rockchip: enable drivers for rk356x

Enable all necessary drivers for the rk356x SoCs, including PHY,
SCMI, SPI etc. Also backport 2 upstream patches for sdhci fixes.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

target/linux/rockchip/armv8/config-6.1

@@ -66,6 +66,15 @@ CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
 CONFIG_ARM_PSCI_FW=y
 # CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
+CONFIG_ARM_SCMI_CPUFREQ=y
+CONFIG_ARM_SCMI_HAVE_SHMEM=y
+CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
+CONFIG_ARM_SCMI_POWER_CONTROL=y
+CONFIG_ARM_SCMI_POWER_DOMAIN=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
+CONFIG_ARM_SCMI_TRANSPORT_SMC=y
+CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE=y
 CONFIG_ARM_SCPI_CPUFREQ=y
 CONFIG_ARM_SCPI_POWER_DOMAIN=y
 CONFIG_ARM_SCPI_PROTOCOL=y
@@ -112,7 +121,7 @@ CONFIG_CMA_ALIGNMENT=8
 CONFIG_CMA_AREAS=7
 # CONFIG_CMA_DEBUG is not set
 # CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
+CONFIG_CMA_SIZE_MBYTES=16
 # CONFIG_CMA_SIZE_SEL_MAX is not set
 CONFIG_CMA_SIZE_SEL_MBYTES=y
 # CONFIG_CMA_SIZE_SEL_MIN is not set
@@ -121,6 +130,7 @@ CONFIG_CMA_SIZE_SEL_MBYTES=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_ROCKCHIP=y
+CONFIG_COMMON_CLK_SCMI=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
 CONFIG_COMPAT_32BIT_TIME=y
@@ -292,6 +302,7 @@ CONFIG_I2C_COMPAT=y
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_RK3X=y
 CONFIG_IIO=y
+# CONFIG_IIO_SCMI is not set
 CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
 CONFIG_INDIRECT_PIO=y
 CONFIG_INPUT=y
@@ -300,7 +311,7 @@ CONFIG_INPUT_FF_MEMLESS=y
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_INPUT_LEDS=y
 CONFIG_INPUT_MATRIXKMAP=y
-# CONFIG_INPUT_RK805_PWRKEY is not set
+CONFIG_INPUT_RK805_PWRKEY=y
 CONFIG_IOMMU_API=y
 # CONFIG_IOMMU_DEBUGFS is not set
 # CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
@@ -457,9 +468,9 @@ CONFIG_PHY_ROCKCHIP_EMMC=y
 # CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
 # CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-# CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY is not set
+CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
 CONFIG_PHY_ROCKCHIP_PCIE=y
-# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
 CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PHY_ROCKCHIP_USB=y
 CONFIG_PINCTRL=y
@@ -514,6 +525,7 @@ CONFIG_REGMAP_I2C=y
 CONFIG_REGMAP_IRQ=y
 CONFIG_REGMAP_MMIO=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_ARM_SCMI=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
@@ -521,6 +533,7 @@ CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK808=y
 CONFIG_RELOCATABLE=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SCMI=y
 CONFIG_RFS_ACCEL=y
 CONFIG_ROCKCHIP_GRF=y
 CONFIG_ROCKCHIP_IODOMAIN=y
@@ -549,6 +562,7 @@ CONFIG_SCSI_SAS_ATTRS=y
 CONFIG_SCSI_SAS_HOST_SMP=y
 CONFIG_SCSI_SAS_LIBSAS=y
 # CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
 CONFIG_SERIAL_8250_DW=y
@@ -584,7 +598,7 @@ CONFIG_SPI_DYNAMIC=y
 CONFIG_SPI_MASTER=y
 CONFIG_SPI_MEM=y
 CONFIG_SPI_ROCKCHIP=y
-# CONFIG_SPI_ROCKCHIP_SFC is not set
+CONFIG_SPI_ROCKCHIP_SFC=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
 CONFIG_SQUASHFS_DECOMP_SINGLE=y

target/linux/rockchip/patches-6.1/001-v6.3-mmc-sdhci-of-dwcmshc-Update-DLL-and-pre-change-delay-for.patch

@@ -0,0 +1,60 @@
+From b75a52b0dda353aeefb4830a320589a363f49579 Mon Sep 17 00:00:00 2001
+From: Shawn Lin <shawn.lin@rock-chips.com>
+Date: Thu, 2 Feb 2023 08:35:16 +0800
+Subject: [PATCH] mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for
+ rockchip platform
+
+For Rockchip platform, DLL bypass bit and start bit need to be set if
+DLL is not locked. And adjust pre-change delay to 0x3 for better signal
+test result.
+
+Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
+Link: https://lore.kernel.org/r/1675298118-64243-2-git-send-email-shawn.lin@rock-chips.com
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+---
+ drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
++++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
+@@ -48,6 +48,7 @@
+ #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL	29
+ #define DWCMSHC_EMMC_DLL_START_POINT	16
+ #define DWCMSHC_EMMC_DLL_INC		8
++#define DWCMSHC_EMMC_DLL_BYPASS		BIT(24)
+ #define DWCMSHC_EMMC_DLL_DLYENA		BIT(27)
+ #define DLL_TXCLK_TAPNUM_DEFAULT	0x10
+ #define DLL_TXCLK_TAPNUM_90_DEGREES	0xA
+@@ -60,6 +61,7 @@
+ #define DLL_RXCLK_NO_INVERTER		1
+ #define DLL_RXCLK_INVERTER		0
+ #define DLL_CMDOUT_TAPNUM_90_DEGREES	0x8
++#define DLL_RXCLK_ORI_GATE		BIT(31)
+ #define DLL_CMDOUT_TAPNUM_FROM_SW	BIT(24)
+ #define DLL_CMDOUT_SRC_CLK_NEG		BIT(28)
+ #define DLL_CMDOUT_EN_SRC_CLK_NEG	BIT(29)
+@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(str
+ 	sdhci_writel(host, extra, reg);
+ 
+ 	if (clock <= 52000000) {
+-		/* Disable DLL and reset both of sample and drive clock */
+-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
+-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
++		/*
++		 * Disable DLL and reset both of sample and drive clock.
++		 * The bypass bit and start bit need to be set if DLL is not locked.
++		 */
++		sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
++		sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
+ 		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
+ 		sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
+ 		/*
+@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(str
+ 	}
+ 
+ 	extra = 0x1 << 16 | /* tune clock stop en */
+-		0x2 << 17 | /* pre-change delay */
++		0x3 << 17 | /* pre-change delay */
+ 		0x3 << 19;  /* post-change delay */
+ 	sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
+ 

target/linux/rockchip/patches-6.1/002-v6.4-mmc-sdhci-of-dwcmshc-properly-determine-max-clock-on.patch

@@ -0,0 +1,52 @@
+From 49502408007b77ff290ce62e6218cefaeedcb31a Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Thu, 9 Mar 2023 17:03:49 -0800
+Subject: [PATCH] mmc: sdhci-of-dwcmshc: properly determine max clock on
+ Rockchip
+
+Currently .get_max_clock returns the current clock rate for cclk_emmc
+on rk35xx, thus max clock gets set to whatever bootloader set it to.
+
+In case of u-boot, it is intentionally reset to 50 MHz if it boots
+from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
+HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
+clears appropriate caps if host->mmc->f_max is < 52MHz
+
+cclk_emmc is not a fixed clock on rk35xx, so using
+sdhci_pltfm_clk_get_max_clock is not appropriate here.
+
+Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Adrian Hunter <adrian.hunter@intel.com>
+Link: https://lore.kernel.org/r/20230310010349.509132-1-anarsoul@gmail.com
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+---
+ drivers/mmc/host/sdhci-of-dwcmshc.c | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
++++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
+@@ -126,6 +126,13 @@ static unsigned int dwcmshc_get_max_cloc
+ 		return pltfm_host->clock;
+ }
+ 
++static unsigned int rk35xx_get_max_clock(struct sdhci_host *host)
++{
++	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
++
++	return clk_round_rate(pltfm_host->clk, ULONG_MAX);
++}
++
+ static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
+ 				     struct mmc_request *mrq)
+ {
+@@ -343,7 +350,7 @@ static const struct sdhci_ops sdhci_dwcm
+ 	.set_clock		= dwcmshc_rk3568_set_clock,
+ 	.set_bus_width		= sdhci_set_bus_width,
+ 	.set_uhs_signaling	= dwcmshc_set_uhs_signaling,
+-	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
++	.get_max_clock		= rk35xx_get_max_clock,
+ 	.reset			= rk35xx_sdhci_reset,
+ 	.adma_write_desc	= dwcmshc_adma_write_desc,
+ };