openwrt/target/linux/lantiq/dts/ARV7518PW.dts
Martin Blumenstingl a20616863d lantiq: use ath9k device tree bindings binding/owl-loader
This moves the extraction of the eeprom/calibration data to a hotplug
firmware script. Additionally it modifies all .dts to configure ath9k
directly from within the .dts.

The owl-loader approach enables support on devices with exotic eeprom
data locations (such as unaligned positions on the flash or data
inside an UBI volume).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[add ath9k caldata mac address patcher]
[fixes DGN3500 wifi mac]
[fixes BTHOMEHUBV3A wifi mac]
[set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-29 21:40:16 +01:00

232 lines
4.4 KiB
Plaintext

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ARV7518PW - Astoria Networks";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &online_green;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7d0000>;
};
boardconfig: partition@400000 {
label = "boardconfig";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x0>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
lantiq,output = <1>;
};
keys {
lantiq,pins = "io28", "io30";
lantiq,output = <0>;
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
/*
#define SWITCH_RESET 13
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv7518pw:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl: dsl {
label = "arv7518pw:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
online_green: online {
label = "arv7518pw:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv7518pw:green:wlan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
power_red: power2 {
label = "arv7518pw:red:power";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
online2 {
label = "arv7518pw:red:internet";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "arv7518pw:green:usb";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv7518pw:green:voip";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv7518pw:green:phone1";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv7518pw:green:phone2";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
unlabeled {
label = "arv7518pw:amber:unlabeled";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv7518pw:amber:wps";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv7518pw:green:wps";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wps3 {
label = "arv7518pw:red:wps";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
lantiq,external-clock;
req-mask = <0xf>;
wifi@168c,0029 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};