ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 05:38:00 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

ath79: add support for TP-Link CPE710-v2

Browse Source 
TP-Link CPE710-v2 is an outdoor wireless CPE for 5 GHz with one Ethernet
port based on the AP152 reference board. Compared to the CPE710-v1, the
only change observed in hardware is that the mdio address of the ethernet
physical changed from 0x4 to 0x0.

Specifications:
- SoC: QCA9563-AL3A MIPS 74kc @ 775MHz, AHB @ 258MHz
- RAM: 128MiB DDR2 @ 650MHz
- Flash: 16MiB SPI NOR Based on the GD25Q128
- Wi-Fi 5Ghz: ath10k chip (802.11ac for up to 867Mbps on 5GHz wireless
  data rate), based on the QCA9896
- Ethernet: one 1GbE port
- 23dBi high-gain directional 2×2 MIMO parabolic antenna
- Power, LAN, WLAN5G Blue LEDs

Flashing instructions:
Flash factory image through stock firmware WEB UI or through TFTP
To get to TFTP recovery just hold reset button while powering on for around
30-40 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254

Signed-off-by: Tim Noack <tim@noack.id>
Link: https://github.com/openwrt/openwrt/pull/16637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5572e0196a)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Tim Noack 2024-10-21 12:21:59 +00:00 committed by Petr Štetiar
parent 1e0f790d23
commit 0b4d831886
No known key found for this signature in database
GPG Key ID: 58EE120F30CC02D3
4 changed files with 34 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
target/linux/ath79/dts/qca9563_tplink_cpe710-v2.dts Normal file
View File

@ -0,0 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_tplink_cpe710.dtsi"
/ {
model = "TP-Link CPE710 v2";
compatible = "tplink,cpe710-v2", "qca,qca9563";
};
&mdio0 {
phy0: ethernet-phy@0 {
reg = <0>;
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
&eth0 {
phy-handle = <&phy0>;
phy-mode = "sgmii";
};

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -222,7 +222,8 @@ openmesh,mr900-v1|\
openmesh,mr900-v2|\ openmesh,mr900-v2|\
openmesh,mr1750-v1|\ openmesh,mr1750-v1|\
openmesh,mr1750-v2|\ openmesh,mr1750-v2|\
tplink,cpe710-v1) tplink,cpe710-v1|\
tplink,cpe710-v2)
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0" ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
;; ;;
compex,wpj344-16m|\ compex,wpj344-16m|\

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -89,6 +89,7 @@ ath79_setup_interfaces()
tplink,cpe610-v1|\ tplink,cpe610-v1|\
tplink,cpe610-v2|\ tplink,cpe610-v2|\
tplink,cpe710-v1|\ tplink,cpe710-v1|\
tplink,cpe710-v2|\
tplink,eap225-outdoor-v1|\ tplink,eap225-outdoor-v1|\
tplink,eap225-outdoor-v3|\ tplink,eap225-outdoor-v3|\
tplink,eap225-v1|\ tplink,eap225-v1|\

11
target/linux/ath79/image/generic-tp-link.mk
View File

@ -391,6 +391,17 @@ define Device/tplink_cpe710-v1
endef endef
TARGET_DEVICES += tplink_cpe710-v1 TARGET_DEVICES += tplink_cpe710-v1
define Device/tplink_cpe710-v2
$(Device/tplink-safeloader-uimage)
SOC := qca9563
IMAGE_SIZE := 15680k
DEVICE_MODEL := CPE710
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
TPLINK_BOARD_ID := CPE710V2
endef
TARGET_DEVICES += tplink_cpe710-v2
define Device/tplink-eap2x5 define Device/tplink-eap2x5
$(Device/tplink-safeloader) $(Device/tplink-safeloader)
LOADER_TYPE := elf LOADER_TYPE := elf