y
CONFIG_NVMEM_LAYOUTS=y
CONFIG_NVMEM_LAYOUT_ASCII_ENV=y
CONFIG_NVMEM_LAYOUT_U_BOOT_ENV=y
CONFIG_NVMEM_QCOM_QFPROM=y
# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set

14
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx-base.dtsi
View File

@ -8,8 +8,6 @@
/ {
aliases {
ethernet0 = &dp1;
ethernet1 = &dp2;
led-boot = &led_system_blue;
led-failsafe = &led_system_red;
led-running = &led_system_blue;
@ -209,6 +207,18 @@
label = "devinfo";
reg = <0x00680000 0x40000>;
read-only;
nvmem-layout {
compatible = "ascii-eq-delim-env";
#address-cells = <1>;
#size-cells = <1>;
hw_mac_addr: hw_mac_addr {
compatible = "mac-base";
#nvmem-cell-cells = <1>;
};
};
};
partition@6c0000 {

4
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx2000.dts
View File

@ -48,8 +48,12 @@
// MAC1 ---SGMII---> QCA8337 SerDes
&dp2 {
status = "okay";
phy-mode = "sgmii";
nvmem-cells = <&hw_mac_addr 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;

4
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx5500.dts
View File

@ -48,8 +48,12 @@
// MAC1 ---SGMII---> QCA8337 SerDes
&dp2 {
status = "okay";
phy-mode = "sgmii";
nvmem-cells = <&hw_mac_addr 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;

5
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts
View File

@ -53,6 +53,9 @@
// MAC0 -> GE Phy
&dp1 {
status = "okay";
nvmem-cells = <&hw_mac_addr 0>;
nvmem-cell-names = "mac-address";
};
// MAC1 ---SGMII---> QCA8081
@ -61,6 +64,8 @@
label = "wan";
phy-handle = <&qca8081>;
nvmem-cells = <&hw_mac_addr 0>;
nvmem-cell-names = "mac-address";
};
&mdio0 {

24
target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network
View File

@ -15,33 +15,9 @@ ipq50xx_setup_interfaces()
esac
}
ipq50xx_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
local label_mac=""
case "$board" in
linksys,mx2000|\
linksys,mx5500|\
linksys,spnmx56)
label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
lan_mac=$label_mac
wan_mac=$label_mac
ucidef_set_network_device_mac eth0 $label_mac
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}
board_config_update
board=$(board_name)
ipq50xx_setup_interfaces $board
ipq50xx_setup_macs $board
board_config_flush
exit 0