lantiq: use ath9k device tree bindings binding/owl-loader

This moves the extraction of the eeprom/calibration data to a hotplug
firmware script. Additionally it modifies all .dts to configure ath9k
directly from within the .dts.

The owl-loader approach enables support on devices with exotic eeprom
data locations (such as unaligned positions on the flash or data
inside an UBI volume).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[add ath9k caldata mac address patcher]
[fixes DGN3500 wifi mac]
[fixes BTHOMEHUBV3A wifi mac]
[set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior]
Signed-off-by: Mathias Kresin <dev@kresin.me>

target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom

@@ -0,0 +1,140 @@
+#!/bin/sh
+# Based on ar71xx 10-ath9k-eeprom
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+. /lib/upgrade/nand.sh
+
+# xor multiple hex values of the same length
+xor() {
+	local val
+	local ret="0x$1"
+	local retlen=${#1}
+
+	shift
+	while [ -n "$1" ]; do
+		val="0x$1"
+		ret=$((ret ^ val))
+		shift
+	done
+
+	printf "%0${retlen}x" "$ret"
+}
+
+ath9k_eeprom_die() {
+	echo "ath9k eeprom: $*"
+	exit 1
+}
+
+ath9k_eeprom_extract_raw() {
+	local source=$1
+	local offset=$2
+	local size=4096
+
+	dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$size 2>/dev/null || \
+			ath9k_eeprom_die "failed to extract from $mtd"
+}
+
+ath9k_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local mtd
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || \
+		ath9k_eeprom_die "no mtd device found for partition $part"
+
+	ath9k_eeprom_extract_raw $mtd $offset
+}
+
+ath9k_ubi_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local ubidev=$(nand_find_ubi $CI_UBIPART)
+	local ubi
+
+	ubi=$(nand_find_volume $ubidev $part)
+	[ -n "$ubi" ] || \
+		ath9k_eeprom_die "no UBI volume found for $part"
+
+	ath9k_eeprom_extract_raw /dev/$ubi $offset
+}
+
+ath9k_patch_firmware_mac() {
+	local mac=$1
+	local mac_offset=$2
+	local swap=$3
+	local chksum_offset=$4
+	local xor_mac
+	local xor_fw_mac
+	local xor_fw_chksum
+
+	[ -z "$mac" -o -z "$mac_offset" ] && return
+
+	[ $swap -gt 0 ] && mac="${mac:3:2}:${mac:0:2}:${mac:9:2}:${mac:6:2}:${mac:15:2}:${mac:12:2}"
+
+	[ -n "$chksum_offset" ] && {
+		xor_mac=${mac//:/}
+		xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+
+		xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+		xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
+
+		xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+		xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+
+		printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+			dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+	}
+
+	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6
+}
+
+case "$FIRMWARE" in
+	"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
+	"ath9k-eeprom-pci-0000:01:00.0.bin" | \
+	"ath9k-eeprom-pci-0000:02:00.0.bin")
+		board=$(lantiq_board_name)
+
+		case "$board" in
+			ARV7518PW)
+				ath9k_eeprom_extract "boardconfig" 1024
+				;;
+			ARV8539PW22)
+				ath9k_eeprom_extract "art" 1024
+				;;
+			BTHOMEHUBV2B)
+				ath9k_eeprom_extract "art" 0
+				ath9k_patch_firmware_mac "00:00:00:00:00:00" 524 1 514
+				;;
+			BTHOMEHUBV3A)
+				ath9k_eeprom_extract "art-copy" 0
+				ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 268 1 258
+				;;
+			BTHOMEHUBV5A)
+				ath9k_eeprom_extract "caldata" 4096
+				;;
+			DGN3500*)
+				ath9k_eeprom_extract "calibration" 61440
+				ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 0 514
+				;;
+			FRITZ3370)
+				ath9k_eeprom_extract "urlader" 2437
+				ath9k_patch_firmware_mac "00:00:00:00:00:00" 2 0
+				;;
+			FRITZ7320|FRITZ7360SL)
+				ath9k_eeprom_extract "urlader" 2437
+				ath9k_patch_firmware_mac "00:00:00:00:00:00" 268 0 258
+				;;
+			TDW8970|TDW8980)
+				ath9k_eeprom_extract "boardconfig" 135168
+				;;
+			*)
+				ath9k_eeprom_die "board $board is not supported yet"
+				;;
+		esac
+		;;
+esac

target/linux/lantiq/dts/ARV7518PW.dts

@@ -79,15 +79,6 @@
 				gpio-controller;
 				lantiq,shadow = <0x0>;
 			};
-
-			ath9k_eep {
-				compatible = "ath9k,eeprom";
-				ath,eep-flash = <&boardconfig 0x400>;
-				ath,mac-offset = <0x16>;
-				ath,mac-increment = <1>;
-				ath,pci-slot = <14>;
-				ath,eep-endian;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -139,13 +130,6 @@
 			status = "okay";
 			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0xf>;
-		};
 	};
 
 /*
@@ -230,3 +214,18 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	lantiq,external-clock;
+	req-mask = <0xf>;
+
+	wifi@168c,0029 {
+		compatible = "pci168c,0029";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};

target/linux/lantiq/dts/ARV8539PW22.dts

@@ -66,15 +66,6 @@
 					};
 				};
 			};
-
-			ath9k_eep {
-				compatible = "ath9k,eeprom";
-				ath,eep-flash = <&art 0x400>;
-				ath,mac-offset = <0x16>;
-				ath,mac-increment = <1>;
-				ath,pci-slot = <14>;
-				ath,eep-endian;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -111,11 +102,6 @@
 			mtd-mac-address = <&art 0x16>;
 		};
 
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-
 		ifxhcd@E101000 {
 			status = "okay";
 			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
@@ -175,3 +161,15 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,0029 {
+		compatible = "pci168c,0029";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+		mtd-mac-address = <&art 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};

target/linux/lantiq/dts/BTHOMEHUBV2B.dts

@@ -104,14 +104,6 @@
 					};
 				};
 			};
-
-			ath9k_eep {
-				compatible = "ath9k,eeprom";
-				ath,eep-flash = <&ath9k_cal 0x0000>;
-				ath,mac-increment = <1>;
-				ath,pci-slot = <14>;
-				ath,eep-endian;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -177,11 +169,6 @@
 		gpios: stp@E100BB0 {
 			status = "okay";
 		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
 	};
 
 	gpio-keys-polled {
@@ -262,3 +249,13 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,0027 {
+		compatible = "pci168c,0027";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};

target/linux/lantiq/dts/BTHOMEHUBV3A.dts

@@ -75,13 +75,6 @@
 					};
 				};
 			};
-
-			ath9k_eep {
-				compatible = "ath9k,eeprom";
-				ath,eep-flash = <&ath9k_cal 0x0000>;
-				ath,pci-slot = <14>;
-				ath,eep-endian;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -134,11 +127,6 @@
 			status = "okay";
 			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
 	};
 
 	gpio-keys-polled {
@@ -207,3 +195,13 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	ath9k@7000 {
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};

target/linux/lantiq/dts/BTHOMEHUBV5A.dts

@@ -111,11 +111,6 @@
 			status = "okay";
 			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
 	};
 
 	gphy-xrx200 {
@@ -125,14 +120,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ath9k_eep {
-		compatible = "ath9k,eeprom";
-		ath,eep-flash = <&caldata 0x1000>;
-		ath,mac-offset = <0x110c>;
-		ath,mac-increment = <2>;
-		ath,pci-slot = <0xe>; /* 14 */
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -211,6 +198,20 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,002d {
+		compatible = "pci168c,002d";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+		qca,disable-5ghz;
+		mtd-mac-address = <&caldata 0x110c>;
+		mtd-mac-address-increment = <2>;
+	};
+};
+
 &eth0 {
 	lan: interface@0 {
 		compatible = "lantiq,xrx200-pdi";

target/linux/lantiq/dts/DGN3500.dtsi

@@ -69,19 +69,6 @@
 		ifxhcd@E101000 {
 			status = "okay";
 		};
-
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	ath9k_eep {
-		compatible = "ath9k,eeprom";
-		ath,eep-flash = <&ath9k_cal 0xf000>;
-		ath,pci-slot = <14>;
-		ath,eep-endian;
-		ath,eep-swap;
 	};
 
 	rtl8366rb {
@@ -153,6 +140,17 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,0029 {
+		compatible = "pci168c,0029";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};
+
 &spi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_spi_default>;

target/linux/lantiq/dts/FRITZ3370.dts

@@ -118,13 +118,6 @@
 		};
 	};
 
-	ath9k_eep {
-		compatible = "ath9k,eeprom";
-		ath,eep-flash = <&ath9k_cal 0x985>;
-		ath,eep-endian;
-		ath,eep-swap;
-	};
-
 	gphy-xrx200 {
 		compatible = "lantiq,phy-xrx200";
 		firmware = "lantiq/vr9_phy11g_a1x.bin";
@@ -196,7 +189,7 @@
 		reg = <4 0>;
 		spi-max-frequency = <1000000>;
 
-		ath9k_cal: partition@0 {
+		partition@0 {
 			reg = <0x0 0x20000>;
 			label = "urlader";
 			read-only;
@@ -275,3 +268,19 @@
 		};
 	};
 };
+
+&pcie0 {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		wifi@0,0 {
+			compatible = "pci0,0";
+			reg = <0 0 0 0 0>;
+			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+		};
+	};
+};

target/linux/lantiq/dts/FRITZ7320.dts

@@ -65,14 +65,6 @@
 			};
 		};
 
-		ath9k_eep {
-			compatible = "ath9k,eeprom";
-			ath,eep-flash = <&ath9k_cal 0x985>;
-			ath,device-id = /bits/ 16 <0xff1d 0x2d>;
-			ath,eep-endian;
-			ath,eep-swap;
-		};
-
 		gpio: pinmux@E100B10 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
@@ -103,12 +95,6 @@
 		ifxhcd@E101000 {
 			status = "okay";
 		};
-
-		pci@E105400 {
-			status = "okay";
-			req-mask = <0xf>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
 	};
 
 	gpio-keys-polled {
@@ -158,3 +144,15 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	req-mask = <0xf>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};

target/linux/lantiq/dts/FRITZ7360SL.dts

@@ -96,14 +96,6 @@
 		};
 	};
 
-	ath9k_eep {
-		compatible = "ath9k,eeprom";
-		ath,eep-flash = <&urlader 0x985>;
-		ath,eep-endian;
-		ath,eep-swap;
-		ath,pci-slot = <0>;
-	};
-
 	gphy-xrx200 {
 		compatible = "lantiq,phy-xrx200";
 		firmware = "lantiq/vr9_phy11g_a2x.bin";
@@ -217,3 +209,19 @@
 		};
 	};
 };
+
+&pcie0 {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		wifi@168c,002e {
+			compatible = "pci168c,002e";
+			reg = <0 0 0 0 0>;
+			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+		};
+	};
+};

target/linux/lantiq/dts/TDW8980.dts

@@ -25,10 +25,6 @@
 		};
 	};
 
-	ath9k_eep {
-		ath,pci-slot = <0>;
-	};
-
 	gpio-leds {
 		wifi2 {
 			label = "tdw8980:green:wlan5ghz";

target/linux/lantiq/dts/TDW89X0.dtsi

@@ -14,6 +14,7 @@
 
 		led-dsl = &dsl;
 		led-internet = &internet;
+		led-wifi = &wifi;
 		led-usb = &usb0;
 		led-usb2 = &usb2;
 	};
@@ -83,16 +84,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ath9k_eep {
-		compatible = "ath9k,eeprom";
-		ath,eep-flash = <&ath9k_cal 0x21000>;
-		ath,mac-offset = <0xf100>;
-		ath,mac-increment = <2>;
-		ath,led-pin = <0>;
-		ath,disable-5ghz;
-		ath,led-active-high;
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -144,6 +135,15 @@
 			gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	wifi-leds {
+		compatible = "gpio-leds";
+
+		wifi: wifi {
+			label = "tdw89x0:green:wifi";
+			gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &spi {
@@ -249,3 +249,24 @@
 		};
 	};
 };
+
+&pcie0 {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		ath9k: wifi@168c,002e {
+			compatible = "pci168c,002e";
+			reg = <0 0 0 0 0>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			qca,no-eeprom;
+			qca,disable-5ghz;
+			mtd-mac-address = <&ath9k_cal 0xf100>;
+			mtd-mac-address-increment = <2>;
+		};
+	};
+};

target/linux/lantiq/image/Makefile

@@ -176,7 +176,7 @@ define Device/BTHOMEHUBV2B
 	kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
 	kmod-ltq-deu-danube \
 	ltq-adsl-app ppp-mod-pppoa \
-	kmod-ath9k wpad-mini
+	kmod-ath9k kmod-owl-loader wpad-mini
 endef
 TARGET_DEVICES += BTHOMEHUBV2B
 
@@ -258,7 +258,7 @@ define Device/ARV7518PW
 	kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
 	kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
 	ltq-adsl-app ppp-mod-pppoa \
-	kmod-ath9k wpad-mini
+	kmod-ath9k kmod-owl-loader wpad-mini
 endef
 TARGET_DEVICES += ARV7518PW
 
@@ -304,7 +304,7 @@ define Device/ARV8539PW22
 	kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
 	kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
 	ltq-adsl-app ppp-mod-pppoa \
-	kmod-ath9k wpad-mini
+	kmod-ath9k kmod-owl-loader wpad-mini
 endef
 TARGET_DEVICES += ARV8539PW22
 
@@ -330,7 +330,8 @@ define Device/BTHOMEHUBV3A
 	kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
 	kmod-ltq-deu-ar9 \
 	ltq-adsl-app ppp-mod-pppoa \
-	kmod-ath9k wpad-mini uboot-envtools
+	kmod-ath9k kmod-owl-loader wpad-mini \
+	uboot-envtools
 endef
 TARGET_DEVICES += BTHOMEHUBV3A
 
@@ -357,7 +358,7 @@ define Device/DGN3500
 	check-size 16320k | pad-to 16384k
   DEVICE_TITLE := Netgear DGN3500
   DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
-	kmod-ath9k wpad-mini \
+	kmod-ath9k kmod-owl-loader wpad-mini \
 	kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
 	kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
 	ltq-adsl-app ppp-mod-pppoa \
@@ -377,7 +378,7 @@ define Device/DGN3500B
 	check-size 16320k | pad-to 16384k
   DEVICE_TITLE := Netgear DGN3500B
   DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
-	kmod-ath9k wpad-mini \
+	kmod-ath9k kmod-owl-loader wpad-mini \
 	kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
 	kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
 	ltq-adsl-app ppp-mod-pppoa \
@@ -393,7 +394,7 @@ define Device/WBMRA
 	kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
 	kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
 	ltq-adsl-app ppp-mod-pppoa \
-	kmod-ath9k wpad-mini
+	kmod-ath9k kmod-owl-loader wpad-mini
 endef
 TARGET_DEVICES += WBMRA
 
@@ -405,7 +406,7 @@ define Device/WBMRB
 	kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
 	kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
 	ltq-adsl-app ppp-mod-pppoa \
-	kmod-ath9k wpad-mini
+	kmod-ath9k kmod-owl-loader wpad-mini
 endef
 TARGET_DEVICES += WBMRB
 
@@ -413,12 +414,11 @@ define Device/FRITZ7320
   $(Device/AVM)
   IMAGE_SIZE := 15744k
   DEVICE_TITLE := 1&1 HomeServer - FRITZ7320
-  DEVICE_PACKAGES := kmod-ath9k wpad-mini \
+  DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini \
 	kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
 	kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
 	ltq-adsl-app ppp-mod-pppoa \
-	kmod-ltq-deu-ar9 kmod-usb-dwc2 \
+	kmod-ltq-deu-ar9 kmod-usb-dwc2 -swconfig
-	kmod-ath9k wpad-mini -swconfig
 endef
 TARGET_DEVICES += FRITZ7320
 
@@ -477,7 +477,8 @@ TARGET_DEVICES += ARV7519RW22
 define Device/BTHOMEHUBV5A
   $(Device/NAND)
   DEVICE_TITLE := BT Home Hub 5A
-  DEVICE_PACKAGES := kmod-ath9k kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
+  DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \
+	kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
 endef
 TARGET_DEVICES += BTHOMEHUBV5A
 
@@ -485,14 +486,14 @@ define Device/EASY80920NAND
   $(Device/lantiqFullImage)
   IMAGE_SIZE := 64512k
   DEVICE_TITLE := Lantiq VR9 - EASY80920NAND
-  DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += EASY80920NAND
 
 define Device/EASY80920NOR
   IMAGE_SIZE := 7936k
   DEVICE_TITLE := Lantiq VR9 - EASY80920NOR
-  DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += EASY80920NOR
 
@@ -508,7 +509,7 @@ define Device/FRITZ7360SL
   $(Device/AVM)
   IMAGE_SIZE := 15744k
   DEVICE_TITLE := 1&1 HomeServer - FRITZ7360SL
-  DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2
+  DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2
 endef
 TARGET_DEVICES += FRITZ7360SL
 

target/linux/lantiq/image/tp-link.mk

@@ -33,7 +33,7 @@ define Device/TDW8980
   BOARD_ID := TD-W8980v1
   IMAGE_SIZE := 7680k
   DEVICE_TITLE := TP-LINK TD-W8980
-  DEVICE_PACKAGES:= kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
 endef
 
 define Device/VR200v